Commit Graph

3434 Commits

Author SHA1 Message Date
Harald Gutmann 62cfe169fa ChangeLog:
Add initial ACPI support for M57SLI.
	Activates/Enables:
		* native Coreboot ACPI for M57SLI
		* Soft-Power-Off
		* PowerNow!
		* High Precision Event Timer
		* Windows booting with ACPI support

Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19 12:03:40 +00:00
Ward Vandewege ecf4ef0b26 Make sure the address variable is initialized to zero - it is only set when a
[base address] parameter is supplied on the command line... This patch fixes
random segfaults when using 'cbfstool add'.

Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4363 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-18 16:38:35 +00:00
Harald Gutmann da8336176e Change Log:
Fix interrupt handling in mptable.c on M57SLI.

Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-18 10:05:41 +00:00
Harald Gutmann b735f85379 Change Log:
Activate HIGH_TABES on M57SLI

Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4361 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-18 09:46:11 +00:00
Myles Watson 82bc9bc31e Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.
Abuild tested with -C.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-17 16:38:43 +00:00
Marc Jones aac8dc81c5 Patch AMD Fam10 C2 for errata 327, 344, 346, 354, 351.
Removed c2 HT Phy 520a/530a reserved bit.

Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4359 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-17 15:33:57 +00:00
Marc Jones cbefc238c5 Maximilian Thuermer found a bug where the HT link capability code was always
updating the passed value to the next link offset even when it was on the
requested link (cap_count).

Maximilian also found a bug where the linktype was still getting attributes
even when it wasn't initialized.

This should fix the HT problems for Fam10 C2. There are still issues with the
microcode which need to be resolved.

Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4358 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-16 23:02:39 +00:00
Ronald G. minnich d41de2ea7a These changes implement car in qemu. The implementation is in several
ways superior to v3, while lacking its completeness. But, one nice 
thing: no more included .S or .c files. It's all separate compilation. 
That should allow our Makefiles to work much better.

Note that the current non-CAR implementation is the default and 
continues to work (tested FILO boot to Linux on both CAR and non-CAR).

Index: src/mainboard/emulation/qemu-x86/Config.lb
Change this to be sensitive to USE_DCACHE_RAM. All settings etc. that 
depend on this variable are grouped in one if, and the other parts 
(romcc etc.) are in the else. This change is a model of how we should be 
able to do other motherboards.

Index: src/mainboard/emulation/qemu-x86/Options.lb
add needed options. 

Index: src/mainboard/emulation/qemu-x86/failover.c
remove code inclusion from this not-yet-used file. 

Index: src/mainboard/emulation/qemu-x86/rom.c
This is the entry point for the rom-based code. Called stage1.c in v3. 

Index: src/lib/Config.lb
change initobject to a .o from a .c; this fixed a build problem. 

Index: src/pc80/serial.c
make uart_init non-static. 

Index: src/pc80/Config.lb
add initobject

Index: src/arch/i386/init/entry.S
Entry point. Unify a bunch of files that were fiddly lttle includes. From v3. 

Index: src/arch/i386/init/ldscript.ld
new file. The goal is to hang all init changes for CAR here, to minimize other changes to any
other ldscript. Besides, putting this in init makes sense; entry and car are manage init. 

Index: src/arch/i386/init/car.S
generic i386 car code from v3. 

Index: src/arch/i386/init/ldscript_fallback_cbfs.lb
Fix what looks like a bug: this was not including the init.text section. 

Index: targets/emulation/qemu-x86/Config.lb
push up the console loglevel. qemu is for debugging so we might as well 
get all the debugging we can. 

Index: targets/emulation/qemu-x86/Config-car.lb
For CAR bullds. 

Signed-off-by: Ronald G. minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-16 15:02:52 +00:00
Ioannis Barkas 3ba18a67eb Fix typo in Winbond W83977TF register listing.
Signed-off-by: Ioannis Barkas <tripl3fault@yahoo.com>
Signed-off-by: Nikos Barkas <levelwol@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4356 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-12 14:20:27 +00:00
Myles Watson 124d8767da Fix s2895 failover booting.
Abuild tested and boot tested on s2895 and serengeti_cheetah.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-11 18:27:41 +00:00
Stefan Reinauer 9ca6ed548e this port is horribly broken and should not have been checked in. This patch
gets us through config, but it fails during build because the original patch
duplicated some files for VIA systems.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-09 15:22:47 +00:00
Ronald G. Minnich a88db7bb87 Fix a little white space issue. Also, don't copy the rom image
if it is already in its correct location. 

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
   
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-09 14:44:37 +00:00
Uwe Hermann e8c6f86b80 Add (commented) line for VGA blob adding (CBFS version) to simplify things for users a bit.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4352 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-08 13:05:47 +00:00
Ronald G. Minnich 6ce41c06cc This is transition code for cbfs to implement
cbfs files at fixed addresses.

I call this transitional as the approach I am taking is to add
capability to cbfstool but not change code in a way that will break
existing usages. Later, once we're sure nothing has broken, we can start to 
smooth the edges. 

Right now, fixed address file are only supported via the add command. 

There is one additional command syntax, so, example:
cbfstool add rom romstrap optionrom 0xffffd000

Will add the file to that fix location for a romstrap.

The assumption is that the ROM is based at the end of a 32-bit address
space. As you can see from the code, that assumption can easily be
over-ridden, if we ever need to, with a command option.

Here is one example output result.

rminnich@xcpu2:~/src/bios/coreboot-v2/util/cbfstool$ ./cbfstool x.cbf print
x.cbf: 1024 kB, bootblocksize 32768, romsize 1048576, offset 0x0
Alignment: 16 bytes

Name                           Offset     Type         Size
h                              0x0        optionrom   251
                             0x130      free         917120
h3                             0xdffe0    optionrom    251
                             0xe0110    free         97960

The way this is implemented is pretty simple. I introduce a new
operator, split, that splits an unallocated area into two unallocated
areas. Then, allocation merely becomes a matter of 0, 1, or 2 splits:
0 split -- the free area is the exact fit
1 splits -- need to split some off the front or back
2 splits -- need to split off BOTH the front and back

I think you'll be able to see what I've done. I call this transitional
because, in the end state, we only need one allocate function; for now
I've left two in, to make sure I don't break compatibilty.

Why I like this better than ldscript approach: I like having the
ROMSTRAP located by cbfs, not linker scripts. For one thing, it makes
romstrap visible as a first class object. I think I would have latched
onto a problem I was having much more quickly had I remembered the
ROMSTRAP. It gets lost in the linker scripts.

At this point, we should be able to start removing special ROMSTRAP location 
code from linker scripts. 

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4351 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-08 03:33:57 +00:00
Uwe Hermann d64f403f8e A bunch of additional EPIA-M700 cleanups and also some non-cosmetic changes:
- Make get_dsdt script executable.

 - Rename DrivingClkPhaseData.c to driving_clk_phase_data.c.

 - Set proper IRQ_SLOT_COUNT value in the hope that the '14' from irq_table.c
   is correct.

 - Fix broken or incorrect #include names to increase likelyhood of a
   successful compile.
 
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4350 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-07 14:38:32 +00:00
Uwe Hermann 0ffff3434e First bunch of coding style and consistency cleanups for the
EPIA-M700 target.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4349 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-07 13:46:50 +00:00
Carl-Daniel Hailfinger cff071ab0e When I started refactoring mainboard Config.lb, I added two different
files for targets without failover:
src/config/nofailovercalculation.lb (64 kB XIP)
src/config/nofailovercalculation128.lb (128 kB XIP)
Targets with other XIP sizes were ignored.

This patch moves XIP size back into mainboard code.

Benefits from this patch:
- src/config/nofailovercalculation128.lb is no longer needed
- Targets with XIP sizes besides 64k and 128k benefit from refactoring
- Conceptually, this makes the include files pure calculation files
without settings.

Abuild tested.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 16:50:38 +00:00
Patrick Georgi a7d8ae3b1d Make failover larger and decrease fallback's size so the total stays the
same. The errata need some extra room in failover.

Trivial and abuild tested


Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4347 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 12:19:59 +00:00
Marco Schmidt a774192e22 Fix for Erratum 350 for AMD Fam10h CPUs.
Compared to posted patch, there are whitespace fixes
(request by Uwe), and a guard to run the erratum only
on AMD_RB_C2 (request by Marc).

Signed-off-by: Marco Schmidt <mashpb@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 11:33:58 +00:00
Marco Schmidt c263b4471d Fix for Erratum 343 for AMD Fam10h CPUs.
Signed-off-by: Marco Schmidt <mashpb@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4345 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 11:21:52 +00:00
Patrick Georgi 240ef7c769 Change the CBFS build process to use coreboot.rom
instead of coreboot.strip. That fixes the normal
image because the calculations for its offset in
the ROM match reality again.

This requires changes in CBFS configurations to
minimize the bootblock size. These are also done
for CBFS boards.

Other than this a couple of minor fixes are in this
patch:
- make asus/m2v-mx_se build with abuild with a
  crosscompiler
- move CONFIG_CBFS for hp/dl145_g3 to Options.lb
  as it's done everywhere else
- change the default config of abuild to not
  provide ROM_IMAGE_SIZE values for the images
  in a CBFS configuration
- change abuild's crosscompile autodetection to
  not try to use "i386-elf-i386-elf-gcc" (which
  is bogus)

Except for the latter two abuild changes (both
in util/abuild/abuild), they're available as
patch set on the mailing list in a mail from
2009-06-05 titled
[PATCH]es to get normal image to work again with CBFS

The changes in util/abuild/abuild are trivial and
abuild tested.

As discussed on the list,
targets/hp/dl145_g3/Config-abuild.lb is
deleted, now that Config.lb works again.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 07:19:53 +00:00
Carl-Daniel Hailfinger aa58f5427f Fix non-revF K8 ram init compilation which was broken in r4341.
Change all printk_raminit to printk_spew.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4343 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-05 23:43:11 +00:00
Uwe Hermann 20a98c9201 Initial untested board code for the VIA EPIA-M700 Mini-ITX board.
The patch has been submitted by bari <bari@onelabs.com> and written
by OLPC.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-05 23:02:43 +00:00
Carl-Daniel Hailfinger 3c45a96138 K8 RAM init debug messages are pretty short and sometimes cryptic. Make
them a bit more verbose and hopefully more understandable.

Old messages for my machine with 5 GB:
RAM: 0x00400000 kB
Ram3
[...]
Initializing memory:  done
RAM: 0x00500000 kB

New messages:
RAM end at 0x00400000 kB
Adjusting lower RAM end
Lower RAM end at 0x003f0000 kB
Ram3
[...]
Initializing memory:  done
Handling memory hole at 0x00300000 (default)
RAM end at 0x00500000 kB
Handling memory mapped above 4 GB
Upper RAM end at 0x00500000 kB
Correcting memory amount mapped below 4 GB
Adjusting lower RAM end
Lower RAM end at 0x00300000 kB

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-05 20:37:35 +00:00
Carl-Daniel Hailfinger 87e7050bff die() does never return. Annotate it as such.
Any endless loop after die() can be eliminated.
Dereferencing a NULL pointer is bad. die() instead.
Replace endless loops with die().

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4340 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-05 11:41:51 +00:00
Zheng Bao 28d71b9445 After I modify the pci_ext_read_config32 and pci_ext_read_config32, the step 6a
starts to play its role. Then the system hangs at HDA init. I dont know what the
VC1 is. The RPR says "Optional Features (only needed if CMOS option is enabled)"
in 5.10.2. Before I know what it is, I think it is better to skip it.

Tested on dbm690t.

Add comment from Rudolf,
"
VC is virtual channel. Its used for isochronous transfer of data to sound card.
The virtual channel guarantee "on time" delivery. In other words it sets up a
channel for data to sound card, which means that that arrivs in time and there will
be no interuptions in audio stream.

http://www.microsoft.com/whdc/connect/pci/wlp_interrupt.mspx
"

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4339 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-05 10:00:07 +00:00
Elia Yehuda a24e1dd6da Add a hopefully more correct and flexible set_dram_buffer_strength()
function based on test results with many different DIMMs.

Tested by Uwe Hermann <uwe@hermann-uwe.de> on hardware.

Might need a small increase of ROM_IMAGE_SIZE for some boards, we'll see.

Signed-off-by: Elia Yehuda <z4ziggy@gmail.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4338 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-05 00:22:25 +00:00
Myles Watson 1725703a1d The point of the patch is to make it easier to understand the raminit
code, specifically the difference between pre_f and f code.

The only functional changes are in printk statements.  The rest is white space.

1. Remove some #if 0 and #if 1 blocks
2. Remove #if USE_DCACHE_RAM blocks.  All K8 boards use CAR.
2. Correct typos (canidate -> candidate)
3. Try to minimize the differences between amdk8_f.h and amdk8_pre_f.h
4. Try to minimize the differences between raminit.c and raminit_f.c
5. Make boards that have rev_f processors include the correct raminit code

There is much more that could be done, but it's a start.

Abuild tested and boot tested on s2892 and serengeti_cheetah.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4337 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-04 20:18:42 +00:00
Zheng Bao d11bd003c6 This patch is about some noticable bugs which was made by no reason.
1. In rs690_cmn.c, mask the lower 4 bits of the BAR3. No doubt, right?
2. In rs690_pcie.c,
  (1) Obviously, the mask should be 0xF, and bit 19 should be set to 1 (in comment).
      In rpr 5.10.2, step 2, step 2.1 & step 2.6
  (2) The dynamic buffer allocation is enabled by setting bit 11 of PCIEIND: 0x20,
      instead of PCIEIND_P: 0x20.
      In rpr 5.10.2, step 5. Dynamic Slave CPL Buffer Allocation

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4336 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-04 01:57:03 +00:00
Luc Verhaegen a9c5ea08d0 Revert "CMOS: Add set_option and rework get_option."
This reverts commit eb7bb49eb5b48c39baf7a256b7c74e23e3da5660.

Stepan pointed out that "s" means string, which makes the following statement
in this commit message invalid: "Since we either have reserved space (which
we shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go."

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4335 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03 14:19:33 +00:00
Luc Verhaegen 9efecc5408 Revert "kontron 986lcd_m: cmos.layout: mark boot_devices as reserved."
This reverts commit c03527377db5951f0d3228e2a93b4c57dd81b8ec.

Stepan pointed out that 's' means string, and that therefor strings do exist.
Marking this as reserved breaks some payloads.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4334 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03 14:19:20 +00:00
Luc Verhaegen b005f0e2e0 kontron 986lcd_m: cmos.layout: mark boot_devices as reserved.
The kontron 986lcd_m cmos.layout had a 512bit area claimed for "boot_devices".
The changes to the cmos code no longer allow usage of values larger than
32bits. Since this option was completely unused, mark it as reserved.

Fixes build after the get_option change (r4332)..

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4333 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03 11:53:54 +00:00
Luc Verhaegen 9ceae905f1 CMOS: Add set_option and rework get_option.
To ease some of my debugging pain on the unichrome, i decided i needed to
move FB size selection into cmos, so i could test a size and then reset it
to the default after loading this value so that the next reboot uses the
(working) default again. This meant implementing set_option in parallel to
get_option.

get_option was then found to have inversed argument ordering (like outb) and
passing char * and then depending on the cmos layout length, which made me
feel quite uncomfortable. Since we either have reserved space (which we
shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go. So all users of
get_option now have their arguments inversed and switched from using ints
to unsigned ints now.

The way get_cmos_value was implemented forced us to not overlap byte and to
have multibyte values be byte aligned. This logic is now adapted to do a
full uint32_t read (when needed) at any offset and any length up to 32, and
the shifting all happens inside an uint32_t as well. set_cmos_value was
implemented similarly. Both routines have been extensively tested in a
quick separate little program as it is not easy to get this stuff right.

build_opt_tbl.c was altered to function correctly within these new
parameters. The enum value retrieval has been changed strol(..., NULL, 10)
to stroul(..., NULL, 0), so that we not only are able to use unsigned ints
now but so that we also interprete hex values correctly. The 32bit limit
gets imposed on all entries not marked reserved, an unused "user_data" field
that appeared in a lot of cmos.layouts has been changed to reserved as well.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4332 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03 10:47:19 +00:00
Zheng Bao a922b3195b Modify it based on the RPR 5.7.7. Switching GGSP Configuration By Register Programming.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4331 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03 03:15:05 +00:00
Uwe Hermann f8318fe8f9 More compact format for wiki output at
http://www.coreboot.org/Coreboot_Options (trivial).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4330 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-02 23:49:00 +00:00
Patrick Georgi c7a6447c8f cbfstool reacts to a too large bootblock file by stopping
with an error code now.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4329 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-01 20:02:21 +00:00
Uwe Hermann fff87d31ca Cosmetics and consistency fixes in src/superio/serverengines/pilot/ (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4328 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-01 01:38:29 +00:00
Rudolf Marek a519fe77b6 Following patch moves all vt8237 fadt.c from mainboard/* file to chipset
directory just with one common file.

Changes to FADT: move to rev4, fix the generic register descriptors, detect additional VT8237S features.
Change the compiler to CORE , its revision to 42. 

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4327 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-31 17:00:25 +00:00
Stefan Reinauer 608762793a Many Kudos go to Segher Boessenkool and Patrick Georgi for figuring this one
out. Fix the libgcc dependency on abort() due to nested functions.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4326 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-30 15:12:33 +00:00
Joseph Smith 41216225a1 rename the option CONFIG_PCI_OPTION_ROM_RUN_VM86 to CONFIG_PCI_OPTION_ROM_RUN_REALMODE.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4325 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29 18:41:09 +00:00
Joseph Smith 60f0f1b18f enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx southbridge.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29 13:45:22 +00:00
Stefan Reinauer f8a5c6ec02 drop most of the crappy vm86 code and replace it with a rewritten
version that has all assembler in a .S file and all C code in a .c
file. Also, remove requirement to move around between GDTs.

This version includes the suggestions from Peter to clean up CR0 manipulation
and to guard critical code paths by cli/sti. Tested and working on my hardware.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4323 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29 13:08:27 +00:00
Luc Verhaegen 43bc5a9c74 Fix build with CONFIG_*_ROM_RUN.
Last commit broke it due to leftover "void" from prototype.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4322 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29 03:44:47 +00:00
Luc Verhaegen 5c5beb765d Implement native VGA Support.
This code brings a rather complete set of VGA IO routines for whoever wants it.
These consist of the by now familiar read/write/mask sets. Due to the crazy
nature of VGA, an ancient standard with bits all over the place, it makes no
sense to define individual registers. You need a vga register spec at hand if
you want to do anything anyway. These IO routines are always exposed.

It also provides code to natively set up a 640x400 VGA textmode with an 8x16
font. The native VGA mode code is behind the OPTION_VGA option, as the font
really adds to the size of the compiled/compressed rom. The font is the one
also present in the linux kernel, but this file is unlicensed. Another copy of
this is also present in coreboot in the deprecated console/btext code.

The vga console code has been cleaned up, but it still has some TODO's left
open, but that's for when i finally have found the remaining issue with the
epia-m. Right now, it is important to get parts of my work out already and to
make the remainder managable again.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4321 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29 03:04:16 +00:00
Patrick Georgi 195f5cd666 Add lzma.o for CBFS, regardless if CONFIG_COMPRESSED_PAYLOAD_LZMA is
enabled or not.
CONFIG_COMPRESSED_PAYLOAD_LZMA is set only if the lzma utility is found
on the system - at least when using abuild. CBFS doesn't use this tool
for compression.

The result was a failed build if lzma (the tool) wasn't found, or
failed runtime (if src/lib/cbfs.c disables lzma decompression based on
CONFIG_COMPRESSED_PAYLOAD_LZMA)


Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4320 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-28 22:18:25 +00:00
Myles Watson f9f4eaf7ab Make memmove copy (dev->resources -i) resource structs instead of
(dev->resources-i) bytes in compact_resources.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4319 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-28 21:57:11 +00:00
Uwe Hermann 7365004424 First batch of indent-aided code cleanups, more will follow.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4318 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-27 18:55:19 +00:00
Uwe Hermann 5c044c732f Make directory hierarchy flat to match the same layout we use
for other chipsets, as suggested on IRC.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4317 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-27 17:06:54 +00:00
Patrick Georgi f2a4e63f92 Trivial, but brown paper bag worthy:
#ifdef CONFIG_foo
is a bad idea with our build system


Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4316 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-27 14:57:53 +00:00
Patrick Georgi a034dca42c Move coreboot_ram and coreboot_apc to CBFS. This allows to
reduce the size of the bootblock (done for kontron/986lcd-m)

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4315 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-27 14:19:31 +00:00