Recommendation from SOC to config IQ=8 for U3 port0,
vboost for all U3 ports for passing ESD pin test.
BUG=b:173476380
BRANCH=zork
TEST=1. emerge-zork coreboot
2. run U3 SI/ESD pin test => pass
Change-Id: I0e6414f686a995536a0fd8aa0f6f70e5a36718a3
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50992
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set up EC_IN_RW GPIO in coreboot.
BUG=b:180686277
TEST=Verified that EC_IN_RW signal is read correctly in depthcharge.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: Ic41012d3d4843dcab0f6dd9c28396cb9d5c49f08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
FSP expects mp_get_processor_info to give processor specfic apic ID,
core(zero-indexed), package(zero-indexed) and thread(zero-indexed) info.
This function is run from BSP for all logical processor, With current
implementation the location information returned is incorrect per logical
processor. Also the processor id returned does not correspond to the
processor index, rather is returned only for the BSP.
BUG=b:179113790
Change-Id: Ief8677e4830a765af61a0df9621ecaa372730fca
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50880
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support to get core, package and thread ID from lapic ID.
Implementation uses CPUID extended topology instruction to derive
bit offsets for core, package and thread info in apic ID.
BUG=b:179113790
Change-Id: If26d34d4250f5a88bdafacdd5d56b8882b69409e
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Let's not have CBMEM hooks in between the different
INITRAM timestamps.
Change-Id: I46db196bcdf60361429b8a81772fa66d252ef1a3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
If the UPD size in coreboot sizes mismatches the one from the FSP-M
binary, we're running into trouble. If the expected size is smaller than
the UPD size the FSP provides, call die(), since the target buffer isn't
large enough so only the beginning of the UPD defaults from the FSP will
get copied into the buffer. We ran into the issue in soc/amd/cezanne,
where the UPD struct in coreboot was smaller than the one in the FSP, so
the defaults didn't get completely copied.
TEST=Mandolin still boots.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7e9f6f20d0091bbb4abfd42abb40b485da2079d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Send end of post message to CSME in FSP, by selecting EndOfPost
message in PEI phase. In API mode which coreboot currently uses,
sending EndOfPost message in DXE phase is not applicable.
BUG=b:180755397
TEST=Extract and copy MEInfo tool from CSME Fit Kit to voxel, execute
./MEInfo | grep "BIOS Boot State"
and confirm response shows BIOS Boot State to be "Post Boot".
Change-Id: I1ad0d7cc06e79b2fe1e53d49c8e838f4d91af736
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51012
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
EC does not exist in Bilby platform, so removing EC size from board.fmd
and updating bilby fmap size to 0xfef000.
Removing unused EC FW config options MANDOLIN_HAVE_MCHP_FW and
MANDOLIN_MCHP_FW_FILE.
Change-Id: I9ca4e421b0d80d041ed4046fa20cc16e24a776d0
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Calling cbmem_recovery(0) late in ramstage would appear
to remove all CBMEM entries created so far.
Change-Id: I2abb079844c4b41be09354d603ad36e4a56ea2e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50841
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This build-tests ASan support for both romstage and ramstage, because
the Haswell northbridge selects the HAVE_ASAN_IN_ROMSTAGE option. x86
Kconfig selects the HAVE_ASAN_IN_RAMSTAGE option, and Haswell is x86.
Change-Id: I892881d2315c09aa6d9d80903a8399d0f4d648e4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
ChromeOS does not compile in CONFIG_OF, so PRP0001 will not successfully
register the device with its driver. Change to GOOG0005 to match other
ChromeOS devices with I2C-connected Cr50 TPM.
BUG=b:180657076
TEST=abuild
Change-Id: Ic1d4eb5e12ea7f7e693f1ffd3848e59668ac2deb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50920
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Picasso currently declares the BAR region between TOM and IO_APIC_ADDR.
This region includes MMCONF. We don't want to map any PCI BARs in this
region. This also matches what intel does.
See soc/intel/braswell/acpi/southcluster.asl for an example.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9474fd6ac75a7245b3c35151c38186e913219bb0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This differs slightly from picasso. The PCI BAR region is between TOM1
and CONFIG_MMCONF_BASE_ADDRESS. This matches what the Intel platforms
are doing. It also matches what linux derives from the e820 tables:
> [mem 0xd0000000-0xf7ffffff] available for PCI devices
Picasso currently declares the region between TOM and IO_APIC_ADDR.
This region includes MMCONF. We don't want to map any PCI BARs in this
region.
TEST=Boot majolica and check logs
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [bus 00-3f]
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4ff02012795e2166e3a4197071b1136727089318
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50893
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will also be used for cezanne. Stoney also has a similar function,
but it hard codes the scope path. I didn't have a device setup to test
if switching to this function was a no-op. So I left it.
TOM2 isn't used by any ASL, so we could remove it later.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7c8f476a7735fea61a3244b97988e3ead3b42e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The devices were copied from picasso with the following modifications:
* UART{2,3} were deleted
* I2C{0,1} were added
* eMMC was removed since it hasn't been validated
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iddfb975e9292785d0951dd7bb31c1997d2185abd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enable the building of guybrush variants and configure the first variant
also called guybrush.
BUG=b:180419462
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I3bed620378f9152277b4943ead1017f61a21ea82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50845
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move wait for TXT and early ME init out of `collect_system_info`, and
then drop the first call to it. Also drop a useless register read.
Tested on out-of-tree HP 630, still boots.
Change-Id: I9b167f44cbd96864bf1e8b616576af19cbbfd90c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49581
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per document 336067-007US (C620 PCH datasheet), add macros for all
bits in the SMI_STS register. These will be used in common code.
Change-Id: I1cf4b37e2660f55a7bb7a7de977975d85dbb1ffa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50915
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This file is never built. Plus, `CONFIG_STACK_BOTTOM` does not exist.
Change-Id: I111b20e3443dca701ee8666d44261a00a161d83f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The SoC can be selected in the corresponding option choices directly.
Change-Id: I226c500dd7370f4610b0117a9e70d727f1d66951
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Rowan was the only Oak variant that used TPM2. However, it was removed
in commit 0aa1f9e905 (google/oak: Delete rowan). Since the other three
variants use TPM1, remove now-unnecessary Kconfig options from Oak.
Change-Id: If19df00463f63f1101475f59b5ecea5a9724a9ab
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Replace it with `HAVE_ACPI_RESUME`, which defaults to n for this board.
Change-Id: Ibb07c0d001ded8d7ff991bf63607872bf4b79c8e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
CrashLog is a diagnostic feature for Intel TGL based platforms.
It is meant to capture the state of the platform before a crash.
The state of relevant registers is preserved across a warm reset.
BUG=None
TEST=CrashLog data generated, extracted, processed, decoded sucessfully on delbin.
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Change-Id: Ie3763cebcd1178709cc8597710bf062a30901809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove extra parameter in phy_dll_bypass_set, since it does not
depend on the channel at hand.
Signed-off-by: Moritz Fischer <moritzf@google.com>
Change-Id: Iae09a6053daf58bf12604e1903c754dc9f1e986f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Sometimes the USB device will be lost after DUT resume.
Adjust USB phy settings for all USB ports to fix the failed symptom.
BUG=b:174538960
BRANCH=zork
TEST=USB devices stay connected after running suspend test
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I25bca968bb4a740161b36e2082d1e500ae648712
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50020
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jakub Czapiga