Add an additional Sandy(Ivy)bridge processor socket.
Change-Id: I7eff7183d0c003e61fdda5350579f4d3dec7504d
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/12168
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: York Yang <york.yang@intel.com>
The Intel i8900 Super I/O is similar to the previously
supported i3100.
Change-Id: I9a5b651cab35991c3c3e09fc4668d35ca2d221ba
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/12169
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: York Yang <york.yang@intel.com>
The Intel northbridge must be paired with a southbridge. Add
the ii89xx southbridge header based on the config setting.
Change-Id: Ied708006310efaba31afe6977ab7e57fe4e5ceec
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/12167
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The Intel i89xx is a communications chipset that pairs with
Sandy(Ivy)bridge processors. It has a lot in common with
the bd82x6x chipset, but fewer devices and options.
Change-Id: I11bcd1edc80f72a1b2521def9be0d1bde5789a79
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/12166
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Winbond WPCD376I is a desktop Super I/O often selected on
Intel mainboards. The support is similar to other Winbond and NSC SIOs.
Based on output from superiotool -d.
Change-Id: Ib4786b410b1d83606e8d79a9f686c14a5d25cadf
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/12165
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Add two functions to set a memory mapped GPIO to a given value.
TEST=Booted siemens/mc_tcu3 board and confirmed GPIO-value after
using this functions.
Change-Id: Idc14c5d4049487e60040cc294ba0cea363d998a6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/12341
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I76f74ed4ae383f8b1f57eaaa2e025035002430f2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11967
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The RDK amd/db-ft3b-lc board will use this for on-board DDR3.
Change-Id: I2ffd38e7e949d3a60487e91188ddaab04b03d4b2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12358
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Building with Clang without option -Wno-unused-function causes building
error. I don't know why GCC doesn't have that issue.
------------
coreboot/src/commonlib/fsp1_1_relocate.c:47:23: error:
unused function 'le8toh' [-Werror,-Wunused-function]
static inline uint8_t le8toh(uint8_t byte)
^
1 error generated.
------------
Change-Id: Iecd1e84e4321446412ef68d65dc918baf1ab45ce
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12339
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: York Yang <york.yang@intel.com>
The additional local data storage requirements of the full DDR3
DRAM training algorithm make a BSP stack overrun a distint
possibility. Increase the BSP stack size to compensate.
Change-Id: I51af31442f2b77cb64a4b788751ccc7186acb283
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11972
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Since, SMP support is removed for ARM64, there is no need for CPU
initialization to be performed via device-tree.
Change-Id: I0534e6a93c7dc8659859eac926d17432d10243aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11913
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove SMP
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: Ife24d53eed9b7a5a5d8c69a64d7a20a55a4163db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11909
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove spintable
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: I1f38b8d8b0952eee50cc64440bfd010b1dd0bff4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11908
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
With the removal of secmon from coreboot there are no
power down operations required. As such remove the
A57 power down support.
Change-Id: I8eebb0ecd87b5e8bb3eaac335d652689d7f57796
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11898
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
This cast only hides errors in matching the API properly.
Change-Id: I9b878ab997b8ff087a7209f94522646b10b94bf6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12271
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This cast only hides errors in matching the API properly.
Change-Id: Ic396dfb572a50ac5ce5c1c83424e1f17f15bad1d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12270
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
PMIOxEE is for setting USB3 power rail. Set it to S0, otherwise
going into hibernation can not be wake up.
Change-Id: I692497bad24d745738d670897e725a568c1db114
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11373
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
"-u" is only for GNU cp. Cp of BSD and Solaris don't
take this option.
It is not necessary to compare the files before copying.
Change-Id: I60cf57991275db0e075278f77a95ca5b8b941c7f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11601
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The plugged devices on PCIe should use IOAPIC2 instead of standard
IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1.
The unchanged code worked because the OS uses MSI instead APIC.
To test that, boot linux with parameter pci=nomsi and see if the devices
like NIC work well as they do without the booting parameter.
Change-Id: I893e73f2aab3227381e44406fa285613e4ba2904
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11374
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Ic3cdfa6086a45aa231aa817d5ef6998823589818
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7108
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- CACHE_ROM is no longer used in the coreboot code. It was removed in
commit 4337020b (Remove CACHE_ROM.)
- CAR_MIGRATION is also no longer used in coreboot code - it was removed
in commit cbf5bdfe (CBMEM: Always select CAR_MIGRATION)
- MARK_GRAPHICS_MEM_WRCOMB was removed in
commit 30fe6120 (MTRR: Mark all prefetchable resources as WRCOMB)
Change-Id: I8b33a08c256f6b022e57e9af60d0629d9a3ffac8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12327
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Existing Intel xHCI controllers require a delay of 1 ms,
after setting the CMD_RESET bit in command register, before
accessing any HC registers. This allows the HC to complete
the reset operation and be ready for HC register access.
Without this delay, the subsequent HC register access,
may result in a system hang, very rarely.
Verified CherryView / Braswell platforms go through over
1000 warm reboot cycles (which was not possible without
this patch), without any xHCI reset hang in depthcharge.
BRANCH=None
BUG=None
TEST=Verified CherryView / Braswell platforms go through
over 1000 warm reboot cycles, without any xHCI reset hang
in depthcharge.
Change-Id: I8eff5115ca52738bdcf8bc65fbfb2a5f60a0abe1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3e7ea70df36e3bf35a6ee1297640900ee76bfdac
Original-Change-Id: Id681a19d0eedb0e2c29e259c5467bcde577e3460
Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310022
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12325
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch enables the Fan thermal participant device
in the device tree for thermal active cooling action
for DPTF on SKL-U fan based kunimitsu board.
This patch defines the _ART table in dptf ASL file.
With active cooling policy (_ART), we can control the
fan on/off and speed.
BRANCH=None
BUG=chrome-os-partner:46493
TEST=Built for kunimitsu board. Tested to see that the
thermal devices and the participants are enumerated and
can be seen in the /sys/bus/platform/devices. Also,
checked the FAN type the cooling devices enumerated
in the /sys/class/thermal with sysfs interface.
Change-Id: I40c540dad32beefe249f025b570c347d3ad08c36
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82ae11643ca23e65780006f3890f1d173363b8af
Original-Change-Id: If44b358052a677d13c74919f09a3eb89611fccad
Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307028
Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12323
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds the ASL file for Fan as cooling device
/participant for thermal active cooling action for DPTF
on SKL-U fan based kunimitsu board.
With active cooling policy (_ART), we can control the fan
on/off and speed.
BRANCH=None
BUG=chrome-os-partner:46493
TEST=Built for kunimitsu board. Tested to see that the
thermal devices and the participants are enumerated and
can be seen in the /sys/bus/platform/devices. Also,
checked the FAN type the cooling devices enumerated
in the /sys/class/thermal with sysfs interface.
Change-Id: Iacfd9152e300ec47895c29deab2c9d4361230849
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d37a089b5196f02cb95f16083c416456e96d54a4
Original-Change-Id: I8293bfe2a2bf213b69fbb4223bbfcf508a9cf0bf
Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307027
Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12322
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The MC/SMMU should be resumed by the kernel. And the unexpected value
in the MC_INTSTATUS should be cleared before that. Or it will cause
some noisy MC interrupt once we enable the IRQ in the kernel.
BUG=chrome-os-partner:46796
BRANCH=none
TEST=LP0 suspend/resume test and the EMEM decode/arbitration errors
should not be observed on resume.
Change-Id: I5b32fa58ebcb8e7db6ffc88e13cca050753f621a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 07cb719caf40b59c5519fcf212c2fb50f006812e
Original-Change-Id: I4d34905c04effd54d0d0edf8809e192283db2ca3
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309248
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Original-Commit-Queue: Joseph Lo <yushun.lo@gmail.com>
Original-Tested-by: Joseph Lo <yushun.lo@gmail.com>
Original-(cherry picked from commit 13cbcaf441bd762af9cf00eff24eb7709db38d95)
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309497
Original-Commit-Ready: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: http://review.coreboot.org/12321
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As vboot verification works on regions outside of CBFS
pass the entire ROM_SIZE to FSP for creating a cacheable
RO region.
Additionally remove the CACHE_ROM_SIZE_OVERRIDE as it doesn't
work with non-power of 2 CBFS_SIZE. In practice the entire
ROM should be attempted to be cached.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados w/ a 3MiB CBFS_SIZE.
Change-Id: I61404c626ab2bcfd039d6eb3c01d9c13a0928446
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 92568c630c48446b1ad9d4f22056f22e0679970c
Original-Change-Id: I032e4d615d2b68d3a2e597555eb1b5034a74bf0a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309770
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12260
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
enqueue_packet already runs start_ep_transfer, which enqueues the next
job. It's pretty much guaranteed that the port will look busy.
BUG=none
BRANCH=none
TEST=no spurious ep 0-0 busy messages
Change-Id: I9cbfa7b51dd37564262295ddbcdd0755da40c05b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8997dbd78dc363334f4e22eaa61f25de1449ffba
Original-Change-Id: I8a39713fc1d6f16b80284e0f21dc95685716a9b7
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308763
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/12259
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
hexdump() now takes a pointer instead of an int-containing-an-address.
BUG=none
BRANCH=none
TEST=building with USB_DEBUG works
Change-Id: Idd0c43031a212c8f3b6489f533c488805d98d6a9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8660f6091bb124eeabe73302e8c7f1a8e46324f1
Original-Change-Id: I266efcb8b939d6da104ad05a3e79a78065c60beb
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308762
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/12258
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Setting the Package Power clamping bits in Power Limit MSR
(MSR_PKG_POWER_LIMIT 0x610) Allows going below the OS requested
P or T state for the time window specified for PL1 or PL2.
BRANCH=none
BUG=chrome-os-partner:47041
TEST=Built and boot on kunimitsu, load the system with Aquarium WebGL,
change the power limit value from default (TDP or 15W) to any lower value
note that the Pkg power comes down and also the CPU frequency is lowered.
Change-Id: I9c0dd90a6660214ae142418aae8b8c5f6a739896
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b0b527991c2d26da5772700a22ff101eaf9993ef
Original-Change-Id: Ia59fcfe2a14cd7f8b1e1b8e967073e67eb452f42
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309556
Original-Tested-by: Charulatha Varadarajan <charuprasanna@gmail.com>
Original-Tested-by: Charulatha Varadarajan <charulatha.varadarajan@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12257
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
CBFS requests were always fulfilled using the CBFS specified in
cbtables. That's a great policy when default requests are sought, but
not so great when the user deliberately asked for something else.
So check if they want default CBFS media information, otherwise ignore
cbtables data.
BUG=chromium:445938
BRANCH=none
TEST=none
Change-Id: I01b63049eebfba6f467808ac84ef77385840c204
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 621c916ab14c0de4bae3dde09c05060c4f3c63c5
Original-Change-Id: Ia4a8848fd7db9d9a2bf9f5c226566fe3936ff543
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308520
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12232
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The touched workaround for Sandy Bridge reserves two memory regions that
could cause graphics corruption if mapped by the integrated graphics
device. To the best of our knowledge, the workaround is not needed for
Ivy Bridge revisions.
Tested on kontron/ktqm77 (Ivy Bridge): Booted Linux and checked the
memory regions are not reserved. Couldn't test on Sandy Bridge, due to
lack of hardware.
Change-Id: I4273d1d804b490cf93c23426782eb1ffaf29f7d4
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12326
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
There has been a concerted effort to clean up coreboot's microcode
handling that has included a move away from coreboot-specific
microcode file collections. As a result, the ability to specify
a single microcode file to be added to the image is of less utility
than before.
NOTE: This patch remove the built-in external microcode feature,
however the user can still specify no microcode during build and
manually add the correct microcode file(s) to the CBFS image after
the build is complete.
Change-Id: Ifea94c21e531a74953f5a0e2f489378c20ef3b5c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11903
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
The last_boot NVRAM option was deprecated and removed in
commit 3bfd7cc6. Remove the last_boot option from all
affected mainboards to eliminate user confusion.
Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12316
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Most AMD hardware requires at minimum two warm resets
when booting from S5 (power off). This is uncomfortably
close to the maximum bootblock execution count, and has resulted
in unstable normal/fallback operation on some machines.
Increase the default max bootblock execution count before fallback
to 6. This translates to roughly 2 - 3 failed boots before fallback
mode will engage, with an absolute worst case of pushing the reset
button 5 times to engage fallback mode in the absence of a dedicated
recovery jumper.
Change-Id: I1911f1b77f168835b516e6a915d5b6949f47219a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12317
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On mingw, the function glob has some default options
which are not compliant with man page.
If gl_offs is not set as 0, there may be some slots which
is reserved.
If gl_pathc or gl_pathv is not set as 0, the result might
be appended to the list instead of being added as new ones.
Change-Id: I03110c4cdda70578828d6499262a085a81d26313
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11711
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
The buildgcc makefile was using the variable 'BUILDJOBS' to pass the
number of cores to use for the build into buildgcc. This is changed
to 'CPUS' to match the variable name for the what-jenkins-does target.
Change-Id: I373c4988e9f096ca2e142afdd5e94d7d806891e3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12299
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a DMAR table to advertise IOMMU and IRQ remapping capabilities to
the OS.
Tested with kontron/ktqm77. Under Linux, the table is detected and
interrupt remapping is enabled automatically.
Change-Id: Id6ee601a0a8543ed09c6bb8d308a3a3549fc34e5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12195
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Sandy Bridge and Ivy Bridge processors have two IOMMU units. One for the
integrated graphics controller and one for all other PCI devices. Assign
resources for both IOMMUs and apply some quirks.
Tested with kontron/ktqm77 and a Muen based system that makes use of the
IOMMUs. Not tested on Sandy Bridge, but register dumps show the same
settings that are applied here.
Change-Id: I43b5e20b750e7529f448acac35de173185678fd9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12194
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Assign unique bus/dev/fn values for the I/O APIC and each HPET. The
values are taken from an example DMAR table. They are used as source-id
for MSI requests and as completer-id for reads from the device' MMIO
space [1, 2]. The former is usefull for source-id verfication during
interrupt remapping.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset
Datasheet
Document-Number: 324645
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH)
Datasheet
Document-Number: 326776
Change-Id: Ib46f8cfb7d966dd1cf2b026f671bc45ffcc43d25
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12193
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On server boards with a recovery jumper, having the fallback path
less sensitive to power fluctuations or BMC issues makes sense.
Increase the maximum number of boot attempts before automatic
fallback to 10 on these boards.
Change-Id: Iabe0b0cbf332686db8e9380a8b65a1477173599c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12320
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Marc Jones