Move the PCH PCI device defines out of the SOC specific PCI defines
and into a common include. The PCH is common and doesn't need
duplicate definitions.
Change-Id: I1ca931e0f01e03c67f8f65ed7fd33c2c1d22183d
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Set the PCU locks as indicated by the BWG.
Lock the following:
P_STATE_LIMITS
PACKAGE_RAPL_LIMIT
SAPMCTL
DRAM_PLANE_POWER_LIMIT
CONFIG_TDP_CONTROL
Change-Id: I5f44d83e2dd8411358a83b5641ddb4c370eb4e84
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51505
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the SMI_LOCK to post SMM setup. Also, use the correct access
method for SMI_LOCK. GEN_PMCON_A is in PCI config space and not
in MMIO space on this PCH.
Change-Id: Ibbb183ef61ca7330198c1243ecfc2d4df51e652b
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51452
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This macro is unused and its value is often wrong. Drop it.
Change-Id: Id3cfaa4d2eef49eddc02833efbe14e0c5c816263
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51662
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Prevent writes to Global SMI enable as recommended by the BWG.
Change-Id: I7824464e53a2ca1e860c1aa40d8a7d26e948c418
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add SOC_INTEL_COMMON_PCH_LOCKDOWN and PMC_GLOBAL_RESET_ENABLE_LOCK
to meet device security requirements.
LOCKDOWN has dependencies on SOC_INTEL_COMMON_PCH_BASE and
several other common block devices. Add COMMON_PCH_BASE and
COMMON_PCH_SERVER to pick up LOCKDOWN and the dependencies.
COMMON_PCH_SERVER adds the following common devices that were not
previously included by XEON_SP:
SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG
SOC_INTEL_COMMON_BLOCK_CSE
SOC_INTEL_COMMON_BLOCK_GPIO_ITSS_POL_CFG
SOC_INTEL_COMMON_BLOCK_ITSS
SOC_INTEL_COMMON_PCH_LOCKDOWN
SOC_INTEL_COMMON_BLOCK_SATA
SOC_INTEL_COMMON_BLOCK_SMBUS
SOC_INTEL_COMMON_BLOCK_XHCI
Change-Id: Iab97123e487f4f13f874f364a9c51723d234d4f0
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If bit 0 of byte 0x47 is set FSP will perform full memory training
even if previously saved data is supplied.
Up to and including FSP 2021 WW01 it was reset internally at the end
of PostMemoryInit. Starting with WW03 this is no longer the case and
Intel advised that this bit should be reset externally if valid MRC
data is present.
Change-Id: I9c4191d2fa2e0203b3464dcf40d845ede5f14c6b
Signed-off-by: Deomid "rojer" Ryabkov <rojer9@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Fill the ECC type in `struct memory_info` in romstage, and in SoC code.
The SMBIOS override is unnecessary, and this is not mainboard-specific.
Change-Id: I8370b3ee7d75914b895946b53923598adf87b522
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50179
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This has been tested on the OCP Delta Lake platform.
Change-Id: I07c882077eb3c035faae81641bc860e69db224b4
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
This adds functionality to mask certain IIO errors on the root complex as recommended by HW vendor.
Tested on DeltaLake mainboard. Boot to OS, verify IIO mask registers are programmed correctly.
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Change-Id: I99f05928930bbf1f617c2d8ce31e8df2a6fd15e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
As per document 336067-007US (C620 PCH datasheet), add macros for all
bits in the SMI_STS register. These will be used in common code.
Change-Id: I1cf4b37e2660f55a7bb7a7de977975d85dbb1ffa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50915
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This only makes sense if relocation via MSR is possible, to relocate
APs in parallel. xeon_sp hardware does not support these MSR.
TESTED: ocp/deltalake boots fine. SMM is relocated on CPU 0 just like
all other cores.
Change-Id: Ic45e6985093b8c9a1cee13c87bc0f09c77aaa0d2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add MMCONF_BUS_NUMBER=256 as this was not defined for
this SoC.
Change-Id: I6ba861d3b7d5ac083c9b16c8f6ad179efd403bcd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This function is more convenient to get the value of a single bus number
than get_cpubusnos(). Now get_cpubusnos is not used anywhere, so remove
it.
Change-Id: I71c06c2d69344d97e48609e67a3966ed8c671152
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
ACPI S3 is a global state and it is no longer needed to
pass it as a parameter.
Change-Id: Id0639a47ea65c210b9a79e6ca89cee819e7769b1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Override SMBIOS type 4 max speed. This field should be maximum speed
supported by the system. 3900MHz is expected for Cooper Lake.
Tested=Execute "dmidecode -t 4" to check max speed is correct.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I67edf657a2fe66b38e08056d558e1b360c4b8adc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Because ACM already does TPM initialization.
Change-Id: I49cc3b0077b220b0ca0bfa048be1e3d3d7023b05
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Get rid of custom microcode caching in MPinit and SGX code and
use the caching introduced in intel_microcode_find() instead.
Change-Id: If3ccd4dcff221c88839ffeafa812f4c38cede63f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This cleans up the postcar frame setup, which now gets used instead of
just going with TempRamExit MTRR's.
Note that ramstage CPU init sets up different final MTRRs anyway.
TESTED on ocp/deltalake and ocp/tiogapass.
Change-Id: I756c2d479fef859a460696300422f08013a300f1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Only specify the type of MMCONF_BASE_ADDRESS and MMCONF_BUS_NUMBER once.
Change-Id: Iacd2ed0dae5f1fb6b309124da53b3fa0eef32693
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50032
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The values can be used during SMBIOS type 16 creation.
Tested=On OCP Delta Lake, dmidecode -t 16 to verify.
Handle 0x000A, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Single-bit ECC
Maximum Capacity: 1146 GB
Error Information Handle: Not Provided
Number Of Devices: 6
Change-Id: Id8f92dc96a7a3eb2e6db330adda98a7fe6d516c8
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add the soc_scpi_name to the soc pci_ops. This is used by ACPI table
generation and required by the intel common XHCI device.
Change-Id: Idc09d53f14dfb1e42f904dfd4e87e8c09e155135
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
With top-aligned bootblock this is no longer globally needed.
The default maximum is now a generous 256 KiB with couple
platforms having lower limits of 32 KiB and 64 KiB.
Change-Id: Ib1aee44908c0dcbc17978d3ee53bd05a6200410c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add the soc ACPI _CST table.
The table may be customized to support the different state
combinations and set by the mainboard config.
Tested on deltalake with acpi_idle driver.
Note, intel_idle may not use ACPI _CST table.
Change-Id: I359daa9556edbe263ab0a7f1849c96c8fe1a0da0
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Drop the old, redundant code for mirroring LPC registers to DMI and make
use of the new common code.
Select the new Kconfig option for LPC DMI mirroring by the option
SOC_INTEL_COMMON_PCH_BASE, which is selected by platforms starting with
SPT, except APL and Xeon-SP. For Xeon-SP, select DMI and the new Kconfig
directly.
APL, even though it's younger than SPT, does not need mirroring.
Test: Set LGMR address by calling `lpc_open_mmio_window` and check that
both the PCI cfg and DMI LGMR register get written correctly.
Tested successfully on clevo/cml-u.
Change-Id: Ibd834f1474d986646bcebb754a17db97831a651f
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Commit 393992f (cpu/mp_init: Fix microcode lock) fixed the semantics
of parallel loading microcode updates.
So now '*parallel = 1' really means loading MCU in parallel, which
seems to fail inconsistently on around 10% of the APs.
Change-Id: I755dd302abbb58537d840852e8e290bea282a674
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49671
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The xeon_sp/cpx has a second 'rc' heap inside FSP-M that is statically
allocated at the start of CAR. This breaks FSP 2.0 specification. This
can be worked around in the linker scripts to make sure coreboot and
FSP-M don't fight over the same memory.
Tested
- on ocp/deltalake: boot and the "Smashed stack detected in
romstage!" message at the end of romstage is gone.
- qemu/i440fx: BUILD_TIMELESS=1 results in the same binary.
Change-Id: I6d02b8a46a2a8ef00f34d8f257595d43f5d3d590
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
The code for setting the LPC generic memory range uses an array of fixed
address ranges not needing explicit decoding, to decide if the address
needs to be written to the LGMR register. Most platforms only mistakenly
add the PCH reserved mmio range, that is not decoded generally,
effectively breaking the mechanism. Only APL uses the array correctly.
That code, in it's current state, does not work (except for APL) and
currently, there is not a single user. Thus, drop it before people start
using it.
Change-Id: I723415fedd1b1d95c502badf7b0510a1338b11ac
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Only amd/picasso and amd/stoneyridge have reference to
PCNT and that could be replaced with acpigen.
Remove the PCNT name from GNVS OperationRegion elsewhere.
Change-Id: I7dd45a840b3585fd24c31fd923b991c34ab4d783
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
- Return the busno based on the stack number.
- Replace pci_mmio_read_config32 with pci_io_read_config32 to get the
register value before mapping the MMIOCFG space.
- Remove the plural `s` as the function now provides one bus number.
Change-Id: I6e78e31b8ab89b1bdcfdeffae2e193e698385186
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change drops the parameter `struct device *dev` from the function
`soc_get_gen_io_dec_range()`. This function uses the parameter dev to
get a pointer to config structure for extracting the decode ranges
configured by mainboard in device tree. However, there is no separate
chip driver for the LPC device which means that the SoC code can use
`config_of_soc()` to get to SoC chip config instead of using the LPC
device.
This change is being done in preparation to clean up the device
tree/chip config access in early stages that allows for optimizing
the inclusion of device tree elements in the early stages.
Change-Id: I3ea53ddc771f592dd0ea5e5e809be2d2eff7f16d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This was used as a guard to not raise SMI with
APM_CNT_GNVS_UPDATE. The handler has been removed
now completely.
Change-Id: I7726367fd16630aa4b4b25b24b05f740645066db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This change adds the required gpio operations struct to soc/common gpio
code and hooks them up in all socs currently using the gpio block code,
except DNV-NS, which is handled in a separate change.
Also, add the gpio device to existing chipset devicetrees.
Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with
CB:48711 and OCP DeltaLake with CB:48672.
Change-Id: I81dbbf5397b28ffa7537465c53332779245b39f6
Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48583
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
