The `gitconfig.sh` script installs hooks to the according directories
(for coreboot and its submodules). It has the `hooks` directory
hard-coded to be `.git/hooks`, which makes the installation fail when
coreboot itself is a submodule because then `.git` becomes a gitfile.
Replace hard-coded path handling using the according `git rev-parse`
calls.
Change-Id: I778e20be24bb27d0081c9e1c12883117d6d50347
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The name blobtool is confusing as 'blob' is also used to
describe nonfree software in binary form.
Since this utility deals with binary configurations it
makes more sense to call it bincfg.
Change-Id: I3339274f1c42df4bb4a6b30b9538d91c3c03d7d0
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/23239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The bash script `genrelnotes` checks for `.git` to be present to
determine whether the current directory is the top directory of a git
worktree. This check is rather weak and doesn't handle many edge cases
like that of a broken gitfile.
Add a proper `git rev-parse` call to check the condition.
Change-Id: I32b06ca982d55fd8e88e55651b6bc53014905823
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Primary to Sideband Bridge (P2SB) is the interface to Private Con-
figuration Registers (PCR) including GPIO configuration. Of course,
access is restricted to Intel partners and criminals, so the PCI device
is hidden from the OS. Probably we only need to fetch the SBREG_BAR
address and can hide the PCI device again after that.
Change-Id: Ic121a09f021708aab82ae4b9d76d6c3c6fb884fa
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
GCC includes `sched.h` after poisoning calloc(). This results in a
build failure with Musl libc. We work around the issue by including
`sched.h` earlier and throw around some void pointers so we only
have to do it in one place.
Change-Id: I1d5462eb9a448147a95dd4ec50361b3f5a28910c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Looks like we were unnecessarily dragging this around for some time now.
GCC's installation manual doesn't mention libelf as a requirement and a
build of crossgcc-i386 doesn't show any sign of it being used.
This also fixes a lot issues on non-GNU distributions that were intro-
duced by switching to the elfutils version of libelf.
Change-Id: Iff308a9bed9ae3842557d251b75d1faadfafe0da
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the buildgcc script, there is a check that the tools required are
installed. When a tool is missing, a message is output suggesting an
installation method, e.g. `sudo apt-get install foo` on debian-based
systems.
When run on a true, vanilla debian system, the error message provides
only a generic hint because the `please_install()` function fails to
detect the OS kind. Detection is based on definition of `ID_LIKE` in
`/etc/os-release` yet such systems only define `ID` to `debian`.
This commit closes the detection gap. Tested on debian 9 (stretch).
Change-Id: I3c867837e9157bee13010bd0a005028c369ce55f
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
They both have a device id of 0x3c. The former is part of the PCI chip set
accessible via port 0x3f0 while the latter is a standalone LPC chip accessible
via 0x2e/0x4e depending on strapping.
They're not register compatible: the VT82C686 only provides a FDC, LPT and part
of UARTs.
The VT82C686 documentation suggests it has revision 0x00 while the VT1211
datasheet indicates 0x01. Nevertheless, the VT1211 I happen to have hs a
revision of 0x02. Thus the revision is probably not good enough to tell one
from the another.
Change-Id: Ic7529c84724c8d6b9eb75b863f1bceef5e4b52b5
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/22254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The `secimage` utility uses OpenSSL to calculate HMAC, which it does in
a rather unorthodox way, using deprecated `HMAC_CTX_init` API and
repeated calling of `HMAC_Init_ex` without a clear reason. The former
causes build errors with OpenSSL 1.1 while the rest of the
`HmacSha256Hash` function is confusing and overly complex.
Make `HmacSha256Hash` use a single OpenSSL API call. Test passed:
resulting signed binary remains identical.
Change-Id: Ib23c0ad96f9d8cc30ad357de8c0b0ba967c7d724
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Due to the lack of a datasheet, defaults are shown as
"not available (NA)" in the register dump.
Change-Id: I6baaf5dd95453fb1265425f357ea16c710c006ba
Signed-off-by: Gergely Kiss <mail.gery@gmail.com>
Reviewed-on: https://review.coreboot.org/23084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
After running `lint-stable` in the pre-commit hook, its result is
ignored. This behavior was introduced in commit b18f522b
(lint/gitconfig: Enable checkpatch.pl checking of commits) and it
doesn't seem intentional. This issue was also mentioned in the revert
discussion (https://review.coreboot.org/c/coreboot/+/17440).
Enable `errexit` mode of the shell so that the hook fails when an error
occurs in any of the tests. Also, enable `nounset` mode to catch typos
easier.
Change-Id: I749963167660ea6a1a04d40a14ad1113e82f0f86
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add the 8086:191f North/Host Bridge to the list of definitions.
Adding the definiton makes the Northbridge get recognized by inteltool.
It is found in the Intel i5-6600K CPU:
https://ark.intel.com/products/88191/Intel-Core-i5-6600K-Processor-6M-Cache-up-to-3_90-GHz
Change-Id: Id746d1e8b3bb90b3b68a2f6c372890671dd61b5f
Signed-off-by: Christoph Pomaska <cp_public@gmx.de>
Reviewed-on: https://review.coreboot.org/23055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Now that all the files under util/gitconfig have their license headers,
enable lint-000-license-headers to check the directory too.
Change-Id: I242256f72ac70553535509f83166c6d1ddb16fdc
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
License header for the `gitconfig.sh` was copied from the Makefile it
was extracted from in commit 9ab8ae6a (util/gitconfig: Make gitconfig
a bash script).
License header for the pre-commit hook names Patrick Georgi as the
copyright holder as he is the original author.
Change-Id: Ie051e5e6ae7571050ece383e6be8236ed7d1ddd9
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When running `make gitconfig` on a freshly cloned repository, the script
will wait for user input without a prompt in a call to `sed`, caused by
a spurious newline introduced in commit 9ab8ae6a (util/gitconfig: Make
gitconfig a bash script).
Change-Id: I2aa722c052d24dcffa9688df09bcf8dc767bd0b6
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
On debian systems, /bin/sh is `dash` which has built-in `echo` always
interpreting escape sequences such as '\n'. The pre-commit hook uses
the built-in for piping diff to checkpatch, interpreting the diff's
escape sequences in the process and leading to false negatives
and preventing commits despite conformance.
Use `printf` instead of `echo` when handling diff content. The bug was
introduced in commit ef869305 (util/gitconfig: update pre-commit
script).
Change-Id: I37edfe7b32721cb63d99299563cb11f26082c9a9
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Falling through is intended here, so add a comment that GCC will notice
and stop warning about this.
Change-Id: I12637b6bc18844a3bc47f06208df7fee7a4feb3b
Found-by: gcc-7 (Debian 7-20170316-1) 7.0.1 20170316 (experimental) [trunk revision 246203]
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/18906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Omar Pakker
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The initial lookup for cbfs location for xip stages is implicitly
using the ELF size assuming it's relatively equivalent. However,
if the ELF that is being converted contains debug information or
other metadata then the location lookup can fail because the ELF is
considerably bigger than the real footprint.
BUG=b:70801221
Change-Id: I47024dcd8205a09885d3a3f76e255eb5e3c55d9e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22936
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The gitconfig target has a few bashisms and would fail
silently on systems that use a POSIX standard sh (like Ubuntu dash).
Remove the code from the makefile and put it in a bash script that
is called by the gitconfig target.
Change-Id: I3bc8cf688a3ad211b57c8ca0e6b1e86c82dc6a37
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/22857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The code flow is changed slightly to print the timestamp frequency from
either method of determining it.
BUG=b:70432544
TEST=Build and test cbmem -t -V
Change-Id: I02286fa67919e70a3592cdbcc1c9ca2991b7f385
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/22821
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The default implementation uses inb/outb, that is not available on ARM
platforms and others. A dummy implementation allows building nvramtool
on these platforms.
Change-Id: I75e4a1a0cbd35ca40f7b108658686839ccf9784a
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/22562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds '-p' to the 'add' command. It allows the add
command to specify the size of the padding added with the file
being added. This is useful to reserve an extra space in case
the file is too big to be relocated.
BUG=b:68660966
BRANCH=none
TEST=emerge-fizz coreboot &&
cbfstool image.bin add -n ecrw -f EC_RW.bin -p 0x10 ...
Verify image.bin has extra space in the file header.
Change-Id: I64bc54fd10a453b4da467bc69d9590e61b0f7ead
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/22239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Forgot the /bin/ part of the executable paths
Change-Id: I87d63ec18338e376787d02bb771471e746a17b62
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/22640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a CBSDK tool set template that can be used in edk2 simply by
appending $prefix/share/edk2config/tools_def.txt to Conf/tools_def.txt.
After that, build -t CBSDK uses the coreboot compilers, providing a more
predictable compiler choice.
Change-Id: I76b38c928b831ee6f31450aa0ad59b4f906f394d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/22570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With this implementation it's possible to detect the state
of bootguard in intel based systems. Currently it's WIP and
in a testphase. Handle it with care!
Changes done:
* Add support for reading msr
* Read ME firmware version
* Print bootguard state for ME > 9.1
* Make argument -s legacy
* Add argument -b for bootguard (and ME) dumping
* Add argument -m for ME dumping
* Opt out early if CPU is non Intel
Change-Id: Ifeec8e20fa8efc35d7db4c6a84be1f118dccfc4a
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/16328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Clean the code to fix all errors and warnings.
No functional change.
Changes:
* Fix lines over 80chars
* Fix typos
* Restructure code to reduce indent level
* Move RCBA handling into own files
* Introduce helper functions for RCBA access
* Move GPL string into header
* Fix whitespace in macros
Change-Id: Ib8e3617ebb34c47959d6619dfbc7189045e6b8f7
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Both registers behave the same as on the previous generation
Taken from
* 6th Generation Intel Processor Families for S-Platform
Volume 2 of 2
* Page 55 and 62
* 332688-003EN
Change-Id: Id02a38a7ab51003c9d0f16ebb2300a16b66a15f9
Signed-off-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/22350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Register definitions were taken from
* 6th Generation Intel Processor Families for S-Platform Volume 2 of 2
* Page 117
* 332688-003EN
As well as
* 6th Generation Intel Processor Families for H-Platform Volume 2 of 2
* Page 117
* 332987-002EN
Tested on a 6th gen skylake mobile cpu and capability registers do match up
with the default values.
Change-Id: I636f6c3d045e297f1439d3e88e43f41e03db4c8e
Signed-off-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/22345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The warning is printed using Printf syntax but actually Println is used
resulting in printing the format string first and the arguments second:
"%s. (%s) Default:%s WARNING: [...]"
Change-Id: I411fc47832dd7a82752f233c4909b98190340ccb
Signed-off-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/22352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
- Fix initial tool check.
- Admit that the script is coreboot specfic. Remove coreboot check.
- Fix some whitespace issues.
- Get rid of pushd/popd.
- Add keywords for section logging.
- Move code for getting SLOC into a subroutine.
- Find submodules to get patch count instead of having them hardcoded.
- Update specific change areas for 4.7 release
Change-Id: I115659a75604c24780c09605d7643e83e481f6a1
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/22343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When autoport is run on a system without supported southbridge
it won't populate the coresponding data structure. By sanitiy
checking after PCI detection autoport can exit cleanly and
provide a sufficient error message.
Error was:
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x30 pc=0x4be595]
goroutine 1 [running]:
main.FIXMEEC(0xc42014af80, 0x14, 0xc42014afe0, 0x1a, 0xc4200a914f,
0x4, 0xc4200a916f, 0xf, 0xc420149e60, 0x28, ...)
/coreboot/util/autoport/ec_fixme.go:14 +0x105
Change-Id: I6b0fcda76d33b0d3a0379c279f492160ce5add84
Signed-off-by: Maximilian Schander <maxschander@googlemail.com>
Reviewed-on: https://review.coreboot.org/22203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
In some cases users may want to build just one toolchain not all. This
patch introduces COREBOOT_CROSSGCC_PARAM, which by default is set to
all_without_gdb so previous behavior is not changed. Users can pass
different parameter eg. COREBOOT_CROSSGCC_PARAM=build-x64 to build just
x64 SDK.
Change-Id: I858ba09644b5b86a4b0e828e4f342aee5083be93
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/22276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
In general more ME capabilities are considered harmfull, useless or
unwanted. Therefore an easy overview can be obtained by coloring in red
and green.
Taken from Change with id:
Ifeec8e20fa8efc35d7db4c6a84be1f118dccfc4a
Add bootguard information dump support
https://review.coreboot.org/#/c/16328/
Change-Id: Ia911cc935d512174399aaf93bba982e071942212
Signed-off-by: Maximilian Schander <maxschander@googlemail.com>
Reviewed-on: https://review.coreboot.org/22217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Refining some of the code indentations and cosmetics to
build upon and import some in-review changes.
Change-Id: I0038a146bd899f150518c4832258a42792abaabb
Signed-off-by: Maximilian Schander <maxschander@googlemail.com>
Reviewed-on: https://review.coreboot.org/22216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Users can do it if they need it, but we shouldn't force it on them.
Change-Id: I08007d68a79c302d8f3ca4ed0837ee96d8d3eb1e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/22213
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch adds a column to the print command to show the compression
algorithm used for the file.
Name Offset Type Size Comp
fallback/romstage 0x0 stage 56236 none
ecrw 0xf2380 raw 62162 LZMA (131072 decompressed)
BUG=b:66956286
BRANCH=none
TEST=Run 'cbfstool image.bin print'
Change-Id: I4bbb60ab467adac4ae5486ddafec86ad9682a40e
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/22196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using ifdtool to change layout on a 'ifd v2' file causes an error
about region type 5 not being valid.
The limit to check against is dynamic depending on ifd version, not
static.
Change-Id: Id4cdce4eac18fb0d171d1bdfa2044340bf93056a
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/21962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The new test lets git check if $top is actually a git repo, instead of
just looking for clues.
BUG=chromium:776174
BRANCH=none
TEST=`mv .git .foo; mkdir .git; util/genbuild_h/genbuild_h.sh` provides
a valid build.h instead of failing because git is unhappy about the
.git directory.
Change-Id: I7fcc64d66e0b59fca1479b4c142fd0559aa984f4
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/22107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
I noticed that the "last known good" field for the ThinkPad R400 pointed
nowhere. Instead of
https://www.coreboot.org/Supported_Motherboards#lenovo.2Ft400
it pointed to
https://www.coreboot.org/Supported_Motherboards#lenovo.2Fr400
which does not exist because if a board is marked as a "Clone of"
another one in board_info.txt, towiki uses the original board's reports
to derive the "last known good" date and color.
Change-Id: Ie235ca8e8691f49d041de7c5770eae77cdd444a7
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
bc is one of the standard posix utilities. I'm surprised that it's
not in the debian docker image by default.
Change-Id: I02f2d5296e7f87876b236af119965d1f4e6a0bc0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Also change the tarball from .tar.bz2 to .tar.xz.
Change-Id: I25134dbadf07a2f0cb356c8ac8f2c612a957d176
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/20806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
> Could you make in a separate, independent change a update from the
> completely outdated LIBELF (from mr511.de/software/libelf ) to recent
> libelf? Those highly outdated libelf from this unmaintained mr511.de
> webpage should not be used any more since years. There are also a ton
> of security issues like for example: CVE-2017-7607, CVE-2017-7608, ...
> CVE-2017-7613. Recent version of this software is included in the
> elfutils that are available here: https://sourceware.org/elfutils/ ->
> download link:
> https://sourceware.org/elfutils/ftp/0.170/elfutils-0.170.tar.bz2
Remove the obsolete patch, which doesn’t apply anymore, and only
affected the build system, which is different now.
Increment the buildgcc version string as a tool version is changed.
TEST=Running `make crossgcc-i386` succeeds.
Change-Id: Iadd320a18c5d9fe2a82a347e39f01d8b7f8806c2
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/21435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch address problem with Tianocore compilation in coreboot-sdk
container. Without it compilation fails asking for nasm installation.
Change-Id: I546f9d42b380799d1cd80a70f33be2a768745080
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/21924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martinroth@google.com>
buildgcc -B (--bootstrap-only) builds only a bootstrap compiler. That
useful if you want to package the cross compilers: first build the
bootstrap compiler, then all required cross compilers in a separate
directory (using the bootstrap compiler through an adjusted PATH).
Change-Id: I089b51d1b898d4cf530845ba51283997fd229451
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
util/scripts/gerrit-rebase and cross-repo-cherrypick serve the same
purpose and we don't need two of everything.
Change-Id: I66a71033a8a29249d214db4c31a67f8a0725163c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21926
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It does the opposite to "expand", removing a trailing empty file from
CBFS. It also returns the size of the CBFS post processing on stdout.
BUG=b:65853903
BRANCH=none
TEST=`cbfstool test.bin truncate -r FW_MAIN_A` removes the trailing
empty file in FW_MAIN_A. Without a trailing empty file, the region is
left alone (tested using COREBOOT which comes with a master header
pointer).
Change-Id: I0c747090813898539f3428936afa9d8459adee9c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change http to https on many URLs and update llvm.org URLs in buildgcc.
The old URLs are deprecated and now switched to a http forwarder that
can be attacked by MITM attacks.
Change-Id: I68d4fe1a6236ed8540803e11cfc84e44a1d1ca35
Signed-off-by: Doug Gale <doug16k@gmail.com>
Reviewed-on: https://review.coreboot.org/21729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The idea behind this not to enforce a license on autogenerated code
but is simply out of convenience in the case one wants to make the
result public (in which case it needs to have these license headers).
Change-Id: I1d6b48762b1249bb0becb178a30e1396bf6978fc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19510
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This generates better gpio.c files where structs are initialised as
static to be able to drop some entries since those would be
initialised as 0.
This makes these files less cluttered since only relevant things are
shown:
* GPIO direction, level, invert, blink depend on GPIO mode
* GPIO level is read only on input
* GPIO invert is only valid on input
* only show when GPIO are inverted, blinking, reset by RSMRST#
Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The AMD firmware directory can go in a number of different locations.
This patch allows amdfwtool to write the directory correctly for those
different locations.
If the --location switch is not added to the command line, the default
location at ROM base address + 0x20000 is used as before.
BUG=b:65484600
TEST=Set PSP firmware location, compare amdfw.rom to previously built
version. Verify new location pointers.
Change-Id: Ief32e5e37d56088946b623d305c6e93bfd6abeaf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch implements a relatively simple hash-based verification scheme
for downloaded files (tarballs):
After buildgcc downloads a file or notices that it has already been
downloaded, it hashes the file, and compares the hash against the known
hash stored in util/crossgcc/sum/$filename.cksum. Two errors can occur:
1. The hash file is missing. In this case, crossgcc asks the user to
verify the authenticity of the downloaded file. It also calculates
its hash and stores it in util/crossgcc/sum/$filename.cksum.calc.
If the file is authentic, the user may rename the calculated hash
file to $filename.cksum, so that it can be found the next time
buildgcc is started.
2. The known hash and the calculated hash differ. This is the case that
this patch seeks to protect against, because it may imply that the
downloaded file was unexpectedly changed, either in transit
(Man-in-the-Middle attack) or on the file server that it was
downloaded from. If buildgcc detects such a hash mismatch, it asks
the user to delete the downloaded file and retry, because it can also
be caused by a benign network error. If, however, the error persists,
buildgcc can't continue without risking that the user runs malicious
code, and it stops.
Note: The hash algorithm may be changed in the future, but for now I
left it at SHA-1, to avoid bloating this patch.
Change-Id: I0d5d67b34684d02011a845d00f6f5b6769f43b4f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Julius made some suggestions to fix/improve commit 46300aa2.
Implement those.
BUG=b:66681446
Change-Id: I6becac9ffdcc65745e88734dfb80d12b581584a1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The cbmem utility has inherited some workarounds that originated
from the default 1 MiB mapping always working. This 1 MiB mmap
won't necessarily succeed if the 1 MiB encroaches on a subsequent
memory range that has different cacheability.
To fix this, map in only 4 KiB when the table size is not known which is
the case for any forwarding entry or any low table entries on x86. That
smaller mapping is then searched for a valid header. Once a valid header
is found the full table is mapped and parsed allowing a forwarding entry
to take precedence.
Lastly, the lbtable is kept mapped in such that other operations can
just operate on mapping that was previously parsed.
In order to allow multiple in-flight mappings a struct mapping was
added which caused the ripple within the code. However, there shouldn't
be any more reasons for putting weird heuristics for when to fail. If
the tables are bad then it's very much possible that mappings will fail.
Retrying when the exact sizes are already known won't fix those issues.
BUG=b:66681446
Change-Id: Ica0737aada8dc07311eae867e87ef2fd24eae98d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Since the mapping is const just make all the data structure accesses
const.
BUG=b:66681446
Change-Id: I018cf2f2bfea2e736b097ecd1242af19c878ecb5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
vboot images come with multiple regions carrying CBFS file systems. To
expedite hashing (from slow flash memory), the FW_MAIN_* regions are
truncated since they typically have pretty large unused space at the
end that is of no interest.
For test purposes it can be useful to re-engage that space, so add a
command that creates a new empty file entry covering that area (except
for the last 4 bytes for the master header pointer, as usual).
BUG=b:65853903
BRANCH=none
TEST=`cbfstool test.bin expand -r FW_MAIN_A` creates a new empty file of
the expected size on a Chrome OS firmware image.
Change-Id: I160c8529ce4bfcc28685166b6d9035ade4f6f1d1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21598
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Fix typo in comment
- Aphabetize package list and put each package on a single line
- Add environment variables into coreboot user's .bashrc file
- Add openssl, qemu, and shellcheck to installed packages
Change-Id: I37771be5d3ecaa61d76d99e689b422144a6d7dc6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/21582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
- Update checkpatch.pl to version 0547fa58
(checkpatch: add 6 missing types to --list-types)
- Update spelling.txt to version d9f91f8
(scripts/spelling.txt: add a bunch more spelling mistakes)
- Fix an additional unescaped left brace in a regex - causes warnings
in new versions of perl.
Change-Id: Ic443099e90a46280f18d58799afc72d00dc83793
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/21581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If results are uploaded the temporary directory in which they are
stored gets deleted, yet we currently point to the deleted directory in
the output.
This patch fixes it so that we point to the actual location in the local
repository where uploaded results are found.
Change-Id: I1f42c3296ec1d19fcfa4911307e07e67de289895
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/21415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add find_fcba(), find_frba(), find_fmba(), find_fpsba()
and find_fmsba() to replace those copy-pasted addressings.
This commit is one separated from the original I6d05418c.
Change-Id: I98965711e4cb9792e5cc86cc4c1035559e0274f5
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Redesign some array-like structures as true arrays,
and rewrite functions to dump them as loops.
This commit is one separated from the original I6d05418c.
Change-Id: I161c9a2ae83d26e658d67d0804e943fff95fe076
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
There is no reason to keep a separate region_filenames array,
so I merge it into region_name(s).
This commit is one separated from the original I6d05418c.
Change-Id: I38489c6d3b3c161e9b0281188e6cdd0b62e38335
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21509
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Const-correct some functions which do not write back,
and use pointers to access existing region_t variables.
The last changeset is dismantled this time.
This commit is only focused on const-correctness.
Change-Id: I6d05418c8b32fa31dcd038a3e56f9aefe13fa9c4
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21288
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows the user to specify a custom path for cbmem on the DUT.
Change-Id: I2c28737d6efaae238fd6831cd3d00b2142b39a4c
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/21565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Sometimes the BUG/BRANCH/TEST metadata isn't separated by a newline
from the later git/gerrit metadata, which messes up further processing.
Add that newline to minimize the amount of human intervention required.
Change-Id: I37171bf6764b64e0ab0e81297a03f4d8b7744256
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
An internal index `i` was previously allocated as
Elf64_Half which is uint16_t. Bumping to uint64_t
increases the number of allowed symbols and prevents
a segfault in processing a larger ramstage.debug file.
Also introduce a separate counter for the number of sections.
Change-Id: I9ad2f64c452cef2e7bf957f766600891cb5ae798
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We don't actually care for them on our testers, just that the files
can be built.
Change-Id: Ib656a085d70e2aeb1601f1943ad8581af3133839
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21420
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The regular build doesn't build it, so it fails every now and then due
to changes in its dependencies.
Make sure we notice these early.
Change-Id: I0603b22887487d8871611d91e6f8ab0ec210bff1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/21390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Adds -A --any-toolchain option to abuild
This is handy for those who want to test compiling
all board configs with abuild using a non-coreboot toolchain
Change-Id: Idd599b0d2c324ad88ba3c83cdf3b180eb6d1fc80
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a missing line-break escape and, rather cosmetic, guard execution of
$CXX which we allow but don't force to be set.
Change-Id: Icf6d3b7de4b7999b8214489f28997964c490d1e9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21307
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Jenkins is giving warnings due tainted variables from the environment
and command line:
Insecure $ENV{PATH} while running setgid at util/lint/checkpatch.pl line
907, <$conststructs> line 39.
Insecure dependency in piped open while running setgid at
util/lint/checkpatch.pl line 907, <$conststructs> line 39.
This should fix those warnings.
Change-Id: I6a09915d13547bf9a86c011d44cbcd39c46f3fec
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch has been provided by Mentor Chih-Chyang Chang
on behalf of Andes Technology. It fixes using the coreboot
toolchain to compile the Chrome EC code base on the ITE8320
embedded controller.
The new patch incorporates a fix for the issue previously
fixed by patches/gcc-6.3.0_nds32.patch, so that patch can
be removed.
patches/gcc-6.3.0_riscv.patch needs to be slightly adjusted
to still apply cleanly (configure scripts only).
Change-Id: I0033888360f13ba951b692b3242aab6697ca61b3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In case there is no mode selected, sys and cpu variables are not
initialized, causing a segfault on exit (goto done).
Change-Id: I4a183c267e306598627c1612f4633f1e19019f3c
Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch>
Reviewed-on: https://review.coreboot.org/21026
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Passing a string containing output from strerror() to perror() causes
double error message display. It is also causing segfaults when the
error message is longer than temp_string capacity.
To fix the problems, sterror() call has been removed so the error
message is printed only once. This could be enough to avoid segfaults,
but it is a good practice to limit output size with snprintf().
Change-Id: I5ccc37e404f278cafae0a451c5acaa27d7907cce
Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch>
Reviewed-on: https://review.coreboot.org/21025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Relevant changes (commit 2e8761e):
* Add an option to truncate the ME image file
* Add full support for Skylake (ME 11) and following, including
modules removal, truncation informations and partition
relocation
* Add two options to generate a shrinked ME image file and the
corresponding descriptor with a modified flash layout
* Update README.md
* Bug fixes
Also add a link to the usage guide in the Kconfig help.
Change-Id: I690c5d558139f64f38babf3c0988b53834ba8b37
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/20915
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
- fix the error caused by signed integer extension
- fix fopen mode
- one minor style fix
Change-Id: Iacc4ea50515ea219bc1868dae0446d576e8dce0c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/21013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The final newline check is taking longer than we'd like to run. Since
it runs on every commit as part of the pre-commit check, we want that
to run faster than it currently does.
Remove LINT_SKIP_NEWLINE_CHECK as it's no longer needed.
Change-Id: Ie945dd6caba84e0d23af499d43367d70b1696089
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current signed-off-by check doesn't really work well as a lint
stable test being run by the pre-commit git hook. This test looks
at the PREVIOUS commit instead of the staged commit, which works well
on the server. In looking for a way to check the staged commit message,
I found the commit-msg hook, which is the correct way to check the
staged message.
- Update the commit message check from a lint-stable test to a
lint-extended test.
- Add the check for signed-off-by to the commit-msg hook
Change-Id: I8be8aef25730d988c7cf1586ae66ecb839d5f756
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
Apparently the script's output text is unclear.
Emphasize the file name, keeping the dot to close the sentence.
Change-Id: I1f214b71629eda5fc54e5671ce63e58948343656
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/21012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
- Add lint-extended as a valid option
- Call lint-extend from what-jenkins-does and test-lint
- When logging to a junit.xml file, name the file extended-junit.xml
so it doesn't conflict with the stable junit.xml file.
Change-Id: I7e4156844b8c60790e03a0e43564610bb0c8f386
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
The checkpatch script takes a while to run, so don't add it to the
lint-stable checks which run pre-commit.
Change-Id: I907176c21c057564495b75133ba10b0761c9fe7b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
Using sys/cdefs.h would come to mind,
however this include would not solve the build error.
Built and runtime tested on FreeBSD 12.0-CURRENT, r322031
Change-Id: I6ec9bc7fea72aa69a41439e002f381bd5e5b6bc6
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/20924
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently the only testing we had was 'what-jenkins-does' and
'make lint'. While the lint testing is suitable for developers,
the 'what-jenkins-does' target really isn't, as it was designed
specifically for testing on jenkins.
This adds the infrastructure for basic tests that are more suitable
for the developer. Extended tests and improvements will follow.
Add the coreboot-builds directories to .gitignore.
TODO:
- Save/restore .config
- Update test-abuild to use existing COREBOOT_BUILD_DIR variable
Change-Id: I19e1256d79531112ff84e47a307f55791533806f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@google.com>
In preparation for expanding the testing, move the test targets
out of the top level Makefile.inc and into a separate
subdirectory.
Change-Id: Ie252c7555223f9ce76b54e6f7b66d03f3cf60500
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@google.com>
- Check for original LinuxBIOS header from LANL
- Check for the BSD style license used in x86emu
- Add top level checks for src/cpu and src/vboot
- Add drivers dir check for aspeed, emulation, and sil
- Add mainboard dir check for digitallogic
Change-Id: Ie1ef6a39fd1d184815d22235d43780caedb2ca95
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The newline lint check takes forever as it checks every file
in the git repo -- not just the files changed. To add insult to
injury these checks are performed on every commit. Allow one to
skip this check by setting the LINT_SKIP_NEWLINE_CHECK environment
variable.
Change-Id: I1cd5c50627b73d68b0da2fcb2d9546eb874a7959
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
the __must_check function attribute is pretty much straight from the
linux kernel - used to encourage callers to consume function return
values.
Change-Id: I1812d957b745d6bebe2a8d34a9c4862316aa8530
Signed-off-by: Caveh Jalali <caveh@google.com>
Reviewed-on: https://review.coreboot.org/20881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Taken from crosstool-ng and and re-applied to 0.8.13
Change-Id: I43ad23b66ec10915cc68be8c395825f4f9161725
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Among other improvements, the new GDB has a new GDB/CLI
command to erase flash memory and a few Python scripting
enhancements.
Change-Id: Ie3852d5bc74617d3e05509e19bbd1caa281da3e0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Add support for setting addresses of blobs only, and using address in
memory when ROM is mapped
Change-Id: I053c55253eee00558071d15923e3eb17b1e8410c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/20474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
We recently changed all PACKED, __PACKED, __attribute__((packed)) ... to
__packed to gain some consistency. In cbfstool we use compiler.h to
provide that where necessary.
The cross compiler I use doesn't provide __packed by itself, but liblz4
doesn't compensate for that. Therefore include compiler.h, and to avoid
adding dependencies to non-liblz4 code, do so through the command line.
Change-Id: I581e45639ac3e103af7c16793e8effe2e632dec7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently, the what-jenkins-does target doesn't stop if abuild fails.
This change gives a command line parameter to abuild with tells it to
exit with a non-zero exit status if any of the builds failed.
This will be particularly useful for concourse which doesn't parse the
junit.xml files, and only knows whether a build passed or failed by the
exit status.
Change-Id: Ic2be5deaedacd3f55db8e0b14a2b7b39cc44664e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@google.com>
AFAIR from reviews, writing the PMIR (aka. ETR3) register never turned
out to do anything useful.
Change-Id: I119fb1212f360a59b695e2dfef68e19c330d01ca
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Sync map_oprom_vendev() and autoport with the list of PCI ids in the
`gma.c` driver, remove one obsolete Kconfig default override.
Change-Id: I12f24f415b695c516fbb947114e09c873af2e439
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
All affected boards did the same USE_NATIVE_RAMINIT distinction or
actually selected USE_NATIVE_RAMINIT. Also update autoport.
Change-Id: I924c43cec1e36e84db40e4b8e1dd0e05cad2b978
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20813
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The previous pre-commit script generates an error when a commit doesn't
actually generate a patch file. This happens in rare instances when the
only change in a patch is to update file permissions.
Update the pre-commit script to verify that there's actually a patch
before calling checkpatch. Also print that we're running checkpatch
so that it doesn't look like odd failures come from lint-stable.
Fixes Bug #132 - Problem with `lint-stable` when changing mode of file
Change-Id: I142610b6fc984b2b14fd6c634bc4e7f2880ba987
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add support for dumping Intel Software Guard Extension (SGX)
status. --sgx or -x is the command line switch to get SGX status.
The code iterates through all cores and reads MSRs to check if SGX is
supported, enabled and the feature is locked.
Change-Id: I1f5046c1f6703f5429c8717053ffe9c981cedf6f
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/20758
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The full path to the passed/failed build lists needs to be specified.
On the builders, the absolute path is passed in, which conflicted with
the ${TOP} value, causing this to fail on the builders. When TOP was
removed from the path, the builders worked correctly, but it failed when
run locally. This fixes the path in either case.
Change-Id: Ia4370f4a2b84991edccfc723a3136b88ca27db7d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This allows the paches to add cross-compile support for true x86 16-bit
GCC (ia16) to go in.
Change-Id: If9246b5fb2f3578afea601fd63b7d716ddf8597e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
A few pieces of coreboot code (like the video bios emulator) are
imported from other code bases, and hence might call printf. In
order to see the output, we redefine printf to printk. However,
when we are re-importing this code in a userspace utility, we might
call printk instead of printf if we're not careful.
A good fix for this would be to not call printf in coreboot ever.
As a short term fix to keep testbios from segfaulting, we just
don't call printf from printk, so we don't cause our own stack to
overflow.
Change-Id: I789075422dd8c5f8069d576fa7baf4176f6caf55
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This is sometimes set by packaging systems (eg Gentoo), so give it a
sane preset.
Change-Id: I651fad12128143e8ed5053e7e9871ea271bfc797
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The TARGET directory is independent of the TOP directory.
Change-Id: I1a8b92eaaea138548712726b09a1b083d235892e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
* Add check for '#if defined' as well as #ifdef
* Add check for IS_ENABLED() around bools in #if statements.
* Fix an incomplete comment.
Change-Id: I0787eab80ae64f59664fb53f395389bf5ac2a067
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Gentoo likes to use that variable for itself and insists on keeping it.
Meanwhile it doesn't seem to be set or used anywhere else in the gcc
build, and it seems there was a big $(P)-pruning going on in 2000,
so why is it even (still) there?
Related upstream change can be found at
https://gcc.gnu.org/ml/gcc-patches/2017-07/msg01015.html
Change-Id: I2c2bdf9cb215c489f760f43642a86592924e4e65
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For distros that package and version gnat independently from gcc (such
as Ubuntu), try to build with gnatgcc first.
This fixes the issue of gcc -print-prog-name=gnat1 failing because gcc
is of a different version.
Change-Id: Icec6d1fba8855e88ac91d47842dcb7f6b9d35461
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20517
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
buildgcc was copied to $DEST/share/buildgcc-$VERSION-, missing the
commit id description.
Change-Id: I83d2074b6466b0d99507845dc714a11ab2c58271
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20487
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's rather normal that a few bytes are skipped.
Change-Id: I9371afdbb3ad05de7645bfbf257e4f4bfa2feddb
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's irritating when adding tianocore payloads - those are not
ELF, but that's deliberate.
Change-Id: I76d9367b28545348f526e5f0b8216f9ff2a3d636
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Update checkpatch.pl to version 522b837
(checkpatch: warn when formats use %Z and suggest %z)
- This update moves the const_struct definitions into an external file.
coreboot will want to update this file, but for now I'm just pulling it
in directly from the linux tree.
- Update spelling.txt used by checkpatch.pl to version 505d308
(scripts/spelling.txt: add "overide" pattern and fix typo instances)
- Add better notes where things have been changed for coreboot to make
future merges easier.
Change-Id: I0ef067874fe7b1d23276a10e63858895d6083f69
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In the code we do the following in a number of places
to pre-initialize an array with a certain value before
overwriting some of the array with other values:
u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
[0 ... FCH_INT_TABLE_SIZE-1] = 0x1F,
}
clang does not like that behavior unless we specify
the option -Wno-initializer-overrides.
Remove the check for gcc in those places, too, because
1) it would silently change array contents between compilers
2) the check isn't sufficient to determine compilation on
clang vs gcc
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I93cc121b6fec099fcdbd5fd1114c2ff7cbc291dc
Reviewed-on: https://review.coreboot.org/20384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
clang complains that the access might be unaligned. Yes, we know. Yes,
that's exactly what we want. You have _one_ job.
Change-Id: I5400f50d8b5b462270c700f7ff90d9d517278e71
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/19659
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
That seems to be the more reliable way to build clang cross compilers
for now.
Change-Id: I14fe767d20f91b64e96c909291760bddcd108e5c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/19660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Excludes certain phrases which can't be changed.
- Checks last commit message if code is in a repo.
Change-Id: I6b52342488dacc56ef6083db5503507af35d41ac
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20032
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The word 'coreboot' should always be written in lowercase, even at the
start of a sentence.
Change-Id: I0a024d82d331c0794fe087e440b4e1924129a13c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Don't ask for bootstrapping in case of a different host GCC major
version. GCC's versioning scheme changed starting with the release
of GCC 5. There are no big changes between the versions any more.
Instead, show the message when the host GCC's version is below 4.
In case GNAT can't be found, ask the user to abort and install it.
Also give hints for Ubuntu where the package versions are a little
messy (e.g. the meta packages gcc and gnat often point to different
versions).
In case GNAT is found but is too old (< 4.9), enable bootstrapping
by default and tell the user that building will take longer.
In all three cases show a timeout to draw the user's attention.
v2: Update GNAT check to also look for `gnatbind`. It has to be
somewhere in $PATH.
Change-Id: I4d9de11d7469e137ede8ad138296d20c0f8ba78f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20332
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
"quit" is a signal name. The FreeBSD `sh` interprets
trap quit 1 2 3 15
as command to reset all the respective signal handlers, instead
of setting quit() as handler.
Change-Id: I69b813ab583f15a9dd89a115f7aea66d966f981b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20391
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Because of how blobtool works, we need different files for the 128 and
256 byte versions.
Change-Id: I9a3a532515eaeeb65ae05ce4f7a37c88500c6193
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
It assumes that __builtin_longjmp takes a void **, which is decidedly
distinctive from void *.
Change-Id: I1930bb01dd62bd6abf0688b118236db2a9299e40
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/20366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some environments (<grumble>cros_sdk</grumble>) provide gcc as $CC and
clang++ as $CXX. The latter needs the higher bracket-depth while the
former has no idea what it means, so tell CC and CXX individually.
Change-Id: I72b75fb9bb5df3a9b1561ee8821ec43ada29b24f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/20365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a Kconfig value to enable building libpayload with the 586 compiler.
Update the cross compiler script to add the Kconfig value name that is
used when libpayload builds.
The Quark SOC does not support some of the instructions generated with
the 686 compiler (e.g. CMOV). Success occurs when
payloads/libpayload/build/config.h indicates that
CONFIG_LP_USE_MARCH_586=1.
TEST=Build and run on Galileo Gen2.
Change-Id: I04907e9a38ee139bae2e8b227821f54614707c25
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/20322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Also check for the presence of the given commands or "gcc", "cc" in this
order if $CC is empty. To untangle the given compilers from boostrapped
ones, introduce hostcc() and hostcxx() functions that return the respec-
tive compilers to be used.
Change-Id: Ic947be53eec25331173ac82ed742017ca3fbf83c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Change from 'which' to 'command -v'. 'which' is not a posix command.
Change-Id: Icdf18e7e496447157554b8e61b1528f03456536d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20230
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
clang, like gcc, needs a compiler runtime library. Unlike gcc, it can
use either its own runtime library (compiler-rt), or gcc's version
(libgcc). Also unlike gcc, the version of clang that is currently part
of our reference toolchain does not provide the necessary versions of
compiler-rt for all platforms we support. Hence, for now, use libgcc
even on clang builds. This patch allows switching between the two, but
switching to compiler-rt will break clang builds, unless someone fixes
our reference toolchain to provide libclang_rt.builtins-${ARCH}.a for
each of our supported platforms.
Change-Id: I5001a4b62ed34df19312f980b927ced8cbaf07db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
That's what the option is called in the help text. Not
sure where the divergence came from, so let's fix it.
Change-Id: I621aa203da2d314b93de665dbdadbe4a43725375
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Drop Edward's cfe patch because it has been implemented by
upstream clang differently. Instead of
$ clang --print-librt-file-name
the right way to get ahold of the compiler-rt builtin library is
$ clang -rtlib=compiler-rt --print-libgcc-file-name
Change-Id: I8aac5256da5bfb6f7bebeff0959f16b53867c581
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Newer versions of clang will need newer versions of CMake (at least
3.4.3) to compile. This patch will enable us to switch to clang 4.0.
Change-Id: I6c91163ce0efd4eb2410cdb433de8be23d510ecd
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This might provide a minor speedup but more importantly it allows
skipping commits without Reviewed-on line (which we have a couple of
due to mistakes with git push).
To use, add a line starting with "Gerrit-Rebase-Ignore-CLs-Before:"
pointing out a match string (ie "something that comes after Reviewed-on")
prior to which no changes are considered on the originating branch. The
target branch is still fully considered to avoid issues with changes
that were retargetted out of order around the new cut and would then
make a reappearance (or be skipped).
Change-Id: I9f2679891e93f6d28a781315aebd2aa60a1e3b23
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Separate the required CPPFLAGS from environment overridable CFLAGS.
Change-Id: I0c1c0a1cebc7f7971634bf57d4a2370939c43fda
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
I had a stupid. :( Asterisks have a special meaning in regexes, but I
just wanted to match three literal ones. This kills the regex parser.
Change-Id: Ia6149e72715d651c914583ed3235680ce5b7a2e0
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/20171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Commit 7c634ae8 (msrtool: added support for Intel CPUs) adds `no-pic` to
the compiler flags.
GCC 7.0.1 20170316 fails to built with the error below.
```
/usr/bin/ld: msrtool.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: msrutils.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: sys.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: linux.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: freebsd.o: relocation R_X86_64_32S against `.data' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
```
Removing the flag causes the build to succeed with GCC 7, 6.3, and clang
4.0.
Change-Id: I3d7aed27ce7f84aa27305c68e2d5f14607c58ec8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/18907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
GCC version 7 is being a bit picky about pointer and integer comparison
by default, which triggers a crossgcc build error.
This backports a patch from upstream GCC to fix the issue.
Change-Id: I8b1e806c10604c0df080ac5edc667bf1141e2c17
Signed-off-by: Paul Kocialkowki <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/20103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Because the help block uses significant whitespace to determine whether
or not text is inside the help block, a mixture of spaces and tabs
confuses the parser.
If there's an unrecognized line, and the previous line was inside a help
block, it's likely that this line is too.
Additionally, this was found with a line that started ' configuration',
and threw a perl warning about an uninitialized value because the parser
thought this was the start of a new config line, but couldn't find the
symbol. Now we make sure that config statements have whitespace after
the 'config' statement.
Change-Id: I46375738a18903b266ea9fff3102a1a91235e609
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Turn the check for help text with no indentation from a warning to
an error.
- Show an error if the help text is at the same indentation level as
the 'help' keyword.
Change-Id: Ibf868c83e2a128ceb6c4d3da7f2cf7dc237054e6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Fix up commit 26174c97 (abuild: Build saved config files)
unintentionally adding a space before a tabulator.
Change-Id: Ic51dee6ed9d640335c2bde5bd5dfad3691c505e0
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
<https://coreboot.org> is redirected to <https://www.coreboot.org>.
```
$ curl -I https://coreboot.org
HTTP/1.1 301 Moved Permanently
Server: nginx/1.8.1
Date: Mon, 05 Jun 2017 10:41:33 GMT
Content-Type: text/html
Content-Length: 184
Connection: keep-alive
Location: https://www.coreboot.org/
```
So use the command below to use the final location to save a redirect.
```
$ git grep -l https://coreboot.org \
| xargs sed -i 's,https://coreboot.org,https://www.coreboot.org,g'
```
Change-Id: I4176c20ef31399f0063b41e3a0029cca0c1b0ff3
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20035
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The coreboot sites support HTTPS, and requests over HTTP with SSL are
also redirected. So use the more secure URLs, which also saves a
request most of the times, as nothing needs to be redirected.
Run the command below to replace all occurences.
```
$ git grep -l -E 'http://(www.|review.|)coreboot.org'
| xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g'
```
Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Device ID is read from HP Elitebook 2760p.
Based on:
- superio/smsc/kbc1100 (LDNs, keyboard, EC)
- DSDT from OEM firmware (COM1 and mailbox)
- Datasheet "KBC1122 Priliminary DS Rev. 0.8"
Change-Id: Id172ae42411a6d42a4ae7c7f30f96aeda3e6c384
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/18480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
GCC7 has a new feature called -Wimplicit-fallthrough enabled by
default which checks for fallthrough in switch statements which is a
common error. When a fallthrough is actually intended a comment saying
so will satisfy GCC.
Fixes cbfstool not building with GCC7.
Change-Id: I83252fc96be7ce0971d4251b0fc88fbbd7440e71
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
coreboot doesn't support CMOS options that are not byte aligned but
span multiple bytes. So treat them as error.
Change-Id: I2bcff62f153932e9c6646b4ce08e8da1c1532947
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18246
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Probably this was never tested as the return to no color "\033[0m"
was printed verbatim.
Change-Id: I7e6e1049b062ffb138ebdaeb62ddc49581ff8db1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The SATA device moved from 0:1f.2 to 0:17.0, 0:1f.2 became PMC. We
detect that by checking the PCI device class.
The ABAR MMIO space has grown to 2KiB and up to 8 ports are supported
now. For backwards compatibility, only dump port registers of ports
that are enabled in the Ports Implemented (PI) register.
Change-Id: I8e0f07d7359d92f689882b5afefa5ffb3766ee8b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have to call pci_free_dev() for each device we allocated with
pci_get_dev(). Since that's not the case for `sb`, we can close
this TODO.
Change-Id: I1ef80c837263a205467f835156dcb8fa667d3a8f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is supposed to fill the `size[]` array with the actual sizes of
a device' MMIO ranges, but apparently isn't implemented for every
access method in libpci (we let the library choose one). It tells us
by clearing `PCI_FILL_SIZES` in the return value of `pci_fill_info()`
(which we don't check). Since we don't ever use `size`, we can just
make it clear and don't ask for it.
Change-Id: I3fb9334472f1c7563a9e17910190f73affbe067a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem
messages to the 'CONSOLE' area in FMAP which allows us to grab the
log when we read the flash.
This is useful when you don't have usb debugging, and
UART lines are hard to find. Since a failure to boot would
require a hardware flasher anyways, we can get the log
at the same time.
This feature should only be used when no alternative is
found and only when we can't boot the system, because
excessive writes to the flash is not recommended.
This has been tested on purism/librem13 v2 and librem 15 v3 which
run Intel Skylake hardware. It has not been tested on other archs
or with a driver other than the fast_spi.
Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
In get_region, ifdtool assigns a not-known-to-be-aligned
pointer to a uint32_t *. Now you know and I know that it is
almost certainly aligned, but clang on OSX doesn't like this,
and it's a dicey thing to do in any event, just waiting
to hit someone hard at some future date.
Assign the pointer to a void * and use memmove to copy
the value to a uint32_t.
This usage is more portable to all little-endian architectures,
now, but is still not endian-safe. I doubt we'll ever care.
Change-Id: Ifb2f260c3363ab0f5b4a59e5a4e0b5ecf049fa96
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/19921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This should allow Jenkins to parse the build failures when Kconfig
generates an error.
Change-Id: I5f9083c346ac7b6502f854b7e1f1054e81954d76
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Not all systems have sizeof(time_t) == sizeof(long), so
cast the delta here to a long to match the %ld format.
Change-Id: If235577fc35454ddb15043c5a543f614b6f16a9e
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Reviewed-on: https://review.coreboot.org/19902
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change-Id: Iac4cdb003b2fe967b303c1f8e0eeb61673a02858
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/19930
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Patrick Georgi <pgeorgi@google.com>
hugo has no need to write there, it should only write to the
output directory.
Change-Id: Ie320f5017feccfa2e9ecba3c802e040487b44d67
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/19929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
www.coreboot.org/Documentation is now built with hugo (www.gohugo.io)
based on files in this repo's /Documentation directory.
Also clarify that new additions to Documentation are under CC-BY 4.0 terms.
Change-Id: I000e15b29a182bb88b40de3d0178bf8cc54ba8af
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/19881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The 'cbmem -1' flag that cuts off console output before the last boot
will ignore content from earlier stages if it was truncated due to lack
of pre-CBMEM console space. This patch makes the "log truncated" message
more specific and adds it as an additional cut-off marker to 'cbmem -1'
to counteract that problem.
Also raise the log level of the coreboot banner one step to BIOS_NOTICE
to make it more likely to be included in the output for 'cbmem -1' to
find. (I believe NOTICE is reasonable but I wouldn't want to go as far
as WARN which should be reserved for actual problems. Of course this is
not ideal, but then again, our whole log-level system really isn't... it
would be better if we could make it always print a banner to the CBMEM
console without affecting the UART at the same time, but that would
require a larger amount of work.)
Change-Id: I58288593dfa757e14f4a9da4ffa7e27b0b66feb9
Reported-by: https://ticket.coreboot.org/issues/117
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Put parameter comments and help text in the same order as the actual
parameters.
- Don't clone a new release tree from coreboot.org if a tree already
exists.
- Change COMMIT_ID parameter from optional to required. If it was
omitted previously, the head of the master branch would be used.
Change-Id: Ifa434a4911dec777004788e3cf4e3436875d929b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The former only exists with a custom patch while the latter is supported
by clang and in the absense of libgcc even points to clang's own runtime
libraries.
Change-Id: I1e30d5518cf78e1d66925d6f2ccada60a43bb4f8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/19658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
There is code to adjust the mapping down if a mmap fails
at a physical address. However, if the address is less
than the page size of the system then the physical offset will
underflow. This can actually cause a kernel panic on when
operating on /dev/mem.
The failing condition happens when the requested mapping at 0
fails in the kernel. The fallback path is taken and page size
is subtracted from 0 making a very large offset. The PAT code
in the kernel fails with a BUG_ON in reserve_memtype() checking
start >= end. The kernel needs to be fixed as well, but this
fallback path is wrong as well.
BUG=b:38211793
Change-Id: I32b0c15b2f1aa43fc57656d5d2d5f0e4e90e94ef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There are no GCC warnings anymore about set but unused variables, and
Clang warns about this switch, as it doesn’t know it.
So remove the switch to use the default set by the switch `Wall`.
Change-Id: Ie9eb26d4f8b298af231b952b547b71d68c649eaf
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/19613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Only commented out code uses the variable `csr`, and GCC complains about
it, when enabling the warning *unused-but-set-variable*.
```
Checking for pciutils and zlib... me.c: In function ‘mei_dump’:
me.c:50:18: warning: variable ‘csr’ set but not used [-Wunused-but-set-variable]
struct mei_csr *csr;
^~~
```
As the code is commented, also comment out the declaration of the variable.
Change-Id: I4ecb2b5e9f32906ccfc8a0628d2e0f2d3ad39a02
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/19612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On Ubuntu 16.04 the libpci-dev package is required.
Change-Id: I942b3e96f5b8112166a105eb5a61f8f3cf16cb7c
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Reviewed-on: https://review.coreboot.org/19617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Use `uintptr_t` instead of `uint32_t`, fixing the error below on 64-bit
systems, where pointers are 64-bit wide.
```
cc -O0 -g -Wall -W -Wno-unused-parameter -Wno-unused-but-set-variable -Wno-sign-compare -Wno-unused-function -c -o intelmetool.o intelmetool.c
intelmetool.c: In function ‘dump_me_memory’:
intelmetool.c:85:45: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
dump = map_physical_exact((off_t)me_clone, (void *)me_clone, 0x2000000);
^
```
BUG=https://ticket.coreboot.org/issues/111
Change-Id: Id8d778e97090668ad9308a82b44c6b2b599fd6c3
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/19567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Wise (Debian) <pabs@debian.org>
NR indicates the last non empty region, which in this case is
GbE (region3). Needed for flashrom ifd layout support.
Change-Id: I3f4dcb0d41718dd176982679f8e045681fd3f486
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This fixes a memory leak in the activate_me() function.
Change-Id: I011b2f96122d8f88aed121352afe3f0d41edef60
Signed-off-by: Paul Wise <pabs3@bonedaddy.net>
Reviewed-on: https://review.coreboot.org/19561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
These are more human readable for folks not familiar with errno values.
Change-Id: I21352a00b583163472ccd3302a83adf1f8396c61
Signed-off-by: Paul Wise <pabs3@bonedaddy.net>
Reviewed-on: https://review.coreboot.org/19560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This adds one of the Xeon labeled PCI IDs used in Sandy-/Ivy Bridge
generation processors. This ID is used by the non-Xeon i7 3770K.
Change-Id: Iad7745136efeb10ff745001413f4ccb6488b5ec0
Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/19516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Even though the persistent CBMEM console is obviously awesome, there may
be cases where we only want to look at console output from the last boot.
It's easy to tell where one boot ends and another begins from the banner
message that coreboot prints at the start of every stage, but in order
to make it easier to find that point (especially for external tools),
let's put that functionality straight into the cbmem utility with a new
command line flag. Use the POSIX/libc regular expression API to find the
banner string for maximum compatilibity, even though it's kinda icky.
Change-Id: Ic17383507a884d84de9a2a880380cb15b25708a1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19497
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
The AFC—Additional Flash Control Register is set by
southbridge code.
Remove redundant calls and get rid of it in autoport.
Change-Id: I627082e09dd055e3b3c4dd8e0b90965a9fcb4342
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19493
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
The Wildcat Point-LP Premium is handled the same as the Wildcat Point-LP,
but it wasn't supported by inteltool.
Change-Id: I694514e1963f074582a3f5f81d63c20e7fa49189
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19445
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Lint prevents my next commit which adds a new line to the table
so it's better to break all the > 80 character lines so it will be
consistent with the new line I'm about to add.
Change-Id: Ic7ad0cb90e861cd830db1186225d4f839250792a
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19444
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Ironically enough, libsanitizer is notorious for creating "uninitialized
variable" warnings with different compiler versions than the one it's
shipping with.
Since we don't need it for building the real compiler, just skip it.
Fixes building our compilers using the gnat-gpl 2014 compilers.
Change-Id: I2130dfdf3eaf07d77cd70777419fc0ae4642b843
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/19478
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Move the images around in the image stitching. This addresses
an issue found with PSP firmware loading on the Google Kahlee
mainboard.
Note firmware1 must come before firmware2 in the image or
the PSP will not allow APU to execute.
Change-Id: I85963fa93d6efd707cedfbc04b92d302ad5de3b1
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19170
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We need to rewrite libtool's files (foo.la) a couple of times so it
knows where to look
(while still whining that $DESTDIR$TARGET != $TARGET. well, duh.)
Change-Id: I54cafd47c76d855222ba905b5eb4533a23bdfd34
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/19463
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
According to the comment above the default should dump the EC ram,
though is never reached since the variable 'write_addr' is not 0, but
initialized at -1.
Also removes brackets around one line statement below if to make
checkpatch.pl happy.
Change-Id: I390996b253f2f20682cd9ab2d4f560de6eccfc57
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19152
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
When setting output to verbose, it incorrectly reports that it times
out on every command.
TESTED on Thinkpad X60.
Change-Id: I24f05f0c165462d5ba2604c7e2fe139400683275
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19151
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The devicetree data structures have been available in more than just
ramstage and romstage. In order to provide clearer and consistent
semantics two new macros are provided:
1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE
2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST
The ROMSTAGE_CONST attribute is used in the source code to mark
the devicetree data structures as const in early stages even though
it's not just romstage. Therefore, rename the attribute to
DEVTREE_CONST as that's the actual usage. The only place where the
usage was not devicetree related is console_loglevel, but the same
name was used for consistency. Any stage that is not ramstage has
the const C attribute applied when DEVTREE_CONST is used.
Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19333
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This brings in 2 new commits from the upstream cbootimage
repository, merged to the upstream tree April 12, 2016 and
July 28, 2016
64045f9 bct_dump: don't crash on devices without RSA support
ea1e03d sign.sh: Add more features
Change-Id: I3b6c0c2c855044d7fce87eff9954bce5035ca966
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18955
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Ib95a7c9c64c481af7dcf1074ffc0fc76dc6b6ff9
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19144
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MMA blobs internal version 2.1018 adds more tests.
This patch updates the script to accommodate that
change. MMA blobs are part of chrome private
repository.
Change-Id: Iff660fdfdfcd7acc3820c5550740276be6213877
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/19259
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Refactor the spec & setter file reads into a separate function.
- Make sure files can actually be opened before reading from them.
- Check all malloced variables.
- Set functions with no declatations as static.
- Update blobtool.tab.c_shipped to the latest version.
Change-Id: Ie97fff84493a06f48d8673d388c3882028d048ca
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Rewrite STRING and COMMENT expressions to remove need for CHARS.
- Clean up regular expressions - get rid of unnecessary expressions.
- Remove extra newline from the end of the file.
- Clean up stripquotes() function
-- Remove unnecessary backslashes in '\"'
-- Check malloc for failure
-- Remove unnecessary assignment of 0 to the end of the new string,
snprintf will take care of it.
- Update blobtool.lex.c_shipped to the new version.
Change-Id: I002962cfae0816ed3c7a5811dfb1b8b48fdc5729
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19230
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch allows the CBMEM console to persist across reboots, which
should greatly help post factum debugging of issues involving multiple
reboots. In order to prevent the console from filling up, it will
instead operate as a ring buffer that continues to evict the oldest
lines once full. (This means that if even a single boot doesn't fit into
the buffer, we will now drop the oldest lines whereas previous code
would've dropped the newest lines instead.)
The console control structure is modified in a sorta
backwards-compatible way, so that new readers can continue to work with
old console buffers and vice versa. When an old reader reads a new
buffer that has already once overflowed (i.e. is operating in true ring
buffer mode) it will print lines out of order, but it will at least
still print out the whole console content and not do any illegal memory
accesses (assuming it correctly implemented cursor overflow as it was
already possible before this patch).
BUG=chromium:651966
TEST=Rebooted and confirmed output repeatedly on a Kevin and a Falco.
Also confirmed correct behavior across suspend/resume for the latter.
Change-Id: Ifcbf59d58e1ad20995b98d111c4647281fbb45ff
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
blobtool uses the same sort of update mechanism for the .l & .y files,
so update the SCONFIG_GENPARSER Kconfig question to encompass both
utilities.
- Change the name to UTIL_GENPARSER, and update the help text.
- Update sconfig's makefile.
- Add the check to blobtool's makefile.
- Update the makefiles to check for y, not defined.
Change-Id: I6215791c9a019bce37d4a150b65d1fdbb9073156
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a Makefile.inc, based on sconfig's, to use the _shipped variants
so that the build doesn't have to generate them with flex & bison.
The GENPARSER check is inactive, and will be updated in the next
commit.
Add the c_shipped & h_shipped files for the current .l & .y files.
Change-Id: Ia6c68bfb6e0611ceb6bc76cc66e43266bafc98ad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19228
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On some architectures (like AArch64), /dev/mem mappings outside of the
area marked as normal RAM use a memory type that does not support
unaligned accesses. The libc memcpy() implementation on these
architectures may not know or expect that and make an unaligned access
for certain source/dest/length alignments. Add a custom memcpy()
implementation that takes these restrictions into account and use it
anywhere we copy straight out of /dev/mem memory.
Change-Id: I03eece380a14a69d4be3805ed72fba640f6f7d9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18300
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
pci_lookup_name might return NULL from using format_name internally
which could cause a crash when trying to print that value. We
check for NULL and print a more appropriate value in that case.
Change-Id: I499f0b5e1681f3926df0d8a325aab2c666ebd632
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19089
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Update ABUILD_VERSION for the timeless & checksum parameters.
Change-Id: I96b4c027ccf3e5563dbf4598a0d1fb5e83a5985a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19034
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add --checksum command line parameter to specify a base path and
filename for the checksums to be saved into.
- Save checksums of each platform into the specified file appended
with "_platform"
- Save a sha256 checksum of the sorted config.h into the base file
appended with "_config"
Change-Id: Id24dc4b10afbd35cdb8750f75b934419e6e80290
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19033
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add some variables to allow server customizations.
- Verify that coreboot images and containers exist before trying to
remove them.
- Add a couple of convenience targets: clean & cleanall to remove
coreboot containers and images or ALL containers and images.
- Add docker-what-jenkins-does target to run a test build locally inside
a docker image.
- Add docker-jenkins-server target to test the server configuration and
run the jenkins docker image.
- Add docker-jenkins-shell and docker-shell targets to run the
coreboot-sdk and coreboot-jenkins-server images.
- Update the help.
Change-Id: I1896f33e7eddfe3248f44ae780de65ce50d5dd99
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
pci_me_interface_scan was returning (via argument 'name') a pointer
to the interface name which was stored in a stack variable. This
caused part of the name to be printed as garbage stack data in some
situations if stack data was overwritten.
This moves the name buffer to the calling function so it can be accessed
before it gets overwritten.
Change-Id: I947a4c794ee37fe87e035593eaabcaf963b9875e
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19066
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
- Fix clean target to pass if output doesn't exist
- Make sure $(RM) is actually defined
Change-Id: Ibcdb0e329084f58b27c3f53213a237d02c922a51
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18998
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The Stoney Ridge program has OPNs that are considered fanless. These
APUs are strapped to search for unique SMU firmware, indicated by
Type[8]=1 in the directory table entry.
Add new options to amdfwtool and include the blobs in the build with
the appropriate bit set in the Type encoding.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 8df0d6847c39bb021271983018ac6f448f9ff9da)
Change-Id: I4b80ccf8fd9644f9a9d300e6c67aed9834a2c7a7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18991
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This fix changes the $cmdline variable that is used for recursive
parallel abuild invocations through xargs from a string to a true bash
array (like $@). This allows bash to properly preserve and pass on
whitespace in parameters, like you get from invocations such as:
util/abuild/abuild -c 32 -t "MY_FIRST_BOARD MY_SECOND_BOARD"
Also add a mechanism to better spread CPUs across targets, since
otherwise we can leave a lot of CPUs idle if we're trying to build only
a few boards in parallel.
Change-Id: I76a1c6456ef8ab21286fdc1636d659a3b76bc5d7
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18975
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Kconfig shows a warning about this, but we want to catch it earlier
and halt the build.
Change-Id: I0acce1d40a6ca2b212c638bdb1ec65de5bd4d726
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18970
Tested-by: build bot (Jenkins)
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Update the dockerfile which generates the base docker image for the
coreboot builders to include gnat. This matches the changes made in
the crossgcc/Dockerfile in commit 6b28fff0b (crossgcc/Dockerfile: Add
gnat to build the Ada toolchain).
- Remove the -b from the toolchain build command line. This doesn't
seem to be needed.
Change-Id: I26d4dca5805f57cab50065cf1c25164b909a0b3d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18961
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
If gnat is installed, buildgcc automatically enables Ada support.
Instead of the general `gnat` package we install `gnat-6` which saves
us about 80 MiB of downloads of unused "dependencies".
Change-Id: Ie0b8564d016d458cd33ff75a2ee7bbd5de33afe2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18772
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Compiling the GNAT frontend of GCC seems to have stabilized since GCC
4.9.0. So build it by default if GNAT >= 4.9 is installed.
TEST=Bootstrapped all GCC versions from 4.9.0 to 6.2 and built the
i386 cross toolchain with each.
Change-Id: I9d1127595dc6b9bcece9c5e5cc7e45f467744ab9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18777
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We were looking for the wrong file for some time. With bootstrapping
enabled, this resulted in a spurious message about the host GCC being
already built.
Change-Id: Ieb52c5925ea5615c83311319f22693b72f4987f9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18776
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Default values taken from the datasheet and from the dump of
an uninitialized F71808A on a Sapphire Pure Platinum H61.
Both the control registers and the HWM configuration registers
are added.
Change-Id: Ia6e2a7c13a5086d19ebdb426f2f975b43220a273
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18562
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Without this change, error "Unknown descriptor version: 4" will be
returned if this frequency is selected (seen on GLKRVP)
Change-Id: Ib5bfb996b85c7245d8f9c70988bfd5bbac882d74
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/18688
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The __attribute__((weak)) lines on structs were being read as functions,
causing a warning that the brace should be on the next line.
Add a check to see if it's a struct with an attribute, and ignore it for
the OPEN_BRACE check if it is.
Change-Id: Ieb0c96027e8df842f60ca7c9de7aac941eed1dc2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18570
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
checkpatch: add option for excluding directories
when importing code from external sources
Using --exclude <dir> we should be able to exclude a list of well
defined locations in the tree that carry sources from other projects
with other styles.
This comes from the 01org/zephyr project in github:
Original-Change-Id: I7d321e85eed6bc37d5c6879ae88e21d20028a433
Original-Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Icc9e841e7d84026d6ab857ff90b0f093515ccaad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18568
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
This adds support for the Wildcat Point LP for intelmetool.
When the tool detected a Wildcat Point LP,
then the ME will be reported as difficult-to-remove.
Change-Id: I35423db11cdc1e21e7f02ce90dace7fb4d236c45
Signed-off-by: Huan Truong <htruong@tnhh.net>
Reviewed-on: https://review.coreboot.org/18575
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The intel ME checker tool would segfault if it reaches the end of
the loop without having the dev pointer set. This happens when
it gets to the end of the previous loop without knowing what to do
with any of the devices it sees.
This patch makes sure the pointer is not NULL before accessing it.
Change-Id: Ia13191799d7e00185947f9df5188cb2666c43e2a
Signed-off-by: Huan Truong <htruong@tnhh.net>
Reviewed-on: https://review.coreboot.org/18573
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This was removed from the previous version, but we'd like it in
a separate patch, so it's obvious and can easily be applied to the
next version.
Change-Id: I9396009e82e762aa0cc037dbe9e7133962af6354
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18577
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is version 03aed21 from linux/scripts, updated on Dec 12, 2016.
The version needs to be updated because Perl version 5.20 deprecated the
/C regex expression. Perl version 5.24 removed it completely, so the
old version fails to run on the coreboot builders.
Change-Id: Ib97997237ca64c65d7f91d568ae4bec000804331
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18571
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
All files:
- Previously, various things were hardcoded into the docker containers
that made it necessary to update the Dockerfile files for each new
version of the sdk. Turn those into 'Variables" that are updated during
the build step. Because the makefile is piping the dockerfile through
the sed command and back into the docker build command, the normal
docker "COPY" keyword doesn't work.
coreboot-jenkins-node changes:
- Run ssh-keygen -A to explicitly generate the ssh keys. This fixes an
error: Could not load host key: /etc/ssh/ssh_host_dsa_key
coreboot-sdk changes:
- Remove apt-get upgrade command - The Dockerfile guide recommends
not to run this.
- Change libssl-dev to libssl1.0-dev. libssl-dev's header files won't
build the Chrome-EC codebase.
- Add libisl-dev, needed to build the riscv toolchain.
- Build the toolchain using the -b option
- Add environment variables containing the version and commit that the
coreboot-sdk was built from.
Makefile:
- Update targets to use the version and commit variables
Change-Id: I2c1376fe4b791da2a62fca11bc92c4774cbef1c8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18001
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
- GCC gets updated from 5.2.0 to 6.3.0:
gcc-6.3.0_riscv.patch is a diff between 5fcb8c4 and 173684b in
riscv-gcc, and it needs gcc-6.3.0_memmodel.patch.
- Binutils goes from 2.26.1 to 2.28:
There is a build error for MIPS gold so I add patch for it.
- GMP gets a bump from 6.1.0 to 6.1.2
- MPFR is updated from 3.1.4 to 3.1.5
- GDB is upgraded from 6.1.1 to 6.1.2
- IASL is changed from 20160831 to 20161222
- LLVM is changed from 3.8.0 to 3.9.1
Change-Id: I20fea838d798c430d8c4d2cc6b07614d967c60c5
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17189
Tested-by: build bot (Jenkins)
Relevant changes (commit 250b2ec):
* Fix a bug for ME6 Ignition images.
* Fix signature checking for ME11 and later.
* Add command line arguments.
* Add an option to relocate the FTPR partition to the top of the
ME region, recovering most of the ME region space.
* Print the image minimum size.
* Add write boundary checks, to prevent writes on other regions
in case of bugs.
The new changes have been tested on multiple platforms by the
me_cleaner users. They have been tested also on the author's
X220T with coreboot, where the ME region has been shrinked up to
84 kB without any issue.
Change-Id: I3bd6b4cba9f5eebc3cd4892dd9f188744a06c42b
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18473
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
It explains the prerequisites to run the script, some
background on how to setup the computer running the script,
and the board it gathers the information from.
That information is too long to fit inside the script's
help.
Change-Id: Iecba7310ff1583149c02728e955716775bcbbdc4
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/6660
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This company doesn't do custom hardware anymore and doesn't
host the sources anymore. We therefore point to the archived
sources instead.
Change-Id: I5ce4f6a468b852fc1d0947fe2b28a5297f14c437
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/11889
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins)
Update sconfig lex and yacc files to add support for a new "SPI" device
type in the devicetree. SPI device takes only parameter i.e. chip select
number for the device on the SPI bus.
Re-generate the shipped files for sconfig using flex 2.6.0 and bison
3.0.4 (make CONFIG_SCONFIG_GENPARSER=1). Clean up local paths that leak
into generated files.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: If0831e25b3e4ed87827ad92356d7bf47b6387884
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18339
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Given a specification of bitfields defined e.g. as follows:
specfile:
{
"field1" : 8,
"field2" : 4,
"field3" : 4
}
and a set of values for setting defaults:
setterfile:
{
"field1" = 0xff,
"field2" = 0xf,
"field3" = 0xf
}
You can generate a binary packed blob as follows:
./blobtool specfile setterfile binaryoutput
binaryoutput: ff ff
The reverse is also possible, i.e. you can regenerate the setter:
./blobtool -d specfile binaryoutput setterorig
setterorig:
# AUTOGENERATED SETTER BY BLOBTOOL
{
"field1" = 0xff,
"field2" = 0xf,
"field3" = 0xf
}
This tool comes with spec/set files for X200 flash descriptor
and ICH9M GbE region, and can be extended or used to decompile
other data blobs with known specs.
Change-Id: I744d6b421003feb4fc460133603af7e6bd80b1d6
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/17445
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
With coreboot 4.4 switched to "Descriptor mode" for Lenovo T500
it automatically unlocks all flash regions. For Gbe region
the "Requester ID" was hardcoded resulting in *dead* Gbe.
Keep board specific "Requester ID" while unlocking Gbe region.
Allows Lenovo T500 to boot with IFD "Descriptor mode" with unlocked
flash regions.
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Change-Id: Ia4b5d1928e84bee42182fc83020e3a13fadc93c4
Reviewed-on: https://review.coreboot.org/18055
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Adds checks for OpenBSD in all the places that were already checking for
NetBSD. This fixes e.g.:
ec.c:21:20: error: sys/io.h: No such file or directory
which was caused by defaulting to Linux.
Also, OpenBSD calls its amd64 iopl amd64_iopl instead of x86_64_iopl.
This change just defines iopl appropriately depending on the
OS and architecture.
TEST=Build on OpenBSD 6.0 or -current from 2017-01-25.
Change-Id: If6d92a9850c15cd9f8e287cc4f963d3ff881f72c
Signed-off-by: Steven Dee <i@wholezero.org>
Reviewed-on: https://review.coreboot.org/18260
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Speed up the execution of this script from ~6 seconds to ~1 on my
system.
There are some changes to its output, but they're actually _more_
correct: so far, architectures without compiler support kept compiler
options for architectures that ran successfully earlier.
Change-Id: I0532ea2178fbedb114a75cfd5ba39301e534e742
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18262
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This fixes the build for the generated code for boards with PS/2
keyboard, since commit 448e386309 updated the pc_keyboard_init()
function.
Change-Id: I776b49b847985296eaca4af6d6e49ab5d6abbafe
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/18242
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Intel Core 2 is not further specified since not all chipsets support
quad cores, which could confuse users.
Change-Id: I86c0a41743fe784f432347fa639d3c26604e058e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18235
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Use dashes instead of underscores for consistency and to match other
coreboot targets
- Fix a couple of places where old target names were referenced
- Remove double 'help' target from .PHONEY target list
Change-Id: I3b464ebf74653a8cc880e982316fd883757ec728
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18000
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Kill running docker containers before trying to remove images or
containers.
Change-Id: Id2de90edbe5d0dc6ecb906be7101ad9744dbd11e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/17999
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Fix TODO: restrict $1 to allowed values.
- Specifically exclude 'oem' board status directories.
- Exclude any directory that doesn't follow the date format to keep
the script from breaking again in the future if something it doesn't
recognize is pushed. Just ignore it for the wiki.
- Fix shellcheck warnings.
Change-Id: I2864f09f5f1b1f5ec626d06e4849830400ef5814
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18225
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
me_cleaner is a tool to strip down Intel ME/TXE images by removing all
the non-fundamental code, while keeping the ME/TXE image valid and
suitable for booting the system. The remaining code (ROMP and BUP
modules) is the one responsible for the very basic initialization of
the ME/TXE subsystem and can't be removed.
This tool exploits the fact that:
* Each ME/TXE partition is signed individually and it is possible to
remove both the partition and the signature.
* The ME/TXE modules are not signed directly, instead they are hashed
and the list of their hashes is hashed again and signed: this
means that modifying a module doesn't invalidate the signature,
but only the hash of that single module.
* The modules hashes are checked only when the corresponding module
needs to be executed.
* The system can boot after the execution of the first module (BUP,
inside the FTPR partition), even if the subsequent stages fail.
Currently me_cleaner works on every Intel platform with Intel ME or
Intel TXE with the following limitations:
* Doesn't work when Intel Boot Guard is set in Verified Boot mode.
* Doesn't fully work on Nehalem yet.
* On Skylake and later generations, since the partitions' internal
structure has changed, me_cleaner leaves intact the FTPR
partition, removing all the the other partitions.
This tool has been tested on multiple platforms and architectures by
different users, and seems to be stable. The reports are available
here:
https://github.com/corna/me_cleaner/issues/3
A more in-depth description of me_cleaner is available here:
https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F
Change-Id: I9013799e9adea0dea0775b9afe718de5fc4ca748
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18203
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If compression failed, just store the uncompressed data, which is what
cbfstool does as well.
Change-Id: I67f51982b332d6ec1bea7c9ba179024fc5344743
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18201
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
When the ME is hidden (most likely because it was disabled), it cannot
be found until activate_me() is called.
Change-Id: Ie1f65f61eb131577d7254af582e2709660f4da27
Signed-off-by: Dan Elkouby <streetwalrus@codewalr.us>
Reviewed-on: https://review.coreboot.org/18149
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's a BSD function, also, we missed to include `endian.h`.
Just including `endian.h` doesn't fix the problem for everyone.
Instead of digging deeper, just use our own endian-conversion from
`commonlib`.
Change-Id: Ia781b2258cafb0bcbe8408752a133cd28a888786
Reported-by: Werner Zeh <werner.zeh@siemens.com>
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18157
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The script now automatically discovers the original branch (if known)
and configures itself appropriately.
Additionally, commit messages for changes coming _from_ upstream will
be prefixed with "UPSTREAM: ".
With the optional --cros argument, it also adds a BUG/BRANCH/TEST block
at the right place in the commit message (right above the metadata) if
one doesn't already exist.
Change-Id: I81864ddca62fd99a9eb905d7075e5b53f58c4eb5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18135
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
cbfstool ... add ... -c precompression assumes the input file to be
created by cbfs-compression-tool's compress command and uses that to add
the file with correct metadata.
When adding the locale_*.bin files to Chrome OS images, this provides a
nice speedup (since we can parallelize the precompression and avoid
compressing everything twice) while creating a bit-identical file.
Change-Id: Iadd106672c505909528b55e2cd43c914b95b6c6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18102
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
cbfs-compression-tool provides a way to benchmark the compression
algorithms as used by cbfstool (and coreboot) and allows to
pre-compress data for later consumption by cbfstool (once it supports
the format).
For an impression, the benchmark's results on my machine:
measuring 'none'
compressing 10485760 bytes to 10485760 took 0 seconds
measuring 'LZMA'
compressing 10485760 bytes to 1736 took 2 seconds
measuring 'LZ4'
compressing 10485760 bytes to 41880 took 0 seconds
And a possible use for external compression, parallel and non-parallel
(60MB in 53 files compressed to 650KB on a machine with 40 threads):
$ time (ls -1 *.* |xargs -n 1 -P $(nproc) -I '{}' cbfs-compression-tool compress '{}' out/'{}' LZMA)
real 0m0.786s
user 0m11.440s
sys 0m0.044s
$ time (ls -1 *.* |xargs -n 1 -P 1 -I '{}' cbfs-compression-tool compress '{}' out/'{}' LZMA)
real 0m10.444s
user 0m10.280s
sys 0m0.064s
Change-Id: I40be087e85d09a895b1ed277270350ab65a4d6d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18099
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This speeds up the lzma encoder approximately four-fold.
Change-Id: Ibf896098799693ddd0f8a6c74bda2e518ecea869
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There are systems that come with curl but not wget (eg macOS) and they
now have to install one less additional dependency.
Also fix some cosmetic issues in console output and require valid
certificates on https downloads.
Change-Id: Idc2ce892fbb6629aebfe1ae2a95dcef4d5d93aca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18048
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When running abuild outside of jenkins, because all of the builds are
printed intermixed, it's easy to miss when a board has failed the build
by looking at the output. This saves a list of failed builds and prints
the list at the end of the run.
- Add a command line option to mark when abuild is being called
recursively.
- Add all failed builds to a list.
- Print the list when a non-recursive abuild run exits.
Change-Id: Icb40ed8083a57bbcde49297d2b0814f98dcbb6c8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17890
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Variable name of inteltoolArgs was fixed.
The way of passing arguments to inteltool was changed from "-a -f"
to "-af" which is better as the string seems to be parsed
as a single argument.
Change-Id: I0c48fb1e912261748ba9e2b91c291bac28b9e856
Signed-off-by: Sebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com>
Reviewed-on: https://review.coreboot.org/18050
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Gerrit will let you push a patch without a signed-off-by line,
although I believe it can't actually be merged. Instead of catching
it either manually, or when the patch is attempting to be merged,
catch this in the jenkins builder.
Change-Id: I80161befa157266dd4e3209839a06ff398aab6bb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17941
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
That's undefined behavior in C
Change-Id: I671ed8abf02e57a7cc993d1a85354e905f51717d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1229557
Reviewed-on: https://review.coreboot.org/18014
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This allows the make jenkins-build-toolchain to use the
BUILDGCC_OPTIONS variable. Previously, the options were hardcoded.
Change-Id: I5f4c1d3fc8c714ec3640356ae3c86ae157f486d2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17766
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
If we use ccache we have to interpret spaces in $CC as separation
characters. The downside is that we can't support spaces in the
compiler's path. But, well...
Change-Id: I4e6e6324389354669a755f570083a40ff00b1bbf
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18018
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
argv is only filled for macro->argc > 0.
Change-Id: I5ff21098384afc823efa14be3d5565507fb2b3b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287089
Reviewed-on: https://review.coreboot.org/18016
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
closure_type is copied then never used again. Close that leak.
Change-Id: Idd4201f7fc6495fde5ad2e1feb7e499e38986e92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287073
Reviewed-on: https://review.coreboot.org/18015
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Without this change inteltool cannot read BIOS_CNTL values nor can it
read the SPIBAR values.
Change-Id: I9ff16e060aca66e3cb11c8315a6843ccecd1d3c2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17979
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The ICH7 SPIBAR offset and registers are different from later
generation.
ICH8 has a different offset from later generation.
ICH6 has no SPI controller.
Change-Id: I7691bce619089b15805114047bcb1fd121a5722b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17978
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's usually not too interesting, so hide it behind -v.
Change-Id: Icffb5ea4d70300ab06dfa0c9134d265433260368
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17899
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On a 32-bit system, pointers are 32-bit wide, and not 64-bit, resulting
in the warning below.
```
mmap.c: In function ‘map_physical_exact’:
mmap.c:26:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
virt_addr = mmap((void*)mapto, len, PROT_WRITE | PROT_READ,
^
```
Fix this by using compatible types.
Change-Id: I4ede26127efcbd5668b978e6880a0535607e373d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17970
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
CXXFLAGS seems to be used a lot and have to be specified independently
from CFLAGS.
Change-Id: Iff4c76e54a46e908299b532fd848165a3dc04d43
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17937
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
GCC 6 can optionally default to building all binaries as position
independent executables (PIE). This breaks linking against static
libraries that are compiled without position independent code (PIC).
Building GMP `--with-pic` in this case seems to be the least fragile
solution.
TEST=Run `make all` and `make BUILDGCC_OPTIONS=-b build-i386` in
util/crossgcc on Debian Stretch.
Change-Id: I5f3185af9c8d599379a628e18724b217b88be974
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17936
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
The earlier loop exits gracefully iff i == index. In other cases, member
might be NULL, so check that the scan was successful before using its
results.
Change-Id: I818c233d797d82fa819243c4626dd9c4b7de3ac6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1129147
Reviewed-on: https://review.coreboot.org/17887
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's later tested for NULL, but never initialized to make that test work
reliably.
Change-Id: Iadee1af224507a6dd39956306f3eafa687895176
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323515
Reviewed-on: https://review.coreboot.org/17880
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
filebuffer is treated like a string, so it should be zero-terminated
like a string.
Change-Id: I078aa39906394be64023424731fe0c7ae2019899
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1323473
Reviewed-on: https://review.coreboot.org/17878
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
To make the generated descriptor compatible with latest libflashrom.
Change-Id: I005159dd24e72da9cc43119103c96c5dd5b90a55
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17447
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We might not care much about this buffer, but we really use it later
on...
Change-Id: Ia16270f836d05d8b454e77de7b5babeb6bb05d6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1294797
Reviewed-on: https://review.coreboot.org/17860
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
- Because $configoptions contains embedded newlines that we want to be
interpreted when we pipe it out to the config file, change that back to
a printf, and tell shellcheck that we want to do it.
- 'make olddefconfig' & 'yes "" | make oldconfig' give us the same
output for the config file, but olddefconfig doesn't generate the log
the way oldconfig does. Go back to the previous behavior.
- Don't overwrite the config log with make savedefconfig.
Change-Id: I4966a3bb2541b452eeb4ca73ac3cd727f8525636
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17853
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
So far, cbfstool write, when used with the -u/-d options (to "fill
upwards/downwards") left the parts of the region alone for which there
was no new data to write.
When adding -i [0..255], these parts are overwritten with the given
value.
BUG=chromium:595715
BRANCH=none
TEST=cbfstool write -u -i 0 ... does the right thing (fill the unused
space with zeroes)
Change-Id: I1b1c0eeed2862bc9fe5f66caae93b08fe21f465c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: baf378c5f2afdae9946600ef6ff07408a3668fe0
Original-Change-Id: I3752f731f8e6592b1a390ab565aa56e6b7de6765
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417319
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17787
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We never specified what value add-int should write by default.
Change-Id: I240be4842fc374690c4a718fc4d8f0a03d63003c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17796
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Show an error if a symbol does not have a defined type.
This caused a problem of an undefined symbol in check_defaults, so
we just skip those symbols there as we can't verify the default pattern
without knowing the type.
Change-Id: I28711a77962e16f6fc89789400363edd0fdd0931
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since we've removed them from the tree, add a check to keep them out.
Change-Id: I2995da765fee8796a297963d54a1c34f56376efe
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Overriding symbols within a .config is pretty common when doing
automated builds with various different options. The warning
text makes it sound like this is an issue, so change it to say
'notice' instead. We could get rid of it completely, but it's
not a bad thing to know that we have two copies of the same symbol
in the .config.
BUG=chrome-os-partner:54059
TEST=copy a disabled kconfig option to the end and set it to y.
See notice text instead of warning.
Change-Id: I9f575b2275233f638e42676263348c807e6515bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Show an error if a directory is added after the command line options
to catch scripts using the old parameters.
- If an invalid parameter is specified, show the parameter.
Change-Id: Ie8948361f1c51e89a99bdb13df8c554747cd521d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17741
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
cbroot was previously specified by just adding it to the end of the
command line with no explicit identifier. This change allows it to
go anywhere in the command line and adds the -R or --root identifier.
This makes the command line more consistent. Most of the time, this
argument isn't even needed, as the automatic detection finds cbroot.
Change-Id: I1d6fd8f51765d0d8b29be8af1e8105e06dd44cc8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17740
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Indent with spaces for consistency
- Change lbroot to cbroot
- Remove incomplete list of options from usage line
- Capitalize first word of all option text
- Alphabetize options other than version and help
- Move version and help options to the end
Change-Id: Id5bd4db8d7e3705cbbb93895a46a3608cd1b09e2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17724
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This cleans up the shellcheck warnings in abuild.
Warning count:
1 Unexpected ==.
1 Use "${var:?}" to ensure this never expands to / .
1 VARIABLE appears unused. Verify it or export it.
1 Use "$@" (with quotes) to prevent whitespace problems.
2 Consider using { cmd1; cmd2; } >> file instead of individual redirects.
2 Expressions don't expand in single quotes, use double quotes for that.
3 Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
4 $/${} is unnecessary on arithmetic variables.
5 Check exit code directly with 'if mycmd;', not indirectly with $?.
5 Use cd ... || exit in case cd fails.
11 Declare and assign separately to avoid masking return values.
13 Use $(..) instead of legacy `..`.
20 Don't use variables in the printf format string.
104 Double quote to prevent globbing.
Change-Id: I9c77e122435ba87ce3a4aee76b5022f7265f9ef2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update abuild to allow for building saved miniconfig files.
If one or more config files exist for a platform under
coreboot/configs, they will be built instead of the automatically
generated default config.
The config filename needs to start with "config.$VENDOR_$BOARD" to be
picked up by the abuild script.
- Update to version 0.10.0
- Add -d parameter to specify the saved config file directory
- Break 2nd half of create_config function into update_config
to set the payload for saved config files.
- Unset new payload Kconfig options that could be set in a saved
config file.
- Update a bunch of MAINBOARD variable names to BUILD_NAME since
the build name isn't necessarily the same as the mainboard name.
- Split build_target into two functions - build_target and
build_config because one mainboard can now build multiple
configurations.
- Update remove target and call it directly from build_target()
instead of from build_targets()
Change-Id: I1a276d3e507b178f7dcd9dc125fa9c59f1ab47bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17590
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For some reason the \n in the defconfig save error was not escaped.
Change-Id: I6a76b258f461a194fe17aae2b4fa04326b46d8d6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17742
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
It turned out that newer GNAT versions can build our current (5.3.0)
GNAT without bootstrapping. So adapt the version enforcement.
Change-Id: Ie7189e8bcadeee56cf5c2172e8c0ae7cd534685a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17706
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
With some newer versions of GCC (experienced with GCC 6.2.1 on Arch-
Linux) the first stage of a boostrapping fails due to a mismatching
function prototype. Also add a missing `static` to the signature.
Change-Id: Ia927036ccd725550f1191890515578bc80c74f80
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Because of the varied environments that coreboot is built under, we
don't want to have symbolic links in the tree.
Change-Id: I4cf9d95a437626cb52e3032a5e6cba83320a334b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17633
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As devicetree files can have different name followed by extension cb
Exclude all .cb file from the license header check.
Change-Id: I37b651eedd77cbf3d3e65ff0f027f971b0a2d2ac
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17186
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Show number of threads being used to build.
- Show the version number of each package when skipping it.
- Show whether the tool is a host or target build.
Change-Id: I1134c08b417a731859e6b25fe38aecf01a85927b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17418
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
- All of the symbols are in the .config, so if .config is include in
the search all of the symbols are always found.
- There are now some Kconfig symbols in the Documentation directory,
so that needs to be excluded.
- 3rdparty has lots of Kconfig symbols that are unrelated to what
is being searched for.
Change-Id: I0ff56d0a0916338a8b94f5210b8e0b3be5194f41
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Don't search for symbols in the payloads directory, except for specific
files that are actively added back to the search.
Change-Id: I6f28dc7dee040b8061fa5644066f3613367b6d84
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Otherwise errors similar to "touch: cannot touch
'${TARGETDIR}/.GMP.6.1.0.success': No such file
or directory" might occur.
Change-Id: I4f24c93a25b7d567d3ce14a0415d20fd0778c9c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17603
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Use a unique bus/device/function if a bay trail LPC bridge was found.
TEST=Run on MinnowBoard MAX Turbot and customer's LynxPoint-LP.
Change-Id: Ib4b50aaf9817ac94f46c28925081540676226d84
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17464
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Previously, the .success file for each target didn't save the version,
of the package that was built. This created problems when someone
wanted to update to a new version and could not rebuild.
Change-Id: I9975b198ac4a7de8ff9323502e1cbd0379a1dbb8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17417
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Return an error if the specified file could not be opened. To do this
cleanly, the return value was added.
- Since there's now a unified return value, use it where it makes sense.
- Don't return an error from --help. If you've asked for usage, it's
not an error.
Change-Id: I7c712d1e1927c2d4957b044b87ad26475b7a0e3b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17324
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Various fixes for clang warnings:
warning: arithmetic on a pointer to void is a GNU extension
- change *rom from void* to char* and cast back to void* as needed
warning: implicit conversion changes signedness
- In ALIGN macro, pass in value as unsigned
warning: no previous prototype for function
- Change functions to static
warning: no previous extern declaration for non-static variable
- Change global variables to static
warning: comparison of integers of different signs
- Make loop variable 'i' unsigned
warning: variable 'output' may be uninitialized
- Make sure an output filename was specified
warning: implicit conversion loses integer precision
- cast fd_stat.st_size to the appropriate type
Change-Id: I0134a79c00938e121e63b52fd63bd502f4cb9e99
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17322
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Previously, the ROM size was passed into amdfwtool solely as a #define,
meaning that all boards built with the tool would assume the same size
ROM. This became a problem when the default rom for abuild was updated
to be a board with a 256KB ROM.
The temporary solution was to build amdfwtool individually for each
board that needed it. This replaces that workaround by allowing the
ROM size to be passed in as a command line parameter.
- Add the -f | --flashsize option to accept a hex value for the ROM
size.
- Add checks to make sure the ROM size supplied is large enough.
- Because the ROM size is not hardcoded, it needs to be passed to
various functions.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I0ca69cbba54797e0387a6e85935767b4136ef615
Reviewed-on: https://review.coreboot.org/17321
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Apollo Lake uses yet another descriptor format where only two masters
are used: CPU/BIOS and CSE/TXE. CSE stores data in a region number 5
that has not been used previously and CPU must not write it. Add quirk
(-p aplk) that locks descriptor according to recommended values.
BUG=chrome-os-partner:58974
TEST=ifdtool -p aplk -l bios.bin; ifdtool -d bios.bin.new. Make sure
FLMSTR1 and FLMSTR2 are set correctly. unlock with -l and make sure
FLMSTRs are restored.
Change-Id: I3f33372bef3ff75d0e34030694c79cd07d5540de
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/17202
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Double the space for psp2dir to 0x200.
Based on advice from AMD, increase the region containing
the signature to 4K.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit e03a9402711c3a210816d0aa32865491a0523639)
Change-Id: If60132f913928bab0c2fe4aacedf342080929599
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17148
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 482b65c219b932fd374f2ac469a023db219a66de)
Change-Id: I0a24a0aa4c7d9f4a8cc3ee9b7da60ea7704e6f17
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17147
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Make the PSP2 smufirmware2 name unique so the command-line option
gets picked up.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: <marcj303@gmail.com>
(cherry picked from commit 98cf3880797f72aeb7169c3f8718a10092af9624)
Change-Id: I5430cf8b81fb03c95e6ee9d7e53455e6224256ff
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17146
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Dumping and behavioral analysis have shown that there are more registers
in the environment control of the IT8783E/F than documented in my data-
sheet. This adds every register that wasn't 0x00/0xff by default. The
default values are guesswork: those that looked like sensor readings
became NANA, others are taken from dumps.
Change-Id: I7e39700c9b98ed5be9f085bc8ffd848006310254
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17005
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Values are taken from an unpublished datasheet. With the exception of
the default value for register 0x55 in the environment controller space:
Looks like this was just documented wrong. The dumped value of 0x50 also
makes more sense.
Change-Id: I2bd23d30b7158b2e05fcee7c6280df82570d1401
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add new dump format to superiotool that prints each register on a
separate line. This should be more suitable for diff'ing dumps of
multiple superiotool runs.
Change-Id: I226ee82b903bf77e760d3396d02fa50688adb9f2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The checkpatch script takes a really long time to run, and when the
output is buffered to wait until it's finished, it's hard to tell if
the script is actually doing anything.
Instead, use tee to log the output and display it at the same time.
Change-Id: I3cf36e5e6ca28584103888ee1c6f125320ac068a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17125
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Change-Id: Ia40543e5585845e5e6c178a620052c6a25927a5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17102
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It has nothing to do with git configuration, but is one of our
convenience scripts. It also has nothing to do with rebases (except that
it can be comfortably used through git rebase --exec)
Change-Id: Icc60c4de486a0027fe2230e93b441e62ba022193
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17101
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The relevant data is gone in Chrome OS depthcharge's master branch, and
so the script outlived its usefulness.
Change-Id: I04f3f168e23d4bc7c31692263a8eec3f97ee50de
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17100
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Change-Id: Ic5a3be1128f2f9a53d21e0a2c577192962260df6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17018
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a --force/-F option and enable it for cbfstool write, where it has
the effect of not testing if the fmap region contains a CBFS or if the
data to write is a CBFS image.
Change-Id: I02f72841a20db3d86d1b67ccf371bd40bb9a4d51
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16998
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: I81ced8c6e02b00a3835e3b42c9cf2669b1b2bd3e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
[jn: Added XGCC_BIN variable to avoid requiring the tools in $PATH]
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16955
Tested-by: build bot (Jenkins)
gerrit-rebase is a gerrit-context aware rebase script. Given a source
and a target branch (that need to have a common ancestor), it prepares
a rebase todo list that applies all commits from source that aren't
already found on target.
It matches commits using Reviewed-on lines in the commit message that
are added by gerrit when submitting commits using the "cherry-pick"
strategy.
This has been shown to be the best preserved meta data to work from in
existing data (Change-Id was mangled in all kinds of ways).
Change-Id: I9618c1b66ebc1fb7ed006efbc1665fb08386e1a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16695
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
flashrom treats them as invalid because start > end.
Change-Id: I1c8b4563094823ebd9b1193b91e7b4a748955228
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16936
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
max_regions is set to the maximal regions based on the ifd version
Change-Id: I9fa5a4565f4dbd67b5c6df97756311560e2a18bc
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16934
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
We do this so that the riscv objdump can be used on the coreboot.elf file.
Change-Id: Ib8bf85a3299dd75b779e7fa3757f5b62c9c7170b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/16918
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Between GNU Tar 1.28 & 1.29, the files excluded by --exclude-vcs was
updated. This breaks the reproducibility. Instead, just manually
exclude the files to match what was excluded in v 1.28 and earlier.
Change-Id: Ie0717891506f4a6d750ff264f9cc2494a296265b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16900
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add more help text.
- Remove braces from variables where the variable is isolated.
- Remove --recurse-submodules from clone. This breaks on old coreboot
versions.
- Add some whitespace between blocks.
- Fix all shellcheck warnings.
- Verify tar version and fail if it doesn't support --sort.
Change-Id: I4a49df99532d9a92a4a05bceff16f96a4fc3e205
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16883
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Internal changes:
- Fix shellcheck issues.
- Add some help text and update section header text.
- Reorder sections to try to get better estimates of what the commits
were mainly touching.
- Start making the script slightly less coreboot-centric.
- Don't print git errors.
Changes in output:
- Find new and deleted CPUs, SOCs, northbridges, southbridges, and SIOs.
- Show new users.
- Show before and after commit count for all authors.
Change-Id: I9858436f9458b2859a91273a525901df34796df4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16848
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add an exception for MAINBOARD_POWER_ON_AFTER_POWER_FAIL when checking
- With those exceptions set, we don't have anymore #define or #ifdef
warnings, so turn them to errors so no more can be pushed.
- Change the definition of an unused symbol from a warning to a note.
There are times when unused symbols are expected.
- Upgrade the warning for loading Kconfig files multiple times from
a warning to an error.
Change-Id: I6dcb06d4f0b099d5ccaf7643e72dd790719bdf58
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16840
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The type of the default value wasn't being checked to make sure that it
matched the type of the Kconfig symbol.
This makes sure that the symbol is being set to either a reasonable
looking value or to another Kconfig symbol.
Change-Id: Ia01bd2d8b387f319d29f0a005d55cb8e20cd3853
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16839
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We were not setting the init_size for linux payloads.
A proper value of init_size is required if the kernel
is x86_64.
This is tested in qemu and fixes the observed problem
that 974f221c84b05b1dc2f5ea50dc16d2a9d1e95eda and later would not
boot, and would in fact fail in head_64.S.
Change-Id: I254c13d16b1e014a6f1d4fd7c39b1cfe005cd9b0
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://review.coreboot.org/16781
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
The dockerfile allows building an image with the current tree's
crossgcc code.
Change-Id: I59cd85b0acdf8776e3e090742d7f5d89d1c154e7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/16636
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
GCC build instruction recommend to bootstrap a native compiler first.
Not sure, when that is really necessary. A major version change seems
reasonable.
Change-Id: I80a9ec25739b7d33a1d1c7b4b2140d19d89a99ae
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16675
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Just add some helpers that show parts (major, major.minor) of the GCC
version to be built (buildcc_*) and of the host compiler (hostcc_*).
They will be used in follow-up commits.
Change-Id: I37c12ad1a2d08645f40a9f0f0a479c8d7cc3e127
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16674
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Also remove a dead line that checks for unknown options: We already let
`getopt` check that.
Change-Id: I0e829b266e192757d6e455ee4cc608315bb4b7be
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16681
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We accidentally checked the status of `eval` instead.
Change-Id: I1ba258944184ed707ed1f176e528d8266656cb59
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Looks like this never worked correctly: There are three argument formats
to GNU getopt and none of them matches what we fed it. The missing
double dash before the `set` arguments proves that we always called it
with parameters that `getopt` did NOT parse.
Change-Id: Ib8343976ef31774b18567a9fc9745a9f58dd287a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16679
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
As we support `getopt` versions that don't know long options, every
option arguments needs a short option.
Also add the long options `--urls` and `--nocolor` to the `getopt`
string.
Change-Id: I11c393c3d90c7a16cdda119594221c85f902ed40
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16682
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
According to datasheets for Intel ICH/PCH, it works for chipsets from
ICH7 to 9-series PCH, with PCI device address D31:F2.
Change-Id: If1ddd7208108bda949b5a94894a7bf9e8bfe1e5f
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/15106
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I3e3973e1c47505718cf73435156104ab73680441
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16387
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
checkpatch warns that the asmlinkage storage class should be at the
beginning of the declaration when we define it to be an empty value.
Change-Id: I12292d5b42bf6da9130bb969ebe00fca8efcf049
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16358
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Check Kconfig files as well.
- Accept a list of directories to check as a command line argument.
- Only look at src & util directories by default.
- Skip src/vendorcode.
- Remove bypass of payloads/coreinfo/util/kconfig directory, it no
longer exists.
Change-Id: Ia522d3ddc29914220bdaae36ea23ded7338c48fd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16359
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a stripped-down version of libgnat. This is somehow comparable to
libgcc but for Ada programs. It's licensed under GPLv3 but with the
runtime library exception. So it's totally fine to link it with our
GPLv2 code and keep it under GPLv2.
Change-Id: Ie6522abf093f0a516b9ae18ddc69131bd721dc0c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/11836
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
tar doesn't sort by default and takes the order of the OS which is in
most cases the order of creation. Sort by name and set influencing
environment TZ and language to be reproducible.
Change-Id: I3d043952417000d12e81353677f1ea4aa2da4fc1
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16556
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Fixes the warning:
Use of uninitialized value in concatenation (.) or string at
util/lint/checkpatch.pl line 4739
Change-Id: Idc3c631735a595517d77cb8b8ec67e1ac00b6685
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16357
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This pulls in two fixes that were added to coreboot's checkpatch.pl
script:
- commit 82ef8ada (src/commonlib/lz4_wrapper: Correct inline asm for
unaligned 64-bit copy):
modify checkpatch.pl to ignore spaces before opening brackets when
used in inline assembly.
- commit ebef00fa (lint/checkpatch.pl: escape \{ in perl regex to fix
warnings):
Unescaped left brace in regex is deprecated, passed through in regex;
Change-Id: Ia2c712c5b1bb5f67953a9098b5a076e31e3bd8d3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16348
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cbmem --help should not return an error to the OS.
Change-Id: Id00091c679dbb109bc352cf8a81d67c2ae5666ec
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16574
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
The generated dependencies doesn't work when
used together with our main build system.
Change-Id: I93d26858e961d7e275d586a1b8a26b3d33f3bd41
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16572
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Alex Thiessen