Fill in the NHLT ACPI OEM header fields to differentiate
different audio solutions on a per board basis. This handles
boards that share a firmware that are differentiated by
the SKU id and boards that have their own firmware. For the
latter, the Oem Table ID uses the VARIANT_DIR to differentiate.
"reef" is always used for Oem ID which is treated as more of
family in this case.
iasl -d shows the following on reef:
[00Ah 0010 6] Oem ID : "reef"
[010h 0016 8] Oem Table ID : "reef"
[018h 0024 4] Oem Revision : 00000008
BUG=chrome-os-partner:60494
BRANCH=reef
Change-Id: I5daa6f0306bc05e812a8737ce61ee37177a36b76
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17772
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
There are 2 gpios on reef-like boards that can be composed
into a SKU. Add support for identifying the SKU value using
the base 3 gpio logic. Also export the SKU information to the
SMBIOS type 1 table.
BUG=chrome-os-partner:59887,chrome-os-partner:60494
BRANCH=reef
Change-Id: I8bb94207b0b7833d758054a817b655e248f1b239
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17771
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There is ongoing work to link SPI bus and devices in to the devicetree
so this can be generated, but for now put in the raw ASL code to
describe this controller so it can be used by the factory.
BUG=chrome-os-partner:55538
TEST=successfully load fpc1020 kernel module on eve board
Change-Id: I6641664e60fcf2c0bad4b3506c77513b26d7be2e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17776
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Previously privilege drop was happening "too early" and that caused some
PMC IPC programming (performed in FSP) to fail because sideband was
already locked out. This change set moves privilege drop to later stage,
after last FSP notify call.
BRANCH=reef
BUG=chrome-os-partner:60657
TEST=iotools rdmsr X 0x121, make sure they can't be read.
Also dmesg|grep -i IPC to make sure there are no errors related
Change-Id: Ia3a774aee5fbf92805a5c69093bfbd3d7682c3a7
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/17769
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There are circumstances where the APs need to run a piece of
code later in the boot flow. The current MP init just parks
the APs after MP init is completed so there's not an opportunity
to target running a piece of code on all the APs at a later time.
Therefore, provide an option, PARALLEL_MP_AP_WORK, that allows
the APs to perform callbacks.
BUG=chrome-os-partner:60657
BRANCH=reef
Change-Id: I849ecfdd6641dd9424943e246317cd1996ef1ba6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17745
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
The bootstate machine allows one to schedule work at the
boundaries of each state. However, there are no priorities by
design. As such if there are things that need to be performed
that are interdependent between callbacks there's no way to
do that aside from explicitly putting the call in one of the
callbacks.
This situation arises around BS_OS_RESUME, BS_PAYLOAD_LOAD,
and BS_PAYLOAD_BOOT as those are the states where coreboot is
about to exit. As such, provide an architecture specific hook
at these key places so that one is guaranteed any work done
in arch_bootstate_coreboot_exit() is after all callbacks in
the state machine.
BUG=chrome-os-partner:60657
BRANCH=reef
Change-Id: Icb4afb341ab15af0670501b9d21799e564fb32c6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17767
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The MRC cache uses an incoherent mechanism for updating the
cache contents in that it assumes memory mapped boot device
access for checking against latest data for update. However,
it uses another driver for updating the underlying storage
area.
In order to aid in moving the MRC cache over to using
region_devices for updates provide an implementation of
a region_device which performs reads and writes to different
region_devices so that different drivers can be used
transparently.
BUG=chrome-os-partner:56151
Change-Id: I30e858245c30cbccd6313aff5ebecd3fd98d7302
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17716
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The MRC cache wants to be able to access the SPI flash boot device.
Allow an easy way to provide that so that there isn't duplicate
spi_flash objects representing the same device.
BUG=chrome-os-partner:56151
Change-Id: Iba92e8bb8a6060cdd327b10f5f8ec23ac61101e7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17715
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The region file library is added to provide the underpinnings for
other libraries that support appending updates when the data changes.
The most recent written data is deemed the latest data associated
with that "file". A good example is the MRC cache which in a follow-up
patch utilizes this library.
BUG=chrome-os-partner:56151
Change-Id: Ic3caf1edbb6f11dbbe27181a87b7b19d1224fffa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17713
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
compute_ip_checksum() doesn't manipulate the data it is passed.
Therefore, mark it as const.
BUG=chrome-os-partner:56151
Change-Id: I54cff9695a886bacd6314aa441d96aaa7a991101
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17714
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Simplify set_power_led() by consolidating switch and setting values
as needed inline based on LED state. Remove unnecesary function
param, includes for Tidus.
Change-Id: I28e6fac5f8d7e2ff419002db714ce88697895faf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17744
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
This driver applies to 10ec:8168
Previously, this driver resetted the nic and set a hardcoded
MAC address. Now the driver reads a default MAC address
from CBFS in the form of a string:
echo -n "xx:xx:xx:xx:xx:xx" > macaddress
and store the macaddress file in CBFS with the same name.
TESTED on GA-G41M-ES2L and GA-945GCM-S2L:
MAC address was detected
Change-Id: If1af91120fa3efca3f1406334a83ed1e59fbdaf9
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/17672
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This makes CHIPSEC happy. We don't enable PAVP, but it shouldn't hurt
to lock it nevertheless.
Change-Id: I9428f0b6e8868832eb79f7aea24cbc7961c2aa8f
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Reviewed-on: https://review.coreboot.org/17352
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
CHIPSEC found that the TCO_Lock was not set.
This is used to prevent changing the TCO_EN bit.
Change-Id: I42364dbef2511e656662566cf94591e76c6847ed
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Reviewed-on: https://review.coreboot.org/17351
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The EM4/EM5 registers in the mini-HD audio device must be set based
on the GPU cdclk value in order for HDMI audio to function properly.
Add variables to save the correct values when initializing the GPU,
and accessor functions to retrieve them in order to set the registers
when initializing the mini-HD audio device.
Change-Id: Icce7d5981f0b2ccb09d3861b28b843a260c8aeba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17718
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Simplify set_power_led() by consolidating switch and setting values
as needed inline based on LED state.
Fix non-off LED polarity for Tricky using correct value from Chromium source
TEST: power on Tricky, observe LED lit / solid
Change-Id: I8bc7c4ae3f83d3f37b76fd5c90a4faed7057ebee
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17719
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add helper function to find a device by path type
in the device tree.
Change-Id: I8846f63bd2488788ea3c7ab5154e7cf431a252bc
Credits-to: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Dhaval V Sharma <dhaval.v.sharma@intel.com>
Reviewed-on: https://review.coreboot.org/17731
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
1. Define controller for fast SPI.
2. Separate out functions that are specific to SPI and flash controller
in different files.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully for reef.
Change-Id: If07db9d27bbf4f4eb6024175cb7753c6cf4fb793
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17562
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
1. Add new structure spi_ctrlr_buses that allows platform to define a
mapping from SPI controller to buses managed by the controller.
2. Provide weak implementations of spi_init and spi_setup_slave that
will be used by platforms using the new interface.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Ia6f47941b786299f4d823895898ffb1b36e02f73
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17561
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Skylake uses a special SPI Flash controller and does not require
spi_claim_bus and spi_release_bus functionality. This was a leftover
call from earlier cleanup, so remove it.
Change-Id: Iea260813cf72b94b7e7c661dbe494a74351dc357
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17729
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add the new time stamps *finalize chips* to track, when the method
`dev_finalize_chips()` is called, so that the real time of
`write_tables()` is known.
Change-Id: I65ca0ec4c07c2eaa14982989cb206d23d8a2293f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17725
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This will be used by new Roda boards. Four UARTs and PS/2 keyboard and
mouse are exposed to ACPI. Since our boards only use the environment
controller part, most of the usual pnp interfaces are untested.
Change-Id: Ifeb0327ad115759411716f82585ace5ce55b8464
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17287
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
ITE super-i/o chips need a fourth byte and have a special register
to exit config mode.
Change-Id: Ic40873649d567b87d3a937f2bf068649e67715de
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17286
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Resource is actually stored even before read_resources, but
that's where we currently log this resource.
For Intel, use PCI config register offset as the resource
index, while AMD side uses MSR address.
Change-Id: I6eeef1883c5d1ee5bbcebd1731c0e356af3fd781
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17696
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Doing PCI config operations via MMIO window by default is a
requirement, if supported by the platform. This means chipset
or CPU code must enable MMCONF operations early in bootblock
already, or before platform-specific romstage entry.
Platforms are allowed to have NO_MMCONF_SUPPORT only in the
case it is actually not implemented in the silicon.
Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17693
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Drastically reduced RW_MRC_CACHE size to hold one update. Now
that this area isn't changing after every S5 entry there's no
need make it so large.
- ELOG area reduced by 4KiB for subsequent area alignment. In practice
this doesn't matter because the elog library only uses 4KiB bytes.
16KiB->12KiB is a nop.
- Moved RW_NVRAM for subsequent alignment.
- Most importantly, RW_SECTION_(A|B) are aligned to 64KiB boundaries
and sized to 64KiB multiples. This ensures updates don't need a
read-modify-write that could force a system into recovery if
an inopportune power event occurred.
BUG=chrome-os-partner:60492
BRANCH=reef
Change-Id: I2a2e2797897c934db1a3f9627c6c13a9b2aad540
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17727
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We may support different sdram sizes on one board in future, so
we need to calculate sdram sizes from sdram drvier.
BRANCH=None
BUG=None
TEST=boot kevin
Change-Id: I43e8f164ecdb768c051464b4dbc7d890df8055d0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c4d8b3cb647b2f9cebc416c298817c16d49330e
Original-Change-Id: I95d5ef34de9d79ebca3600dc7a4b9e14449606ff
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/411600
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17629
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Gru only uses USB 2.0 in firmware to avoid all the madness associated
with Type-C port orientation and USB 3.0 tuning. We do this by isolating
the SuperSpeed lines in the Type-C PHY so it looks like they aren't
connected to the device.
Unfortunately, some devices seem to already get "locked" into SuperSpeed
mode as soon as they detect Rx terminations once, and can never snap out
again on their own. Since the terminations are already connected during
power-on reset we cannot disable them fast enough to prevent this, and
the only solution we found to date is to power-cycle the whole USB port.
Now, Gru's USB port power is controlled by the EC, and unfortunately we
have no direct host command to control it. We do however have a command
to force a certain USB PD "role", and forcing our host into "sink" mode
makes it stop sourcing power to the port. So for lack of a saner
solution we'll use this to work around our problem.
BRANCH=gru
BUG=chrome-os-partner:59346
TEST=Booted Kevin in recovery mode, confirmed that my "problem stick"
gets detected immediately (whereas previously I had to unplug/replug
it). Booted Kevin to OS in both developer and normal mode and confirmed
that USB still seems to work.
Change-Id: Ib3cceba9baa170b13f01bd5c01bd413be5b441ba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cd695eda33299e50362f1096c46f2f5260c49036
Original-Change-Id: I2db3d6d3710d18a8b8030e94eb1ac2e931f22638
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/413031
Reviewed-on: https://review.coreboot.org/17628
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Normally firmware should have no business messing with the USB PD role
(source/sink/whatever) in the EC. But, as so often happens, ugly issues
crop up that require weird work-arounds, and before you know it you need
to do this for some reason that only makes sense in context. I do now,
so add this function to send the necessary host command in the simplest
possible fashion.
BRANCH=gru
BUG=chrome-os-partner:59346
TEST=Used it in a follow-up patch.
Change-Id: I07d40feafd6a8387a633d6384efb205baf578d76
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8b71767caccff9b77d458182ce8066f7abf6321c
Original-Change-Id: Ie8d0be98f6b703f4db062fe2f728cd2588347202
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/413030
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://review.coreboot.org/17627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Resource allocator and 64-bit PCI BARs will need it and
PCI use is not really restricted to x86.
Change-Id: Ie97f0f73380118f43ec6271aed5617d62a4f5532
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17733
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
MMCONF operations are already the default so these
would never be used.
Change-Id: I671f3d2847742e400bc4ecfccc088e3b79d43070
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17691
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access
being non-atomic and/or need to access 4kiB of PCI config space.
All these platforms now have MMCONF_SUPPORT_DEFAULT.
I liked the style of code in pci_mmio_cfg.h more, and used those to
replace the ones in io.h.
Change-Id: Ib5e6a451866c95d1edb9060c7f94070830b90e92
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17689
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The code originates from times before __SIMPLE_DEVICE__ was
introduced. To keep behaviour unchanged, use explicit PCI
IO operations here.
Change-Id: I44851633115f9aee4c308fd3711571a4b14c5f2f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17720
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Aaron Durbin