Values were taken from PDG (571391), 51.3 IMVP8 Voltage and Current
Requirements.
Change-Id: Iffa29386cb7da333353dafd0ba3a61ca61a0ccac
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add basic devapc (device access permission control) drivers.
DAPC driver is used to set up bus fabric security and data protection
among hardwares. DAPC driver groups the master hardwares into different
domains and gives secure and non-secure property. The slave hardware can
configure different access permissions for different domains via DAPC
driver.
1. Initialize devapc.
2. Set master domain and secure side band.
3. Set domain remap.
4. Set default permission.
Change-Id: I3677657a117caed0d73526f78b0ebe8180148335
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Now that gsi_fw blob has landed, need to uprev the qc_blobs.
Change-Id: I0bf67a560ee2e5d771bdb71b60e3d3d372dad567
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56776
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the PCIe RTD3 driver for WWAN device attached to PCIe Root
Port 6 and provide the reset GPIO / src clk pins.
BUG=None
BRANCH=None
TEST=Build and boot the coreboot image, check if device is enumerated
in the lspci list after warm/cold reboot cycles, run suspend cycles and
check if WWAN is entering L2 LPM.
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com>
Change-Id: Ie9d1ce55cc1297ea0e1069979bbecfaac8f8de05
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
- configure TROGDOR_HAS_MIPI_PANEL to "n" by default, it can be updated for mipi panels.
- add simple rm69299 panel as an example to append new mipi panels.
- use existing edid struct to update mipi panel parameters.
- add dsi command tx interface for mipi panel on commands.
Change-Id: Id698265a4e2399ad1c26e026e9a5f8ecd305467f
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52662
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, the `USE_LEGACY_8254_TIMER` Kconfig option is the only way
to enable or disable the legacy 8254 timer. Add the `legacy_8254_timer`
CMOS option to allow enabling and disabling the 8254 timer without
having to rebuild and reflash coreboot. If options are not enabled or
the option is missing in cmos.layout, the Kconfig setting is used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic82c7f25cdf6587de5c40f59441579cfc92ff2f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
This patch initiates the brask setting which includes
the gpio and device tree setting.
BUG=b:191472401
BRANCH=None
TEST=build pass
Change-Id: I1bb42c7bb2492402de0810bc4ab2e8d8c0e2392b
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This reverts commit f294378622.
Reason for revert: It makes cret can't boot to os without depthcharge change. The depthcharge change related with fw_config and will effect other variants.
BUG=b:194961854
TEST=Build and boot to OS.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I929369c9419375e74be61a4ff3e5566b0f41ce65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Crashlog is a debug feature and not used in normal mode of operation.
Disabling this feature will allow us to disable unused IPs and also
provide boot time savings of ~5-7 ms.
BUG=b:195327879
BRANCH=None
TEST=Platform boots and no function impact
Change-Id: I1f7def4ea41ff7a566aada080be1e791c11766e6
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56654
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the felwinter variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:194431541
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_FELWINTER
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: Iff2b9daec40995a013f9fe0dd76ad667d1807d1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56765
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
They are used at most once. Use the actual values and drop the macros.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: I9c1c3ebbbfa64a5eeea3bd5551c3d0068ac0dab2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55799
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Broadwell now uses the Lynx Point hda_verb.c and should thus use the
corresponding header as well.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: I9b8ca91bed67be9c6850bd51f4c81e002a0f5aef
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55797
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For some reason, this change makes ramstage slightly smaller.
Change-Id: I5564e06b797d787f0d1093bd9bd572d1ee7b2d54
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55583
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These functions are never defined. Remove the unused declarations.
Change-Id: I4204265680d06bf83fc42f061fd7270ff8e3305e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55798
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This file only contains the `broadwell_run_reference_code()` function
prototype (either a declaration or an inline stub definition). Rename
this file to refcode.h and only include it where necessary.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: I6513f45b8914a84312b27ef4860870a89fd0aab3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55582
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update tianocore branch used with default UEFIPAYLOAD option to
mrchromebox/uefipayload_202107 (July 2021) branch. This branch is
rebased on edk2 upstream commit 12e34cd2f7900578ee83cb01b8f1696a7bb7511b
[OvmfPkg/Bhyve: clean up TPM_ENABLE remnants] vs tag edk2-stable202105.
The main changes are fixes for e820 table parsing and support to disable
"Above 4G decode", which is required to boot distros with bootloaders
that expect to be loaded into RAM below 4G. This fixes booting with
Qubes, ZorinOS, Proxmox, among others.
Additionally, several commits on top of upstream have been consolidated,
reworked, and/or reordered for readability and maintainability.
Change-Id: I6f04fd027a0599ca6892a1376938108a2e402ac2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some legacy devices need to have the master bit set in the PCI config
due to old drivers not setting it correctly. Set the master bit if the
feature is enabled via Kconfig switch PCI_ALLOW_BUS_MASTER_ANY_DEVICE.
For now, the PCI devices with the ID 110a:403e and 110a:403f needs this
master bit to be set.
Change-Id: Id3f6bda97e5f47d0613a1db8f8adac0b158ab8b1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56632
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Boards based on mc_ehl have, just like some mc_apl variants, legacy
devices on the PCI bus which take longer to boot. In order to ensure
that they will be enumerated correctly wait for them to come up before
PCI scan starts.
TEST=Checked that the new message is visible in the log.
Change-Id: If2f935b69ddaa9364566deacfada5e7d41fcdabd
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56631
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GENMASK is defined in multiple files (with various names such as
MASKBIT), which sets certain consecutive bits to 1 and leaves the others
to 0. To avoid duplicate macros, add GENMASK macro to helpers.h.
GENMASK(high, low) sets bits from `high` to `low` (inclusive) to 1. For
example, GENMASK(39, 21) gives us the 64-bit vector 0x000000ffffe00000.
Remove duplicate macro definitions. Also utilize GENMASK for _BF_MASK in
mmio.h.
BUG=none
TEST=make tests/commonlib/bsd/helpers-test
TEST=emerge-cherry coreboot
BRANCH=none
Change-Id: If2e7c4827d8a7d27688534593b556a72f16f0c2b
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
1. Replace OV5675 ACPI entries with IMX208
2. Replace FW_CONFIG name
3. Add support for NVM inside UFC
BUG=b:190674542
TEST=Build and boot to OS on Brya, raw capture on UFC
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I6a3bf13ec844fb46e11ce58382057fcc7187c135
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
As per the schematics, UFC has on card oscillator so we donot need
H21 in NF1 that is IMGCLKOUT
H21 is used to enable this oscialltor so configuring it as 1
A17 is configured as high while _ON method is called by driver and
it is configured as low when _OFF method is called by driver.
Hence coreboot should configure it as low on boot.
BUG=b:190674542
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I745169a5ab6a9c20b6e1bda792a43193d04ac48d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56655
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The cappy2 removed the anpec apw8738bqbi and "disable_external_bypass_vr" should be set to "1" to disable
BUG=b:194146867
BRANCH=dedede
TEST=VCCIN_AUX is disable
Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com>
Change-Id: Ieb4182a989459db629e3b69757c293ca26e8b0cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Using Tpm2.0 device instead of the Cr50 in cappy2
BUG=b:191743435
BRANCH=dedede
TEST=tpm2.0 device function is ok
Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com>
Change-Id: I216ceb6386ad57c9f1982187a4525d89869fa9c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56658
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For consistency with Haswell, rename this macro to `HOST_BRIDGE`.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: I4319f04c67aec8df118fa539e00c7328128f0700
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55528
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Done for consistency with Haswell in order to ease unification.
Change-Id: I445f086cfcb65a6001ced3326fb9f25a4188b888
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55527
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Put the Haswell MRC glue code inside a `haswell_mrc` subfolder. Future
commits will move the Broadwell MRC/refcode glue code to be in Haswell
northbridge scope, so plan in advance.
Tested on Asrock B85M Pro4, still boots.
Change-Id: Id3e26ec1c2d5ccce928083d7ce41445908df8cf3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55523
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new IVRS kconfig option to control IVRS generation.
BUG=b:190515051
Change-Id: Iad0c6401dbccd2f3f75464a69e4c27f64d3507a5
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Chromebook have some platform need support MICMUTE and KBDILLUMTOGGLE.
BUG=b:194146863
BRANCH=none
TEST=check on evtest
type 4 (EV_MSC), code 4 (MSC_SCAN), value ab
type 1 (EV_KEY), code 228 (KEY_KBDILLUMTOGGLE), 1
type 4 (EV_MSC), code 4 (MSC_SCAN), value 9b
type 1 (EV_KEY), code 248 (KEY_MICMUTE), value 1
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: Ic39ecb3118e885c9e6d84d7b78bf435cb903d17e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
LTE module L850-GL may encounter U3 wakeup race condition with the host.
Setting xHCI LFPS periodic sampling off time to 0ms so that the host would not
miss the device-initiated U3 wakeup thus avoid the race condition.
BUG=b:187801363
BRANCH=dedede
TEST=flash the image to the device. Run following command to check the bits[7:4] is 0x0:
iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: stanley.wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I9328e758ed92389e44b25ff4daf6ec19b37ae7d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ben Kao <ben.kao@intel.corp-partner.google.com>
A valid GEVENT number is never negative. The local variable in
set_single_gpio still needs to be a signed integer, since the return
value of get_gpio_gevent being -1 indicates that the GPIO can't generate
a GEVENT. The check for that makes the function return before calling
program_smi of program_sci, so the parameter of those functions can be
changed to unsigned.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6ce23ceed1585589932824b8cab2a138328672a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56705
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Each bit in the GPIO wake status index registers is set to 1 when at
least one of 4 corresponding GPIO pins has its wake status register set.
Added the comment since the gpio_base + i * 4 in the next line looked as
if it calculates some absolute register value which is not what the code
does or should be doing.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2fc8e9c5bd7c1b011f364b05d0cfdeb0df88ada6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56703
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the parameter the variable gets compared with is size_t type, use
size_t as type for that variable too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If82a948bf71079d456616f4438f4b754e0d7262d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56702
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Aaron is no longer employed at Google and is not actively working on
coreboot anymore, therefore remove this account from MAINTAINERS.
Change-Id: Ife7c75ab8290873da1e02332609482c407373c45
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
With the addition of the remote GPIO support, the GPIO number won't fit
into 8 bit any more, so use the gpio_t type instead which is an uint32_t
typedef.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de93fd3a2f2af3c1e3b335fef84019c56482051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56693
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The offsets of all GPIOs in the up to four regular banks are all
calculated relatively to ACPIMMIO_GPIO0_BANK, so we can just drop the
unused defines for ACPIMMIO_GPIO1_BANK and ACPIMMIO_GPIO2_BANK.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I832ffdca479c1f07219a23b4a7f9be69322dfe03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56675
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO bank 3 isn't used in coreboot, but the existence is documented in
both the Picasso PPR #55570 Rev 3.16 and Cezanne PPR #56569 Rev 3.01 and
for those two SoCs all 4 banks are covered by the corresponding
Memory32Fixed region in the DSDT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id444a97a398d7e3abfd1f5c4a32e762ee6ff68f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56674
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
WWAN (fibocom L850-GL) works in USB mode, so turn off PCIe 6.
BUG=b:194861116
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: Ie04a5bb2af9ce11f57339f460a7f880bfc14b688
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Sync the MemInfoHob.h with current FSP code.
BUG=b:190339677
TEST=dmidecode -t 17 can show the memory information.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I80d1252b1f12b164d4f6d3a01221507cdfbe4d08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Realtek speaker amplifiers under auto mode operation have Absolute Max
Rating (AMR) at 1.98 V. Hence probe the firmware config for speaker
amplifier and program the VCCIOSEL accordingly.
BUG=b:194120188
TEST=Build and boot to OS in Storo. Ensure that the VCCIO selection is
configured as expected and probing the GPIO reads the configured
voltage.
Change-Id: Ibd3bc90bd0bbc9a35922b29e3d1e106321bc7a06
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56616
Reviewed-by: Evan Green <evgreen@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Latency Tolerance Reporting is yet another PCIe power management feature
which can have a bad influence on realtime performance. Disable this
feature for all PCIe root ports.
Change-Id: I38023e095ca55efd2178ad944f651fee1f1c34cd
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Nico Huber