Commit Graph

24296 Commits

Author SHA1 Message Date
Paul Menzel d538dd1fe7 lib/lzmadecode: Add block around `UpdateBit1()`
Fix the error below.

```
src/lib/lzmadecode.c: In function 'LzmaDecode':
src/lib/lzmadecode.c:77:2: error: macro expands to multiple statements \
[-Werror=multistatement-macros]
  Range -= bound;    \
  ^~~~~
src/lib/lzmadecode.c:300:7: note: in expansion of macro 'UpdateBit1'
       UpdateBit1(prob);
       ^~~~~~~~~~
src/lib/lzmadecode.c:299:8: note: some parts of macro expansion are not \
guarded by this 'else' clause
      } else
        ^~~~
cc1: all warnings being treated as errors
```

The macro is defined as below.

    #define UpdateBit1(p)                           \
            Range -= bound;                         \
            Code -= bound;                          \
            *(p) -= (*(p)) >> kNumMoveBits

Found-by: gcc-8 (Debian 8-20180402-1) 8.0.1 20180402 (experimental) [trunk revision 259004]
Fixes: 35af5c47 (src/lib: Fix spacing)
Change-Id: Ife0688541e23c05e26e429a6d8caee7e2d425b1b
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-04-09 09:44:15 +00:00
Marc Jones d6a82007bd amd/stoneyridge: Add GNB IOAPIC init
Use standard coreboot function to set virtual wire mode on
the GNB IOAPIC.

BUG=b:74104946
TEST=Check GNB IOAPIC debug output on serial.

Change-Id: I4ff8698419890df1459b1107f0861cf8277a99b0
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-04-09 09:41:47 +00:00
Alexander Couzens f126b4b8f8 crossgcc/Makefile: don't allow to call buildgcc in parallel
Change-Id: If296414f8cb3bc87862cdc20f3d3acc1a3f78556
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/21229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-04-09 09:40:34 +00:00
Arthur Heymans 97b337b252 device/dram/ddr2.c: Add methods to compute to identify dram
DDR2 DIMMs are uniquely defined by SPD byte 64 till 72 and 93 till
98. Compute a crc16 over that data to provide a solid way to check
DIMM identify.

Reuse the crc16 function from ddr3.c to do this.

Change-Id: I3c0c42786197f9b4eb3e42261c10ff5e4266120f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-09 09:31:11 +00:00
Marc Jones f7dc972fde ioapic: extend definition name to avoid collision
Change EN/DISABLED to INT_EN/DISABLED to avoid collision with other
EN/DISABLE definition.

Change-Id: I85b1c544d0f31340a09e18f4b36c1942ea0fa6ef
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25540
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09 09:29:51 +00:00
Naresh G Solanki 4764be33e0 soc/intel/{apl,glk}: Move flush_l1d_to_l2 function to common location
Move flush_l1d_l2 function to common location within the SoC.

BUG=None:
BRANCH=None
TEST= Build for glkrvp.

Change-Id: I4aaaaccc4f343bc4926111258a33e09e79c76141
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/25547
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09 09:28:41 +00:00
Furquan Shaikh 7632ce0392 vboot: Add support for reading GBB flags
This change adds basic support for reading flags from GBB header
located in "GBB" section on SPI flash.

Change-Id: I35ecb5ba964511379baa4e9f458ba2e8c6b74b4e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-09 09:27:50 +00:00
Naresh G Solanki a6464b7ffd util/lint: Generate json output from checkpatch output
checkpatch_json.py processes the output of checkpatch.pl &
generates json format output of comments.

This json format output can be used to post comment on particular
CL using gerrit.

BUG=None
BRANCH=None
TEST= Run following commands:
1. Capture output of checkpatch.pl to file say checkpatch.txt
nice -n 20 git diff HEAD~ | util/lint/checkpatch.pl --no-signoff -q - |
tee checkpatch.txt
2. Generate json format file for the output.
util/lint/checkpatch_json.py checkpatch.txt comment.json
3. Post the comment.json using gerrit
ssh  coreboot.org gerrit review  -j  "<CL number>,<patchset number>"  < comment.json

Change-Id: I2471792796ab8e7d9855a6559fc731345ebd1525
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/23429
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09 08:18:43 +00:00
David Hendricks 6053a9ce05 console: Expose vsnprintf
It's a standard function.

Change-Id: I039cce2dfc4e168804eb7d12b76a29af712ac7a1
Signed-off-by: David Hendricks <dhendricks@fb.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/23616
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09 08:18:16 +00:00
Patrick Rudolph b90c0d90cf docker/coreboot-sdk: Add device-tree-compiler
Add dtc to Dockerimage for Jenkins.

Change-Id: Ifa3608f0a83431e75fbd402385863cce06e249fb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25525
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06 10:29:01 +00:00
Nico Rikken ecea3d450c mb/lenovo/w520: Add ThinkPad W520 support
Tested and working:
* 4 RAM-slots
* Speakers
* PCIe Wifi
* Camera
* Fan
* Touchpad, trackpoint and keyboard
* Ethernet
* Keyboard ACPI events
* USB 3.0
* SD-card reader
* Native graphics (LCD panel)
* Harddisk in Ultrabay
* SeaBIOS payloads
** Debian Live
** Debian testing 4.14.0-3-amd64
* GRUB
** Debian Live
** Debian testing 4.14.0-3-amd64

Not working:
* Displayport and VGA output (requires VGA option ROM and ACPI switch call)

Not tested:
* Intel VGA option ROM
* ACPI events related to ultrabay
* Smart card reader
* Docking station

Change-Id: I1deb0436a807950c605dcd590deedcb3169bf8c5
Signed-off-by: Nico Rikken <nico@nicorikken.eu>
Reviewed-on: https://review.coreboot.org/23564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-06 07:08:27 +00:00
Tristan Corrick 3f7de0686d mainboard: Add ASUS Maximus IV GENE-Z
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.3 with
kernel 4.9. This code is based on the output of autoport.

Working:
 - S3 suspend/resume
 - USB
 - Gigabit Ethernet
 - integrated graphics
 - PCIe
 - SATA
 - eSATA
 - PS/2 port (only a mouse has been tested)
 - hardware monitor
 - onboard audio
 - front panel audio
 - native raminit (2 x 4GB + 2 x 8GB, DDR3-1333)
 - native graphics init with libgfxinit
 - EHCI debug. The debug port is the port closest to the HDMI port.
 - flashrom, using the internal programmer. Tested with coreboot,
   untested with the vendor firmware.
 - NVRAM settings. Only `gfx_uma_size` and `debug_level` have been
   tested with values different from the default.

Untested:
 - VGA BIOS for graphics init
 - PCIe graphics
 - S/PDIF audio

Not working:
 - "clear CMOS" button

The CPUTIN sensor on the Super I/O is not connected. The PECI agent is
likely connected instead to give CPU temperature readings. However,
there does not appear to be enough information in the publicly available
datasheets to fully set up the PECI agent. As a result, there is
currently no accurate, automatic fan control via the Super I/O.

Change-Id: I1fc7940bb139623a5a0fde984c023deca9b551f2
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/24971
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06 07:06:21 +00:00
Ng Kin Wai f9b8ce810f fsp/fsp2_0/coffeelake: Add Coffeelake FSP UPD Headers
Header files based on FSP 7.0.25.34

BUG=none
BRANCH=none
TEST=built coreboot without build error.

Change-Id: Id92d99915bda89dd475f393a48adee60bbaee80f
Signed-off-by: Ng Kin Wai <kin.wai.ng@intel.com>
Reviewed-on: https://review.coreboot.org/25335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-04-06 07:05:12 +00:00
Naresh G Solanki 7b1b246411 mb/intel/glkrvp: Unselect Chrome EC specific config when using Intel EC
When building with Intel EC selected, unselect Chrome EC specific
options i.e., LID switch to prevent build error.

BUG=None
BRANCH=None
TEST=Build with Intel EC selected, Build should be successful.

Change-Id: I39d6d65bbfd08d684af43972b89ca78fcbd58567
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/25479
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06 07:04:36 +00:00
Werner Zeh cacc5a3eb0 fsp_broadwell_de: Provide valid address and size for DCACHE range
On Broadwell-DE the FSP sets up DCACHE in the early call. The address
does not match the default FSP 1.0 address defined in
src/drivers/intel/fsp1_0/Kconfig which leads to errors when this range
is used in pre-ramstage stages.

This patch provides the matching DCACHE_RAM_BASE value among with a
suitable DCACHE_RAM_SIZE for the FSP based Broadwell-DE implementation.
The include order of Kconfig files makes sure that the Kconfig file in
the soc directory is sourced first and the defined values will override
the ones in src/drivers/intel/fsp1_0/Kconfig.

Change-Id: I2a55b576541a3d974ee2714b198095aa24fc46f5
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/25535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-06 07:02:54 +00:00
Werner Zeh 3caf34167c fsp_broadwell_de: Provide valid ACPI path names for domain and LPC
Provide ACPI path names for PCI domain and LPC device so that generated
ACPI tables have valid device paths.

Change-Id: I5a97e45ef50ec5ee9d64c5d2834968a02455cf72
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/25534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06 07:02:40 +00:00
Justin TerAvest 438ca72460 mb/google/octopus: Edge trigger cr50 interrupt
Interrupts from cr50 are edge-triggered, not level-triggered. This
change updates the GPIO configuration accordingly.

BUG=b:75306520
BRANCH=None
TEST=None

Change-Id: I0c5fb4495b404412a78965c2de7f00248d0c684b
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/25538
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06 06:55:51 +00:00
Nicola Corna d58dd5c988 sb/intel/common/firmware: Allow CONFIG_USE_ME_CLEANER on Kaby Lake
Some users have reported a successful boot with me_cleaner on Kaby Lake
with OEM firmware:

https://github.com/corna/me_cleaner/issues/3

It should work as well on coreboot.

Change-Id: Ifc47f19deee5c39ca27b427c9406da7f6e3e9f15
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/25507
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06 06:54:46 +00:00
Nicola Corna 8882ac55ef util/me_cleaner: Update to v1.2
Changelog:
 * Add support for the HAP/AltMeDisable bit
 * Add support for selective partition removal
 * Fix the ME permission removal on gen. 3
 * Add public key match
 * Print the compressed size of the Huffman modules on gen. 2
 * Wipe the ME6 Ignition firmware images
 * Fix the removal of the last partition on ME6
 * Various region size fixes
 * Add manpage
 * Add setup.py
 * Print the value of the HAP/AltMeDisable bit

The output image should be identical, except for the platforms affected
by bugs (ME 6.x, but it's not supported by coreboot and ME 11.x with the
-d option, but it's not being used in our build process).
Overall, nothing should change when it's used with the
CONFIG_USE_ME_CLEANER option.

Tested on a Lenovo X220 and Sapphire Pure Platinum H61.

Change-Id: I3d5e0d9af0a36cc7476a964cf753914c2f3df9d2
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/25506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-04-06 06:54:14 +00:00
Sumeet Pawnikar 7efdacd748 mb/google/octopus/variants/baseboard: Enable DPTF support
This patch enables DPTF support for Octopus baseboard.

BUG=None
BRANCH=None
TEST=None

Change-Id: I88a94c73ef0c9da708c0440f7edadd85488edfdb
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/25342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-06 06:49:20 +00:00
David Hendricks 2004b93aed soc/cavium: import raw BDK sources
This imports common BDK sources that will be used in subsequent
patches.
The BDK is licensed under BSD and will be reduced in size and optimized to
compile under coreboot.

Change-Id: Icb32ee670d9fa9e5c10f9abb298cebf616fa67ad
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/25524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-04-06 06:48:11 +00:00
Nico Huber 71cbd71eb5 drivers/intel/gma: Depend less on default fb values
Instead of hard-coding a lot of default values of the framebuffer config,
we use the values provided by Display_Probing.Scan_Ports() and only
overwrite what is necessary. This way we are more independent from
changes inside libgfxinit.

Change-Id: I121bbd926532c27321446282aa334cc45cdbeef1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/25452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-06 06:46:27 +00:00
Nico Huber 06c8c0d1fe drivers/intel/gma: Amend stride calculation of linear fb
Aligning the stride up to a multiple of 64 pixels was flawed: We want
to actually align up to one cacheline (64 bytes) as that's the mini-
mum what the hardware supports.

Change-Id: I3f824ffd7d12835935e4e4bde29fe82dc3e16f9d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/25451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-06 06:45:38 +00:00
Marshall Dawson 1dd7a11ec4 amd/common/block/pi: Make agesa_heap_base() static
Convert agesa_heap_base() to static since it's unused outside of
heapmanager.c.

Change-Id: I3ee162985ca1ea36461ea413416d98451a700f8c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/25457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-04-06 06:44:18 +00:00
Marshall Dawson 679f923cfc vc/amd/stoneyridge: Add definition for AGESA heap rebase
AgesaHeapRebase is an optional callout that allows AGESA to use a
coreboot-managed heap base address.  Its internal default location
is determined by AMD_HEAP_START_ADDRESS which is defined as 4 MB.

Add a #define that AGESA may use once the feature is available.

BUG=b:74518368

Change-Id: Id23455779b1c8c4931ad1a3122587e09ad237ecc
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/25456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-04-06 06:43:50 +00:00
Marshall Dawson d85c4afea5 amd/stoneyridge: Use defined value for SPI flash MTRR
Replace an absolute value with a #define value in bootblock.  This is
in preparation for using an additional MTRR in a subsequent patch.

Change-Id: I006c7cfa0057b3ed4a21359fc8367caf6ec5baf3
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/25455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-04-06 06:43:43 +00:00
Youness Alaoui 3f42a26b42 purism/librem_skl: Add AC/DC LoadLine to VR Config
The FSP 2.0 needs to set the ac_loadline and dc_loadline for
each VR config. Without it, the Loadline is considered to be
0 mOhm and this causes CPU temp to jump all over the place
whenever the CPU is used.

This is necessary since there are no VR_CONFIG icc mappings for
Skylake SKUs, only KabyLake.

These values were copied from the Google Poppy devicetree.

Change-Id: I6aeb6ee521988b94f2ae94a60d1a28b87ba984d4
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/25324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06 06:43:00 +00:00
Youness Alaoui cb8f04dc83 purism/librem_skl: Set TCC Activation at 95C
Set the Thermal Control Circuit (TCC) activaction value to 95C
even though FSP integration guide says to set it to 100C for SKL-U
(offset at 0), because when the TCC activates at 100C, the CPU
will have already shut itself down from overheating protection.

This was tested on Purism Librem 13 v2. A bisect showed that the
immediate shutdowns happened after commit [1] was merged which led
to this solution.

[1] ec5a947b (soc/intel/skylake: make tcc_offset take effect)

Change-Id: Idfc001c8e46ed3b07b24150c961c4b9bc9b71a62
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/25323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06 06:42:15 +00:00
Youness Alaoui 0601f1e164 purism/librem_skl: Enable VMX and Intel SpeedStep in devicetree
Although VmxEnable is currently ignored by FSP, a forthcoming patch
explicitly enables it in coreboot, so set it in anticipation of that.

Enable Intel SpeedStep to ensure the ACPI tables are generated for
the C-states/P-states which are required for the xen-acpi-processor
module to be loaded. Without it, the Qubes 4.0-rc4 installer will
complain at boot about modules that could not be loaded.

Change-Id: I968ef36ec9382a10db13d96fd3a5c0fc904db387
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/23684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06 06:41:38 +00:00
Youness Alaoui 59d89a8e59 purism/librem_skl: Enable TPM support
Change the GPIO to match the TPM-enabled motherboards, and add TPM
support in devicetree and enable the config.
After changing the GPIO table, the librem 13v2 and librem 15v3 now
have the same GPIOs, so use a single gpio.h file instead of one
file per variant.

Change-Id: I425654c1c972118aa81c27961246238c2eef782d
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/23683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06 06:41:20 +00:00
Lijian Zhao 91c8e23e01 soc/intel/cannonlake: Add VT-d and VMX programming
Add FSP option to enable/disable VT-d (Intel Virtualization Technology
for Directed I/O) and VMX (Virtual Machine Extensions), VMX will be
disabled once VT-d got disabled.

Bug=b:73655383
TEST=Build and flash image on meowth board with debug build FSP, in
serial log search for "VMXEnable" and "VtdDiable".

Change-Id: I589590450aa4b9302ee2f9bb7b879a332f50b73e
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/25118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-05 16:00:27 +00:00
Lijian Zhao 32c3069fd7 intel/fsp: Update cannonlake fsp header
Fsp revison 7.x.2A.20 also updated MemInfoHob.h to fix SMBIOS Type 17
Offset 15h Speed report incorrectly issue.

BUG=None
TEST=Boot up with meowth platform and run dmidecode to see two dimm
entries under Type 17.

Change-Id: Ie1c4df162e75535ad458709452a76de01e31907e
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/25378
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05 15:59:57 +00:00
Bora Guvendik 2a50a1f534 soc/intel/cannonlake: Clear EMMC timeout when boot source is not EMMC
Clear EMMC timeout register to avoid EMMC issue according to cannonlake
bios writer guide. _PS0 is not called by kernel when boot source is not
EMMC but kernel still initializes emmc. Add _INI to EMMC,SD asl code to
cover cases that the system doesn't boot from EMMC.

BUG=b:76202699
TEST=Install OS into EMMC

Change-Id: I4eef23f637f781b709696951c5bd825530cc1d11
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/25290
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05 15:59:28 +00:00
Nico Huber 8e50b6d63d sb/intel/bd82x6x: Let mainboard override SPI opmenu
For some SPI chips (e.g. those with AAI writes), the default OPMENU
definitions don't work well. Thus, provide an option to override the
defaults in the devicetree.

Writing the OPMENU now happens in ramstage instead of the SMM finalize
handler. If you let coreboot call the finalize handler, nothing should
change. If you call the handler from your payload, OTOH, the OPMENU
might have been changed in between, so be careful what you lock.

Change-Id: I9ceaf5b2d11365e21a2bebc9c5def1fcf0be8aad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/23587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicola Corna <nicola@corna.info>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-04-05 15:58:37 +00:00
chriszhou 385e8fc5a9 mb/google/poppy/variants/nami: Add SPD file for Vayne
Add SPD file for sdp hynix_dimm_H5AN8G6NAFR-UHC (ram id: 6).

BUG=b:77290144
TEST=Verified that the device with this memory part boots to OS fine.

Change-Id: I33503de21c9fc14537c00c092986fd4d2998dace
Signed-off-by: chriszhou <chris_zhou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Shelley Chen <shchen@google.com>
2018-04-05 15:57:39 +00:00
Richard Spiegel 8e1f563cd6 mb/amd/gardenia/gpio.c: Convert GPIO to new format
New macros were developed that replace previous way of defining GPIO, with
pin and intention very clear while keeping the table mostly identical to
previous method (there's no pull up or pull down when a GPIO is set as an
output). Change current gardenia table to use the new macros.

BUG=b:72875858
TEST=Build Gardenia.

Change-Id: I402b95374cc5ba01bb961ebcb34d8e465b443c08
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-05 15:57:03 +00:00
T Michael Turney a12c6019b5 soc/qualcomm/sdm845: Add MMU support
Initialize 1st 4GB as Device Memory, except:
 * 1st page: NULL address
 * System_IMEM: Cached SRAM
 * Boot_IMEM: Cached SRAM

TEST=build

Change-Id: Ic6cf022b08bb2568fdf956cea8bad46da89236c5
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25201
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05 15:56:13 +00:00
T Michael Turney ace0c06de1 soc/qualcomm/sdm845: remove hole in memlayout.ld
Removed 33KB hole in SSRAM

TEST=build & run

Change-Id: I6851860f878d9a0688975fa855980870d657ee1a
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25391
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05 15:55:12 +00:00
Nico Huber c37b0e3d07 soc/intel/skylake: Generate ACPI DMAR table
If the SoC is VT-d capable, write an ACPI DMAR table. The entry for the
GFXVTBAR is only generated if the IGD is enabled.

Change-Id: I8176401dd19aee7ad09a8a145b7a3801fe5b2ae1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-04-05 15:53:20 +00:00
Nico Huber 2afe4dc075 soc/intel/skylake: Enable VT-d and X2APIC
We use the usual static addresses 0xfed90000/0xfed91000 for the GFX
IOMMU and the general IOMMU respectively. These addresses have to be
configured in MCHBAR registers (maybe, who knows, the blob is undocu-
mented), advertised to FSP and reserved from the OS.

The new devicetree option `ignore_vtd` allows to retain the old beha-
viour (do whatever pre-set UPD values suggest).

We also let FSP set up distinct BDFs for messages originating from the
I/O-APIC and the HPET.

Change-Id: I77f87c385736615c127143760bbd144f97986b37
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-04-05 15:52:45 +00:00
Patrick Rudolph db06cf0576 src/drivers/pl011: Add verstage support
Build pl011 to support building vboot on arm platforms.

Change-Id: I1ddc372d558b380065ff944fccb0d84eb37d4213
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-04-05 15:50:52 +00:00
Martin Roth 99519bc0aa mainboard/google/kahlee: Update WP to active low
The WP signal to the AP isn't inverted as it is on other platforms, so
it was reporting incorrectly.  Change the ACPI table to be active low,
and invert the signal when reporting it to everything else.

BUG=b:74946358
TEST=Boot grunt with battery inserted, WP signals both report 1.  Remove
battery, WP_CUR reports 0, WP_BOOT still reports 1.

Change-Id: Ic1369dbda609e34b308af308880449643be6af39
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/25469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-05 15:50:07 +00:00
Ivan J 85c76c9bc0 intelmetool: Include <sys/io.h> for musl-libc
This allows compiling the program using musl-libc, since otherwise
iopl(2) is undeclared.

Change-Id: Ia27203cf47b9be3f7bf1ad422c8f490caeae8f56
Signed-off-by: Ivan J. <parazyd@dyne.org>
Reviewed-on: https://review.coreboot.org/23834
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05 14:01:39 +00:00
Naresh G Solanki f92fcabba8 x86: Add function to modify CR3 register
Register CR3 holds the physical address of paging-structure hierarchy.
Add functions to enable read/write of this register.

Change-Id: Icfd8f8e32833d2c80cefc8f930d6eedbfeb5e3ee
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/25478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-05 10:17:29 +00:00
Sumeet Pawnikar 65d2d21a04 mb/google/octopus/variants/baseboard: Set PL1 and PL2 value
This patch sets PL1 value to ~6W. Here, 8W setting gives
a run-time 6W actual measured power.
Also, this patch sets PL2 value to 15W.

BUG=None
BRANCH=None
TEST=Build and read the MSR 0x610.

Change-Id: I2439a49b9917db0d9b05f333ce1c35003da493f6
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/25341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-04 16:19:56 +00:00
Jonathan Neuschäfer 2f828ebb59 nb/intel/gm45/raminit: Use CxDRT*_MCHBAR instead of magic numbers
This is hopefully more readable.

TEST=Build lenovo/x200 with and without this patch (using make
BUILD_TIMELESS=1), compare build/coreboot.rom, notice no differences.

Change-Id: I079d5353633a3d58ce0e5e616f3fad687a064d65
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23709
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-04 13:44:47 +00:00
Vaibhav Shankar 0b861daecc mainboard/google/zoombini: Enable HAVE_ACPI_RESUME
This patch selects `HAVE_APCI_RESUME` to enable S3 resume. This
has a dependency on EC to store the hash.

BUG=b:72472969
TEST=suspend and resume from S3 should work.

Change-Id: I9de84dfd450936b3bc08e016bec6cf5ae88eab3d
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/25390
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-03 23:07:01 +00:00
Patrick Rudolph 03c7b05a5a include/string: Add strrchr
Copy strrchr from libpayload.
To be used by Cavium's BDK or FDT parsers.

Change-Id: Iab7981c25113ed16f1b8130de4935d30c29d2fa5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-04-03 14:16:16 +00:00
Julius Werner 4783db2cf1 spi: Add helper functions for bit-banging
Sometimes when bringing up a new board it can take a while until you
have all the peripheral drivers ready. For those cases it is nice to be
able to bitbang certain protocols so that you can already get further in
the boot flow while those drivers are still being worked on. We already
have this support for I2C, but it would be nice to have something for
SPI as well, since without SPI you're not going to boot very far.

This patch adds a couple of helper functions that platforms can use to
implement bit-banging SPI with minimal effort. It also adds a proof of
concept implementation using the RK3399.

Change-Id: Ie3551f51cc9a9f8bf3a47fd5cea6d9c064da8a62
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-03 00:34:52 +00:00
Julius Werner ffeee42091 rockchip: Add gpio_set() function
The <gpio.h> API is supposed to include a gpio_set() function that just
toggles the state of a GPIO already configured as an output, even though
we rarely need it since gpio_output() can already be used to initialze a
GPIO to a default value while configuring it as an output. This function
was forgotten on Rockchip, so this patch adds it now.

Change-Id: I201288139a2870e71f55a7af0d79d4a460b30a0c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-03 00:34:46 +00:00