Some boards are adding a second pin used for synchronization between
the EC and AP. This is a direct connection between the EC and the SOC
that is intended to provide a lower latency interrupt signal for
sensors on the EC.
Currently the runtime EC interrupts assert an SCI before eventually
resulting in a Notify() on the MKBP device that the sensor driver users.
These extra layers add processing time and require additional EC
communication to determine the event source.
This interface was tested on a reworked Nocturne board with modified
EC and a modified kernel driver to ensure that the interrupt asserts
as expected and can be used by the kernel driver.
Change-Id: I49a11363ce82882e572bcb8923fd114ab6593fea
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/28758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to enable the OS SPI driver to use the software interface of
this controller the OPCODE menu has to be set up properly before
locking the controller. This is done on baseboard level so that all
variants will get this done as well.
Change-Id: I0bf0619ff0610c00325f03d13b6794aee8a62504
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/28834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Enable the IOMMU device on all kahlee based mainboards.
BUG=b:116196614
TEST=Check dmesg for AMD-Vi messages.
Change-Id: I18b9ba1a970c6973226e736d72f82fd53010f31c
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/28754
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the IOMMU in AGESA and copy the AGESA generated IVRS ACPI table.
BUG=b:116196614
TEST=Check dmesg for AMD-Vi messages.
Change-Id: I688d867c7bd4949a57b27c1b6a793c6a6e4a717a
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/28753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This heading should not be a top-level heading, because it's not at the
top of the file.
Also remove the trailing colon, because it's unnecessary in a heading.
Change-Id: I0685bb8734ad899c29618d24c0497e4fb8c0d01c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This patch ensures I2C controllers are out of reset without any
assumptions.
BUG=b:116191230
BRANCH=none
TEST=Dump MMIO offset 0x204 to check if I2C host controller is NOT
at reset (by reading Bit 0-1 as 3)
Change-Id: I4b335a834333e01cfa2d802e4aad0735d0212dcc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/28762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Need to tune I2C bus 6 clock frequency under the 400K Hz
Bug=b:115600671
TEST=flash coreboot to the DUT and measure I2C bus 6 clock
frequency whether arrive to 398.07K Hz
Change-Id: I5cc1f67f0db0553cb8424f81408ed4686cddb2fb
Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/28760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The FCH ASL is now capable of controlling the D-states of most AOAC
devices, as well as properly reinitializing the xHCI firmware on a
resume. Call the FPTS and FWAK methods.
BUG=b:77602074
TEST=On Grunt, go to S3 and wake with a USB keyboard
Change-Id: I4df8523569dc3dfbd87f79e780c18d39f0d9a37f
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28773
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add methods, and call them, for transitioning EHCI and xHCI to D0 or
D3cold. Add device objects necessary for waking the system via USB.
In order for USB to wake the system, it must be in the D3cold state.
Then on resume, its firmware must be reloaded.
This code relies heavily on AMD's FchCarrizo.asl (delivered in NDA PI
package), and has been modified to fit the coreboot ASL names. In
addition, AMD's methodology is to generate a SW SMI for saving/restoring
certain settings. This has been ported into U3D0 and U3D3, as the
necessary registers are now publicly documented.
BUG=b:77602074
Change-Id: I83d0dce13411601691318cc67c99adf291ccf3bb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28772
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a method to assist with setting the PwrGood Control register, which
will be useful for various devices.
BUG=b:77602074
Change-Id: Ief602c4bc42d27b3e236d24db815b990f3a2419c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Add methods that can be used for preparing all controller hub devices
for sleep, and that will turn the devices back on.
BUG=b:77602074
Change-Id: I4b0c48e96aff23b4c31c9e89582b9fa80dba7bda
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28770
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Duplicate ASL from AMD's FchCarrizo.asl (available in NDA PI package)
that can put AOAC devices into D0 or D3cold. The argument numbers
coincide with the AOAC register offsets for the various devices.
SATA, USB, and SD require additional device configuration. Add a
placeholder and mark as todo.
BUG=b:77602074
Change-Id: I32426f744a5ebbad9e8d3f2f37c4d214ad6dd3d4
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28769
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define various AMD_SB_ACPI_MMIO_ADDR registers at 0xfed80000. Define
various PCI config space registers. These are duplicated from AMD's
FchCarrizo.asl file.
BUG=b:77602074
Change-Id: Ie7447fef682424b05fa912b60c7b80112c6202de
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28768
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Indicate the devices that are enabled. This is somewhat rudimentary, but
could be improved in a later patch (e.g. get settings from devicetree).
Calculate values that may be used for reinitializing the xHCI firmware.
Add the EHCI BAR's current base address to gnvs.
BUG=b:77602074
Change-Id: I8af69c030eb2353ad75beeb2bfd3bef24abff04c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28767
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A later patch will rely on two USB settings from the BIOS. Add these
to the global_gnvs_t structure.
The first is a data that will be used to locate the xHCI firmware for
reloading after a resume. Although the existing calculations will be
somewhat simple, keeping this on the coreboot side will help in the
event multiple FWs are eventually in the build.
The second item is a usable EHCI base address that may be programmed
during S3 suspend and resume. At the time the PTS and WAK code runs,
the BAR will be clear.
BUG=b:77602074
Change-Id: I32205ac8a6908cca4a38dd68a7c7b591e76c06bb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
A later patch will leverage AMD's ASL support for handling AOAC
devices. This will gather coreboot's device enables from a bitwise field,
where each bit corresponds to the register offset used to control
each devices.
Create an identical structure, and add it to the nvs ASL and global_nvs_t
structure.
BUG=b:77602074
Change-Id: I40f0161cc0bbc574ad703e34278372f2504de100
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Regarding the SDMs, IA32_MC0_STATUS register is at 0x401, and
IA32_MC0_CTL is at 0x400.
So replace MSR at (0x400+1) by IA32_MC0_STATUS and the one at
0x400 by IA32_MC0_CTL.
Change-Id: I3f53c80f39078bd0c47c25013657e1169fc6c4a6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
In order to minimize Electromagnetic Interference (EMI) on the LVDS
interface driven by PTN3460, clock spreading must be activated for
mc_apl1 mainboard. The modulation ratio is set to 1 % of the nominal
frequency.
Change-Id: Ie457fcdbb6239dc0b25e2c35ad7a310ee80383f9
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/28761
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add basic flashing tutorial
** Describe internal and external flashing
** Describe flash supply diode protection
** Gives general advices on flashing
** Describe how to use flashrom --ifd
* Describe basic flashing on Lenovo T4xx devices
** Describe how to disassemble and access the flash IC on T4xx
** Describe flash layout on Sandy Bridge and Ivy Bridge series.
Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Explain recommonmark's auto_toc_tree and give an example to make writing
documentation easier. Show an example what happens if the document
isn't included in any toctree.
Change-Id: I4938d8d292ea890caec6d396b4fa04da65e398f4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/28427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
According to recommonmark's documentation the enable_auto_doc_ref is deprecated.
This is not true, as it's broken with Sphinx 1.6+ commit
12d639873953847de31ec99742b42e50e89ed58c.
recommonmark bug report is here: https://github.com/rtfd/recommonmark/issues/73
Instead of using this feature, which doesn't support top level directories in
the relative document path anyway, use the TOC tree or inline RST code.
Disable auto_doc_ref and document how to reference documents.
Change-Id: I9319985b504c4215c33ebbeb9c38317b9efcb283
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/28550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The globalnvs.asl file had become mixed with tabs and spaces to align
columns. Use all tabs to align the comments.
BUG=b:BUG=b:77602074
Change-Id: Ife4cf86372a8e24e78b38cca0254dd9fa00dd6b0
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/28764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
Vendor VBT on ThinkPad R500 intends to set a 220MHz backlight PWM frequency
which seems to work well.
Change-Id: Ic1a12c7e3173468561ed5615319962d0abc6d61b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/28643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Linking this file instead of including a header makes it possible to easily
change gpio settings for a variant.
Change-Id: Ifd496510d4868f5901a9dbbf7f1523ccffaf15ab
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/28628
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some settings like direction are only used if the mode is GPIO.
Change-Id: I4efc54dfef3721b528b90d49f490014d9132cdf8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/28627
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the last dependency was resolved, remove AmdLib folder.
BUG=b:112525011
TEST=Build and boot grunt.
Change-Id: Ibd9a20bc358742520138b9b01f76d7fd2fac92ab
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28742
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This board is pretty much like the G41M-GS, but with DDR3 memory
instead. The PCB layout is almost identical.
What works:
- S3/S4 resume
- RAM init
- Booting to Debian
- Display lights up w/ libgfxinit
- Both PS/2 work
- Ethernet
- Graphics card on PEG
- USB
- SATA ports
- NVRAM debug_level
- Internal flashing
- PCI slots (tested with CT4810 audio card)
- fancontrol (Only CPU fan can be regulated)
- Audio (Rear ports only)
What does not work:
- Hell knows what might be wrong
What is not tested:
- PCIe x1
- IDE
- Floppy
- Parallel port
Change-Id: I66b216af740680c390ea82e4fe07737c20227cc6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The function to fill out the FADT table exits early if the devicetree
config option to disable the legacy timer is set. This means it never
gets to the later check for s0ix config option and so the flag to
indicate that it supports low-power idle in S0 is not set.
Change-Id: Ia0416f21b6445f6feecb6f0301d48fdf2522b8a6
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/28755
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable Gigabit Ethernet network controller on whiskey lake rvp platform,
add NVM bin file as well.
BUG=N/A
TEST=Build and boot up into chromeos on whiskey lake rvp platform, and
check eth0 can get IP address assigned,
Change-Id: Ia299a2aa78108175074e084cc34a7d2b38cf1c72
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/27848
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SkipMpInit UPD had ben moved from Fsp SiliconInit UPD to Fsp MemoryInit
UPD, hence change the settings in coreboot side as well. The old options
in SiliconInit get deprecated, so leave the code as is will be
harmless. Make the changes limited to coffeelake itself.
Change-Id: If968de78117068668e4f0006c412442c50658ba9
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/28740
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sphinx displays a tab as four spaces, which makes code indented with
eight spaces per level stand out. Format the example configuration file
in fit.md consistently with tabs to make it look consistent everywhere.
Change-Id: Ia1d4c44e68e5267bac1f0f558421c6a0c7a9329c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Some of the FSP silicon UPD entry can be updated base on device switch
in pci device tree, have both static config setting and device tree "on"
and "off" will be redundant.
BUG=N/A
TEST=Build and boot up fine with Whiskey Lake RVP platform.
Change-Id: Ia36cfab03c4613786e5580a039d89007b630adf9
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/27766
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change is required to apply patch
06_CorebootPayloadPkg_keep_cb_table since conflict in white space
between patch and target file in edk2 makes patch rejected while
building under coreboot-sdk:1.52.
Change-Id: I38f7d46925cc00a2b5c5400e3fbf3579990f3fa5
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Martin Roth <martinroth@google.com>
As per internal discussion, there's no "ChromiumOS Authors" that's
meaningful outside the Chromium OS project, so change everything to the
contemporary "Google LLC."
While at it, also ensure consistency in the LLC variants (exactly one
trailing period).
"Google Inc" does not need to be touched, so leave them alone.
Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/28756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Duncan Laurie