When entry to romstage is via cpu/intel/car/romstage.c
BIST has not been passed down the path for sometime.
Change-Id: I345975c53014902269cee21fc393331d33a84dce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This is based on the hatch variant
BUG=b:138879565
TEST=FW_NAME="akemi" emerge-hatch coreboot depthcharge intel-cmlfsp
chromeos-bootimage look for image-akemi.*.bin generated under the
/build/hatch/firmware/
Change-Id: I1a868839e2c598f8052d37c99713bc58b21e887c
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Disable SATA controller and SATA port 1 for eMMC SKUs
BUG=b:132918661
TEST=Verify SSD is disabled when SKU ID = 2/4/21/22
Change-Id: I6d95ff94b079a564f74c19739370101899843f00
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34789
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. Disable eMMC controller for new SKU ID 23 and 24
2. Disable HS400 mode
BUG=b:132918661
TEST=Verify eMMC is disabled when SKU ID = 1/3/23/24
Change-Id: I0d893f0f7339e7b1a1e6b56d1598c0a361c8d604
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The src/lib/edid now supports reporting manufacturer name so we should
define that in MIPI panels and print out in initialization.
BUG=None
TEST=emerge-kukui coreboot; boots properly
Change-Id: If844da84ecca31307127b14c66bbe17c408699f3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The fixed size of init command in lcm_init_table is wasting lots of
space and we should change to packed array since the command buffer
already provides length information.
With this change, BOE panel init commands have been reduced from 4848
bytes to 1309 bytes.
BUG=b:80501386,b:117254947
TEST=emerge-kukui coreboot chromeos-bootimage; Boots properly
Change-Id: I359dde8e6f2e1c0983f4677193bb47a7ae497ca6
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34778
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Kukui variants may have eDP panels connected via a PS8640 MIPI bridge
which we may retrieve EDID dynamically.
BUG=b🅱️137517228
TEST=emerge-jacuzzi coreboot chromeos-bootimage; boots and see display.
Change-Id: I85aac5255e6a3e6019299670486214ecffbf9801
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34516
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Declare the following panel for Kodama:
- BOE TV101WUM-N53
BUG=b:138156559
TEST=builds Kodama image and working properly
Change-Id: I129cb6bf084b76da3ad33b7a19e38e884442b1aa
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34505
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Support Kukui rev 2 panel (via SSD2858).
BUG=b:129299873
BRANCH=none
TEST=Build as Kukui and boots on Rev 2 unit.
Change-Id: Icc16c4297eb3c6b6a4770a36661a2e3cab418048
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Declare the following panels for Krane:
- BOE TV101WUM-NL6
- AUO KD101N80-45NA
The edid info and init command are from:
https://crrev.com/c/1565758
BUG=b:129299873
BRANCH=none
TEST=Builds krane image and boots properly.
Change-Id: Id19c6c2b4c1c728c39aa26301adf7d6fb5046403
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Many devices in Kukui family will be using MIPI panels, which needs
hard-coded EDID and initialization commands. And because each device may
have its own layout and ID, there should be very few devices sharing
same panel configuration. As a result, we want to put panel data (EDID
and init commands) into board-specific modules, provided by
`get_panel_description` function.
The panel numeric ID is identified by ADC 2, and is currently available
as higher 4 bits of sku_id(). After ID is retrieved, the
get_panel_description should return a reference to the EDID and table of
init commands. The default implementation is to simply return NULL, and
the data for real devices should be provided by panel_*.c in further commits.
BUG=b:80501386,b:117254947
BRANCH=none
TEST=boot correctly on Kukui
Change-Id: I19213aee1ac0f69f42e73be9e5ab72394f412a01
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
For systems with real MIPI panels (8173/oak was using PS8640 eDP
bridge), we have to send DCS commands to initialize panel.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Ie7c824873465ac82a95bcb0ed67b8b9866987008
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34773
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates the Atmel touchscreen ACPI node to use PRP0001 as
_HID to allow OF-style compatible string matching for enumeration.
Reason for this change: Atmel touchscreen driver in Linux kernel looks
for "compatible" property to decide if it is okay to attach to the
device. This check seems to be a protection against old firmware in
the field that do not have the right properties.
BUG=b:129162037
TEST=Verified that touchscreen works on Kohaku.
Change-Id: I6d027f8533494e903efd1da8da1fa273a97fe9b2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The default is DMIC0 on, but Kohaku is also using DMIC1
BUG=b:133282247
BRANCH=None
TEST=arecord -D hw:0,1 -r 48000 -c 4 -f s32 4dmic.wav
make sure 4 channels recording work
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Change-Id: I2dd573e1634516bcf9876bedb92b7d9148bb0e6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34692
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Kohaku V24 schematic adds two additional temperature sensors
to the EC. Add these to the DPTF tables.
Cq-Depend: chromium:1742914
BRANCH=none
BUG=b:138578073
TEST=Rebuild EC and BIOS, look for new thermal sensors in kernel.
1. Build EC
``cd ~/trunk/src/platform/ec``
``make -j BOARD=kohaku``
2. Program EC
``./util/flash_ec --board=kohaku``
3. Reboot device
4. Rebuild BIOS
``cd ~/trunk/src/third_party/coreboot``
``FEATURES="noclean" FW_NAME=kohaku emerge-hatch chromeos-ec depthcharge
vboot_reference libpayload coreboot-private-files intel-cmlfsp
coreboot-private-files-hatch coreboot chromeos-bootimage``
5. Use flashrom to program the BIOS
6. Reboot device
7. Log into the root console (ctrl-alt-F2 or servo)
8. Example thermal sensor information
``grep . /sys/class/thermal/t*/type``
Look for "TSR0" through "TSR3" in the output.
Change-Id: Ib8f38beae6392855927ce1249c229d7a114c72b2
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34765
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Oops, I missed this in the last CL.
The pin needs to be configured as owned by GPIO, so that the kernel
driver can bind it with an IRQ.
BUG=b:139165490
TEST=Ensure kernel nastygram about inability to claim the IRQ is gone
Change-Id: I26c08d75d8b4e3b834db6e90868239899605fa5b
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
One case slipped past the review and rebase of 733c28fa42
(soc/intel/{cnl,icl}: Use new power-failure-state API).
Change-Id: Id01df30d10e202e9672bf5be799a84f4f202fe24
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34812
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pmc_soc_restore_power_failure() is only called from SMM, so add
`pmc.c` to the `smm` class. Once all platforms moved to the new
API, it can be implemented in a central place, avoiding the weak-
function trap.
Change-Id: Ib13eac00002232d4377f683ad92b04a0907529f3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34726
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The 'dual DSI mode' was never used by any real boards running coreboot
and is introducing lots of complexity when it comes to refactoring.
In order to create a common display stack for MTK SOCs, we want to first
drop dual DSI mode so 8173 and 8183 DSI/DDP implementation will be more
similar to each other.
BUG=b:80501386,b:117254947
TEST=emerge-oak coreboot
Change-Id: I357c30cc687803ca8045d0b055dec2e22eef4291
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34693
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Sarien.
Change-Id: Ibc336be0523ff4e65a818474907faf20fc417ff4
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Arcada.
Change-Id: I1915b974b10638b0f6ab97c6fb9b7a58d2cabc59
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There was the potential for misuse of the override early GPIO table,
because if the override early GPIO table did not have a corresponding
entry in the base table, it would not get overridden, and there was
no way to know except manual inspection (this has already happened
here), so now all hatch mainboards are required to explicitly list out
all of their required early GPIOs.
TEST=booted several hatch boards, verified that they can communicate
with TPM and successfully train memory
Change-Id: I0552b08a284fd6fb41a09fef431a0d006b0cf0bd
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The pinctrl driver in the linux kernel automatically turns off SCI
routing for all GPIOs exported via ACPI, so this patch sets up
dual-routing of the EMR_GARAGE_DET signal so that one can be used
for IRQs and one for the SCI wake.
Change-Id: Iadeb4502c5a98a72ba651bdcad626609656c196f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34780
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The touchscreen controller was never added to the device tree, and the
next board rev will have this IC connected. Set it up in the device tree
with conservative power resource timings from the datasheet.
BUG=b:138869702
BRANCH=none
TEST=compiles; current board rev does not have touch IC
Change-Id: I759fb32f31c8eee0e6bd664c6a82308354ef5d08
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Enabling stylus pen device and pen_eject event.
- Adding enable_gpio for power sequencing
- Configuring GPP_H4 and GPP_H5 as native function
- Adding PENH device node for pen ejection event
BUG=b:137326841
BRANCH=none
TEST=Verified pen input operation and pen_eject event (pop-up and wake
from s0ix on pen ejection)
Change-Id: Ic252a1f90c0fc6cb9b1e426d75a8b503824681f3
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Vortininja needs different SAR values than meep. Use sku-id to load SAR values.
BUG=b:138261454
BRANCH=octopus
TEST=build and verified SAR values by sku id
Change-Id: I7b3ab51e1d6cada4faaba1b9d72bd9eacf6b04dd
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
This patch makes SPKR_PA_EN PIN output and high for boot beep
to work in pre-os environment.
BUG=b:135104721
BRANCH=NONE
TEST=Boot Beep is working with required ALC1011 depthcharge code
changes.
Change-Id: I012462f93e9e2bcafe5f18ce7d04e3fcd1db9ffa
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Drallion is a new mainboard using Intel Comet Lake SOC. As a starting
point, I took mainboard/sarien as the reference code and modified WHL
to Comet Lake.
BUG=b:138098572
Test=compiles
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com>
Change-Id: I541952a4ef337e7277a85f02d25979f12ec075c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34497
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Increase reset delay to 120ms of touchscreen to meet wacom touchscreen
T4 specification and resolve re-bind hid over i2c driver failed after
touchscreen firmware auto update.
BUG=b:132211627
TEST=Stress touchscreen firmware auto update 200 times and not found
re-bind driver failed.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I488660aefdc6df27077efc7fec2f3b99adbaef9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com>
Reviewed-by: Nick Crews <ncrews@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
droid/blorb needs to use different SAR values than bobba. Use sku-id to load the SAR values.
BUG=b:138091179
BRANCH=octopus
TEST=build and verify SAR load by sku-id
Change-Id: I71b5d69ffbba82018a682202df73b604332dd9e7
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34542
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BRANCH=none
BUG=b:138152075
TEST=Build for cometlake board with the PmTimerDisabled policy in
devicetree set to 1.
With PmTimerDisabled = 0
>> iotools mmio_read8 0xfe0018fc
0x00
With PmTimerDisabled = 1
>> iotools mmio_read8 0xfe0018fc
0x02
Bit 1: ACPI Timer Disable (ACPI_TIM_DIS): This bit determines
whether the ACPI Timer is enabled to run.
- 0: ACPI Timer is enabled
- 1: ACPI Timer is disabled
Change-Id: I83f49505a804c99d7978e5d541ea9fe8ead9b88f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Add rise time / fall time to I2C config in device tree to ensure I2C
CLK runs accurately at I2C_SPEED_FAST (400 kHz).
BUG=b:138258384
BRANCH=none
TEST=probe I2C0/I2C2/I2C3 SCL on Kohaku board, verify all of them run
at 395-399 kHz.
Change-Id: Id98079e717f0db3fdcb88f85e45693925d11d7fd
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34559
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Moving these to bootblock as we are seeing some instances where
devices are rebooting into the recovery broken screen with the 0x5a error (no
bootable storage device in system). This needed to be done for KBL
platforms and never got transferred to hatch.
Please reference https://review.coreboot.org/c/coreboot/+/23647
BUG=b:137681648
BRANCH=None
TEST=Run autotest faft_bios and faft_ec suites
Change-Id: I8cf09c26d77d890f5d0490709504e9edf485a93f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34484
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown
when S0ix is enabled.
BUG=133345634
BRANCH=None
TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Hatch.
Change-Id: Ib20fae04080b28c6105e5a187cc5d7a55b48d709
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33147
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds a user selectable option to enable all WiFi SAR
configs that apply to hatch.
BUG=b:138177048
Change-Id: I4b72f90896841e7c556d4a1b8cdad8ca89d01021
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Kyösti Mälkki