GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/soc/intel/apollolake/Makefile.inc

190 lines
5.5 KiB
PHP
Raw Normal View History

soc/intel: Add skeleton infrastructure for Apollolake SOC This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-06 19:33:49 +02:00
ifeq ($(CONFIG_SOC_INTEL_APOLLOLAKE),y)
subdirs-y += ../../../cpu/intel/microcode
subdirs-y += ../../../cpu/intel/turbo
subdirs-y += ../../../cpu/x86/lapic
subdirs-y += ../../../cpu/x86/mtrr
subdirs-y += ../../../cpu/x86/smm
subdirs-y += ../../../cpu/x86/tsc
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
subdirs-y += ../../../cpu/x86/cache
soc/intel: Add skeleton infrastructure for Apollolake SOC This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-06 19:33:49 +02:00
soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLE Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11 02:47:03 +01:00
bootblock-y += bootblock/bootblock.c
soc/intel: Consolidate FSP CAR setup and teardown code This patch adds following changes, - APL, CFL, DENVERTON soc's using same implementation to setup and teardown FSP CAR. Hence cache_as_ram_fsp.S from soc folder is cosolidated into one file and moved to common code CPU car folder. - exit_car_fsp.S is from APL, DNV soc folder is clubbed into one file and moved to common CPU car. - The new file apollolake/fspcar.c is addded to pass tempraminit parameters. - Coffee lake Soc uses FSPT to support Intel Security features like BootGuard verify boot and Measured boot. Add FSP CAR support for CFL by programming tempraminit parameters and add FSP_T_XIP default if FSP_CAR is selected. BUG= None TEST= Build for both CFL RVP11 & RVP8 and verified for successful CAR setup. Build for both leafhill and harcuvar platform by selecting CONFIG_FSP_CAR without errors. Change-Id: I98d2dd9711ddc0d7ea7d1672fba700259ee3a3a9 Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-22 20:43:05 +02:00
bootblock-$(CONFIG_FSP_CAR) += fspcar.c
soc/intel/apollolake: use CAR code coherency for all CAR stages The flush L1D to L2 operation was only being used when loading romstage from bootblock. However, when the FSP-M component is loaded no code coherency actions are taken. I suspect this is because the FSP-M component is larger than the 24KiB L1D and the entry point is early in the image. Thus, when loading the FSP-M component the earlier part of the image is flushed out to L2 in the process of loading the latter part of the component. Also, once verstage is introduced the same code coherency actions need to be taken as well. Therefore, position the apollolake code to handle all these cases. Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14210 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-31 18:38:13 +02:00
bootblock-y += car.c
soc/intel/apollolake: Add basic HECI support Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15 02:16:35 +02:00
bootblock-y += heci.c
soc/intel/apollolake: Add support for GSPI BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Iec96f926ba7162074090617b7cf1c84e36b0fb37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/24906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-27 22:23:42 +01:00
bootblock-y += gspi.c
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
bootblock-y += i2c.c
soc/intel/common/block: Add LPC Common code and use it for APL Add LPC common code to be shared across Intel platforms. Also add LPC library functions to be shared across platforms. Use common LPC code for Apollo Lake soc. Update existing Apollolake mainboard variants {google,intel,siemens} to use new common LPC header file. Change-Id: I6ac2e9c195b9ecda97415890cc615f4efb04a27a Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-05 01:26:09 +02:00
bootblock-y += lpc.c
soc/intel/apollolake: Add support for memory-mapped boot media On Apollo Lake SPI flash is memory mapped. The mapping is different to previous platforms. Only "BIOS" region is mapped in contrast to whole flash. Also, the 128 KiB right below 4 GiB are being decoded by readonly SRAM. Fail accesses to those regions, rather than returning false data. Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13706 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13 00:12:43 +01:00
bootblock-y += mmap_boot.c
soc/intel/apollolake: Implement global reset handling Global reset enable bit is not cleared on reset. Therefore, clear the bit early. Lock down 0xcf9 so that payload/OS can't issue global reset. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I3ddf6dd82429b725c818bcd96e163d2ca0acd308 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15199 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-15 07:20:28 +02:00
bootblock-y += pmutil.c
intel/apollolake: Enable SPI properly in bootblock and ramstage Bootblock: - Temporary BAR needs to be assigned for SPI device until PCI enumeration is done by ramstage which allocates a new BAR. - Call spi_init to allow bootblock/verstage to write/erase on flash. Ramstage: - spi_init needs to run in ramstage to allow write protect to be disabled for eventlog and NVRAM updates. This needs to be done pretty early so that any init calls(e.g. mainboard_ec_init) writing to flash work properly. Verified with this change that there are no more flash write/erase errors for ELOG/NVRAM. BUG=chrome-os-partner:54283 Change-Id: Iff840e055548485e6521889fcf264a10fb5d9491 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15209 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-06-16 02:13:20 +02:00
bootblock-y += spi.c
soc/intel: Clean mess around UART_DEBUG Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-11-11 02:51:14 +01:00
bootblock-y += uart.c
soc/intel/apollolake: allow ApolloLake SoC to use FSP CAR Init FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize & tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to ApolloLake SoC when CONFIG_FSP_CAR is enabled. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17063 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-18 22:57:54 +02:00
soc/intel/apollolake: use CAR code coherency for all CAR stages The flush L1D to L2 operation was only being used when loading romstage from bootblock. However, when the FSP-M component is loaded no code coherency actions are taken. I suspect this is because the FSP-M component is larger than the 24KiB L1D and the entry point is early in the image. Thus, when loading the FSP-M component the earlier part of the image is flushed out to L2 in the process of loading the latter part of the component. Also, once verstage is introduced the same code coherency actions need to be taken as well. Therefore, position the apollolake code to handle all these cases. Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14210 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-31 18:38:13 +02:00
romstage-y += car.c
soc/intel/apollolake: Add romstage that calls FSP2.0 driver This romstage is minimalistic. Its goal is to set up some BARs that FSP expects to be set and then invoke FSP driver to train memory. Change-Id: I3fa56aafe99cf6cf062a46dece3a0febeafdbfad Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13805 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-26 02:42:25 +01:00
romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += romstage.c
soc/intel/apollolake: Add support for GSPI BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Iec96f926ba7162074090617b7cf1c84e36b0fb37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/24906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-27 22:23:42 +01:00
romstage-y += gspi.c
soc/intel/apollolake: Add basic HECI support Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15 02:16:35 +02:00
romstage-y += heci.c
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
romstage-y += i2c.c
soc/intel: Clean mess around UART_DEBUG Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-11-11 02:51:14 +01:00
romstage-y += uart.c
soc/intel/apollolake: Add cbmem_top() implementation On Apollolake CPU memory mapping is similar to previous SoC, and we place CBMEM right under TSEG. Change-Id: I606f690449ba98af6e9fc3074d677c7287892164 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13883 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-03 00:09:27 +01:00
romstage-y += memmap.c
soc/intel/apollolake: provide common LPDDR4 memory init Instead of having the mainboards duplicate logic surrounding LPDDR4 initialization provide helpers to do the heavy lifting. It also handles the quirks of the FSP configuration which allows the mainboard porting to focus on the schematic/design. Change-Id: I686eb3097c33399a3b94af89237f7fe1b2d34c2f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14790 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-12 19:43:37 +02:00
romstage-y += meminit.c
soc/intel/apollolake: Update memory HOB info save function SMBIOS memory HOB produced by glk FSP v52_27 has new structure members, which are not available in current apl FSP. New FSP-m header file in https://review.coreboot.org/#/c/20673/ lists new SMBIOS structure members. Break memory HOB save routine into different functions for glk and apl to accomodate new changes. Change-Id: I33c6e4f2842cebbb326b6a05436fa69e3836ffc6 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20674 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-21 00:11:19 +02:00
ifeq ($(CONFIG_SOC_INTEL_GLK),y)
romstage-y += meminit_util_glk.c
else
romstage-y += meminit_util_apl.c
endif
soc/intel/apollolake: Add support for memory-mapped boot media On Apollo Lake SPI flash is memory mapped. The mapping is different to previous platforms. Only "BIOS" region is mapped in contrast to whole flash. Also, the 128 KiB right below 4 GiB are being decoded by readonly SRAM. Fail accesses to those regions, rather than returning false data. Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13706 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13 00:12:43 +01:00
romstage-y += mmap_boot.c
soc/apollolake: Add helper functions to access Power Management Registers Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14289 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-05 05:13:34 +01:00
romstage-y += pmutil.c
soc/intel/apollolake: Add utility functions for global reset Apollolake defines Global Reset where Host, TXE and PMC are reset. During boot we may need to trigger a global reset as part of platform initialization (or for error handling). Add functions to trigger global reset, enable/disable it and lock global reset bit. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-18 00:30:13 +02:00
romstage-y += reset.c
intel/apollolake/spi: Add support for reading status reg spi_read_status reads the status register using hardware sequencing and returns 0 on success and -1 on error. Use spi_read_status to return appropriate value for get_sw_write_protect. BUG=chrome-os-partner:54283 Change-Id: I7650b5c0ab05a8429c2b291f00d4672446d86e03 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15266 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-18 00:50:24 +02:00
romstage-y += spi.c
soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLE Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11 02:47:03 +01:00
soc/intel/apollolake: provide SMM dependency requirements Depending on which options are selected there needs to be certain functions supplied. However, the spi, mmap_boot, and tsc_freq modules were not included in the SMM builds. Fix the omission. Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14977 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 21:22:34 +02:00
smm-y += mmap_boot.c
soc/intel/apl: Implement power-failure-state API Needed some Makefile changes to be able to compile for SMM. Change-Id: Ibf218b90088a45349c54f4b881e895bb852e88bb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-31 14:31:35 +01:00
smm-y += pmc.c
soc/apollolake: Add helper functions to access Power Management Registers Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14289 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-05 05:13:34 +01:00
smm-y += pmutil.c
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
smm-y += smihandler.c
soc/intel/apollolake: provide SMM dependency requirements Depending on which options are selected there needs to be certain functions supplied. However, the spi, mmap_boot, and tsc_freq modules were not included in the SMM builds. Fix the omission. Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14977 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 21:22:34 +02:00
smm-y += spi.c
soc/intel: Clean mess around UART_DEBUG Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-11-11 02:51:14 +01:00
smm-y += uart.c
soc/intel/apollolake: Enable logging for wake sources in S0ix This change adds GSMI callback elog_gsmi_cb_platform_log_wake_source to enable wake source logging from S0ix on APL/GLK. Additionally, elog.c is added to smm stage. BUG=b:79449585 TEST=Verified that S0ix entry/exit events are added to eventlog: =========== Power button ============ 59 | 2018-06-25 14:01:11 | S0ix Enter 60 | 2018-06-25 14:01:30 | S0ix Exit 61 | 2018-06-25 14:02:00 | Wake Source | Power Button | 0 =========== Lid open ================ 62 | 2018-06-25 14:02:36 | S0ix Enter 63 | 2018-06-25 14:02:56 | S0ix Exit 64 | 2018-06-25 14:03:26 | Wake Source | GPE # | 15 65 | 2018-06-25 14:03:32 | Wake Source | GPE # | 65 66 | 2018-06-25 14:03:37 | EC Event | Lid Open =========== Trackpad ================ 67 | 2018-06-25 14:04:20 | S0ix Enter 68 | 2018-06-25 14:04:33 | S0ix Exit 69 | 2018-06-25 14:05:03 | Wake Source | GPE # | 15 70 | 2018-06-25 14:05:08 | Wake Source | GPE # | 66 Change-Id: I005de58c73d00dc9d7e64f1459f6d786792b94db Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27234 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25 23:29:48 +02:00
smm-y += elog.c
soc/intel/common: Add SOC specific function to get XHCI USB info It feels appropriate to define SoC specific XHCI USB info in SoC specific XHCI source file and an API to get that information instead of defining it in elog source file. This will help in other situations where the information is required. BUG=None BRANCH=None TEST=Boot to ChromeOS. Change-Id: Ie63a29a7096bfcaab87baaae947b786ab2345ed1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34290 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03 21:02:37 +02:00
smm-y += xhci.c
soc/apollolake: Add skeleton ACPI entry Change-Id: Ib127af5392ca2b349480f5b21fad2186b444d7e6 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13348 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-10 02:06:34 +01:00
ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
ramstage-y += cpu.c
soc/intel/apollolake: Add chip initialization Change-Id: I54532b71c7649f7eeccbb2213b31418cfdbfb00c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13911 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-05 06:41:13 +01:00
ramstage-y += chip.c
soc/intel/apollolake: dump CSE status Dump the CSE status registers for potential debugging purposes. Explicitly call out manufacturing mode of the part since it's important shipping devices ensure manufacturing mode is locked down. Intel is planning on writing a common driver so a complete status -> string dumps was not done because (surprise surprise) not all the fields are equal with previous implementations. BUG=chrome-os-partner:62177 BRANCH=reef TEST=Booted and noted dump of CSE status registers. Change-Id: I71d15722bb193877f1569c1d3e7f441302f5bd14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18303 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-07 18:33:56 +01:00
ramstage-y += cse.c
soc/intel/apollolake: Enable ELOG Add in the base for ELOG for APL. Some PM events still need to be added but the basic events are logged here. This enables the basic functionality of ELOG for Apollolake. BUG=chrome-os-partner:55473 BRANCH=none TEST=Verified image boots on Amenia Change-Id: I8682293e5a55b3efb5fdd9f1be1f3e4bf8d0757c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15937 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-19 00:14:12 +02:00
ramstage-y += elog.c
soc/intel/apollolake: Write LB_FRAMEBUFFER table when appropriate FSP does not itself write the LB_FRAMEBUFFER entry, so that needs to be done in platform code. Change-Id: Ia8311da9b9a603ea9b333ea873fc26d11e182332 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14764 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-12-16 01:06:15 +01:00
ramstage-y += graphics.c
soc/intel/apollolake: Add support for GSPI BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Iec96f926ba7162074090617b7cf1c84e36b0fb37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/24906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-27 22:23:42 +01:00
ramstage-y += gspi.c
soc/intel/apollolake: Add basic HECI support Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15 02:16:35 +02:00
ramstage-y += heci.c
soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
ramstage-y += i2c.c
soc/apollolake: Add lpc device driver A dedicated pci device driver required for LPC devices as the legacy IO range need to be included to avoid IO resource confilict. Blindly set to 0~0x1000 to also avoid the IO resource of COMA/COMB/LPT/FDD and LPC.Without this driver system will have assertion on load RTC DXE driver in UEFI payloads. Change-Id: Icc462c159c2cf39cc1030d55acee79e73a6bfb35 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13356 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-13 03:19:41 +01:00
ramstage-y += lpc.c
soc/intel/apollolake: Add cbmem_top() implementation On Apollolake CPU memory mapping is similar to previous SoC, and we place CBMEM right under TSEG. Change-Id: I606f690449ba98af6e9fc3074d677c7287892164 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13883 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-03 00:09:27 +01:00
ramstage-y += memmap.c
soc/intel/apollolake: Add support for memory-mapped boot media On Apollo Lake SPI flash is memory mapped. The mapping is different to previous platforms. Only "BIOS" region is mapped in contrast to whole flash. Also, the 128 KiB right below 4 GiB are being decoded by readonly SRAM. Fail accesses to those regions, rather than returning false data. Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13706 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13 00:12:43 +01:00
ramstage-y += mmap_boot.c
soc/intel: Clean mess around UART_DEBUG Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-11-11 02:51:14 +01:00
ramstage-y += uart.c
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
ramstage-y += nhlt.c
soc/intel/apollolake: Implement SPI controller driver Implement flash read, write, and erase functionality using the hardware sequencing capabilities of the SOC. Due to changes in hardware requirements, the flash chip must be probed differently than on previous platforms (details explained in comments). Note that this is a minimal implementation, and does not provide all the bells and whistles. Change-Id: I6dcc3bc36dfce61927d126d231a16d485acb1bdc Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-25 00:08:23 +01:00
ramstage-y += spi.c
soc/intel/apollolake: Make use of Intel SPI common block TEST=Build and boot reef Change-Id: I1bb22ef1737b9e35892294ec0d66df39c546d72e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07 13:20:48 +01:00
ramstage-y += systemagent.c
soc/apollolake: Add helper functions to access Power Management Registers Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14289 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-05 05:13:34 +01:00
ramstage-y += pmutil.c
soc/intel/apollolake: Add PNP config 1. Programs PNP values for AUNIT, BUNIT & TUNIT registers as per reference code. 2. A new configuration option pnp_settings is introduced in devicetree.cb to select PNP settings among performance, power, power & performance. TEST = built and booted glkrvp, verfied that the callback gets control, verified warm and cold reboots. Change-Id: Ibd70a42c9406941c8a93cc972f22c2475e9d0200 Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-29 14:23:03 +01:00
ramstage-y += pnpconfig.c
soc/apollolake: Prevent PMC BAR reassignment during resource allocation Change-Id: Ie8e21e62ecd25f3c620a57c24948411c14c1e111 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11 22:46:28 +01:00
ramstage-y += pmc.c
soc/intel/apollolake: Add utility functions for global reset Apollolake defines Global Reset where Host, TXE and PMC are reset. During boot we may need to trigger a global reset as part of platform initialization (or for error handling). Add functions to trigger global reset, enable/disable it and lock global reset bit. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-18 00:30:13 +02:00
ramstage-y += reset.c
soc/intel/apollolake: Move XDCI in its own file Split out dual-port switching functionality into dedicated xdci.c. Change-Id: Ia58fc3fb6d017dd0c19cc450d1caba307fc89a7b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18226 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-25 06:56:36 +01:00
ramstage-y += xdci.c
soc/intel/apollolake: Add PM methods to power gate SD card This implements dynamic generation of sdcard GpioInt in SSDT. GpioInt in SSDT generation is based on the card detect GPIO if it is provided by the mainboard in devicetree. This implements GNVS variable to store the address of sdcard cd pin. GNVS used to store rxstate of the sdcard cd pin to get card presence. Add _PS0/_PS3 methods to power gate the sd card controller in S0ix and runtime PM. CQ-DEPEND=448173 BUG=chrome-os-partner:63070 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should enter S0ix and resume with no issue. Change-Id: Id2c42fc66062f0431385607cff1a83563eaeef87 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/18496 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
2017-02-25 00:37:30 +01:00
ramstage-y += sd.c
soc/intel/common: Add SOC specific function to get XHCI USB info It feels appropriate to define SoC specific XHCI USB info in SoC specific XHCI source file and an API to get that information instead of defining it in elog source file. This will help in other situations where the information is required. BUG=None BRANCH=None TEST=Boot to ChromeOS. Change-Id: Ie63a29a7096bfcaab87baaae947b786ab2345ed1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34290 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03 21:02:37 +02:00
ramstage-y += xhci.c
soc/intel: Add skeleton infrastructure for Apollolake SOC This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-06 19:33:49 +02:00
soc/intel/apollolake: utilize postcar phase/stage The current Apollolake flow has its code executing out of cache-as-ram for the pre-DRAM stages. This is different from past platforms where they were just executing-in-place against the memory-mapped SPI flash boot media. The implication is that when cache-as-ram needs to be torn down one needs to be executing out of DRAM since the act of cache-as-ram going away means the code disappears out from under the processor. Therefore load and use the postcar infrastructure to bootstrap this process for tearing down cache-as-ram and subsequently loading ramstage. Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14141 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-18 17:19:38 +01:00
postcar-y += memmap.c
postcar-y += mmap_boot.c
intel/apollolake: Calculate BIOS mmap at runtime Instead of hard-coding the BIOS region start and end addresses, read BIOS_BFPREG to determine the base and limit for the mapped BIOS region. BUG=chrome-os-partner:54563 Change-Id: Iddd3d4cc945f09e8f147e293bb9144471a6a220d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15269 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-20 08:20:43 +02:00
postcar-y += spi.c
drivers/i2c: Add i2c TPM support for different stages Change-Id: Ib0839933f8b59f0c87cdda4e5374828bd6f1099f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-02-14 16:47:12 +01:00
postcar-y += i2c.c
soc/intel/apollolake: Add reset code to postcar stage Also add a test case for that, a config taken from chromiumos with some references to binaries dropped that aren't in our blobs repo (eg audio firmware). Change-Id: I411c0bacefd9345326f26db4909921dddba28237 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29223 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22 14:54:48 +02:00
postcar-$(CONFIG_RESET_ON_INVALID_RAMSTAGE_CACHE) += heci.c
postcar-$(CONFIG_RESET_ON_INVALID_RAMSTAGE_CACHE) += reset.c
soc/intel: Clean mess around UART_DEBUG Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-11-11 02:51:14 +01:00
postcar-y += uart.c
security/vboot: Fix remaining measured boot issues Makes vboot measured boot mode available for all boards. * Increase Tegra210 and Rockchip3228 SRAM for romstage/verstage. * Add missing files for Intel apollolake and AMD stoneyridge as TPM driver target. Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-26 15:04:46 +01:00
postcar-$(CONFIG_VBOOT_MEASURED_BOOT) += gspi.c
soc/intel/apollolake: utilize postcar phase/stage The current Apollolake flow has its code executing out of cache-as-ram for the pre-DRAM stages. This is different from past platforms where they were just executing-in-place against the memory-mapped SPI flash boot media. The implication is that when cache-as-ram needs to be torn down one needs to be executing out of DRAM since the act of cache-as-ram going away means the code disappears out from under the processor. Therefore load and use the postcar infrastructure to bootstrap this process for tearing down cache-as-ram and subsequently loading ramstage. Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14141 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-18 17:19:38 +01:00
intel/apollolake: Add car.c to verstage Verstage on apollolake requires the functions defined in car.c to perform flush of l1d to l2 on loading romstage into CAR. Change-Id: I6d9a0b9dfb58c2126ad70172846e90663e588857 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15046 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01 10:55:43 +02:00
verstage-y += car.c
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
verstage-y += i2c.c
soc/intel/apollolake: Add support for GSPI BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Iec96f926ba7162074090617b7cf1c84e36b0fb37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/24906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-27 22:23:42 +01:00
verstage-y += gspi.c
soc/intel/apollolake: Add basic HECI support Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15 02:16:35 +02:00
verstage-y += heci.c
soc/intel/apollolake: add support for verstage There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 18:00:44 +02:00
verstage-y += memmap.c
verstage-y += mmap_boot.c
soc/intel: Clean mess around UART_DEBUG Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-11-11 02:51:14 +01:00
verstage-y += uart.c
soc/intel/apollolake: add support for verstage There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 18:00:44 +02:00
verstage-y += pmutil.c
soc/intel/apollolake: Add utility functions for global reset Apollolake defines Global Reset where Host, TXE and PMC are reset. During boot we may need to trigger a global reset as part of platform initialization (or for error handling). Add functions to trigger global reset, enable/disable it and lock global reset bit. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-18 00:30:13 +02:00
verstage-y += reset.c
intel/apollolake: Calculate BIOS mmap at runtime Instead of hard-coding the BIOS region start and end addresses, read BIOS_BFPREG to determine the base and limit for the mapped BIOS region. BUG=chrome-os-partner:54563 Change-Id: Iddd3d4cc945f09e8f147e293bb9144471a6a220d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15269 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-20 08:20:43 +02:00
verstage-y += spi.c
soc/intel/apollolake: add support for verstage There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 18:00:44 +02:00
soc/intel/apollolake: Bring in delta for GLK SOC Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-06 01:30:22 +02:00
ifeq ($(CONFIG_SOC_INTEL_GLK),y)
bootblock-y += gpio_glk.c
romstage-y += gpio_glk.c
smm-y += gpio_glk.c
ramstage-y += gpio_glk.c
else
bootblock-y += gpio_apl.c
romstage-y += gpio_apl.c
smm-y += gpio_apl.c
ramstage-y += gpio_apl.c
endif
soc/apollolake: Add initial cache-as-ram setup for bootblock This is the minimum setup needed to both get cache-as-ram setup and a C environment working. On apollolake, we only get 32 KiB of data loaded into an SRAM that is readonly to the main CPU. Due to this restriction we have to set CAR and a C environment very early on. Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13301 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-07 02:16:41 +02:00
CPPFLAGS_common += -I$(src)/soc/intel/apollolake/include
soc/intel/apollolake: Relocate FSP-M during insertion in CBFS Since FSP-M is run in CAR (as opposed to XIP), its default link address may need to be changed. Since cbfstool can relocate FSP blobs, take advantage of that feature. Change-Id: I4353fe09d785c090843ce25ff4e654d45c64c381 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14866 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-17 09:03:27 +02:00
# Since FSP-M runs in CAR we need to relocate it to a specific address
$(CONFIG_FSP_M_CBFS)-options := -b $(CONFIG_FSP_M_ADDR)
soc/intel/apollolake: enable cache-as-ram paging for glk Add support and enalbe cache-as-ram paging for glk to work around a cache-as-ram corruption issue. glk executes verstage, romstage, and FSP-M directly out of cache-as-ram (just like apl). However, the front end on glk is very agressive about pulling cache lines into L1I for potential execution. When the snoops hit in the L1D and the cache lines are dirty the processor writes the line back. However, there is no backing store for the dirty lines to go. As such when the line is pulled back in the value is all 0xff's, corrupting cache-as-ram. To fix the issue one needs to enable paging with NX (no execute) permissions which prevents the above actions from happening because the TLB will indicate that shouldn't be fetched into the instruction cache since data will be marked no execute. The generated page tables are added to cbfs and only added to the COREBOOT cbfs as they are only consumed in the early cache-as-ram stages. The page tables generated with: $ go run util/x86/x86_page_tables.go \ --iomap_file=src/soc/intel/apollolake/glk_page_map.txt \ --metadata_base_address=0xfef00000 \ --pdpt_output_c_file=src/soc/intel/apollolake/pdpt.c \ --pt_output_c_file=src/soc/intel/apollolake/pt.c Merged address space: 00000000d0000000 -- 00000000fef00000 UC NX : 375 big 256 small 00000000fef00000 -- 00000000fef20000 WB NX : 0 big 32 small 00000000fef20000 -- 00000000fefc0000 WB : 0 big 160 small 00000000fefc0000 -- 00000000ff000000 WB NX : 0 big 64 small 00000000ff000000 -- 0000000100000000 WP : 8 big 0 small Total Pages of page tables: 5 Pages linked using base address of 0xfef00000. BUG=b:72728953 Change-Id: Icde9cc0bf5079bb5821f4e59eb61e939c13d7062 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-18 09:05:25 +02:00
# Handle GLK paging requirements
ifeq ($(CONFIG_PAGING_IN_CACHE_AS_RAM),y)
cbfs-files-y += pt
pt-file := pt.c:struct
pt-type := raw
cbfs-files-y += pdpt
pdpt-file := pdpt.c:struct
pdpt-type := raw
endif
soc/intel/apollolake: add support for writing logical boot partition 2 On apollolake the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. There's also a sort of recovery mechanism where there is a second data structure with similar contents halfway through the "BIOS" region. This second structure is referred as the logical boot partition 2 (LBP2), and it's optionally employed. Add support for writing the LBP2 to a specified FMAP region to accommodate platforms which require it. Change-Id: I1959a790f763b409238dea6b62408b42122e590e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14924 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-20 17:48:44 +02:00
ifeq ($(CONFIG_NEED_LBP2),y)
files_added::
$(CBFSTOOL) $(obj)/coreboot.rom write -r $(CONFIG_LBP2_FMAP_NAME) -f $(CONFIG_LBP2_FILE_NAME) --fill-upward
endif
soc/intel/apollolake: add support for IFWI region On apollolake, the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. This region is referred to as the IFWI. Add support for writing the IFWI to a specified FMAP region to accommodate such platforms. Change-Id: Ia61f12a77893c3dd3256a9bd4e0f5eca0065de26 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14999 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28 21:57:05 +02:00
# Bootblock on Apollolake platform lies in the IFWI region. In order to place
# the bootblock at the right location in IFWI image -
# a. Using ifwitool:
# 1. Create IFWI image (ifwi.bin.tmp) from input image
# (CONFIG_IFWI_FILE_NAME).
# 2. Delete OBBP sub-partition, if present.
# 3. Replace IBBL directory entry in IBBP sub-partition with currently
# generated bootblock.bin.
# b. Using cbfstool:
# 1. Write ifwi.bin.tmp to coreboot.rom using CONFIG_IFWI_FMAP_NAME.
ifeq ($(CONFIG_NEED_IFWI),y)
files_added:: $(IFWITOOL)
$(IFWITOOL) $(CONFIG_IFWI_FILE_NAME) create -f $(objcbfs)/ifwi.bin.tmp
$(IFWITOOL) $(objcbfs)/ifwi.bin.tmp delete -n OBBP
$(IFWITOOL) $(objcbfs)/ifwi.bin.tmp replace -n IBBP -f $(objcbfs)/bootblock.bin -d -e IBBL
$(CBFSTOOL) $(obj)/coreboot.rom write -r $(CONFIG_IFWI_FMAP_NAME) -f $(objcbfs)/ifwi.bin.tmp --fill-upward
endif
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
# DSP firmware settings files.
soc/intel/apollolake: Fix nhlt blobs path for GLK Change-Id: Iabea32654918575c952857145ee6edb165899baf Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-01 19:01:20 +01:00
ifeq ($(CONFIG_SOC_INTEL_GLK),y)
NHLT_BLOB_PATH = 3rdparty/blobs/soc/intel/glk/nhlt-blobs
else
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
NHLT_BLOB_PATH = 3rdparty/blobs/soc/intel/apollolake/nhlt-blobs
soc/intel/apollolake: Fix nhlt blobs path for GLK Change-Id: Iabea32654918575c952857145ee6edb165899baf Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-01 19:01:20 +01:00
endif
soc/intel/apollolake: Add support for DMIC 4ch & 1ch Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27 02:31:36 +02:00
DMIC_1CH_48KHZ_16B = dmic-1ch-48khz-16b.bin
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
DMIC_2CH_48KHZ_16B = dmic-2ch-48khz-16b.bin
soc/intel/apollolake: Add support for DMIC 4ch & 1ch Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27 02:31:36 +02:00
DMIC_4CH_48KHZ_16B = dmic-4ch-48khz-16b.bin
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
MAX98357_RENDER = max98357-render-2ch-48khz-24b.bin
DA7219_RENDER_CAPTURE = dialog-2ch-48khz-24b.bin
soc/intel/apollolake: add rt5682 NHLT support Add APIs and required parameters for creating Realtek 5682 SSP endpoint in NHLT table. BUG=b:79235534 TEST=check that NHLT table defined is created properly. With the series merged & required driver support in kernel. Verify Headset Audio playback. Change-Id: Ic26a0b881f77af64ba00fd714b08c0f17c0acb3d Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/26057 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-27 11:54:45 +02:00
RT5682_RENDER_CAPTURE = rt5682-2ch-48khz-24b.bin
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
soc/intel/apollolake: Add support for DMIC 4ch & 1ch Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27 02:31:36 +02:00
cbfs-files-$(CONFIG_NHLT_DMIC_1CH_16B) += $(DMIC_1CH_48KHZ_16B)
$(DMIC_1CH_48KHZ_16B)-file := $(NHLT_BLOB_PATH)/$(DMIC_1CH_48KHZ_16B)
$(DMIC_1CH_48KHZ_16B)-type := raw
soc/intel/apollolake: Use CONFIG_NHLT_DMIC_2CH_16B for dmic Update the config variable that gets set to use DMIC 2 channel blob for intel/apollolake platforms. This flag is set in mainboard. Change-Id: Ic6deb9f08d345cc45351d61a7597bc7075ee20f9 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/16251 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-18 23:08:37 +02:00
cbfs-files-$(CONFIG_NHLT_DMIC_2CH_16B) += $(DMIC_2CH_48KHZ_16B)
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
$(DMIC_2CH_48KHZ_16B)-file := $(NHLT_BLOB_PATH)/$(DMIC_2CH_48KHZ_16B)
$(DMIC_2CH_48KHZ_16B)-type := raw
soc/intel/apollolake: Add support for DMIC 4ch & 1ch Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27 02:31:36 +02:00
cbfs-files-$(CONFIG_NHLT_DMIC_4CH_16B) += $(DMIC_4CH_48KHZ_16B)
$(DMIC_4CH_48KHZ_16B)-file := $(NHLT_BLOB_PATH)/$(DMIC_4CH_48KHZ_16B)
$(DMIC_4CH_48KHZ_16B)-type := raw
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
cbfs-files-$(CONFIG_NHLT_MAX98357) += $(MAX98357_RENDER)
$(MAX98357_RENDER)-file := $(NHLT_BLOB_PATH)/$(MAX98357_RENDER)
$(MAX98357_RENDER)-type := raw
cbfs-files-$(CONFIG_NHLT_DA7219) += $(DA7219_RENDER_CAPTURE)
$(DA7219_RENDER_CAPTURE)-file := $(NHLT_BLOB_PATH)/$(DA7219_RENDER_CAPTURE)
$(DA7219_RENDER_CAPTURE)-type := raw
soc/intel/apollolake: add rt5682 NHLT support Add APIs and required parameters for creating Realtek 5682 SSP endpoint in NHLT table. BUG=b:79235534 TEST=check that NHLT table defined is created properly. With the series merged & required driver support in kernel. Verify Headset Audio playback. Change-Id: Ic26a0b881f77af64ba00fd714b08c0f17c0acb3d Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/26057 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-27 11:54:45 +02:00
cbfs-files-$(CONFIG_NHLT_RT5682) += $(RT5682_RENDER_CAPTURE)
$(RT5682_RENDER_CAPTURE)-file := $(NHLT_BLOB_PATH)/$(RT5682_RENDER_CAPTURE)
$(RT5682_RENDER_CAPTURE)-type := raw
soc/intel/apl: Hook microcode updates up Only tested on APL. Change-Id: I53f680fc4342a9bd1cd0ba9d72e025995e25f7f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-11-14 17:46:14 +01:00
ifeq ($(CONFIG_SOC_INTEL_GLK),y)
# Gemini Lake B0 (706a1) only atm.
Use 3rdparty/intel-microcode Instead of maintaining this in 3rdparty/blobs use the 3rdparty/intel-microcode which is maintained by Intel. This allows for some finegrained control where family+model span multiple targets. Microcode updates present in 3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those contain updates not present in the Intel repo. Those are presumably early CPU samples that did not end up in products. The following MCU are get a new revision: old: sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552 sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528 sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288 sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312 sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728 sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384 sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336 sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280 sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304 sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432 sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328 new: sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-17 10:50:47 +02:00
cpu_microcode_bins += $(wildcard 3rdparty/intel-microcode/intel-ucode/06-7a-*)
soc/intel/apl: Hook microcode updates up Only tested on APL. Change-Id: I53f680fc4342a9bd1cd0ba9d72e025995e25f7f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-11-14 17:46:14 +01:00
else
# Apollo Lake 506c2, B0 (506c9) and E0 (506ca) only atm.
Use 3rdparty/intel-microcode Instead of maintaining this in 3rdparty/blobs use the 3rdparty/intel-microcode which is maintained by Intel. This allows for some finegrained control where family+model span multiple targets. Microcode updates present in 3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those contain updates not present in the Intel repo. Those are presumably early CPU samples that did not end up in products. The following MCU are get a new revision: old: sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552 sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528 sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288 sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312 sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728 sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384 sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336 sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280 sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304 sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432 sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328 new: sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-17 10:50:47 +02:00
cpu_microcode_bins += $(wildcard 3rdparty/intel-microcode/intel-ucode/06-5c-*)
soc/intel: Add skeleton infrastructure for Apollolake SOC This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-06 19:33:49 +02:00
endif
soc/intel/apl: Hook microcode updates up Only tested on APL. Change-Id: I53f680fc4342a9bd1cd0ba9d72e025995e25f7f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-11-14 17:46:14 +01:00
endif # if CONFIG_SOC_INTEL_APOLLOLAKE
Reference in a new issue Copy permalink