The new AMD PSP and SMU BLOBs currently have fixed sizes in the
southbridge Makefile. Future PSP and SMU updates may require more
space and thereby cause the make to fail with cryptic error messages.
Change the makefile to compute CBFS locations and the corresponding
PSP pointer table entry values based on the actual file sizes.
Additionally, the FWM directory has expanded to 4096 bytes. The
Avalon makefile is modified to zero-pad the FWM directory using
the "dd" system command.
There is dead code in the makefile to allow hardware validated boot
ROMs, but the option is hard-coded to be disabled. Remove the HVB
dead code.
Change-Id: I4705cede8ed001a71bb4f49598444255c9609d52
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/7726
Reviewed-by: Marshall Dawson <marshall.dawson@se-eng.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Along with the spelling fixes, it was requested that I correct this
comment. Updating "LocateImage() take minutes" to
"LocateImage() takes minutes" everywhere that comment occurs.
Change-Id: I28cd47476cb42ba3e404e064695a7fd97d581834
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7848
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Port 80h codes were coming out of bootblock and romstage scrambled, or
were not coming out at all. Initializing the LPC signal pads as LPC
fixes that issue.
Change-Id: I16943513f2eb6fe8fa58766aaa82dac182440c34
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7802
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The GPIO_NC1 #define was added to handle GPIOs that are not on func0.
This is already handled elsewhere in the GPIO code, so is not needed.
- Remove the single GPIO_NC1 from platforms using fsp_baytrail
- Revert the GPIO_INPUT_PU_10k #define to remove the _func argument.
Update everywhere this macro is called.
- Remove GPIO_NC1
Change-Id: I32f337af7bc88eab821d9a8c375145b45718275f
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7849
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The GPIO_OUT_LOW #define was missing an internal comma in both
soc/intel/baytrail and soc/intel/fsp_baytrail.
Thanks to Werner Zeh for pointing this out.
Change-Id: I2e5507058739e5fdc2c0e43e0380058458870e46
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7801
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
The variable 'halt' is not useful and results in a compile error
because of:
1b2f2a07 Introduce halt()
build error:
src/mainboard/amd/olivehillplus/romstage.c: In function 'cache_as_ram_main':
src/mainboard/amd/olivehillplus/romstage.c:43:15: error: declaration of 'halt' shadows a global declaration [-Werror=shadow]
In file included from src/include/cpu/x86/lapic.h:6:0,
from src/mainboard/amd/olivehillplus/romstage.c:29:
src/include/halt.h:31:32: error: shadowed declaration is here [-Werror=shadow]
cc1: all warnings being treated as errors
make: *** [build/mainboard/amd/olivehillplus/romstage.pre.inc] Error 1
Change-Id: Id67a0dcb192fb6478115e489f46bfb07021afd90
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/7847
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
This one is special because qemu is really far from anything real but
shares some common features.
Change-Id: Ia1631611724a074780e1fece50166730b2ee94ae
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6939
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Scott Duplichan provided a win32 related fix that
we want to use.
Change-Id: I791b470f9f6c5bf140fc190d290741f35f05d254
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7827
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
.. and also drop the northbridge and southbridge used by the board.
This is one of the last boards to not use ROMCC for romstage. Let's
get rid of it.
Change-Id: I0a864b2c4ce3eeb7d3e199944eedef0cd71a85e6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7853
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
There is no Cache As Ram for these boards, let's get rid of them.
Also drop unused dependencies
Change-Id: I94782da521c32ade7891ada29d3013cbab32a48b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7836
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The first dword in FirmwareTN has been changed from 0xa0009 to 0xa000e.
The FirmwareTNHeader is not called by any one in latest PI. It seems to
be useless for now.
Change-Id: Ic7a20e0bcca8de0b56c7bc5d01e0ce86347bde21
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/7844
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
This allows the chromeos header and functions to be included
without needing to guard with #if CONFIG_CHROMEOS.
BUG=chrome-os-partner:28234
BRANCH=None
TEST=emerge-rambi coreboot
Original-Change-Id: I523813dc9521d533242ae2d2bc822eb8b0ffa5e2
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196265
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit b78ccada9a01f54a60993dfc2c618201d31df9ad)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic2f7127966da716e114336c30829a6403d82e180
Reviewed-on: http://review.coreboot.org/7843
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This cleans up a mis-merge in elog.c and puts the following
change back:
drivers/elog: Unmangle header include out of pre-proc cond
commit a3119e5835
Change-Id: Iafbbd381efdb103717022d2a3c342da376a9428f
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to protect ourselves from the kernel driver not honoring or
placing the correct frequency in the backlight register always set one.
This code path picks 200Hz as the default if nothing is specified in
device tree. It's somewhat arbitrary but that frequency is valid for all
the eDP panel specs we've seen being used on baytrail devices.
BUG=chrome-os-partner:28267
BRANCH=baytrail
TEST=Built and booted in normal mode. Noted register write stuck.
Original-Change-Id: Ifec29f0671e9f14ba57b9643c29d8bb2cd07eef5
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196821
Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 2eaa650860ebbc838dbf8c1c1ca2259ac64141ac)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ifec29f0671e9f14ba57b9643c29d8bb2cd07eef5
Reviewed-on: http://review.coreboot.org/7845
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the normal mode case these settings aren't overwritten by
the VBIOS because the VBIOS does not run. Therefore, the settings
need to align with what the VBIOS programs so that there is a
consistent panel power sequencing.
BUG=chrome-os-partner:28267
BRANCH=baytrail
TEST=Built and booted. Noted settings set by firmware for both dev
and normal mode match.
Original-Change-Id: Iccf65e2a6bce6859fd7cb0f466d4b44d654523ce
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196822
Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 12999018f2b08df0c3b9cdac1f16e9c4517ea803)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Idf1a701ffcb1c990cec2ca1ccca24cc0d26fabbf
Reviewed-on: http://review.coreboot.org/7846
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This ensures that SPI is ready when eventlog code is used.
x86 platforms which use eventlog invoke elog_clear() in GSMI and
elog_add_event_raw() when deciding the boot path based on ME status.
For the SMM case spi_init() is called during the finalize stage in
SMM setup. For the boot path case we can call spi_init() at the
beginning of BS_DEV_INIT and it will be ready to use when the boot
path is determined from the ME status.
BUG=none
BRANCH=none
TEST=tested on Link (bd82x6x), Beltino (Lynxpoint), and Rambi
(Baytrail) with follow-up patch
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id3aef0fc7d4df5aaa3c1c2c2383b339430e7a6a1
Original-Reviewed-on: https://chromium-review.googlesource.com/194525
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 173d8f08e867bab8c97a6c733580917f5892a45d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ifaed677bbb141377b36bd9910b2b1c3402654aad
Reviewed-on: http://review.coreboot.org/7756
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Set VB_INIT_FLAG_SW_WP_ENABLED according to the status returned by an
optional platform / mainboard function vboot_get_sw_write_protect().
BUG=chrome-os-partner:26777
TEST=Manual on Rambi with all patches in sequence:
`crossystem sw_wpsw_boot` prints 0
`flashrom --wp-enable` and reboot
`crossystem sw_wpsw_boot` prints 1
BRANCH=Rambi
Original-Change-Id: Ifb852d75cc106d10120cfee0a396b0662282051a
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/190096
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c4668fc8a9ab31d9cf876b3d9ad3405756d4d683)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Idace325439958f6b490d2e6705d55e95305c4b2a
Reviewed-on: http://review.coreboot.org/7750
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The call was after the call to vboot_verify_firmware and so would only be
called when falling back to RO, aka recovery mode. This change moves it to
before vboot_verify_firmware so we'll always have the cbmem console.
BUG=None
TEST=Built and booted on nyan and verified that the cbmem console was the same
as the serial output. Built for big and blaze.
BRANCH=nyan
Original-Change-Id: I02d01110659689b08d32777dae384ac3e01b3b9f
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/196158
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d3e4a778e4a0f5ade7d633d8ce7e72ef06c44086)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id14a19a78bcb21cb0c4030c2e41195e491f690d5
Reviewed-on: http://review.coreboot.org/7777
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Panel datasheet defines some delay between PWM signal out and
backlight enable. This change fixes the current sequence
and makes the delays adjustable by dt setting.
BRANCH=none
BUG=chrome-os-partner:28008
TEST=Verified on Big DVT and Nyan/Norrin panels.
Panel works fine with dev mode, and the measurement
of power on sequence meets panel requirements.
Original-Change-Id: If6015bbb6015a3b203d425f5e90f676ad786b5e8
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/196183
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 2bbcaa7281222ffc0b4026e8b1eb4c210a8e308a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id6424f66eb8dc6adeb70eaa33df742f4e57983c3
Reviewed-on: http://review.coreboot.org/7776
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Enable pinmux clamp function to avoid pinmux conflict.
For pins which are configured to tristate enabled, the inputs to the
controller will be clamped to zero. This can be used to avoid pinmux
conflicts since the tristate bit is set to 1 in the power-on-reset
pinmux setting.
With pinmux clamp enabled, we need to configure all the input pins
to tristate disabled.
BUG=chrome-os-partner:27091
BRANCH=None
TEST=built and booted successfully, display worked fine.
Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194060
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0
Reviewed-on: http://review.coreboot.org/7775
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This enables event logging support for Nyan platforms.
Right now this doesn't do a whole lot. We can add events in
later CLs.
BUG=none
BRANCH=none
TEST=built and booted for Nyan Rev. 1, eventlog gets initialized
if necessary and can be printed by "mosys eventlog list"
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id77a78f55c8bff9ef0ffc7109c8b03c270e8b6b1
Original-Reviewed-on: https://chromium-review.googlesource.com/191200
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 1bb1a00863a63e53379b02f2b466d4d8ae3cef50)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3a5d896d97dfc66ec37114bd3bac3f34e1c22bf7
Reviewed-on: http://review.coreboot.org/7774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 474313d1b6.
This reverted commit was applied out of sequence and there are a number
of dependencies that need to be in place prior to adding it. Remove it
for now.
Change-Id: If80c40867098dee2feff2b9a1d824558f4d7028d
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The length modifiers for unsigned char were accidentally changed from
'hh' to 'h' with commit:
* 1c8ee21 edid: Change static variables to auto variables.
Change-Id: I4b3e63cbcde7635b842894f776373f7946bd0df8
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4477
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
SSUS GPIO 5 reflects the Minnowboard Max SKU:
--- GPIO 5 low is a 1GB board
--- GPIO 5 high is a 2GB (or 4GB in the future) board.
This allows us to determine the board type at runtime and configure
the FSP appropriately.
Change-Id: I9f75df5413d23d63280b601457ea9a1ff020d717
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7797
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
- Build gpio.c into romstage
- Add functions to translate the GPIO # to a pad #, then return the
value read from the GPIO.
- Add functions to configure the GPIO - Function, Pull up/down, pull
strength, Input/Output, and Output level.
Change-Id: Ic37dfc9a74a598023bdf797d31087428adec176a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7796
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I5a5af71ea49152accd92dc331a19e57f3717e4ff
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7841
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I5d2d4ba098d2a95f7643f000f4b48b3349a8e6cf
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7839
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: Ice5d8ce9408356c866a9a2ee5a03f704f55ddc2a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7842
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I31333742d9c90cf6d7ae3d2f324880ed53807d7f
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7840
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
If a payload decides not to use a USB device then the device can be
detached. This prevents the device from interfering with normal
operation on some platforms. Also, it aligns the behavior of
usb_generic_init with class-specific init functions such as
usb_msc_init, which will detach unsupported devices.
BUG=None
TEST=Manual on Squawks. Test recovery boot w/ USB 2.0 media, verify
that media boots and no babble error is encountered.
BRANCH=rambi
Change-Id: I8fb30951d273e4144cda214a30a2e86df90f2c1c
Original-Change-Id: Iee522344558749603defb2966e18765aa195dae2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195401
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit f7778ace68c9bee8dfab2b263e5dd054fc50c3bb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7830
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change introduces LPAE for virtual address translation. To enable it, set
ARM_LPAE. Boot slows down about 4ms on Tegra124 with LPAE enabled.
TEST=Booted nyan with and without LPAE. Built nyan_big and daisy.
BUG=None
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: I74aa729b6fe6d243f57123dc792302359c661cad
Original-Reviewed-on: https://chromium-review.googlesource.com/187862
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 6d8c8b2bbdc70555076081eb3bfaabde7b4a398f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8980375c14758af35f7d5ec5244be963e5462d8a
Reviewed-on: http://review.coreboot.org/7749
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This consolidates all calls to spi_claim_bus() and spi_release_bus()
to a single location where spi_xfer() is called. This avoids confusing
(and potentially redundant) calls that were being done throughout the
generic spi_flash.c functions and chip-specific functions.
I don't think the current approach could even work since many chip
drivers assert /CS once and then issue multiple commands such as page
program followed by reading the status register. I suspect the reason
we didn't notice it on x86 is because the ICH/PCH handled each
individual command correctly (spi_claim_bus() and spi_release_bus()
are noops) in spite of the broken code.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3257e2f6a2820834f4c9018069f90fcf2bab05f6
Original-Reviewed-on: https://chromium-review.googlesource.com/194510
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d3394d34fb49e9e252f67371674d5b3aa220bc9e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieb62309b18090d8f974f91a6e448af3d65dd3d1d
Reviewed-on: http://review.coreboot.org/7829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a wrapper function and a Kconfig variable to differentiate
between SPI controllers which use atomic cycle sequencing versus
those where the transaction sequence is controlled manually. Currently
this boils down to x86 vs. non-x86.
Yes, it's hideous. The current API only worked because, for better or
worse, x86 platforms have been homogeneous in this regard since they
started using SPI as an alternative to FWH for boot flash. Now that
we have non-x86 platforms which use general purpose SPI controllers,
we should overhaul the entire SPI infrastructure to be more adaptable.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: If8ccc9400a9d04772a195941a42bc82d5ecc1958
Original-Reviewed-on: https://chromium-review.googlesource.com/195283
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4170c59d06206667755402712083452da9fcd941)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I54e2d3d9f9a0153a56f7a51b80f6ee6d997ad358
Reviewed-on: http://review.coreboot.org/7828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In last clean-up commit, the detailed_blocks parsing has been merged to one
for-loop and combining return values in each iteration instead of assignment.
As a result, has_valid_detailed_blocks should now be initialized as 1.
BRANCH=none
BUG=none
TEST=Tested AUO 1080p and InnoLux 720p panels on nyan_big
Original-Change-Id: Ie4b6e25de63c0e216ae5de9bde20eed1fe3e59a6
Original-Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/195803
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 21ac533d17c892c39532c263cc6ec15e4507ed3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I23111efb902c7e5994a4dbdfe77242c13ef5a70e
Reviewed-on: http://review.coreboot.org/7835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To support parsing multiple EDID blobs, the static "decode results" flags should
be changed to auto variables inside decode_edid.
This is done by packaging static variables into a structure inside decode_edid.
We also revised some functions (manufacturer_name, do_checksum) to avoid
accessing global variables directly. Extension (and detail block) parsing may
need to access and return all parsed context so we pass the whole structure to
it.
BRANCH=none
BUG=none
TEST=emerge-nyan coreboot chromeos-bootimage
# See EDID parsed correctly on Nyan.
Original-Change-Id: Ieca93d446bacf655c145dffdfa6cc6f5dc87ac26
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/195372
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ed45909df24c05a0cb8b2ff662fdd2d7a39012f0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I17cdfa770181a6eaac9d1050d340c8e052572b4a
Reviewed-on: http://review.coreboot.org/7834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use the RTC driver interface to find the timestamp for events instead of
reading the CMOS based RTC directly on x86 or punting on ARM. This makes
timestamps available on both architectures, assuming an RTC driver is
available.
BUG=None
TEST=Built and booted on nyan_big and link and verified that the timestamps
in the event log were accurate.
BRANCH=nyan
Original-Change-Id: Id45da53bc7ddfac8dd0978e7f2a3b8bc2c7ea753
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197798
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 493b05e06dd461532c9366fb09025efb3568a975)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8481adde86d836b5f0b019c815bada6d232a4186
Reviewed-on: http://review.coreboot.org/7833
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This attempts to isolate/fix some x86-isms:
- Translate flash offset to memory-mapped address only on x86.
- Guard ACPI-dependent line of code
- Use a Kconfig variable for SPI bus when probing the flash rather
than assuming the bus is always on bus 0.
- Zero-out timestamp on non-x86 until we have a better abstraction.
(note: this is based off of some of Gabe's earlier work)
BUG=none
BRANCH=none
TEST=needs testing
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I887576d8bcabe374d8684aa5588f738b36170ef7
Original-Reviewed-on: https://chromium-review.googlesource.com/191203
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 1fc7a75f8c072098e017104788418aeed0705e93)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ida4b211cf21ecdde9745d4dbef6a63ffb9fbba8d
Reviewed-on: http://review.coreboot.org/7832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This severs a dependency the eventlog code has on initializing
chipset/SoC SPI controller. Currently elog_init() calls spi_init()
as a catch-all. This worked for x86 since the SPI controller is only
used for one thing on existing platforms. As we add eventlogging
support to non-x86 platforms we need to consider the more generalized
case where the assumptions about how SPI works on x86 are no longer
valid.
BUG=none
BRANCH=none
Signed-off-by: David Hendricks <dhendrix@chromium.org>
TEST=built and booted on Link, Beltino and Rambi. See below for
"mosys eventlog list" output on Link showing boot and suspend/resume
events (including lid close/open) added successfully.
localhost ~ # mosys eventlog list
0 | 2014-04-14 13:52:44 | Log area cleared | 4096
1 | 2014-04-14 13:52:44 | System boot | 50
2 | 2014-04-14 13:52:44 | EC Event | Power Button
3 | 2014-04-14 13:52:44 | SUS Power Fail
4 | 2014-04-14 13:52:44 | System Reset
5 | 2014-04-14 13:52:44 | ACPI Wake | S5
6 | 2014-04-14 13:53:25 | ACPI Enter | S3
7 | 2014-04-14 13:53:35 | ACPI Wake | S3
8 | 2014-04-14 13:53:35 | Wake Source | RTC Alarm | 0
9 | 2014-04-14 13:53:49 | ACPI Enter | S3
10 | 2014-04-14 13:54:00 | EC Event | Lid Open
11 | 2014-04-14 13:54:00 | ACPI Wake | S3
12 | 2014-04-14 13:54:00 | Wake Source | GPIO | 15
Original-Change-Id: I26e25c0a856f7b8db5ab6b8e7e1acae291d2eadc
Original-Reviewed-on: https://chromium-review.googlesource.com/194526
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 2971d20b6ebdd9803b05ccbbaeefe1bde1a21af4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia5f2913fd8e4fee6e741e6d1e39d32bb86525cb3
Reviewed-on: http://review.coreboot.org/7831
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current algo sets dc shift clock divider to 5 and PLLD DIVP
to 0, this is causing VCO out of the characterized range for some
panels.
This CL changes the dc shift clock divider to 1 and calculates a
proper DIVP to have the VCO inside the characterized range, i.e.,
500MHz ~ 1000MHz.
BRANCH=none
BUG=none
TEST=Verify on below panels the pixel clock frequencies are correct.
1. AUO B133XTN01.3 (69.5 MHz)
pixelclk(MHz), pll_d(MHz), m/n/p
without: 69.5 695 12/695/0
with: 69.5 139 3/139/2
2. AUO B140HTT01.0 (141 MHz)
pixelclk(MHz), pll_d(MHz), m/n/p
without: VCO (1410000000) out of range. Cannot support.
with: 141 282 2/94/1
3. LG LP140WH8 (76.32 MHz)
pixelclk(MHz), pll_d(MHz), m/n/p
without: 76.32 763.2 5/381/0
with: 76.3125 152.625 8/407/2
4. N116BGE-EA2 (76.42 MHz)
pixelclk(MHz), pll_d(MHz), m/n/p
without: 76.40 764 3/191/0
with: 76.375 152.75 12/611/2
Original-Change-Id: Id4b3a4865acde37a97d7346ec88406f5237304eb
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/195534
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 1b56566786aa86c14f691fa3858b878f27b6b4de)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia9de93420e60323f143a42db842febdd3706fe44
Reviewed-on: http://review.coreboot.org/7773
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Similar to the W25Q64DW, the W25Q32DW has basically the same
attributes as the earlier W25Q32 parts but with a different
value in the MSB of the ID.
BUG=none
BRANCH=none
TEST=tested on nyan, now SPI flash commands actually work.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I697768a443c98515d893f9cf8f8b4258ae0f159d
Original-Reviewed-on: https://chromium-review.googlesource.com/191205
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 35f03f4f4f21c470d172ce7cce257517b959346d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I73606737835e4f8ea00d2c331ca37957e4abd953
Reviewed-on: http://review.coreboot.org/7755
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The old print simply said "Got idcode". This makes it actually
display what it got.
BUG=none
BRANCH=none
TEST=tested on nyan
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8f1c8fde6e4ac00b12e74f925b7bcff83d1f69f3
Original-Reviewed-on: https://chromium-review.googlesource.com/191204
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 5f13789be77d038d3c1602037afe29a0351f72ee)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I65d0d51c17b3bda62351532aac1756b630433ea3
Reviewed-on: http://review.coreboot.org/7754
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
hynix-2GB-204MHz/hynix-4GB-204MHz are not workable with Samsung RAMCODE.
To replace them by samsung-2GB-204/samsung-4GB-204 for bring up purpose.
BRANCH=none
BUG=chrome-os-partner:27682
TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and
boot to kernel successfully with all the RAMCODE
Original-Change-Id: I7c2a96e84e6988dd739a9621ff93edc01703306a
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/195396
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org>
(cherry picked from commit dc028c408be58f036fe125abc2e49e2c0cde0aa8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieeb0250e42fb48c6089bc8dc95550c9b1694d7f8
Reviewed-on: http://review.coreboot.org/7772
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The pixel clock for some panel (ex: CMN N116BGE-EA2: 76420000) cannot be matched
by our PLLD params finding algorithm, after VCO/CF limitations are applied.
To support these panels, we want to allow "best matched" params.
BRANCH=nyan
BUG=none
TEST=emerge-nyan_big coreboot chromeos-bootimage;
emerge-nyan coreboot chromeos-bootimage;
# Successfully brings up display on Nyan_Big EVT2 and Nyan Norrin.
Original-Change-Id: If8143c2062abd2f843c07698ea55cab47bf1e41a
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/195327
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 8aa66e659e3c60296f05e59b4343496a850ea019)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I623db44de35fecee5539e4d72f93f28b5fa0b59c
Reviewed-on: http://review.coreboot.org/7771
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Bruce Griffith