Add new Pantheon sku-id for loading vbt-pantheon.bin
BUG=b:78663963
BRANCH=firmware-nami-10775.B
TEST=Boots to OS and display comes up.
Check the board specific vbt binary loaded.
Change-Id: I1ee156372754ac0e77caae5959a9ca9884de95f4
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27432
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In case multiple FMAP regions are specified, print the FMAP name.
Useful if VBOOT is enabled and multiple CBFS are printed.
Change-Id: Id6f29ebeda8a9bde6dfe39362e0f2a5e33c86b26
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26862
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To comply with all relevant bodies throughout the world, SAR settings
take into account the lowest common denominator Tx power settings. This
setup may lead to non-optimal performance when the user location is in a
country that may allow higher power setting. The purpose of Wireless Geo
Delta Settings (WGDS) is to provide offset settings for FCC, Europe,
Japan and Rest of the world. These offsets would be added (by Intel wifi
driver) to the base SAR Tx Power as defined in WRDS and EWRD
BUG=b:65155728
BRANCH=none
TEST=WGDS ACPI table gets created as expected.
Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The FCAM_PWR_EN gpio should be GPP_B4 according to the latest board
schematics.
Change-Id: Id926bd224b3392d8a61b6d8ae0509053afaa5b9e
Signed-off-by: Ricky Liang <jcliang@chromium.org>
Reviewed-on: https://review.coreboot.org/27433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tomasz Figa <tfiga@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Cast to u64 to prevent possible integer overflow.
Change-Id: I5c7d25278db54523242314cba6c85ac2f7a6c1f3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Fix a typo.
Only memcpy into target buffer if pointer is not NULL.
Change-Id: I1aa4b2ce1843e53ab6ed2224eaa928fc79ea3b83
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Replicate directory layout from x86 for SMP.
Change-Id: I27aee55f24d96ba9e7d8f2e6653f6c9c5e85c66a
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27355
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently thermal event support can not be disabled at board level.
Define and dependent code are placed in same file.
Move define of HAVE_THERM_EVENT_HANDLER to mainboard file.
Change-Id: Icb532e5bc7fd171ee2921f9a4b9b2150ba9f05c5
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/27415
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enabling of TBMC device on AP side requires corresponding support on the
EC side as well. Since not all octopus variants have tablet mode support
enabled, this change enables TBMC device only for phaser.
BUG=b:111264961
Change-Id: I1ce181baa8ebaff0a9d767e97ddc256eef9789e8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jett Rink <jettrink@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Remove "IshEnable" from soc_intel_skylake_config since it's not
used anymore.
Enable/disable ISH by checking if ISH device is turned on or not.
Refer to https://review.coreboot.org/#/c/coreboot/+/26485/.
BUG=b:79244403
BRANCH=none
TEST=Built.
Change-Id: I4d2889af118659852431c87cb516fd19b577efc5
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/26521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
To enable ISH device on atlas board, change "device pci 13.0 off end" to
"device pci 13.0 on end" in file
mainboard/google/poppy/variants/atlas/devicetree.cb. "IshEnable" is
not needed.
Config atlas board specific ISH setting in devicetree.cb.
Dynamically load gpio setting for ISH enabled/disabled cases.
BUG=b:79244403
BRANCH=none
TEST=Verified on Atlas board with ISH rework. ISH log showed on console.
Change-Id: I8269a85cd2ab7917bfc0e7d63d988e0e678d0bf2
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/26486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add PLL and clock init code.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui. Checked with frequency meter in SOC.
Change-Id: I1f561f66bcf12de6a95c2f64eecd9508bd9bb26c
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-on: https://review.coreboot.org/27031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Refactor PLL code which will be reused among similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: I11f044fbef93d4f5f4388368c510958d2b0ae66c
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27305
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to get better performance, map dram as cached after dram ready
in romstage.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui. Need a futher check after dram
calibration code ready.
Change-Id: Ie541fe08ee1d5b260abbabc0a5c18fb04e602b9c
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27304
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable MMU in bootblock for performance, link common code to provide
mtk_mmu_after_dram() to update MMU table in romstage after dram ready,
implement mtk_soc_disable_l2c_sram(), and call
mtk_mmu_disable_l2c_sram() to turn off L2C sram in ramstage.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui.
Change-Id: I4e35f8276ca23de7fd13da3515b9f48d944ead32
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Refactor MMU operation code which will be reused among similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: Id8173da0a02e57e863263fcd89c91a9c089e8a0f
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add an extra space after 8th value on each line to make it easier
to count the values.
Update the empty spd to remove two random 0x80 values.
BUG=None
TEST=None
Change-Id: If330dbf0c133f65aedddc58ecb351a80b0e45a05
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/27423
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support to check ISA extension for RISC-V.
Change-Id: I5982fb32ed1dd435059edc6aa0373bffa899e160
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philipp Hug <philipp@hug.cx>
According to BKDG for AMD Family 16h Models 30h-3Fh Processors
SDR50 tuning should be disabled in 0xA8 register.
Also fix clock frequency setting in 0xA4 for stepping >= A1
which caused reduced performance of SD cards transfer speed
even by half.
Change-Id: I80ca754b0c89e08aa90ff885467c7486a3efb999
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As *None* is special and not a payload, it makes sense to put it at the
top. Also, it was at before the latest addition of the FIT payload
choice.
Fixes: a892cde6 (lib: Add FIT payload support)
Change-Id: I52163ea9472308ecbc396012d9912b9617e0c318
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/27414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Set cntfrq_el0 to provide correct timer frequency.
Change-Id: I4b6d0b0cf646a066fc5a51552a1891eccbd91e5e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25450
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Print some useful information about the board.
Change-Id: I0acac7a29290bc2eb9f4283317165fa0cf1b24e1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25449
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Configure and enable MMU.
* Cover the whole I/O space.
* A minimum of 512KB TTB space is required.
* Use secure mem attribute as firmware is running in ARM TZ region.
Tested on Cavium SoC.
Change-Id: I969446da62b4cc7adf9393fab69ff84ebf49220d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This adds Cavium CN81xx SoC and SFF EVB files.
Code is based off of Cavium's Octeon-TX SDK:
https://github.com/Cavium-Open-Source-Distributions/OCTEON-TX-SDK
BDK coreboot differences:
bootblock:
- Get rid of BDK header
- Add Kconfig for link address
- Move CAR setup code into assembly
- Move unaligned memory access enable into assembly
- Implement custom bootblock entry function
- Add CLIB and CSIB blobs
romstage:
- Use minimal DRAM init only
devicetree:
- Convert FTD to static C file containing key value pairs
Tested on CN81xx:
- Boots to payload
- Tested with GNU/Linux 4.16.3
- All hardware is usable (after applying additional commits)
Implemented in future commits:
- Vboot integration
- MMU suuport
- L2 Cache handling
- ATF from external repo
- Devicetree patching
- Extended DRAM testing
- UART init
Not working:
- Booting a payload
- Booting upstream ATF
TODO:
- Configuration straps
Change-Id: I47b4412d29203b45aee49bfa026c1d86ef7ce688
Signed-off-by: David Hendricks <dhendricks@fb.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/23037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Convert Cavium's BDK devicetree blob to a static C file.
The resulting file must be included in mainboard folder to provide
board specific configuration values to BDK functions.
Example call:
python devicetree_convert.py --in sff8104.dtb --out bdk_devicetree.c
Change-Id: I76a5588aefe4f680228eca46a0e4dba7e695931c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26228
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Config ISH in SOC side by checking if ISH device is turned on.
"IshEnable" is not needed anymore since ISH device on/off will tell
if ISH should be enabled or not. "IshEnable" will be removed from chip.h
in separate CL.
Atlas board specific ISH setting is needed, which is committed in
separate CL.
BUG=b:79244403
BRANCH=none
TEST=Verified on Atlas board with ISH rework. ISH log showed on console.
Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/26485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
* Add SSDT generator to add dynamic ACPI code.
* Implement GBDC and SBDC for thinkpad_acpi kernel module.
Required for BDC power control from userspace.
Tested on Lenovo T430:
The bluetooth module is detected and can be powercycled using network manager.
Change-Id: Ida825196650966194a883945896a038b0790fe45
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Update stable directories
- Remove duplicated directories
There are currently 220 files that still need to have headers added or
be excluded from the lint-000-license-headers test.
Change-Id: I40046a2fb7359262b130f6813eda1f2c30916b46
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
These two files were added before I was able to get the updated linter
committed. Updated/Add the headers so the stable header lint check
can be updated.
Change-Id: I464ddecb5eebe8c5b907f3dcfeab1b06501af6ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/27362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In Windows Cygwin enviroment, compiler reports
redefinition error at cbfstool/ifwitool.c
on _packed and __aligned.
Skip new defines when vales are already defined.
Change-Id: I3af3c6b8fc57eee345afcef2f871b897138f78ce
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/27357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
GCC pre-defined some macros for detecting ISA extensions.
We should use these macros to detect ISA features.
Change-Id: I5782cdd1bf64b0161c58d789f46389dccfe44475
Signed-off-by: XiangWang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Ivy Jian