It's already disabled by FSP default but disable VMD by devicetree
to remove dependency with FSP default setting.
BUG=None
Branch=None
Test=Build TGLRVP and boot up and check FSP log for checking VMD is
disabled.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ief81fe481b94abed9754881cf1f454999fafa52e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41061
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update processor power limit configuration parameters based on
common code base support for Intel Apollo Lake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on octopus system
Change-Id: I609744d165a53c8f91e42a67da1b972de00076a5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41233
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds FSP UPD D3HotEnable and D3ColdEnable for configuration.
D3Hot low power mode support is for TCSS xhci, xdci, TBT PCIe root
ports and DMA controllers. D3Cold is lower mode for TBT PCIe root
ports and DMA controllers with D3Hot->D3Cold transition.
BUG=🅱️146624360
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I6782cde6a1bfe13f46e75db8c85537c6d62f5d41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
After removal of CAR_MIGRATION there are no more reasons
to carry around ENV_STAGE_HAS_BSS_SECTION=n case.
Replace 'MAYBE_STATIC_BSS' with 'static' and remove explicit
zero-initializers.
Change-Id: I14dd9f52da5b06f0116bd97496cf794e5e71bc37
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update processor power limit configuration parameters based on
common code base support for Intel Cannonlake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on drallion system
Change-Id: Iac6e6f81343fcd769619e9d7ac339430966834f6
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
CPU to PCH method refers to PCH ACPI operation region which was wrongly
defined as SystemMemory and PCH_PWRM_BASE_ADDRESS. Change the operation
region to be SystemIO and ACPI_BASE_ADDRESS.
BUG=b:156530805
TEST=Built and booted to kernel.
Signed-off-by: John zhao <john.zhao@intel.com>
Change-Id: Ifa291a993ec23e1e4dfad8f6cdfabc80b824d20c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Intel introduced the UPD VrPowerDeliveryDesign with Cannon Lake. The
BIOS needs to program VrPowerDeliverDesign configuration per platform
according to the platform capabilities to avoid incorrect
electrial/power parameters. This is only added for Cannon Lake.
Refer to document 599797 for more details.
Change-Id: I89b8dceb40fa6a9dc67b218e91bf728ff928b5a0
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41081
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some existing devicetrees were manually adapted to anticipate
root-port switching. Now, their PCI-device on/off settings should
just reflect the `PcieRpEnable` state and configuration happens
on the PCI function that was assigned at reset.
Change-Id: I4d76f38c222b74053c6a2f80b492d4660ab4db6d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
By default legacy ISA IRQs use edge triggering. Depending on what
devices are used the IRQ types might need to be changed. We add a
setting to the device tree to allow the mainboard to configure the IRS
IRQs.
BUG=b:145102877
TEST=Booted trembyle and was able to use the keyboard.
Change-Id: Ie95e8cc7ca835fb60bee8f10d5f28def6c2801dc
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2033493
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Current Interrupt setting use 2nd parameters as device function number.
Correct as interrupt pin number according to _PRT package format.
{Address, pin, Source, Source index}
Reference:
- ACPI spec 6.2.13 _PRT
BUG=None
BRANCH=None
TEST=Build and boot JSLRVP Verify Interrupt mappings are same as PCI
INTR(0x3C) register and no interrupt storm is seen
Change-Id: I21462c6befea310a49eecf9ad1b5c8770eccd5bd
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41404
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Intel Tigerlake SoundWire controller has 4 master links which
are configured differently depending on the external crystal oscillator
which is connected to the PCH.
This function will read the PCH PMC EPOC register to determine the
frequency and then fill out the master link entries with the correct
table values.
The frequency is also provided directly in a custom "ip-clock" property
which will be added to the link descriptor and passed to the OS driver
so it can know the clock rate of the master.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I98b7df21210c29cd8defeff648f2c2207d629295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The PMC EPOC register indicates which external crystal oscillator is
connected to the PCH. This frequency is important for determining the
IP clock of internal PCH devices.
Add definitions that allow this register to be read and extract the
crystal frequency, and a helper function to extract and return this
as the defined enum.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I959fe507f3dbf93b6176b333a9e725ed09f56328
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40887
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function adds support for gpio_configure_pads_with_override
which:
1. Takes as input two GPIO tables -- base config table and override
config table
2. Configures each pad in base config by first checking if there is a
config available for the pad in override config table. If yes, then
uses the one from override config table. Else, uses the base config to
configure the pad.
BUG=b:153456574
TEST=Build and boot dalboz
BRANCH=none
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I07bfe82827d1f7aea9fcc96574d6deab9e91d503
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153423
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41576
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This node is required so we can add child ACPI nodes.
BUG=b:147042464
TEST=Boot trembyle and confirm Bus A has a firmware node
$ cat /sys/bus/pci/devices/0000\:00\:08.1/firmware_node/path
\_SB_.PCI0.PBRA
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I18144a69ed28a913bc9a2523d69edf84a1402e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is a squash of the following commits. The original values were
wrong, and had confusing naming.
soc/amd/picasso: Get rid of *_DEVID from pci_devs.h
Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I203449499840bf0a6df8bd879fb7d2e75a16b284
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153714
src/amd/picasso: Update PCI bridge devices
Orignal-Change-Id: I1fa9d52ce113eacdc5c9ba31ab46b6428a7d6ca9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Zork: Reorganizing ACPI and adding PCI bridge configs
Signed-off-by: Pranay Shoroff <pshoroff@google.com>
Original-Change-Id: I1e2095567525f302dfd0bce8e39001250523180b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2063536
soc/amd/picasso: Fix soc_acpi_name() to use devfn instead of devid
Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I2486e7e0059e0528f53d5a158c9328636563fe93
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153712
BUG=b:147042464
TEST=Build trembyle and boot to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I91bf7f9edcddf03027f8fdcaadf4e290ece10df5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
New information indicates the PSP expects the APOB NV region
populated for all types of boot, and this is not a feature only
used for S3. Switch over to using the MRC_CACHE flash region.
Remove the Kconfig symbols for the APOB_NV base and size. Override
the MRC_CACHE_SETTINGS_CACHE_SIZE to ensure the default maintains the
minimum required size. Use the generated (or mainboard-specified)
fmap.fmd file as an input for amdfwtool and properly match the
flash region.
Change the original naming for the APOB destination, which matched the
PSP spec's field name, to PSP_APOB_DESTINATION. This should be more
intuitive for a source code reader. The APOB address is the location
in DRAM where the PSP puts its output block.
BUG=b:147042464, b:153675914
TEST=Boot trembyle
Original-Change-Id: Ia5ba8646deec2bd282df930f471738723063eef8
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2080375
Original-Change-Id: I972d66f1817f86ff0b689f011c0c44c3fe7c8ef7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2053312
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I4550766ece462b65a6bfe6f1b747343e08e53fe5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
soc/i2c.h gets included indirectly via chip.h and removing the chip.h
in 73716d0e92 broke the build. chip.h got
added back, but including soc/i2c.h directly fixes the underlying issue.
Change-Id: Ic84f7b6b4447b7c335a51dc604daf8924851e555
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The audio devices are currently set to enable static devices at their
own level, but in order to supported nested SoundWire devices these
drivers must instead use scan_static_bus. Without this change the
device tree code will not look at children of these devices.
After this change the audio device can have nested devices:
device pci 1f.3 on
chip drivers/intel/soundwire
device generic 0 on end
end
end
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ibb716fbd9ffdc45f2c4bbe5e81f420ec2b13483c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add ACPI device names for TCSS devices which were not already defined
which match those declared in the DSDT at acpi/tcss.asl.
Change-Id: I6a79da7dd78c73345986c12d6ffe467cd4322e05
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The CA vref should alway select range[1]. But in fast calibration flow,
we missed the range selection and caused the CA vref to use the range[0] value.
The DQ vref should select correct range that corresponds to current frequency,
that is for 1600Mbps, 2400Mbps to select range[1], for 3200Mbps and 3600Mbps
to select range[0].
Refer to the 'JESD209-4 - Low Power Double Data Rate 4X(LPDDR4X).pdf',
used MR12 to set Vref(CA) levels, used MR14 to set VREF(DQ) levels.
MR12 range[0] values from 15.0% to 44.9%, range[1] values from 32.9% to 62.9%,
MR14 range[0] and range[1] values same as MR12.
BUG=b:153614919
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Ie7680b1bf0c29c946d18e3b27626ce6f31c4216b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40525
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pmc.c was included in the SMM object, but only needed the one function,
pmc_soc_set_afterg3_en. pmutil.c was already doing power management-
related functionality, and was included in SMM, so moving
pmc_soc_set_afterg3_en to pmutil.c allows pmc.c to be removed from the
SMM build.
Change-Id: I87f65fd10d35f1f75516e804501d5319b81a0383
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41407
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Historically in coreboot, the PMC's fixed PCI resources were described
by the System Agent (the MMIO resource), and eSPI/LPC (the I/O
resource). This patch moves both of those to a new Intel SoC-specific
function, soc_pmc_read_resources(). On TGL, this new function takes care
of providing the MMIO and I/O resources for the PMC.
BUG=b:156388055
TEST=verified on volteer that the resource allocator is aware of and
does not touch these two resources:
("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0
flags f0000200 index 0
PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff
flags c0000100 index 1")
Also verify that the MEM resource is described in the coreboot table:
("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved")
Verified the memory range is also untouchable from Linux:
("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved")
Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update processor power limit configuration parameters based on
common code base support for Intel Tigerlake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on volteer system
Change-Id: Iccd387d78bb45ca3de73f531a901d1d3f793d7bd
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39345
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove unused processor power limit configuration parameter
and function call based on common code base support for
Intel Icelake SoC based platform.
BRANCH=None
BUG=None
TEST=Built for icelake based dragonegg board.
Change-Id: Id8923f2c176092b6f7acfbfb079587f88258dce8
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41236
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order for the SOC to be able to control the Aux line orientation for
Type-C ports that do not have a retimer, the IomTypeCPortPadCfg UPD needs
to be configurable through devicetree to correctly set the GPIO pins that
the SOC should use to flip orientation.
BUG=b:145220205
BRANCH=NONE
TEST=booted Volteer proto 2 and verified that the AUX channels flip
when the cable is flipped
Change-Id: I2e48adb624c7922170eafb8dfcaed680f008936e
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40244
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add method acpi method GPID to return the GPIO PCR port ID.
This method is further planned to be used for GPIO power
management configuration.
TEST=Build waddledoo board
Change-Id: Ic45b40bbe39e303cddcc82e0e848786b7311ab64
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: I11b3ef8deda21930998471ab6e712da4c62f5b02
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change updates systemagent.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for auron.
Change-Id: I479bb6cb7ed4c9265325c7c8621f03454f21f467
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: I2ff7a30fabb7f77d13acadec1e6e4cb3a45b6139
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change updates systemagent.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for soraka.
Change-Id: If8d8dd50af9a79d30f54e98f7f2fe7ce49188763
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CB:41454 updated northbridge.asl to ASL2.0 syntax. During this, GPCL
was incorrectly updated to use << (ShiftLeft) instead of >>
(ShiftRight). This change fixes the error in GPCL by updating it to
use >> (ShiftRight).
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for hatch.
Change-Id: I36469cb3b0bcc595acf0e43808d6a574986cad68
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41519
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add option to change bootloader file.
BUG=b:149934526
TEST=Change option and verify new bootloader file is used. Using the
amd_blobs I can only boot using PspBootLoader_test_RV_dbg.sbin.
Change-Id: Ib6597f7d4ffa0d48aead6974bd7111c987418f20
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2067598
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The PCI interrupt devices were only partially implemented.
* Lacked support for _DIS to disable the bus. Something the kernel does
while booting.
* Lacked support for APIC vs PIC. This means the devices can only be
used when using the PIC. By looking at the PMOD variable we can handle
both PIC and APIC. This means we can stop hard coding the PCI interrupt
numbers in the ACPI tables.
* I removed INT[E-H] since they are not used.
BUG=b:139429446, b:147042464
BRANCH=none
TEST=Boot with both the APIC and PIC and saw that the link devices work
as expected:
PIC MODE:
[ 1.959345] ACPI: PCI Interrupt Link [IRQA] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15)
[ 2.007344] ACPI: PCI Interrupt Link [IRQB] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15)
[ 2.056344] ACPI: PCI Interrupt Link [IRQC] (IRQs 1 3 4 5 6 7 8 9 10 11 12 *14 15)
[ 2.104344] ACPI: PCI Interrupt Link [IRQD] (IRQs 1 3 4 5 6 7 8 9 10 11 12 14 *15)
[ 13.752676] PCI Interrupt Link [IRQA] enabled at IRQ 6
[ 13.816755] PCI Interrupt Link [IRQD] enabled at IRQ 15
[ 27.788798] PCI Interrupt Link [IRQB] enabled at IRQ 6
[ 27.852873] PCI Interrupt Link [IRQC] enabled at IRQ 14
APIC MODE:
[ 19.311764] ACPI: PCI Interrupt Link [IRQA] (IRQs *16 17 18 19 20 21 22 23)
[ 19.374765] ACPI: PCI Interrupt Link [IRQB] (IRQs 16 *17 18 19 20 21 22 23)
[ 19.438770] ACPI: PCI Interrupt Link [IRQC] (IRQs 16 17 *18 19 20 21 22 23)
[ 19.501764] ACPI: PCI Interrupt Link [IRQD] (IRQs 16 17 18 *19 20 21 22 23)
[ 34.719072] PCI Interrupt Link [IRQA] enabled at IRQ 23
[ 34.798994] PCI Interrupt Link [IRQD] enabled at IRQ 22
[ 66.469510] PCI Interrupt Link [IRQB] enabled at IRQ 21
[ 66.542395] PCI Interrupt Link [IRQC] enabled at IRQ 20
Change-Id: I1bb84813b65c89b4b5479602be3e9a9fedb7333d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095683
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The _PIC method sets the interrupt model (PIC or APIC). It needs to be
defined at the root level for the kernel to find it. Previously this
method was never getting called, so we were always stuck in APIC mode.
BUG=b:139429446, b:147042464
BRANCH=none
TEST=Saw the method getting called
[ 1.251774] ACPI Debug: "PIC MODE: 0000000000000001"
Change-Id: Idd5e9646df8d56e7cbec2be8b4016c36d81e5fb8
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095682
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Remove the Kconfig options for per board socket type selection and use
the runtime detection instead.
Change-Id: I82cf922661c24e2a529fa4927893727b643660e3
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41518
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add telemetry setting for SDLE testing
BUG=b:147570294
TEST=Build Morphius and check the setting was been applied
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If4bb75eeaaa68b2c5a6a36c28c34fb338be65851
Reviewed-on: https://chromium-review.googlesource.com/2056885
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Tested-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
