* Move cbmem.c to cn81xx folder
* Store CBMEM below 4 GiB
* Make sure CBMEM doesn't overlap with ATF scratchpad
* Fix ATF scratchpad not marked as reserved due to wrong calculation
* The scratchpad is the last 1 MiB at the end of DRAM.
Tested on Cavium CN81xx EVB:
The ATF scratchpad is now marked reserved and the configuration tables
are located below 4 GiB. Linux still boots.
Change-Id: Ibbc8b586f04bd6867c045f5546b32a77c057ac74
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27955
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Store initrd offset as 64bit integer.
Tested on Cavium CN81XX EVB: The initrd could be loaded when placed
above 4GiB. Previously it failed to find the initrd.
Change-Id: I5d1ae860ae4a4465546bc0ef89937d611d1e56ab
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/28002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Allow for shared dram configuration by introducing a new table
that collapses the common settings after removing the part
numbers. When employing this scheme the part number comes
from CBI.
BUG=b:112203105
TEST=Placed part number in cbi. Faked out memory sku id. And enabled
DRAM part num always in cbi. Everything checked out.
Change-Id: I5229695ce3eb686421b89ac55d8df4b9fcec705c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Options that were deemed unneceesary on other code reviews have
been removed from the layout files. In addition, the checksummed
range has been extended to cover sata_mode and gfx_uma_size.
Change-Id: Id9e904f447809231806a786e39ed638f21e1bc5a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Nico Huber <nico.h@gmx.de>
I ported ga-h61m-s2pv based on the two Gigabyte b75m boards.
Based on another mainboard's code review comments, this patch
improves the code quality of these three similar boards.
ga-h61m-s2pv is tested and confirmed to be working, but I cannot
say the same regarding the other two mainboards as I do not have them.
Change-Id: Ib7747cceb5ba56f791677204cdc4c54c129c70c3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Set payload to NULL in case of decompression errors.
Fixes the attempt to boot a kernel that couldn't be decompressed.
Change-Id: I3a602b0e90923a0b5a3683c4a0adf9e4733d5a2a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Curley brace expansion is a bash-ism, so we can't use it for the
u-root command list.
This unfortunately also breaks the current Kconfig option since the
list needs to be separated by space instead of commas.
Change-Id: I429a52c1673e29b7180ee6f53deaa7a551a1a9b3
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/27967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
1. Add new device IDs for SATA, GT and Northbridge to pci_ids.h
2. Add entry to identify CFL U GT and CPU to respective files
3. Add entry to identify CFL U to report_platform.c
BUG=none
BRANCH=none
TEST=Boot to CFL U RVP board with this patch and check if coreboot is
able to enumerate various devices and display correct component names properly
in serial logs.
Change-Id: I47c97fb9eb813587cd655e2bce05a686091619ed
Signed-off-by: Maulik <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/27522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Accesses to architectural registers should be really fast -- they're
just registers, after all. In fact, the arm64 architecture uses them for
some timing-senstive uses like the architectural timer. A read should be:
one instruction, no data dependencies, done.
However, our current coreboot framework wraps each of these accesses
into a separate function. Suddenly you have to spill registers on a
stack, make a function call, move your stack pointer, etc. When running
without MMU this adds a significant enough delay to cause timing
problems when bitbanging a UART on SDM845.
This patch replaces all those existing functions with static inline
definitions in the header so they will get reduced to a single
instruction as they should be. Also use some macros to condense the code
a little since they're all so regular, which should make it easier to
add more in the future. This patch also expands all the data types to
uint64_t since that's what the actual assembly instruction accesses,
even if the register itself only has 32 bits (the others will be ignored
by the processor and set to 0 on read). Arm regularly expands registers
as they add new bit fields to them with newer iterations of the
architecture anyway, so this just prepares us for the inevitable.
Change-Id: I2c41cc3ce49ee26bf12cd34e3d0509d8e61ffc63
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When we first created the arm64 port, we weren't quite sure whether
coreboot would always run in EL3 on all platforms. The AArch64 A.R.M.
technically considers this exception level optional, but in practice all
SoCs seem to support it. We have since accumulated a lot of code that
already hardcodes an implicit or explicit assumption of executing in EL3
somewhere, so coreboot wouldn't work on a system that tries to enter it
in EL1/2 right now anyway.
However, some of our low level support libraries (in particular those
for accessing architectural registers) still have provisions for
running at different exception levels built-in, and often use switch
statements over the current exception level to decide which register to
access. This includes an unnecessarily large amount of code for what
should be single-instruction operations and precludes further
optimization via inlining.
This patch removes any remaining code that dynamically depends on the
current exception level and makes the assumption that coreboot executes
at EL3 official. If this ever needs to change for a future platform, it
would probably be cleaner to set the expected exception level in a
Kconfig rather than always probing it at runtime.
Change-Id: I1a9fb9b4227bd15a013080d1c7eabd48515fdb67
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
CNTFRQ_EL0 is a normal AArch64 architectural register like hundreds of
others that are all accessed through the raw_(read|write)_${register}()
family of functions. There's no reason why this register in particular
should have an inconsistent accessor, so replace all instances of
set_cntfrq() with raw_write_cntfrq_el0() and get rid of it.
Change-Id: I599519ba71c287d4085f9ad28d7349ef0b1eea9b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27947
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rotor is dead, long live [PROJECT NAME REDACTED]!
Change-Id: Ia9308944257255e077a44c1df262c7f49c69890c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27964
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add 3 new Kconfig options:
DRAM_PART_NUM_IN_CBI
DRAM_PART_NUM_ALWAYS_IN_CBI
DRAM_PART_IN_CBI_BOARD_ID_MIN
These control whether to 1. attempt to use CBI at all 2. always use cbi
and 3. conditionally use cbi based on board id. The intent is that the
MIN variant would be used for the tranisition period then cut over to
ALWAYS after full transition. Since multiple OEMs have different
schedules these options are there to bridge the gap. yorp. bip, and
octopus build targets would never flip DRAM_PART_NUM_IN_CBI, but in case
someone does the MIN values are 255 to always take the old path.
BUG=b:112203105
TEST=Set correct part number on phaser during testing.
Change-Id: If9a0102806d78e89330b42aa6947d503a8a2deac
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Within procedure arch_write_tables, the pointer "rom_table_end" is updated
every time a table is created. However, after creating last table, pointer
rom_table_end is not used, though it is updated. Add a "(void)rom_table_end;"
at the end to avoid the static analysis error.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I8a34026795c7f0d1bb86c5f5c0469d40aa53994a
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Within procedure save_bsp_msrs, the structure pointer "msr_entry" is updated
every time procedure save_msr() is called. However, after the last call of
save_msr(), "msr_entry" is not used, thus causing a static analysis error.
Add a "(void)msr_entry;" at the end to avoid the static analysis error.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: If0fb336fbf49eec3da255fadbe38b3a38768d0cf
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Careena EVT SanDisk EMMC sku has high fail rate of 0x5B reboot failure.
It'll need to increase 1.8V EMMC CLK/CMD, Data driving strength for
this issue.
CLK[6:4]
CMD,DATA[3:1]
original register value: 0x6B
enhanced: 0x7F
BUG=b:111964336
BRANCH=master
TEST=emerge-grunt coreboot
Change-Id: I3db38ff12c566c258895c6643008a0472ca528bb
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/27816
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In procedure spi_flash_cmd_erase(), parameter "len" is not validated and
could lead to the return of an invalid (non-initialized) value. Validate
the parameter early on.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I0b5129a15c9e0ea45f4dba4ab0729196cb64699b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
In procedure allocate_cpu_devices(), if structure pointer new is null skip
using the pointer. Add a "continue;" to skip using the pointer.
The issue was found by static analysis tool.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I7011fbfa0725f22a6dfbca6752e668eddac3463c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27951
Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Micron material that was broken has long since been fixed that
required this option. glkrvp had these stale entries and were
subsequently copied to octopus. Remove the need for this option.
BUG=b:35581751
Change-Id: Id73584367c2ad0e4958b5ea0f04a28e5fc82d085
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27959
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If TSEG_BASE is not TSEG_SIZE aligned the SMRR settings are invalid, therefore
guard against this.
Change-Id: I48f55cdac5f4b16b9a8d7a8ef3a84918e756e315
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
RK3288 has always been notoriously low on SRAM, to the point where its
boards have less than 100 bytes left in both their bootblock/verstage
sections. This becomes a problem every time we try to add a tiny amount
of code to common coreboot interfaces that are included in them.
This patch manages to add another KB to each, one from the CBMEM console
(which now might get cut off a bit, but that's life) and one by moving
the TTB_SUBTABLES to PMUSRAM. PMUSRAM is a weird world where write
accesses must always be exactly 4 bytes long or they hang the CPU, so we
mostly ignore it... but thankfully, page table entries are exactly 4
bytes long and that's the only thing we write to this region, so it
works out in this case.
Change-Id: I5aecd66db40b3f52299b270322b8c8784dbe7e6f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Use bitfields to pack the struct more tightly.
Change-Id: If1e7a5a3a9504327f987403ec0a7b79b2383792a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27815
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The implementation of wpcd376i in coreboot is based on the
superiotool output which apparently was incorrect. This
patch refines the implementation to match the datasheet.
Change-Id: I0108e912dc4f603276074f0999c6d3146c3b13f9
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Within procedure cea_hdmi_block, the variable "b" is used as an index into
a buffer of EDID bytes. At the end, it's incremented but not used, thus
causing a static analysis error. Add a "(void)b;" at the end to avoid the
static analysis error.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: Ibd0b4a21bf82fcc46a627bc75564a850b7374989
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27929
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Skylake SoC code now sets the icc_max based on the CPU SKU, so we
should not hard-code it in the device tree.
BUG=b:110890675
BRANCH=None
TEST=boots on atlas
Change-Id: I7eb3499b7bea9ab2c49e1f299e2dbb688c8d1c33
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/27791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
In procedure tpm_unmarshal_response(), variable "rc" is used early to
decide if it should return NULL. Later however, the code proceeds to its
end even if one subroutine reports error. If "rc" is not 0, report that
there was a partial error in the procedure.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I7575bc75104fd97f138224aa57561e68f6548e58
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27931
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=none
TEST=compiled on grunt and made sure USB still works in depthcharge
Change-Id: I972f4604bb5ff3838cb15f323c5a579ad890ecf5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
If a target is interrupted in the middle of writing an output file, the
file could be left in a corrupt state. A subsequent make invocation will
see the file as up to date and can cause very confusing errors.
BUG=b:112267918
TEST=Made a target fail before completion and verified make deleted the
output file.
Change-Id: I865827ea769b4dffa638d4324fc7284f6cb2ddc0
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add the ability to specify the fwid version via a file instead of
via config. This makes it so when doing an incremental build all
objects are not invalidated when bumping the fwid.
The coreboot ebuild will create this file to pass the latest version.
BUG=b:112267918
TEST=ran dmidecide -t 0 and verified version was present
Change-Id: I955106efd648a75a1311f24ede46bd238d1517e0
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This configures the ACPI FADT perferred power management profile to
PM_MOBILE instead of PM_DESKTOP.
I'm not sure what impact this actually has. I just noticed the other
boards have it set.
BUG=b:110971913
TEST=Made sure SYSTEM_TYPE_LAPTOP shows up in coreboot.config
Change-Id: Iea1b8359b80d167e69745358f543f025713294ba
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
By setting this register in bootblock AmdInitEnv will no longer trigger
a reset in romstage. This fixes a few vboot test failures and also
speeds up boot time.
BUG=b:111610455
TEST=Built grunt and made sure bootblock only happens once on cold boot,
and S3 resume.
Change-Id: Ie19f7a14deaef45ac63156bec6946273c1b9447e
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Philipp Deppenwiese