The BUC register is actually only 8 bits wide and setting bit 5
(disabling GbE) is already done by generic code.
Change-Id: I4b8e14606c319e8bfc48d6757087f28af1bd5dfb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Only set LPC decode bits that the generic PCH code doesn't set yet. And
don't enable the IOAPIC, which is already done by generic code.
Change-Id: I9d2f6a9ad3f5d83573e07596f2763edc75f4ee64
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This bit is already cleared by a reset.
Change-Id: Ib71496011c9621476a7327ba309f367c7fa971e4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This bit is used to indicate xHCI routing across reboots. If anything,
coreboot should act on it, not set it during boot. ASL code would be
supposed to set it.
Change-Id: Id14647ac4e591cfa042ca8aad6dfc6ccda35c74a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The generic PCH code already enables a superset of LPC decoding. Move
UART setup to bootblock_mainboard_early_init() where it is expected.
Last but not least, remove an odd write to BUCs (RCBA+0x3414) and
beyond, as it's an 8-bit register and shouldn't be bluntly zeroed.
Change-Id: I24a4ccf6a529460a83f48522d2e05e6ad6614f81
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
mainboard_pch_lpc_setup() and mainboard_late_rcba_config() did 4
things here on top of the generic PCH code:
1. Enabling LPC decoding for gameports. It seems unlikely
that anything is using these ports and there is no code
to support gameports.
2. Decoding of COM3 instead of COM2. What COM?
3. Premature locking of ETR3/global reset. Bad idea.
4. Disabling the GbE port in BUC. Already done by PCH code.
Change-Id: Ie92dbf5c6813435995c4d24ed807ffc8d125953a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
There is some overlap between romstage and bootblock.
LPC setup and BAR initialization is now done twice.
The rationale is that the romstage should not depend too
much on the bootblock, since it can reside in a RO fmap
region.
Enabling the console will be done in a followup patch.
Change-Id: I4d0ba29111a5df6f19033f5ce95adcc0d9adc1fd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The romstage default is to set stack guards at 0x2000 below end
of stack. The code is now overwrites some of the stack guards
so increase the stack size to a comfortable 0x2800.
Change-Id: I91f559383a987241b343e743d11291f2c100f7f5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This also changes the name to mainboard_pch_lpc_setup to better
reflect that it is an optional mainboard hook.
This adds an empty weakly linked default. The rationale behind this
change is that without an implementation of the hook some features
might not work but that the result is likely still able to boot, so it
can be made optional.
Change-Id: Ie8e6056b4c4aed3739d2d12b4224de36fe217189
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This also changes the name to mainboard_late_rcba_config to better
reflect what it does.
This adds an empty weakly linked default. The rationale behind this
change is that without an implementation of the hook some features
might not work but that the result is likely still able to boot, so it
can be made optional.
Change-Id: I1897d0f5ca7427d304a425f5256cd43c088ff936
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This always builds the usb debug callback functions when implemented.
They get garbage collected if CONFIG_USBDEBUG is not set.
Change-Id: I33051df583645cd00d08e06774383763172d5822
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The declarations in usb_debug.c needs to be guarded in order to not
conflict with other chipsets.
Change-Id: I84c3401b9419f2878c2cfdf81147fa854018f9ae
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36878
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds an empty weakly linked default. The rationale behind this
change is that without the callback some features might not work
but that the result is likely still able to boot, so it can be made
optional.
Change-Id: I62c8010aa81fc45d208e9293feb2f45b45f34a82
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
In order to always show the bootlogo very early in coreboot we need the
option to always enable the display when VBOOT is enabled.
To do this a config option is added to make sure this functionality can
be provided without interfering with systems that require the standard
VBOOT display handing.
BUG=N/A
TEST=tested on facebook fbg1701.
Change-Id: I3ffaac85d2082717bb9608d536f7cec66a583789
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Some special keys emit a prefix scan code 0xE0. We will ignore all
these except for the power button, F12 and cursor keys on drallion.
Media key mapping is set in depthcharge and will be sent to libpayload
keyboard driver. Whichever board requires this change will update its own
media key mapping.
BUG🅱️139511038
TEST=boot in recovery mode, press F12 to go to diagnostic mode and power
button to confirm. Also in recovery mode left arrow, right arrow, up arrow,
down arrow changes the language on the firmware screen.
Change-Id: I1c11939d18391bebe53ca21cf33a096ba369cd56
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36654
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Leave more space for PreRAM memconsole especially for seeing complete
logs when doing DRAM full calibration (that outputs in 200+k to UART):
- Shrink Full-K mem space (the ELF blob today needs ~132K)
- Move PRERAM_CBFS_CACHE to L2C since it's no used after DRAM is up
- Shrink TIMESTAMP to 1k (all other non-MTK ARM SOCs use only 1k)
- Incease PRERAM_CBMEM_CONSOLE to 63k-4
- Reordered few sections to align at better locations
BUG=b:144542023
TEST=emerge-kukui coreboot chromeos-bootimage; boot and see logs
Change-Id: I8696fb01653c0a581cf62e687dc523cb6fed9a32
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Setting GPP_A10 to NC now that older boards are deprecated and this
GPIO is not in use anymore.
BUG=b:142056166
BRANCH=hatch
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: If8a249a3dcba90bb4ccb5e3f02595e680f789f93
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36869
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The eltan security items ended up in the chipset menu which is not
desired. Now the eltan security option (when enabled in mainboard) shows
up in the security menu.
BUG=N/A
TEST=build
Change-Id: I3b2aa3836e8d9a3242c6d1f3ba7b7821a5cfb9d3
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
These mainboard don't feature a SPI flash. The SPI init code
will timeout on probing for a SPI flash which takes a lot of time.
Not including all SPI drivers also lightens the uncompressed ramstage
of about 17K or 7K compressed.
Change-Id: Icc7bf62d56fc2ef38854402e658830b8d59c737f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36870
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On devices lacking SPI boot devices there is a hefty timeout
penalty on probing for flash chips and this code would not
be useful anyway.
Change-Id: I0bec11372ef54c1e1e611b81f7013932257f4ca6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36868
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id e561c63:
2019-10-02 17:03:58 +0530 - (lib: Fix coldboot race condition observed on emulators/simulators)
to commit id 215421c:
2019-11-11 16:40:34 -0800 - (lib: Remove date and time from init message)
This brings in 13 new commits and allows reproducible builds with
opensbi.
Change-Id: I0fb9e0921b017822defa8b56df5a0f3e014d7f33
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The verified_boot_check_cbfsfile() will now try to allocate a buffer from
bootmem if the item in the list has the VERIFIED_BOOT_COPY_BLOCK attribute
set. For large payloads this speeds up the hash operation.
BUG=N/A
TEST=build
Change-Id: Ifa0c93632c59d05ae6d32f8785009a3c3568abc5
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
vboot_possibly_executed previously provided some better
compile-time code elimination, before CB:32716 made
vboot_logic_executed capable of that directly.
BUG=b:124141368,
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: If5ca8f03c51e1ced20e1215b1cfdde54da3d001f
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36863
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The comment in the source referred to an earlier approach, so update
it to match current reality.
Change-Id: I9a23ec0a719fb623cfd465c397ef7ef16550b93c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
The old code stumbled when the whole first group of root ports
was disabled and also made the (sometimes wrong) assumption
that FSP would only hide function 0 if we explicitly told it
to disable it.
Change-Id: Ia6938ca6929c6d9d0293c4f0f0421e38bf53fb55
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36702
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Most of the current implementations for FSP-based platforms
make (sometimes wrong) assumptions how FSP reorders root ports
and what is specified in the devicetree. We don't have to make
assumptions though, and can read the root-port number from the
PCIe link capapilities (LCAP) instead. This is also what we do
in ASL code for years already.
This new implementation acts solely on information read from
the PCI config space. In a first round, we scan all possible
DEVFNs and store which root port has that DEVFN now. Then, we
walk through the devicetree that still only knows devices that
were originally mentioned in `devicetree.cb`, update device
paths and unlink vanished devices.
To be most compatible, we work with the following constraints:
o Use only standard PCI config registers.
o Most notable, don't try to read the registers that
configure the function numbers. FSP has undocumented
ways to block access to non-standard registers.
o Don't make assumptions what function is assigned to
hidden devices.
The following assumptions were made, though:
o The absolute root-port numbering as documented in
datasheets matches what is read from LCAP.
o This numbering doesn't contain any gaps.
o Original root-port function numbers below a PCI
device start at function zero and also don't
contain any gaps.
Change-Id: Ib17d2b6fd34608603db3936d638bdf5acb46d717
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35985
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is some overlap between things done in bootblock
and romstage like setting BARs.
Change-Id: Icd1de34c3b5c0f36f2a5249116d1829ee3956f38
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36759
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Console init in bootblock will be done in a separate CL.
Change-Id: Ia2405013f262d904aa82be323e928223dbb4296c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36795
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds 3 mb romstage callbacks:
- void mb_lpc_setup(void) to be used to set up the superio
- void mb_get_spd_map(u8 spd_map[4]) to get I2C addresses of SPDs
- (optional)mb_pre_raminit_setup(int s3_resume) to set up mainboard
specific things before the raminit.
Change-Id: Ic3b838856b3076ed05eeeea7c0656c2078462272
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36758
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On mainboards without DPTF_TSRX_SENSOR_ID method DTRP is never called
Only add the DTRP method when at least one sensor is enabled.
BUG=N/A
TEST=build
Change-Id: I4fb26d5bbb7b334e759e7073b680f830f412467e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36856
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add IFD and ME binary to generate complete SPI image.
BUG=N/A
TEST=Boot Embedded Linux 4.20 on Facebook FBG-1701
Change-Id: I9370bf9f2bba8887988bc6484524f6cf53bed8db
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34448
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upgrade to blobs version with descriptor and Intel ME binary
BUG=N/A
TEST=booting Facebook FBG1701
Change-Id: I2143b94a81eebfb22d99833aaf1f3743983dd80c
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34442
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The prepare() callback is no longer utilized in the code. Remove
the callback and support for it.
Change-Id: Ic438e5a80850a3df619dbbfdecb522a9dc2c1949
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
This patch renames pch_early_init() function as per review feedback
CB:36550
Change-Id: I9f638e738d1a910b688cc3e51795230b2e542f82
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
GPIOs related to power sequnce are
GPIO_67 - EN_PP3300
GPIO_117 - FULL_CARD_POWER_ON_OFF
GPIO_161 - PLT_RST_LTE_L
1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161
2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67
3. Power reset:
- keep GPIO_67 and GPIO_117 high and
- pull down GPIO_161 for 30ms then release it.
BUG=b:144327240
BRANCH=octopus
TEST=build image and verify on the DUT with LTE DB.
Change-Id: I68b71425391eda1e92806fecdb9c8dcd54f0b95a
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36771
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Nico Huber