The SPDX license header for this file did not match the license text
in the file.
Update the SPDX header and remove the license text.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ifc0db79e43df6d14b80b0ad3061fe42de17ed90f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77379
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Program the EC GPIOs to enable the DT or M.2 SSD1
PCIe slots based on the config option selected.
Change-Id: Id141e5e55ef6e25722b411975a59c9764b86f624
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Set EnforceDdrMemoryFreqPor to 0 for RMT builds. This is needed
for proper functioning when EnforcePopulationPor is set to 1.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: Icf4fe01ac9b546830334717dbfa53782d2a85ba1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Based on "MediaTek_EFUSE_MT8188_Confidential A_Technical Doc.docx",
MT8188G used in ChromeOS project does not support clock hardware
monitor. Thus, we can simplify the initialization flow by removing the
hardware default value check.
BUG=b:292866009
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: I07cd753f153da5b0aea1518a04a818214f986aeb
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77334
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
When the script is run, it fetches a new copy of the repo, then creates
a tag, signed by GPG. When this signing step runs, a window pops up for
the user to enter their PGP key's passphrase. This window prevents the
user from doing anything else on their desktop, like looking up the
passphrase. It also times out after a while, and causes the script to
fail at that point.
To prevent this annoyance, pause right before the step asking for the
passphrase until the user is ready.
Because the submodules aren't tagged, we can delay their update until
after the tag is created to lower the amount of time needed before the
tag & signing step.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I414dfc0f8944b4408881392278a2bce2a364992b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77366
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This script allows any user with abandon rights to abandon patches that
haven't been touched (reviewed, commented on, rebased, etc) in over a
year.
As a part of the release process, we're now going to run the script to
abandon all of those patches so that we don't get to the point of
needing to abandon 1300 patches again in the future.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4a07c09edf02d9c1858a58322095eefbceb529d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Create the quandiso variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:296506936
BRANCH=firmware-nissa-15217.B
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_QUANDISO
Change-Id: I846c39260e2db504d7bec6e81a8317b6824c17f4
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
According to the schematic, karis does not have a WWAN temperature
sensor, remove related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ic82c6cfec067faa37d452bed5c4977402a2139a5
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77284
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
When using the Windows fast startup mechanism which is enabled by
default, Windows will use a cached version of the ACPI tables during
normal boots after a clean shutdown. Since I've run into this issue and
spent quite a bit of time debugging the wrong issue due to this, better
document this possibly unexpected behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia9e65f6a3aff13fa54abe68c8f5fcbf9bc6efc1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Add some HDMI-related gpios that are needed for early sign-of-life
to the early_graphics_gpio_table array so that SOL will show up on
HDMI ports.
BUG=b:277861633
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage` and verify it builds
without error.
Change-Id: Ic36a636e68c2d457f40329a2e9c69dab5bbba41f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77353
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move specific options under the boolean and remove dummy
SOC_SPECIFIC_OPTIONS.
Change-Id: I6ae52ceb61489e5a050a60d1fbbf4250960407eb
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This will include this new commit:
* Add GenoaPI 1.0.0.4 blobs
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I216580653ed22d961fa4d79622fdcc3985c36316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77355
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the schematic, karis does not have a WFC.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I9b4ecf2e96c77c131a60e48614d792370dd33423
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Allows coolstar's Windows overlay drivers to attach, while not affecting
operation under Linux or ChromeOS
TEST=build/boot Win11, Linux 6.x on google/drallion
Change-Id: I30ab2e9da00743c4d7086aac94652be46040f36d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77305
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allows the EC to be properly notified of type-c events like charger
wattage too low (eg),
TEST=build/boot Win11, Linux 6.x on google/drallion
Change-Id: I7a4130cf6f8c24e3f91e327adf1f3e563322c0af
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77282
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set the USCI device scope to _SB and set HID to USBC000 so Windows
driver attaches. This matches the ACPI used by the non-Chromebook
version of the Dell Latittude 7410 (which uses the same EC).
TEST=build/boot Win11 on google/drallion
Change-Id: If482fa4a4856c7bc085795bc72b35ebefe2f15c4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77281
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both Windows and MacOS get cranky if the Mutex synclevel is non-zero,
aborting any Acquire() call with Mutex param that has a non-zero
synclevel.
TEST=build/boot Win11 on google/drallion, verify DPTF driver loaded and
functional.
Change-Id: Ie77e9ed04658b508b2063ae219afcdc0ac465c58
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77279
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The RPL PCH uses a different ACPI Device ID than ADL PCH.
Ref: Intel 700 Series Chipset Family PCH Datasheet, Volume 1 (#743835)
Change-Id: I03f47a43ff985213ad617e834db7f974f687d877
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The doc.coreboot.org container is several years out of date, using the
three year old Alpine 3.8 as the base image along with Sphinx related
pip packages which are even older. Accordingly, update the documentation
related pip packages in the coreboot-jenkins-node container as well.
- Update doc.coreboot.org to Alpine 3.18.3
- Update documentation related pip packages on coreboot-jenkins-node
and doc.coreboot.org to the latest versions on PyPI
- Update Sphinx to 6.2.1 as the latest version of sphinx_rtd_theme does
not yet support sphinx >= 7
The updates also noticeably improve performance, dropping documentation
build times from ~75 s down to ~42 s on my system from the Alpine+Python
updates alone, and further down to ~35 s with the rest of the updates.
TEST: The documentation builds and renders properly when built using the
updated container.
Change-Id: I38dfd22ee71c3779ab5fd3b3060e4675e9e3fe54
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73159
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If IASL isn't installed, the genbuild script throws a confusing warning.
This can and should be ignored because toolchain.inc will find this and
provide a much better error message.
The trailing >/dev/null was probably intended to do this, but didn't
actually affect anything.
Adding quotes around the IASL command will make "" be the command that
tries to get run instead of `-v` when IASL isn't present. This will
always be a failure, whereas `-v` could theoretically be a valid
command.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ibff93db670766c4de21faa7553f2003450465407
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Similar situation happened last year when IoT FSP for ADL-S came out
before the Client FSP variant: https://github.com/intel/FSP/issues/83
It seems IoT FSP publishes the MemInfoHob.h file much later due to
legal reasons. Hack the missing file to get the builds using RPL-S IoT
FSP from repo working properly.
This change could be merged, subject for later revert (when the header
file is published).
Change-Id: Iec35db4573a3c3d011e4c1edf1c82a5c34438695
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
PchPcieClockGating and PchPciePowerGating UPDs are not yet available
in RPL-S IOT FSP. It also looks like those UPDs are not generally
available in all public RaptorLake FSP headers yet, so guard it
against SOC_INTEL_RAPTORLAKE to avoid build errors.
Change-Id: Iedac21bafa3428957e054fc8fefa38f9f776772d
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77337
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This adds a Kconfig option to select memtest86+ version 6 as a secondary
payload and sets that as the default. The coreboot version 5 code may
still be selected and used if desired.
Compiling for 32 bit requires glibc from multilib installed, if the host
system is running on 64 bit, as header files, e.g. gnu/stubs-32.h, are
required from there. So introduce a new choice menu which allows to
choose between 32 and 64 bit.
By default, the stable 6.20 version is selected instead of the top of
the main branch.
TEST=Build both V5 and V6, boot them in QEMU
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Change-Id: Ie0eedc25fcf37b925b072ca809c019a599a20392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The indentation resulted in the following error:
…/Documentation/soc/amd/psp_integration.md:22: ERROR: Unexpected indentation.
Alas, the line number refers to the embedded rst.
Change-Id: I9526d023af5207602c4a4cea7704b547ef1b7bf0
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
This binutils patch was pushed by the original author using the word
"loosing", which means "to release" instead of "losing", meaning to drop
or misplace.
I did not change the spelling of the commit message inside the patch so
that the patch can still be tracked easily, but wanted to fix the
mistaken spelling which appears when the patch is applied when building
the crossgcc toolchain.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I66fd596a79c9eb331f473d175180cf7bb5a38529
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
- Change delimiter characters to safe characters to keep the output
from getting mangled when imported into a spreadsheet.
- Change hyphens for statistics to asterisks for easier use in the
release notes.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I94f581d697f58cb29a662ac70ef9fd1d8c1e98ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
- Print submodule updates the way we want it for the release.
- Change hyphens on stats to asterisks.
- Add asterisks before authors.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I23e39fa47fe418ee51fb957fcb5fc25b50950e38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77331
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The -f|--fetch option is being added to download and verify the tarballs
without doing a build. This will be used specifically to archive the
toolchain tarballs for the release.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia68dbdcbf2d0fa4bb433511dc5e2f980f6762204
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
We've had issues in the past where building with a sufficient number of
processors would expose a previously hidden timing issue in the build.
Those have frequently been in the path of a single chip or architecture,
so this adds a few different builds.
I'd like to have a representative sampling without increasing the build
time too much so maybe in the future, we can modify the clang build
targets to be different than the GCC targets.
These can be updated to different targets over time.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I51e39bc1ce6b9b7c257d0170ce3d2b5ab99d35df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The test-abuild target fails since the `scan-build` switch is missing a
dash. Fix it.
Change-Id: Iae10f639c43fed7709698e620e732cddce5658d8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
scanbuild and ccache don't work together, so separate ccache from the
rest of the abuild options. All of the other tests get ccache, but
scanbuild never does.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If057ed20c687ac8b501d20c6b4af91f8c0ab84b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
When installing the python modules with pip3 as root, the installer
throws a lot of warnings about conflicts and recommends that it not
be run that way. This change installs the python modules as the
coreboot user instead. The --break-system-packages argument can now
be removed.
It takes along some other changes made to the coreboot home directory
which also don't need to be run as root, and now adds the .local/bin
directory into the path.
The trailing docker PATH configuration is discarded as cleanup - it
doesn't have any effect. Nothing uses it in the Dockerfile, and it
doesn't end up updating the path, which is set by /etc/profile.
Change-Id: Ie8273009bb527e267584bba84504191aa7294ca3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76855
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The libfreetype6-dev has been a transitional package pointing at
libfreetype-dev for a while now. The libfreetype6-dev package is
currently out of date in debian sid, so it's a good time to switch
away from it.
TEST=Rebuild coreboot-sdk
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If40e9eacf871d3840745ea18ec2ff5975cc62da7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77328
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Line is a duplicate, commented out. Drop it as it serves no purpose.
Change-Id: Id35bdea0915ca47cac4f38ede6ccbf2f2fb59f47
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77304
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Registering Clock Driver (RCD) is responsible for driving address and
control nets on RDIMM and LRDIMM applications. Its operation is
configurable by a set of Register Control Words (RCWs). There are two
ways of accessing RCWs: in-band on the memory channel as MRS commands
("MR7") or through I2C.
Access through I2C is generic, while MRS commands are passed to memory
controller registers in an implementation-specific way.
See JESD82-31 JEDEC standard for full details.
Change-Id: Ie4e6cfaeae16aba1853b33d527eddebadfbd3887
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Won Chung