After running the MRC blob print out some information
on the training: MRC version, number channels, DDR3
type, and DRAM frequency.
Example output:
MRC v0.90
2 channels of DDR3 @ 1066MHz
Apparently there are two dunit IOSF ports -- 1 for each
channel. However, certain registers really on live in
channel 0. Thus, there was some changes to dunit support
in the iosf area.
BUG=chrome-os-partner:22875
BRANCH=None
TEST=Built and booted bayleybay in different configs.
Change-Id: Ib306432b55f9222b4eb3d14b2467bc0e7617e24f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172770
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4882
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
If a payload is compiled to use SSE instructions it will
fault with an undefined opcode because SSE instructions weren't
enabled. Therefore enable SSE instructions at runtime.
BUG=chrome-os-partner:22991
BRANCH=None
TEST=Built and booted with SSE enabled payload. No exceptions seen.
Change-Id: I919c1ad319c6ce8befec5b4b1fd8c6343d51ccc1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172642
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4881
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Add suport for verifying the ramstage with vboot
during romstage execution. Along with this support
select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to
cache the relocated ramstage 1MiB below the
top end of the TSEG region.
BUG=chrome-os-partner:23249
BRANCH=None
TEST=Built and booted with CONFIG_VBOOT_VERIFY_FIRMWARE=y
selected.
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I355f62469bdcca62b0a4468100effab0342dc8fc
Reviewed-on: https://chromium-review.googlesource.com/172712
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4880
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The ASL compiler warned about "Control Method should be made Serialized
(due to creation of named objects within)". This commit eliminates the
warnings by changing those NonSerialized into Serialized.
Change-Id: I639e769cf7a9428c34268e0c555a30c7dee1e04c
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/5189
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
spd.bin can reside anywhere in CBFS, and we only use CBFS APIs to
access and read it. As such, there is no need to hardcode it, and it
can collide with mrc.bin or mrc.cache on some boards. Do not use a
specific position for spd.bin, but instead let cbfstool find the
optimal placement.
Change-Id: I496094d3c0de708813494095b7ac4be8addb4112
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5210
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Pull-ups and pull-downs can be active on functional pins. Add configs
for these options so they can be specified on board GPIO maps.
TEST=Manual on bayleybay. Verify that platform boots to payload load.
BUG=chrome-os-partner:22863
Change-Id: Ie4f77d8ce812f086cc8fe5a6bfcac59669f56f92
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172766
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5209
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
If the SerialIO devices are put into ACPI mode then it is possible
to use ACPI to instantiate the touchpad in the kernel without
needing to have a platform level driver to do the binding.
This is the "new way" of describing on-board I2C devices and the
upstream kernel is starting to add ACPI IDs to drivers so they can
be used in this fashion. For the Cypress touchpad use a generic
ACPI ID of "CYPA0000" to describe it.
In order to support the proper scoping of the touchpad device under
the appropriate I2C controller device the mainboard.asl file needs
to be included after pch.asl so the I2C device exists.
Change-Id: I81e053d27be478f3a19b6f9b13cd2b4fabcb88c0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5194
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove the bit of code that was putting the SerialIO devices into
D3Hot state when they are switched from PCI to ACPI mode. Instead,
add the appropriate ACPI Methods to allow the kernel to control the
power state of the device.
The problem seems to be that if the device is put in D3Hot state
before it is switched from PCI to ACPI mode then it does not properly
export its PCI configuration space and cannot be woken back up.
Adding the ACPI Methods for _PS0/_PS3 allows the kernel to transition
the device into D0 state only when it is necessary to communicate with
the device, then put it back into D3Hot state.
Change-Id: I2384ba10bf47750d1c1a35216169ddeee26881df
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5193
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These are almost one-to-one copies from pci_device.c. However,
devicetree has not been enumerated yet and we have no console.
Change-Id: Ic80c781626521d03adde05bdb1916acce31290ea
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5196
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
The files affected do not make any PCI configuration calls.
If they did, the more correct includes would be pci_ops.h,
pci_defs.h and pci_ids.h.
Change-Id: I3e7f009371be6ea50318eaabf0c15500cb3f1210
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5200
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Adding PCI functions for romstage in pci.h breaks ARMv7 build without
this. Also fix two related includes to use pci_def.h instead.
Change-Id: I5291eaf6ddf5a584f50af29cf791d2ca4d9caa71
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5199
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
There were ASL compiler warnings about "Size mismatch". This commit
eliminates the warnings by changing the ASL declarations of those
fields.
Change-Id: If851ed4892ef6c96acbff861abd7001ab67d9d66
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/5190
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Refactor Makefile build system as decompartmentalise armv7a and i386
targets from crossgcc.
Change-Id: If93f62050810ba594c9925a9eb8ba9d04bc76459
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4008
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Some out-commented code contained variables which changed name.
This commit fixes the "problem".
Change-Id: I8d9168c9f4b2cb6810b3e4dfeff2155f3c08357d
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/5187
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
This platform has a hard reset button
Change-Id: Ic4d2f9382b6770654eea8842a37ad38cf12de459
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/5097
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Add cool-n-quiet functionality which allows the OS to dynamic
alter CPU voltage and frequency change in order to save power
e.g. when the CPU load is low.
Change-Id: I4c895a56bcf571d4276af192aeef87d120143063
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/5186
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
It is inappropriate for chipset code to be redefining
types -- especially NULL to a non-pointer type. There's
only one non-straight forward change. A condition
being checked was '!ptr_type == NULL' (0 as int). That
check is actually 'ptr_type != NULL'.
Change-Id: Iab5733e5a573baba6fec94e0c955ba4fad72c836
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5088
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Bay Trail has the following types of resets it supports:
- Soft reset (INIT# to cpu) - write 0x1 to I/O 0x92
- Soft reset (INIT# to cpu)- write 0x4 to I/0 0xcf9
- Cold reset (S0->S5->S0) - write 0xe to I/0 0xcf9
- Warm reset (PMC_PLTRST# assertion) - write 0x6 to I/O 0xcf9
- Global reset (S0->S5->S0 with TXE reset) - write 0x6 or 0xe to
0xcf9 but with ETR[20] set.
While these are documented this support currently provides support
for 2nd soft reset as well as cold and warm reset.
BUG=chrome-os-partner:23249
BRANCH=None
TEST=Built and booted.
Change-Id: I9746e7c8aed0ffc29e7afa137798e38c5da9c888
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172710
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4878
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
There are currently 4 SKUs:
0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz
0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz
0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz
0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz
Add each of the 4 spds to the build, and use the proper
parameters to MRC to use the in-memory SPD information.
BUG=chrome-os-partner:22865
BRANCH=None
TEST=Built. Noted 1024 bytes of SPD content.
Change-Id: Ife96650f9b0032b6bd0d1bdd63b8970e29868365
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172280
Reviewed-on: http://review.coreboot.org/4872
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
It's helpful to have a lot of the early init happen
before the handoff to mainboard. One example of this
need is having the BARs programmed so that the mainboard
can read board-specific gpios.
BUG=chrome-os-partner:22865
BRANCH=None
TEST=Built. Booted and saw console outout in bayleybay
mainboard.
Signed-off-by; Aaron Durbin <adurbin@chromium.org>
Change-Id: I030d7b4f9061ad7501049e8e204ea12255061fbe
Reviewed-on: https://chromium-review.googlesource.com/172290
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4871
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
- Add functions to peek at GPIO input pad values (need to be used from
romstage for board ram_id GPIOs)
- Modify UART GPIOs to use existing fn-assignment function
TEST=Manual. Add debug print and verify that GPIO functions return input
values. Also, verify UART still functions in romstage.
BUG=chrome-os-partner:22865
Change-Id: Ib2e57631c127a592cfa20ab6e2184822424e9d77
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172189
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4870
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Set the BSP to operate at max frequency early in romstage.
The call to punit_init() is when the frequency actually ramps as
that makes the punit actually start working.
BUG=chrome-os-partner:22857
BRANCH=None
TEST=Built and booted. Noted operating frequency status is max.
Change-Id: Icfd9e5c7682aa21fc740bd687607ca6a66597d5e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172131
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4869
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The caching policy for romstage was previously using a 32KiB
of cache-as-ram for both the MRC wrapper and the romstage stack/data.
It also used a 32KiB code cache region. The BWG's limitations for
the code and data region before memory is up was wrong. It consists
of a 16-way set associative 1MiB cache. As long as enough addresses
are not read there isn't a risk of evicting the data/stack.
Now create a 64KiB cache-as-ram region split evenly between romstage
and the MRC wrapper. Additionally cache the memory just below
4GiB in CBFS size. This will cover any code and read-only data needed.
BUG=chrome-os-partner:22858
BRANCH=None
TEST=Built and booted quickly with corresponding changes to MRC warpper.
CQ-DEPEND=CL:*146175
Change-Id: I021cecb886a9c0622005edc389136d22905d4520
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172150
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4868
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Like the bunit and dunit, add the punit accessor functions.
BUG=chrome-os-partner:23085
BRANCH=None
TEST=Built.
Change-Id: Ifd7184dfca8c0491c107bc1c562ea1ded444e372
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171931
Reviewed-on: http://review.coreboot.org/4867
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
- Set config0 defaults for hysteresis disable, pad bypass, etc.
- Set config1 power-on defaults.
- Set pad_val for input as default.
BUG=chrome-os-partner:22863
TEST=Manual. Enable GPIO_DEBUG and verify pad registers are set
according to expectation. Also verify bayleybay still boots to payload
loading.
Change-Id: I0f1c9e4d4f39c5c56d7e14a82eb4825612e19420
Reviewed-on: https://chromium-review.googlesource.com/171903
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4866
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
We should not have x86 specific includes in lib/.
Change-Id: I18fa9c8017d65c166ffd465038d71f35b30d6f3d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5156
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Needs printk and is not a console core function.
Change-Id: Id90a363eca133af4469663c1e8b504baa70471e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5155
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These options seem to control the behavior of the encoder/decoder,
with comments citing a trade-off between memory usage and performance.
I removed these in a separate patch to make reverting in the future
easier, if we find these options are useful.
Change-Id: I24cb7101b89e60f4fb96777e3681c03d2a62e3d5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5084
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Rather than using [hn]to[nh] whenever accessing a member of the CBFS
header, deserialize the header when opening the CBFS image. The header
is no longer a pointer inside the CBFS buffer, but a separate struct,
a copy of the original header in a host-friendly format. This kills
more of the ntohl usage.
Change-Id: I5f8a5818b9d5a2d1152b1906249c4a5847d02bac
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5121
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Basic ACPI support for this old platform. Created by copying and
tweaking similar motherboard ACPI implementations in coreboot.
Works reasonably well under Linux, providing HPET-timers
and more under linux (tested under OpenSUSE 12.2 kernel 3.4.63-2.44).
Not tested under Windows.
Change-Id: I69431be962a0d272db398ecf4ac9f0249de8ebab
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/5185
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There are EHCI compatible host controllers on ARM without PCI bus
architecture. Currently we have not come across one with the debug
capability though.
Change-Id: I8775c9814f6fdf8754f97265118a7186369d721d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5175
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
USB device end toggles data PID when we ACK'd the zero-length data
packet. As USB host we need to toggle data PID too or the next data
received would get discarded.
Change-Id: I3203bc874c7ded9244c7548a666d7041a0fbb379
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4775
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This claim is useless when done before EHCI controller reset. Code in
usbdebug_init_() already sets this properly after reset, see use of
DBGP_OWNER.
Change-Id: Ic17493fe4edbbbed6ebcbef35a264fbf188f1fba
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4709
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Read from USB endpoint_in 8 bytes at a time, the maximum what
EHCI debug port capability has to offer.
Change-Id: I3d012d758a24b24f894e587b301f620933331407
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4700
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This was designed as a micro-optimization for x86, but it is only used
once. Let the compiler decide if optimizing this is worth the effort.
Change-Id: I5939efa34f0e9d16643893ca04675247842e7db5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5085
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
LzmaEnc.c was full of shadow definitions. Luckily, shadow definitions
were not used after the scope in which they were redefined, so it is
possible to just remove them.
Tested by successfully booting qemu i440fx to grub2 payload.
Change-Id: I01d44db59882114ffe64434b655b931f3beec8e2
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5082
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now that we can set CC to an arbitrary compiler, fix issues that clang
finds. Luckily, there were only two trivial errors.
Change-Id: I0fd1f0f263a8ab7004f39cd36ed42d1a1cba5c04
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5081
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
LDN is 8-bit but coreboot squeezes unrelated info: VLDN in this field.
Increase to 16-bit to handle this.
Change-Id: I97af1b32dcfaed84980fa3aa4c317dfab6fad6d8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5165
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Be more conservative and only add VGA devices' prefetchable
resources as write-combining in the address space. Previously
all prefetchable memory was added as a write-combining memory
type. Some hardware incorrectly advertises its BAR as
prefetchable when it shouldn't be.
A new memranges_add_resources_filter() function is added
to provide additional filtering on device and resource.
Change-Id: I3fc55b90d8c5b694c5aa9e2f34db1b4ef845ce10
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5169
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
It was a typo.
Change-Id: I82964b5ed7e7749ba141aeb3ee8dc4c107bcd7a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5127
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Alexandru Gagniuc