Use enum cb_err as return type of all functions that aren't exposed
outside of this compilation unit. The checks if a function has returned
a failure are replaced with checks if the return value isn't CB_SUCCESS
which is equivalent if only those two values are used, but also detects
a failure if any unexpected value would be returned.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8c703f62babac31948d0878e91bd31b31bebc01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The intermediate ret variable isn't needed. espi_open_generic_io_window
only returns 0 or -1, so if ret is != 0, it has to be -1. This is a
preparation to use the enum cb_err type for the return values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia6c7f4cedf8c2defadcf4c4da1697a97c7b401f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
S0i3 is a low power state which reduces the power consumption to about
the level of the S3 suspend state where the DRAM is kept in a self-
refresh state and most of the rest of the system is powered down. So
everything that can be switched off in the S0i3 state should be switched
off in order to maximize the standby time.
BUG=b:210722314
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If445f5825dc7b795c95d73c061156cc485421ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The AOAC device states shouldn't be stored in GNVS, but be read from the
AOAC registers during runtime. Same for the EHCI controller's BAR0. The
location and size of the XHCI firmware can either be statically
determined at build-time or have coreboot generate ACPI objects that
contain the needed addresses. Since I can't easily test changes that
require booting to a desktop on Stoneyridge at the moment, only add
TODOs for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: I3691b05606b9430cb60923780a6131993a9887d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Split the southbridge code into a bootblock and a ramstage part to align
it more with Picasso and Cezanne. Also move the implementation of
fch_clk_output_48Mhz to the end of early_fch.c since it's not really
related to the functions that were previously around it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib660fbef8dc25ba0fab803ccd82b3408878d1588
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Split the code that gets called from the AGESA wrapper from the rest of
the FCH/southbridge code that directly interacts with the hardware.
Since the remaining parts of southbridge.c aren't used in romstage,
drop it from the list of build targets for romstage.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6197add0e1396a82545735653110e1e17bf9c303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Factor out enable_aoac_devices out of southbridge.c to aoac.c to align
Stoneyridge more with Picasso and Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ied4d821138507639cad1794f6c5017b5873b761f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Introduce and use an enum for the `power_profile` CMOS option. Add a
helper function that converts CMOS values into enum values. Using an
enum allows GCC to warn about switch statements using enum types for
their control expressions not handling all possible enum values, and
also improves readability.
Change-Id: I47a453ea12d164d26908a9944a89a481757e753c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <admin@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Rename `mainboard.c` to `smbios.c` as it only contains SMBIOS functions.
Rename `ramstage.c` to `mainboard.c` as it contains the mainboard chip
operations struct.
Change-Id: I9548ca72a7583de98f5b154e3381825bba00d5cf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <admin@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
We shouldn't be providing -I include paths to the root of the soc
specific directory. It allows for lazy includes that can collide,
but there's no way of knowing the winning path since the winning
path is determined by Makefile.inc parsing order.
This is taken from CB:41355
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45ed219e4e0cccf3d4f04cc70dc1ef77c518afff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is taken from CB:41355
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iba1948ae2332788b7e0ec9b4e3cea35c6608b152
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is taken from CB:41355
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I10a18efb92ac0c3cad31044156e32aa6afe1d4d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
These boards program the early GPIO table in bootblock, not romstage.
Change-Id: Iae9353d106483f30cefa2d035d96e63e4c127261
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Sean Rhodes <admin@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Update the parameter types of `intel_me_status()` to not be pointers.
Change-Id: I0fd577c49bec7a581c340fc2fcadcadd50b1a638
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Change the signature of MEI CSR functions to reduce pointer usage.
Change-Id: I1e4885daf8b3e11056421e663e67c8f360699a98
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Wrap bitfield structs in unions to reduce pointer usage. This adds more
uses of the `mei_dump()` function, only used for debugging. Refactoring
the MEI CSR functions to not use pointers is done in a follow-up.
Change-Id: I4defbb8c0e7812bf95c672ce529959f67c34537a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
There's no need to use typedefs for enum types. Get rid of it.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I830d95018b33fe6ab7e2c37ebf15bb1df6ceec38
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
There's no need to use typedefs for struct types. Get rid of them.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I109bd690500a9f03b9da0fd72044be79abf660d3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The RTC on Cezanne is an unstable wake source when the system is in
S0i3. We instead need to use an internal timer that triggers a GPIO that
acts as a wake source. This change provides the ACPI necessary to allow
the OS to manage the wake source.
BUG=b:209705576
TEST=Boot guybrush with this patch and several OS patches. Verified the
OS sets the correct wake bit, the system correctly suspends
and resumes, and the wake source is correctly accounted for.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1f14d14df5d30d48d244416f2ec8c10ac5c8040e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
We want ACPI to own the GPIOs. This will stop the GPIOs from being
exposed to the OS driver.
BUG=b:209705576, b:210694108
TEST=Dump ACPI table and verify GPIO are no longer in _CRS.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8d2af41e1d04b98f0e3e19a95d7b91d08ecdf17b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Both the Picasso PPR #55570 Rev 3.18 and the Cezanne PPR #56569 Rev 3.03
define bit 9 of the PM_RST_STATUS register as internal Thermal Trip
reset status bit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ida8b13fe62b16c18fc9924520b83220e73eca624
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Use the `popcnt()` helper instead of manually counting the number of set
bits in the first `CONFIG_MAX_CPUS` bits with a loop. Also, use unsigned
types to store the number of active/total cores.
Change-Id: Iae6b16991fcf07c9ad67d2b737e490212b8deedd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Setup eSPI to dedicated alert per the latest schematic changes.
DUT won't hang up at power on boot due to eSPI alert is triggerred
unexpectedly.
BUG=b:199458949,b:203446084
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage
test power on/reboot on DUT (6 units) each 10 loops->pass
Change-Id: I55cda7a1af22e555a4f55285cb7e337a69e6c234
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Felwinter has non-stylus sku. Add a FW_CONFIG field to indicate
stylus presence and add a probe statement to the devicetree for the
corresponding device.
BUG=b:208937710
TEST=non-stylus doesn't register garage driver.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I06a2c125f2b5a73f9f7c27bf1b20ff8712664809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Address Mode 0: Physical Address, bit 63~56: 0x00
Address Mode 1: Relative Address to entire BIOS image, bit 63~56: 0x40
Address Mode 2: Relative Address to PSP/BIOS directory, bit 63~56: 0x80
Address Mode 3: Relative Address to slot N, bit 63~56: 0xC0
It is the expanding mode for simple relative address mode, for which
address_mode equals 1.
Only mode 2 is added. We need to record current table base address and
calculate the offset. The ctx.current_table is zero outside the
table. When it goes into the function to integrate the table, it
should backup the old value and get current table base. Before it goes
out the function, it should restore the value.
If the table address mode is 2, the address in each entry should be
also add address mode information. If not, the address mode in entry
is meanless.
The old mode 0,1 should be back compatible.
Change-Id: I29a03f4381cd0507e2b2e3b359111e3375a73de1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Preloading files before vboot runs and using them after vboot has
finished will result in the wrong files getting used. Disable
cbfs_preload to avoid this behavior.
BUG=b:179699789
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7698b481a73fb24eecf4c810ff8be8b6826528ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This change consolidates the COOP rules. Co-op in theory works in all
x86 stages now, but it hasn't been enabled yet.
BUG=b:179699789
TEST=Boot guybrush to OS and verify preloads still work
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1197406d1d36391998b08e3076146bb2fff59d00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Move board-specific selects out of common configuration and add them to
each board where necessary.
Change-Id: I2b8a9906671b327bec249f3d16cba3ba80a95669
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: I9201b5bcbf53422cefc6027a0d67fcf2201b14a4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move board-specific selects out of common configuration and add them to
each board where necessary.
Change-Id: I70ab37588a6b08a0cc194469fd2642b3cfefe301
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: Ifccf2b3521d84f6a678872bbccf9bf390c25ce37
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This patch adds the following list of changes:
1. Create a new devicetree for adlrvp-n and copy contents of adlrvp-p
devictree.
2. Add support for 2 mainboards as ADL-N board with default EC (Windows
SKU) and Chrome EC (Chrome SKU) and copy overridetree contents from
adlrvp-p.
3. Add mainboard Kconfig to Kconfig.name file
4. Handle mainboard names in Kconfig file for ADLRVP N
5. Add config options to pick the adlrvp_n devicetree
Change-Id: I4abf3bf62ec0398ae75e21575a2fab0d44b5c7ad
Signed-off-by: Usha P <usha.p@intel.com>
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The MBOX_BIOS_CMD_DRAM_INFO PSP mailbox command is only available on the
first generation of PSP mailbox interface and not on the second
generation. The second generation of the PSP mailbox interface was
introduced with the AMD family 17h SoCs on which the DRAM is already
initialized before the x86 cores are released from reset.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97b29fdc4a71d6493ec63fa60f580778f026ec0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This should make it a bit clearer what the differences between
SPI_CNTRLR_DEDUCT_OPCODE_LEN and SPI_CNTRLR_DEDUCT_CMD_LEN and the
corresponding functionality in spi_crop_chunk are.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I809adebb182fc0866b93372b5b486117176da388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In the case of deduct_cmd_len being set and the adjusted cmd_len >=
ctrlr_max, ctrlr_max wasn't being adjusted and still had the value of
ctrlr->max_xfer_size. Handle this edge case (which we should never run
into) by setting ctrlr_max to 0 and printing a warning to the console.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9941b2947bb0a44dfae8ee69f509795dfb0cb241
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Felix Held