Refactor I2C code which will be reused among similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot
Change-Id: I407d5e2a9eb29562b40bb300e39f206a94afe76c
Signed-off-by: qii wang <qii.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Clear the GPI Interrupt Status & Enable registers to prevent any
interrupt storms due to GPI.
BUG=b:138282962
TEST=Ensure that the Interrupt status & enable registers are reset
during the boot-up when the system is brought out of G3, S5 & S3. Ensure
that the system boots fine to ChromeOS.
Change-Id: I2185355d0095601e0778b6bf47ae137cc53e4051
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Moving these to bootblock as we are seeing some instances where
devices are rebooting into the recovery broken screen with the 0x5a error (no
bootable storage device in system). This needed to be done for KBL
platforms and never got transferred to hatch.
Please reference https://review.coreboot.org/c/coreboot/+/23647
BUG=b:137681648
BRANCH=None
TEST=Run autotest faft_bios and faft_ec suites
Change-Id: I8cf09c26d77d890f5d0490709504e9edf485a93f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34484
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ...
- adds the PCH ID for C232 chipset,
- renames "Premium" chipset to "HM170" (because of same IDs),
- reorders the Skylake-H PCH IDs ascending by hex values.
Used documents:
- Intel 332690-005EN
Change-Id: I859975fe7bcd3c10dead8fe150a2fbead9c64a51
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add the Command Response Buffer which is defined in the TPM 2.0 Specs.
CRB can be specified with MAINBOARD_HAS_CRB_TPM, even though it is
actually SoC/SB specific.
Change-Id: I477e45963fe3cdbc02cda9ae99c19142747e4b46
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Add function which checks if Intel Platform Trust Technology / Intel
integrated TPM is enabled/active.
Change-Id: If93bb5e1a3a59b5045f4e44359683876fb387a71
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34380
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new bootmem memory type OpenSBI.
It's similar to BL31 on aarch64.
Required for OpenSBI integration.
Change-Id: I5ceafd5a295f4284e99e12f7ea2aa4c6d1dbb188
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Stoney Ridge is family 15h models 70h-7Fh, Merlin Falcon is family 15h models
60h-6Fh. Add changes based on config parameter SOC_AMD_MERLINFALCON to make
the code backward compatible with Merlin Falcon.
BUG=none.
TEST=Tested later with padmelon board.
Change-Id: I00fe832324500bcb07fca292a0a55f7258a2d82f
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33624
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The initial implementation was assigning the devfn as PCI device
reference directly which was incorrect.
Change-Id: Iad57e9bc6b2acf1823ee38116aea8a93feece6f9
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
It's better to format lists with bullet points.
Change-Id: I503ef2dea9146d67c220236b8a5b64c2ba2d794f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34504
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown
when S0ix is enabled.
BUG=133345634
BRANCH=None
TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Hatch.
Change-Id: Ib20fae04080b28c6105e5a187cc5d7a55b48d709
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33147
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device (B0: D18: F0) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE.
Change-Id: Ibd1e669fcbfe8dc6e6e5556aa5b1373ed19c3685
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33129
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We keep a mirror in case any of the originals disappear, but we also
have to remember to update it.
Change-Id: Ib4be91d1d508d3d5dba7ace1d167d8e528d58b3d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
There were two hooks in the boot state machine which dumped the ME
status to the debug UART, which is unnecessary. Removed the hook
for the BS_OS_RESUME_CHECK state, leaving just BS_PAYLOAD_LOAD, which
is called before FspNotifyEndOfFirmware, as required.
BUG=b:138463532
BRANCH=none
TEST=Boot up, check cbmem to ensure the ME status messages are
only printed one time.
Change-Id: I86bc6e33de4096f33023730ffabb25715c985de0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Id3382d19088cba2703350339b0bd0cfb3c0e63b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change adds a user selectable option to enable all WiFi SAR
configs that apply to hatch.
BUG=b:138177048
Change-Id: I4b72f90896841e7c556d4a1b8cdad8ca89d01021
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The amdht code currently relies on an idiosyncratic ASSERT() macro,
which actually doesn't do anything right now, and even it did would only
print a janky error message. Replace this with the normal ASSERT() macro
from <assert.h>. The default behaviour now is to print an error message
but do nothing else, and failed assertions will only halt if you enable
FATAL_ASSERT, in which case, well, you asked for it.
Change-Id: I6db7565171a345f9afbc9fb37cff8fda58f942df
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402076
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There will be a possible out of bounds array access if
power_limit_1_time == ARRAY_SIZE(power_limit_time_sec_to_msr), so
prevent that in the index check. This issue was fixed for other cpus in
commit 5cfef13f8d (cpu/intel: Fix out-of-bounds read due to off-by-one
in condition). Based on the discussion for that commit, also remove the
magic constant 28 in favour of the index of the last array element.
Change-Id: Ic3f8735b23a368f8a9395757bd52c2c40088afa1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229673
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The bdk_phys_to_ptr() function converts a uint64_t address to a void *
pointer. Judging by the comments, the old implementation had a check
that would refuse to convert a null pointer, which required several
workarounds when trying to convert the address 0 to a pointer. This
isn't the case for coreboot though, which implements this function
as a simple (void *) cast, so we can remove the old workarounds.
Change-Id: I6537d1699e6726c1fb155d69a51e14da856232de
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393962
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Ensure that best_en_idx is within bounds before accessing the _en array.
Change-Id: Ifa6259e28875a8cf8199896bda7982370ccaa277
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393971
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34593
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The total number of errors is only needed after a final tuning run at the
end of this function, so we can remove this unneeded store for earlier
runs.
Change-Id: I62adb38ccba98d90bcf8ccd13998762b9b694111
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393967
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The virt machine is special as it doesn't emulate flash and it puts
the coreboot.rom at start of DRAM. The payload loader doesn't know
about CBFS in DRAM and overwrites the CBFS while decompressing
payloads, resulting in undefined behaviour.
Mark the region as SRAM to make sure the payload won't
overwrite the CBFS while decompressing.
As payload is always decompressed to DRAM, it wouldn't touch
SRAM memory regions.
Change-Id: I36a18cb727f660ac9e77df413026627ea160c1e1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Fix regression introduced in bd4bcab
"lib: Rewrite qemu-armv7 ramdetect".
The detected DRAM size is in MiB, thus needs to adjusted accordingly
before passed to ram_resource.
Wasn't seen earlier as everything works, except payload loading.
Change-Id: I4931372f530e7b4e453a01e5595d15d95a544803
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
It would be useful if we have at least one "new" board on which we
actually built vboot, in order to notice if something breaks.
Change-Id: I16c7867e3f0f4e1f2e6ae3918c30789e39881b85
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This reverts commit 598af2e2c2.
Reason for revert: This commit breaks every board with VBOOT enabled
if the platform is apollolake, broadwell, skylake, baswell, baytrails
or icelake. The reason is, that the SoC selects
VBOOT_MUST_REQUEST_DISPLAY by default, and this has a dependency now
on VBOOT_MAY_SKIP_DISPLAY_INIT. This will only be auto-selected if
it is a CHROMEOS platform.
Change-Id: I3872d9aa993326ded135d8a5d950d5b1b1eddf34
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34308
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 46445155ea.
Reason for revert: Breaks coreboot. Either no UART working or the
complete boot process stops.
Platform: Intel Apollolake, tested on Up Squared
Change-Id: If581f42e423caa76deb4ecf67296a7c2f1f7705d
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Print an error message and return if an invalid QUP or BLSP is
encountered. This prevents a possible null pointer dereference
of spi_clk.
Change-Id: I374e15ce899c651df9c2d3e0f1ec646e33d4bdb2
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1401086
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Consider the following assignment:
u64 = s32
For positive values this is fine, but if the s32 is negative, it will be
sign-extended in the conversion to a very large unsigned integer. This
manifests itself in two ways in the following code:
First, gpu_pipe{a,b}_port_select are defined as int, and can have the
values 1 or 2. In the case when they have the value 2, the shift 2 << 30
will be a negative number, making it susceptible to the sign-extension
problem above. Change these variables to something more reasonable like
a uint8_t, which is unsigned.
Second, in any bit shift, any variable with width less than an int will
be implicitly promoted to an int before performing the bit shift.
For example, the variable gpu_pipea_power_on_delay is a uint16_t, and if its
highest bit is set, the shift gpu_pipea_power_on_delay << 16 will become
negative, again introducing the above problem. To prevent this, cast all
smaller variables to a u32 before the shift, which will prevent the
implicit promotions and sign extensions.
Change-Id: Ic5db6001504cefb501dee199590a0e961a15771b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229699, 1229700, 1229701, 1229702
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34487
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=b:112267918
TEST=Ran make help and verified build directory is no longer created
Change-Id: I4bb066b5c3b3d9a7bb19291ef928042b90f10440
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The build directory might not exist in the src dir.
BUG=b:112267918
TEST=make what-jenkins-does
Change-Id: I2d4fa6cc455592f92070796cd065cd66646d5ba9
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Qii Wang