Enable I2C0 in fleex then verify EMR function successfully
BUG=b:135968368
BRANCH=octopus
TEST=EMR function working normally with I2C0 in Grob360S.
Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The 'Jacuzzi' is a different base board that will share most of Kukui
design. For AP firmware, there will be only a few changes expected,
mostly in display (for MIPI bridge) and EC/keyboard so we want to create
it as variants inside Kukui folder, not forking a new directory.
BUG=b:137517228
TEST=make menuconfig; select 'krane' and build; select 'jacuzzi' and build.
Change-Id: Ic2b04e01628dc3db40f79f9bbdd5cc77d9466753
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34344
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We do not want to disguise somewhat complex function
calls as simple macros.
Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This is based on the grunt variant.
BUG=b:135551210
BRANCH=none
TEST=emerge-grunt coreboot chromeos-bootimage
Ensure that image-treeya.*.bin are created
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I40f3c9de87350777b02dd91d8c5b9dbe2eb9f6b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This change provides an implementation of variant_devtree_update() for
kindred that disable eMMC controller when SKU ID = 1 or 3
BUG=b:132918661
TEST=Verify eMMC is disabled when SKU ID = 1 or 3
Change-Id: I8ccb4dae54f223881e0ced9e034bf45b994cc6f2
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
We would like to wake eve up in suspend from an MKBP event. This commit
simply enables MKBP events to wake the system in suspend using the
existing host event interface. There is an accompanying series of
patches in the EC firmware for eve that will allow a MKBP wake mask to
be configured.
BUG=chromium:786721
BRANCH=firmware-eve-9584.B
TEST=Build and flash eve, generate MKBP events on the EC and verify
that the system wakes up in suspend.
Change-Id: I75b05c83a4204d55df11589299a7488d04bbd073
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34454
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Functional changes were already done in 5eb81bed2e (sb/intel/i82801gx:
Detect if the southbridge supports AHCI) but we forgot to update the
`chip.h` and devicetrees.
Change-Id: I0e25f54ead8f5bbc6041d31347038e800787b624
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34462
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The EC ID of the ECDT needs to be null-terminated (see ACPI specification,
section 5.2.15), which currently isn't being done due to an off-by-one
error. strncpy() is bug-prone exactly because of issues like this, so just
skip it entirely and use memcpy() instead.
Change-Id: I0b62e1f32177c9768fa978053ab26bca93d7248d
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402104
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Disable unused USB devices in the device tree so that the concerned ACPI
objects do not get exported to the OS.
BUG=b:133513961
BRANCH=octopus
TEST=Boot to ChromeOS. Ensure that the USB devices are disabled based
on port status and the concerned ACPI objects are not exported.
Change-Id: I0faccdfb8a9df9ec52130437433b15973e3d6f1a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add devicetree configuration for USB devices so that USB Port
Capabilities (_UPC) and Physical Location of Device (_PLD) ACPI objects
can be exported to the OS.
BUG=b:133513961
BRANCH=octopus
TEST=Boot to ChromeOS. Ensure that the _UPC & _PLD ACPI objects are
exported for the configured USB devices in the SSDT table.
Change-Id: I832ffe305d256296b7447035c5e5dcafb7c296d9
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We would like to wake nocturne up in suspend from an MKBP event. On
Nocturne, MKBP events are notified to the host via a GPIO from the EC,
EC_INT_L. However, the AP cannot wake from suspend from this GPIO.
Therefore, we'll use the host event interface to wake the system
instead.
This commit simply enables MKBP events to wake the system in suspend.
BUG=chromium:786721
BRANCH=firmware-nocturne-10984.B
TEST=Build and flash nocturne, generate MKBP events on the EC and verify
that the system wakes up in suspend.
Change-Id: I6aff4d38051c939257533229fd0085e42c01d02f
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
The processor P_BLK doesn't support throttling. This behaviour could be
emulated with SMM, but instead just update the FADT to indicate no support
for legacy I/O based throttling using P_CNT.
We have _PTC defined in SSDT, which should be used in favour of P_CNT by
ACPI aware OS, so this change has no effect on modern OS.
Drop all occurences of p_cnt_throttling_supported and update autoport
to not generate it any more.
Change-Id: Iaf82518d5114d6de7cef01dca2d3087eea8ff927
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch configures GPIO pin GPP_G7 as NF1 with internal pull down.
As per schematics SD host controller SD_WP pin is not connected to
uSD card connector. Configured gpio pin as NF1 with internal pull down
in order to overcome gpio default state in hatch which makes SoC
SD_WP pin is enable.
BUG=b:137729527
BRANCH=None
TEST=Able to write/read data to/from sd card after mounting card device.
Change-Id: I0187267670e1dea3e1d5e83d0b29967714d6065e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34396
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Following changes are done to enable ALC1011 codec on Helios
1. ACL1011 4 devices to I2C4
2. GPIO H13 is set to GPO as per schematics
Verified SSDT table and i2cdetect from kernel.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Change-Id: I0d71e3bd2d4493d059a33023c1afe1b630181d4f
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change provides an implementation of variant_memory_sku() for
helios that overrides memory ID 3 and 4 to 0 and 1 to workaround the
incorrect memory straps in hardware for board id 0 and unknown.
BUG=b:133455595
Change-Id: I38fab1f91decac5d0a146e5a6c74e88f677af305
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
This change adds support for variant_memory_sku() that allows variant
to return memory SKU ID. Current implementation of memory_sku() is
renamed to weak implementation of variant_memory_sku(). Functionally
this change should be the same as before for all hatch variants. This
function will be overriden by helios in a follow-up CL.
BUG=b:133455595
Change-Id: I509c263ec08e0060c12ef1ea9fed673f1e3f3a41
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Autoport generates these structures as static so let's make it consistent.
See also commit 128205fd with Change-Id
I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 ("autoport/bd82x6x.go: Improve
gpio.c generation").
Change-Id: I4e07bd755ca4a65b76c69625d235a879fe7b43cb
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33524
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct all GPIOs with reference to the Apollo Lake SoC EDS Vol 4
revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be
used in Function 0 (GPIO) mode.
In additional, set an internal pull to any GPI that does not have an
external resistor so that the input is not in an undefined state.
Change-Id: Ia8fe457eddbed0f4ee6bff9ef9dd7a92545be40b
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
The limitation for SD-Card was originally only made for mc_apl2
mainboard. Since other mc_apl mainboards also use the SD-Card interface,
the speed mode setting is made in the parent mainboard_final.
In additional, all UHS-I bus speed modes are disabled because of a
limitation for industry use cases. This means that only HS mode is
permitted.
Change-Id: I2f1b51f13a53c2507c52d6a169d6384b8570b3bc
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch makes VGPIO_3 GPIO PIN output and low independent of
cnvi is connected or not.
BUG=b:123062346
BRANCH=None
TEST=boot up Hatch device and make sure VGPIO_3 gpio pin is driven low.
Change-Id: I629b99676f56747de1b244724709e14069250097
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34376
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This CL allows that everyone can use main() in lib/bootblock.c
even if you select CONFIG_BOOTBLOCK_CUSTOM. I also rename main
functions used in some soc/ to avoid the collision with the
main function defined at lib/bootblock.c.
Change-Id: I0575c9d1ce9dea9facfcc86760dff4deee9c1e29
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34250
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Initial support for Portwell PQ7-M107 (Q7) module.
Code based on Intel Strago mainboard.
BUG=N/A
TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107
Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Currently, bluetooth FW is not loaded after a reboot. In order to do
this, we have to disable the bluetooth disable gpio (GPP_C14) in
bootblock and re-enable it in ramstage.
BUG=b:137307516
BRANCH=None
TEST=boot up Hatch device and make sure (in dmesg) that proper
bluetooth FW in loaded
Change-Id: Ic5e447d9de57790f7a100e9e03f36b047c19d8f9
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34354
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIOs related to power sequnce are
GPIO_67 - EN_PP3300
GPIO_117 - FULL_CARD_POWER_ON_OFF
GPIO_161 - PLT_RST_LTE_L
1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161
2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67
3. Power reset:
- keep GPIO_67 and GPIO_117 high and
- pull down GPIO_161 for 30ms then release it.
BUG=b:137033609
BRANCH=octopus
TEST=build image and verify on the DUT with LTE DB.
Change-Id: I7bf6fee087c885c22363b44aa98aa61f91be90b4
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
These configuration files can be used to build Kodama firmware.
BUG=b:135490566
TEST=check variant: kodama via make menuconfig; make -j
Change-Id: I72e80e800ba041df1dda2b0f84470d1ef58bc946
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33616
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Elan's touchpad requires min 0.3us data hold time.
To fine tune the data hold time of i2c1 to meet
specification of Elan's touchpad.
BUG=None
BRANCH=None
TEST=Verified data hold time of i2c1 is around 320ns
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I0fa9db3b50e74f193261be96bd9e305bb19841e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Crews <ncrews@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Hatch and variants use GPP_A21 for trackpad IRQ and wake. Fix
overridetree.cb to advertise the right IRQ.
Change-Id: Ib87c858b89e8726c3bc80f83be0729ef4625268e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34248
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Bluebird needs to use different SAR values than Casta.
Bluebird sku id is 2.
CQ-DEPEND=CL:*1435310
BUG=b:129725065
BRANCH=octopus
TEST=build
Change-Id: I107a8519832fcf906b94f958a3dc508d19bb4727
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34080
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove implementation of 24 MHz clock, available only
on Haswell ULT SKUs. Use TSC_MONOTONIC_TIMER instead
for all boards.
Change-Id: Ic4aeb084d1b0913368f5eaa46e1bd68411435517
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
By setting the GPIOs 42 and 43 to native function 1 the LPSS UART 1 is
activated.
Change-Id: I74abd1b6fb5459cf11a5bdee182c99462f613b7a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34238
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Update the AC/DC loadline values for all domains. Using the same
values as in arcada.
BUG=None
BRANCH=None
TEST=Build and Boot hatch EVT
Change-Id: If8ea48794d11dc68e40e6504c0d46a2b273a8ab6
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPIO46 is wired to a tiny switch on the board labelled "GPU Boost".
Since coreboot could make use of it, add a comment about it on gpio.c.
Change-Id: I0efa85e6d8235711521b10e56b7c89a25c4b2b7f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This GPIO is corrected with reference to the Apollo Lake SoC EDS Vol 4
revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be
used in Function 0 (GPIO) mode.
Change-Id: I98628ade3a1e19730ca6e6b4a63c28e6816176ce
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
We need to reduce the eMMC bus speed for these Apollo Lake mainboards
because of a limitation on Intel side for industry use cases.
Change-Id: Ide6a1a302001c0752d149bfdab175a27c8f8cc35
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Currently some of the LCM ID voltage gaps are below 100mV. For example, the
voltage difference between ID 2 and 3 is 503-440=63mV. To reduce the risk of
misrecognition from the hardware level, the voltages are adjusted so that all
the voltage gaps are larger than 100mV. The RD2 resistor values are also
updated.
BUG=b:136987483
TEST=emerge-kukui coreboot
Change-Id: Ib5c1f927fb54d8c9579f030e42eeec5a27daaceb
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34192
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The tolerance of ADC is +-10mV, but the resistors may also
introduce 1% variation, and causing the final measured
voltage to vary around 5%.
By the advisory from hardware team, checking the tolerance
seems not really solving or helping anything so we should
just ignore that and try to find best matched ID (this
also aligns to what Gru did).
BUG=b:136990271
TEST=Booted on Krane and no longer seeing ADC out of range
BRANCH=None
Change-Id: Ie02ca5aaafbcfa8f411d973ad0266eee385d6878
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34161
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Frank Wu