abuild checks the path for toolchains prior to building a
mainboard. It didn't check xgcc/, which would be picked up
by the coreboot make, and fail to build when it shouldn't.
Change-Id: If0ca4238e8c57a6b015fdad623ccdbf237ef1ba6
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/3350
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This new tool called `ifdfake` just creates an empty Intel Firmware
Descriptor (IFD) and writes the IFD signature plus the section layout
given on the command line.
usage: ifdfake [(-b|-m|-g|-p) <start>:<end>]... <output file>
-b | --bios <start>:<end> BIOS region
-m | --me <start>:<end> Intel ME region
-g | --gbe <start>:<end> Gigabit Ethernet region
-p | --platform <start>:<end> Platform Data region
-h | --help print this help
<start> and <end> bounds are given in Bytes, the <end> bound is inclusive.
All regions must be multiples of 4K in size and 4K aligned.
The descriptor region always resides in the first 4K.
An IFD created with ifdfake won't work as a replacement for a real IFD.
Never try to flash such an IFD to your board!
The output of ifdfake can be utilized to build an image with just the
later added sections (like coreboot itself) being valid. The resulting
image can then be partially written to a machines flash ROM to just
update coreboot (i.e. the BIOS section).
Change-Id: I925b47cab5c6d490a79d684bdd7a7a45ac442640
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3523
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There are no files to build left under AMD nortbridge/x/root_complex
directories. For some cases, even the Kconfig file was no longer sourced.
Remove all such references and empty files.
For devicetree.cb treat component paths with "/root_complex" in them valid
even when the directory does not exists. This is because AMD boards us this
dummy chip component as the root node in their devicetree.cb.
The generated devicetree file static.c remains unchanged.
Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3434
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Also, add pretty printing of Westmere's DMI registers (tested on my t410s
by staring at non-zero output values :)
Apparently Nehalem does not have a MEMBAR? But there are some
documented memory controller control registers in PCI configuration
space... left out for now.
The PCIEXBAR is not documented publicly AFAICT, but there is
a similar register on a device on bus 0xFF. phcoder might know more...
Change-Id: I5faadb6e4f701728f5290276c02809b4993bd86d
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3505
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
e4e8e090fa does add support for QM57,
but there are many more that should work with that code(?).
Does not explode on...
CPU: Processor Type: 0, Family 6, Model 25, Stepping 2
Northbridge: 8086:0044 (1st generation (Westmere family) Core Processor)
Southbridge: 8086:3b0f (QS57)
Change-Id: I85e15ba45678a5bd635415a7a8d69c05bff8f7ef
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3321
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
This is spkmodem receiver counterpart.
Change-Id: Id27d32608502029fb6fcc8154f508811bf5ca77b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/3411
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
While some of the case .. break statement actually weren't needed,
too are, since otherwise the option parsing loop hangs.
Exit conditions for that endless loop: "--" or no more arguments,
in line with GNU command line parsing rules.
Change-Id: I0dbc35e530fb8c93a0f7de05ac47f325555ad4a4
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3418
Tested-by: build bot (Jenkins)
Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
Added support for Intel Atom cpu to msrtool
Fixed a cut&paste error in nehalem msr bits definition
It has been tested with a N455 cpu and msrtool output can be review at:
http://www.trillion01.com/coreboot/msrtool_atom.txt
Change-Id: I0ecf455b559185e2d16fa1a655bf021efc2ef537
Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net>
Reviewed-on: http://review.coreboot.org/3351
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
viatool is a utility for extracting useful for extracting certain configuration
bits on VIA chipsets and CPUs. It is a fork of inteltool.
viatool is currently focused on "quirks". Quirks are device configurations that
cannot be accessed directly. They are implemented as hierarchical configurations
in the PCI or memory address spaces (index/data register pairs). Such
configurations refer to hardware parameters that are board specific. Those
parameters would otherwise be difficult to extract from a system running the
vendor's firmware.
viatool also preserves inteltool's MSR dumps. VIA CPU and Intel CPU MSRs are
nearly identical.
Change-Id: Icbd39eaf7c7da5568732d77dbf2aed135f835754
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/1430
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Bash case statements are terminated with ';;'.
Unlike C, bash case statements will not continue to the next case. No 'break' is needed.
Change-Id: I62e7e91f3223ac4052728a1ca12a4681af0dc036
Signed-off-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
Reviewed-on: http://review.coreboot.org/3330
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use PRIx64 to print a u64 instead of "llx". Fixes the following error:
cbmem.c: In function 'parse_cbtable':
cbmem.c:135:2: error: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'u64' [-Werror=format=]
Change-Id: Ibc2bf8597cb86db5b2e71fba77ec837a08c5e3d4
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3301
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
buildgcc has many wrong choices, and two right ones,
but you would never guess that. It's even more
frustrating when it spends lots of time building a
full tool chain and you find out it's not the one you
wanted and, still worse, you've forgotten what it does want
and, even worse, it won't f-ing tell you what the two
right choices are!.
Have it tell you when you've done something wrong, and have it
make reasonable decisions when you say things like
-p arm
instead of
-p armv7a-eabi
This change lowers my blood pressure 10 points.
Change-Id: I44a59d7cb7a6260894d8bcb692a693ed25681ff8
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/3292
Tested-by: build bot (Jenkins)
Properly check the dependency of choices as a group.
Also fix that sym_check_deps() correctly terminates the dependency loop
error check (otherwise it would continue printing the dependency chain).
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
=======
Cherry-picked from the Linux kernel.
Change-Id: I0c98760dd0f55cf2ff70c53e0b014288b59574c8
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3290
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Fix reversal of dlg.border.atr and dlg.dialog.atr for draw_box()
Makes the inputbox look like expected
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
=======
Cherry-picked from the Linux kernel.
Change-Id: I596915aab0204ef0e392fefa56fad8e25204e207
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3289
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
As choice dependency are now fully checked, it's quite easy to add support
for named choices. This lifts the restriction that a choice value can only
appear once, although it still has to be within the same group,
but multiple choices can be joined by giving them a name.
While at it I cleaned up a little the choice type logic to simplify it a
bit.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
=======
Cherry-picked from the Linux kernel.
Change-Id: If0f00d1783907d606220cda5307b8960d3bfc38d
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3291
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
right now this is just a fake option to get rid of ifdefs in
coreboot's code.
Change-Id: I59233f3c1d266b4e716a5921e9db298c7f96751d
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3225
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
This option has never had much if any use. It solved a problem over 10
years ago that resulted from an argument over the value or lack thereof
of including all the debug strings in a coreboot image. The answer is
in: it's a good idea to maintain the capability to print all messages,
for many reasons.
This option is also misleading people, as in a recent discussion, to
believe that log messges are controlled at build time in a way they are
not. For the record, from this day forward, we can print messages at all
log levels and the default log level is set at boot time, as directed by
DEFAULT_CONSOLE_LOGLEVEL. You can set the default to 0 at build time and
if you are having trouble override it in CMOS and get more messages.
Besides, a quick glance shows it's always set to max (9 in this case) in
the very few cases (1) in which it is set.
Change-Id: I60c4cdaf4dcd318b841a6d6c70546417c5626f21
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/3188
Tested-by: build bot (Jenkins)
We write CMOS data to 128 byte files, which is a problem
when using them later-on (eg. as part of a coreboot image)
where nvramtool assumes them to be 256 byte, and so data
corruption occurs.
Change-Id: Ibc919c95f6d522866b21fd313ceb023e73d09fb9
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/3186
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update crossgcc to use gcc 4.7.3
The resulting coreboot.rom is not runtime tested (any volunteers?).
Drop the texinfo patch, rename the armv7a patch.
Some Linux distributions have moved on to gcc 4.8,
under certain circumstances this version can't (cross-)compile gcc 4.7.2
Bug report: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=56927
Change-Id: Id8ce5f86c34e1a0900d44dc6ae4e81cb9548ecc2
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/3112
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
cbmem currently fails to build due to `-Werror` and the following
warning.
$ make
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
cbmem.c: In function ‘map_memory’:
cbmem.c:87:2: error: format ‘%zx’ expects argument of type ‘size_t’, but argument 2 has type ‘off_t’ [-Werror=format]
[…]
Casting the argument of type `off_t` to `intmax_t` and using the
length modifier `j`
$ man 3 printf
[…]
j A following integer conversion corresponds to an intmax_t or uintmax_t argument.
[…]
instead of `z` as suggested in [1] and confirmed by stefanct and
segher in #coreboot on <irc.freenode.net>, gets rid of this warning
and should work an 32-bit and 64-bit systems, as an `off_t` fits
into `intmax_t`.
[1] http://www.pixelbeat.org/programming/gcc/int_types/
Change-Id: I1360abbc47aa1662e1edfbe337cf7911695c532f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3083
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When building inteltool with Clang, it warns about the following.
$ clang --version
Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2)
Target: i386-pc-linux-gnu
Thread model: posix
$ CC=clang make
[…]
clang -O2 -g -Wall -W -c -o pcie.o pcie.c
pcie.c:297:40: warning: signed shift result (0xFF0000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
pciexbar_phys = pciexbar_reg & (0xff << 28);
~~~~ ^ ~~
pcie.c:301:41: warning: signed shift result (0xFF8000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
pciexbar_phys = pciexbar_reg & (0x1ff << 27);
~~~~~ ^ ~~
pcie.c:305:41: warning: signed shift result (0xFFC000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
pciexbar_phys = pciexbar_reg & (0x3ff << 26);
~~~~~ ^ ~~
3 warnings generated.
[…]
Specifying the length by using the suffix `0xffULL` fixes these issues
as now enough bits are available.
These issues were introduced in commit 1162f25a [1].
commit 1162f25a49
Author: Stefan Reinauer <stepan@coresystems.de>
Date: Thu Dec 4 15:18:20 2008 +0000
Patch to util/inteltool:
* PMBASE dumping now knows the registers.
* Add support for i965, i975, ICH8M
* Add support for Darwin OS using DirectIO
[1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=1162f25a49e8f39822123d664cda10fef466b351
Change-Id: I7b9a15b04ef3bcae64e06266667597d0f9f07b79
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3015
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now users can use a different compiler from GCC like Clang by for example
doing `CC=clang make`.
Change-Id: I664a36df79f7496a56d89bdb61948b2eda33a6b4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3082
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In [1] Idwer Vollering noted, that the type `u64` is not portable so
on his FreeBSD system, the following warning is shown.
$ clang -O2 -Wall -W -I/usr/local/include -c -o amb.o amb.c
amb.c:441:22: error: use of undeclared identifier 'u64'
ambconfig_phys = ((u64)pci_read_long(dev16, 0x4c) << 32) |
The type `uint64_t` seems to be defined also on FreeBSD, so using this
fixes the warning.
Note, this warning is not reproducable with Debian Sid/unstable for
example. I have no idea why though.
[1] http://review.coreboot.org/#/c/3015/
Change-Id: Ic22f4371114b68ae8221d84a01fef6888d43f365
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3086
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Currently on a 32-bit system cbmem fails to build due to `-Werror`
and the following warning.
$ make
cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c
[…]
cbmem.c: In function ‘parse_cbtable’:
cbmem.c:135:2: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘u64’ [-Werror=format]
cc1: all warnings being treated as errors
[…]
Using the length modifier `ll` instead of `l` gets rid of this
warning.
Change-Id: Ib2656e27594c7aaa687aa84bf07042933f840e46
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3084
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Cppcheck warns about a memory leak, present since adding romtool,
which was renamed to cbfstool, in commit 5d01ec0f.
$ cppcheck --version
Cppcheck 1.59
[…]
[cbfs-mkstage.c:170]: (error) Memory leak: buffer
[…]
Indeed the memory pointed to by `buffer` is not freed on the error path,
so add `free(buffer)` to fix this.
Change-Id: I6cbf82479027747c800c5fe847f20b779e261ef4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3069
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The URL to acpica-unix-20121114 has changed, update the URL.
Change-Id: I1c8c228094f19455af3682f36f1990586fe3934c
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/3070
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Current code outputs the whole cbmemc buffer even if only part of
it is really used. Fix it to output only the used part and notify
the user if the buffer was too small for the required data.
Change-Id: I68c1970cf84d49b2d7d6007dae0679d7a7a0cb99
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/2991
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The LZMA glue code in cbfstool was recently rewritten from C++
to plain C code in:
commit aa3f7ba36e
Author: Stefan Reinauer <reinauer@chromium.org>
Date: Thu Mar 28 16:51:45 2013 -0700
cbfstool: Replace C++ code with C code
Reviewed-on: http://review.coreboot.org/3010
In the progress of doing so, the stream position for the
input stream and output stream was not reset properly. This
would cause LZMA producing corrupt data when running the
compression function multiple times.
Change-Id: I096e08f263aaa1931517885be4610bbd1de8331e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3040
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This fixes at least one warning on my machine where "llx" is replaced by PRIx64.
Change-Id: Iee3e5027d327d4d5f8e6d8b2d53d051f74bfc354
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3024
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Cppcheck [1], a static code analysis tool, warns about the
following.
$ cppcheck --version
Cppcheck 1.59
$ cppcheck --enable=all .
[…]
Checking cpu.c...
[cpu.c:951]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list.
[cpu.c:962]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list.
[…]
And indeed, `core` is an unsigned integer and `man 3 printf` tells
the following about conversion specifiers.
d, i The int argument is converted to signed decimal notation. […]
o, u, x, X
The unsigned int argument is converted to unsigned octal (o), unsigned decimal (u), or unsigned hexadecimal (x and X)
notation.
So use `u` and Cppcheck does not complain anymore.
[1] http://cppcheck.sourceforge.net/
Change-Id: If8dd8d0efe75fcb4af2502ae5100e3f2062649e4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3026
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Nico Huber spotted [1], that commit (4d6ab4e2) [1] updating
superiotools’s `README` with the Git command line
superiotool: Update README with Git repository URL and directory location
missed, that after `git clone` one sitll has to change into
the cloned directory.
So prepend the path with `coreboot/` to fix that. The same error
happened in the commit (e1ea5151) for libpayload [2]
libpayload: Update README with Git repository URL and directory location
and is fixed in this patch too.
[1] http://review.coreboot.org/#/c/3019/
[2] http://review.coreboot.org/2228
Change-Id: Ib6e8b678af6276556a40ccfd52ae35ca7e674455
Reported-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3021
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
When building inteltool under x86-32, the following warnings are
shown.
$ gcc --version
gcc-4.7.real (Debian 4.7.2-15) 4.7.2
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ make
[…]
amb.c: In function ‘amb_read_config32’:
amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
amb.c: In function ‘amb_read_config16’:
amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
amb.c: In function ‘amb_read_config8’:
amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
[…]
Nico Huber commented the following [1].
I don't see those warnings because I build for x86-64. I guess
they could be fixed by casting to `ptrdiff_t` (from stddef.h)
instead of `uint64_t`.
And indeed, using `ptrdiff_t` fixes the warning. But as Stefan
Reinauer commented in [2], `intptr_t` is more appropriate as this
is just a pointer and no pointer difference.
So `intptr_t` is taken, which fixes these issues warned about too.
These warnings were introduced in commit »inteltool: Add support for
dumping AMB registers« (4b7b320f) [3].
[1] http://review.coreboot.org/#/c/2996/1//COMMIT_MSG
[2] http://review.coreboot.org/#/c/3002/1/util/inteltool/amb.c
[3] http://review.coreboot.org/525
Change-Id: I2ea1a31dc1e3db129e767d6a9e0433fd75a77d0f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3002
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
When buidling inteltool with GCC, the following warning is printed.
$ make
[…]
gcc -O2 -g -Wall -W -c -o memory.o memory.c
memory.c: In function ‘print_mchbar’:
memory.c:287:7: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘uint64_t’ [-Wformat]
[…]
This was introduced in commit »inteltool: Add support for H65 Express
chipset« (c7fc4422) [1].
Address this warning, by using `%llx` instead of `%lx`.
[1] http://review.coreboot.org/1258
Change-Id: I4f714edce7e8b405e1a7a417d02fa498322c88a8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2994
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Tested-by: build bot (Jenkins)
cbfstool was using a C++ wrapper around the C written LZMA functions.
And a C wrapper around those C++ functions. Drop the mess and rewrite
the functions to be all C.
Change-Id: Ieb6645a42f19efcc857be323ed8bdfcd9f48ee7c
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3010
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The help text says --machine, but the code
actually checked for --arch. Fix it!
Change-Id: Ib9bbf758b82ef070550348e897419513495f154b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3009
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Allow to override the variables `CC`, `INSTALL`, `PREFIX`,
`CFLAGS` and `LDFLAGS`. Though append `-lpci -lz` to `LDFLAGS`.
This way for example a different compiler can easily be used.
CC=clang make
As a side note, Clang in contrast to GCC does *not* issue the
following warnings.
$ clang --version
Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2)
Target: i386-pc-linux-gnu
Thread model: posix
$ gcc --version
gcc-4.7.real (Debian 4.7.2-15) 4.7.2
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ make
[…]
amb.c: In function ‘amb_read_config32’:
amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
amb.c: In function ‘amb_read_config16’:
amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
amb.c: In function ‘amb_read_config8’:
amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
[…]
These are only shown under 32-bit and not 64-bit
$ uname -m
i686
and are going to be fixed in a separate patch.
Change-Id: Id75dea081ecb35390f283520a7e5dce520f4c98d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2996
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds the power management register definitions for Intel's Cougar
Point and Panther Point platform controller hubs (PCH). The definitions
are actually a subset of the older ICH10R registers: I've added just
those that are mentioned in the public specifications in [1] and [2].
I've tested dumping with an H77 PCH.
NM70 is missing in [1]. Therefore, I didn't add it here.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
Document-Number: 324645-006
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
Datasheet
Document-Number: 326776-003
Change-Id: Ia6945fe96cd96b568ed5191e91dbba5556e1ee95
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds the PCI IDs of Intel's Cougar Point and Panther Point platform
controller hubs (PCH) to the dumping of the root complex configuration
under the root complex base address (RCBA). Those PCHs are handled exactly
as the older ICHs which can be seen in [1] and [2]. I've tested dumping
with an H77 PCH.
NM70 is missing in [1]. Therefore, I didn't add it here.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
Document-Number: 324645-006
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
Datasheet
Document-Number: 326776-003
Change-Id: I2296caae57e614171300362d41715deecec77762
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2986
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This way for example a different compiler can easily be used.
CC=clang make
Change-Id: I50b83554fd4826d00d87e60a30eb1f6a88834397
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2935
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This adds the GPIO register definitions for Intel's Cougar Point and
Panther Point platform controller hubs (PCH). All information is taken
from the public specifications in [1] and [2]. I've tested it with an
H77 PCH.
NM70 is missing in [1]. Therefore, I didn't add it here.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
Document-Number: 324645-006
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
Datasheet
Document-Number: 326776-003
Change-Id: I31711e24f852e68b3c113e3bd9243dc7e89ac197
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2961
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds correspondings #defines for the PCI IDs of the LPC device on
Intel's Cougar Point and Panther Point platform controller hubs. Those
will be used more in later commits.
I've checked all those IDs against the specification updates [1] and [2].
[1] Intel 6 Series Chipset and Intel C200 Series Chipset Specification
Update
Document-Number: 324646-019
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH)
Family - Datasheet Specification Update
Document-Number: 326777-010
Change-Id: Ibef5a30d283c568c345eb8d8149723e7a3049272
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2960
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If you have a recent version of texinfo installed, building the reference
toolchain fails with the following error:
(in util/crossgcc/build-gcc/crossgcc-build.log)
[...]/gcc-4.7.2/gcc/doc/cppopts.texi:806: @itemx must follow @item
Looks like a warning-became-an-error problem in texinfo, to me. Fix that by
making every erroneous @itemx an @item.
Change-Id: I685ae1ecfee889b7c857b148cfab7411a10e7ecd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2939
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Add support for filling in the Firmware Interface Table.
For now it only supports adding microcode entries.
It takes 2 options:
1. Name of file in cbfs where the mircocode is located
2. The number of empty entries in the table.
Verified with go firmware tools. Also commented out updating
microcode in the bootblock. When romstage runs, the CPUs indicate
their microcode is already loaded.
Change-Id: Iaccaa9c226ee24868a5f4c0ba79729015d15bbef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2712
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
- The read-only structures are const now
- cosmetic fixes
- put { on a new line for functions
- move code after structures
Change-Id: Ib9131b80242b91bd5105feaebdf8306a844da1cc
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2922
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
In commit e820e5cb3a titled
"Make xcompile support multiple architectures" the LINKER_SUFFIX
variable was introduced to bypass gold if the bfd linker was
available. However, the LINKER_SUFFIX wasn't honored when
the compiler evironment variables were set. Fix the original
intention.
Change-Id: I608f1e0cc3d0bea3ba1e51b167d88c66d266bceb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When calculating initial CBFS empty entry space, the size of header itself must
be not included (with the reserved space for entry name). This is a regression
of the old cbfstool size bug.
Before this fix, in build process we see:
OBJCOPY cbfs/fallback/romstage_null.bin
W: CBFS image was created with old cbfstool with size bug.
Fixing size in last entry...
And checking the output binary:
cbfstool build/coreboot.pre1 print -v -v
DEBUG: read_cbfs_image: build/coreboot.pre1 (262144 bytes)
DEBUG: x86sig: 0xfffffd30, offset: 0x3fd30
W: CBFS image was created with old cbfstool with size bug.
Fixing size in last entry...
DEBUG: Last entry has been changed from 0x3fd40 to 0x3fd00.
coreboot.pre1: 256 kB, bootblksz 688, romsize 262144, offset 0x0 align: 64
Name Offset Type Size
(empty) 0x0 null 261296
DEBUG: cbfs_file=0x0, offset=0x28, content_address=0x28+0x3fcb0
After this fix, no more alerts in build process.
Verified to build successfully on x86/qemu and arm/snow configurations.
Change-Id: I35c96f4c10a41bae671148a0e08988fa3bf6b7d3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2731
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cbfstool usage change:
"-a" for "cbfstool locate" can specify base address alignment.
To support putting a blob in aligned location (ex, microcode needs to be aligned
in 0x10), alignment (-a) is implemented into "locate" command.
Verified by manually testing a file (324 bytes) with alignment=0x10:
cbfstool coreboot.rom locate -f test -n test -a 0x10
# output: 0x71fdd0
cbfstool coreboot.rom add -f test -n test -t raw -b 0x71fdd0
cbfstool coreboot.rom print -v -v
# output: test 0x71fd80 raw 324
# output: cbfs_file=0x71fd80, offset=0x50, content_address=0x71fdd0+0x144
Also verified to be compatible with old behavior by building i386/axus/tc320
(with page limitation 0x40000):
cbfstool coreboot.rom locate -f romstage_null.bin -n romstage -P 0x40000
# output: 0x44
cbfstool coreboot.rom locate -f x.bin -n romstage -P 0x40000 -a 0x30
# output: 0x60
Change-Id: I78b549fe6097ce5cb6162b09f064853827069637
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2824
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
cbfstool usage change:
The "-a" parameter for "cbfstool locate" is switched to "-P/--page-size".
The "locate" command was used to find a place to store ELF stage image in one
memory page. Its argument "-a (alignment)" was actually specifying the page size
instead of doing memory address alignment. This can be confusing when people are
trying to put a blob in aligned location (ex, microcode needs to be aligned in
0x10), and see this:
cbfstool coreboot.rom locate -f test.bin -n test -a 0x40000
# output: 0x44, which does not look like aligned to 0x40000.
To prevent confusion, it's now switched to "-P/--page-size".
Verified by building i386/axus/tc320 (with page limitation 0x40000):
cbfstool coreboot.rom locate -f romstage_null.bin -n romstage -P 0x40000
# output: 0x44
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Change-Id: I0893adde51ebf46da1c34913f9c35507ed8ff731
Reviewed-on: http://review.coreboot.org/2730
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
This is a bit of a hack but it's very handy. It compiles in your static.c
and then shows what coreboot would see when it is run. It uses your static.c
and functions pulled from src/device/device_util.c.
I've already used it to debug problems with the snow device tree.
I'm waiting someone to tell me this is already written :-)
Change-Id: Ia8c8a5d08d8757bec49eaf70473efa701bc56581
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2767
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.
The following command was used to convert all files.
$ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/'
[1] http://www.gnu.org/licenses/gpl-2.0.txt
Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Instead of trying to map the first megabyte, only map what is
required to read the tables.
Change-Id: I9139dbc8fd1dd768bef7ab85c27cd4c18e2931b3
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2485
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Instead, ignore them. One is as non-standard as the other
and ignoring is more convenient since we don't need to
guard prototypes with #ifndef __ROMCC_ all the time.
Change-Id: I7be93a2ed0966ba1a86f0294132a204e6c8bf24f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2424
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>
The "offset" in cbfs-mkpayload should be printed as type %lu
instead of %d as `gcc` rightfully warns about.
gcc -g -Wall -D_7ZIP_ST -c -o /srv/filme/src/coreboot/util/cbfstool/cbfs-mkpayload.o cbfs-mkpayload.c
cbfs-mkpayload.c: In function ‘parse_fv_to_payload’:
cbfs-mkpayload.c:284:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
cbfs-mkpayload.c:296:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
This warning was introduced in the following commit.
commit 4610247ef1
Author: Patrick Georgi <patrick@georgi-clan.de>
Date: Sat Feb 9 13:26:19 2013 +0100
cbfstool: Handle alignment in UEFI payloads
Reviewed-on: http://review.coreboot.org/2334
Change-Id: I50c26a314723d45fcc6ff9ae2f08266cb7969a12
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2440
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
The name lapic_cluster is a bit misleading, since the construct is not local
APIC specific by concept. As implementations and hardware change, be more
generic about our naming. This will allow us to support non-x86 systems without
adding new keywords.
Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2377
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The name pci_domain was a bit misleading, since the construct is only
PCI specific in a particular (northbridge/cpu) implementation, but not
by concept. As implementations and hardware change, be more generic
about our naming. This will allow us to support non-PCI systems without
adding new keywords.
Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2376
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
On hosts using non-GNU make as default make program (ex, FreeBSD's default is
BSD make and having GNU make as "gmake"), building acpica will fail. We should
use the correct path of make $(MAKE).
Verified to build on FreeBSD 9.0 with gcc 4.7 from ports. Note, the shipped gcc
in FreeBSD 9.0 is 4.2.1 and needs more patches to remove -Wbad-function-case and
-Wempty-body. That should be fixed in a future patch.
Change-Id: Iacbf5a05e84a8a53d9d3e783a10131de603282c9
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tiano for X64 is much cleaner to start up when using higher alignments in
firmware volumes. These are implemented using padding files and sections
that cbfstool knew nothing about. Skip these.
Change-Id: Ibc433070ae6f822d00af2f187018ed8b358e2018
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2334
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On platforms with CBFS data filling end of ROM image without bootblock in the
end (ex, ARM), calculation of "next valid entry" may exceed ROM image buffer in
memory and raise segmentation fault when we try to compare its magic value.
To fix this, always check if the entry address is inside ROM image buffer.
Verified to build and boot successfully on qemu/x86 and armv7/snow.
Change-Id: I117d6767a5403be636eea2b23be1dcf2e1c88839
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2330
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
In case that the new toolchains don't work well, we can trace back
and reproduce the old tools by checking the xgcc folder. It is useful
when my team members need to get my old toolchains on their own host
machines.
Change-Id: I54e4bc6afcfbbf622165af6eae27bbb6efc2e8cc
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2247
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
For arm/snow, current bootblock is larger than previously assigned CBFS offset
and will fail to boot. To prevent this happening again in future, cbfstool now
checks if CBFS will overlap bootblock.
A sample error message:
E: Bootblock (0x0+0x71d4) overlap CBFS data (0x5000)
E: Failed to create build/coreboot.pre1.tmp.
arm/snow offset is also enlarged and moved to Kconfig variable.
Change-Id: I4556aef27ff716556040312ae8ccb78078abc82d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2295
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Right now cbfstool only accepts firmware volumes with
a x86 SEC core and refuses an x86-64 SEC core because
some magic values and the extended PE header are
different. With this patch, both IA32/x64 images are
supported. (No check is done whether the mainboard
actually supports 64bit CPUs, so careful!)
This needs another patch to Tiano Core that switches
to long mode after jumping to the 64bit entry point.
Right now that code assumes we're already in 64bit code
and the machine crashes.
Change-Id: I1e55f1ce1a31682f182f58a9c791ad69b2a1c536
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2283
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This removes the hack implemented in http://review.coreboot.org/#/c/2280
(and should make using 64bit Tiano easier, but that's not yet supported)
Change-Id: Ie30129c4102dfbd41584177f39057b31f5a937fd
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
add-payload, add-stage, and add-flat-binary are now all using cbfs_image API.
To test:
cbfstool coreboot.rom add-stage -f FILE -n fallback/romstage -b 0xXXXX
cbfstool coreboot.rom add-payload -f FILE -n fallback/pyload
And compare with old cbfstool.
Verified to boot on ARM(snow) and X86(qemu-i386).
Change-Id: If65cb495c476ef6f9d90c778531f0c3caf178281
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2220
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The "add" command is compatible with all legacy usage. Also, to support
platforms without top-aligned address, all address-type params (-b, -H, -l) can
now be ROM offset (address < 0x8000000) or x86 top-aligned address (address >
0x80000000).
Example:
cbfstool coreboot.rom add -f config -n config -t raw -b 0x2000
cbfstool coreboot.rom add -f stage -n newstage -b 0xffffd1c0
Verified boot-able on both ARM(snow) and x86(QEMU) system.
Change-Id: I485e4e88b5e269494a4b138e0a83f793ffc5a084
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2216
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Usage Changes: To support platforms with different memory layout, "create" takes
two extra optional parameters:
"-b": base address (or offset) for bootblock. When omitted, put bootblock in
end of ROM (x86 style).
"-H": header offset. When omitted, put header right before bootblock,
and update a top-aligned virtual address reference in end of ROM.
Example: (can be found in ARM MAkefile):
cbfstool coreboot.rom create -m armv7 -s 4096K -B bootblock.bin \
-a 64 -b 0x0000 -H 0x2040 -o 0x5000
Verified to boot on ARM (Snow) and X86 (QEMU).
Change-Id: Ida2a9e32f9a459787b577db5e6581550d9d7017b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2214
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To support platforms without top-aligned address mapping like ARM, "locate"
command now outputs platform independent ROM offset by default. To retrieve x86
style top-aligned virtual address, add "-T".
To test:
cbfstool coreboot.rom locate -f stage -n stage -a 0x100000 -T
# Example output: 0xffffdc10
Change-Id: I474703c4197b36524b75407a91faab1194edc64d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2213
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Old cbfstool may produce CBFS image with calculation error in size of last empty
entry, and then corrupts master header data when you really use every bit in
last entry. This fix will correct free space size when you load ROM images with
cbfs_image_from_file.
Change-Id: I2ada319728ef69ab9296ae446c77d37e05d05fce
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2211
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To delete a component (file) from existing CBFS ROM image.
To test:
cbfstool coreboot.rom remove -n fallback/romstage
# and compare with old cbfstool output result.
Change-Id: If39ef9be0b34d8e3df77afb6c9f944e02f08bc4e
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2208
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change the "extract" command to use cbfs_export_entry API. Nothing changed in
its usage.
To verify, run "cbfstool coreboot.rom extract -f blah -n blah" and check if the
raw type file is correctly extracted.
Change-Id: I1ed280d47a2224a9d1213709f6b459b403ce5055
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2207
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Process CBFS ROM image by new cbfs_image API.
To verify, run "cbfstool coreboot.rom print -v" and compare with old cbfstool.
Change-Id: I3a5a9ef176596d825e6cdba28a8ad732f69f5600
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2206
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Current cbfstool implementation is relying on global variables to pass processed
data, and the calculation of address is based on x86 architecture (ex, always
assuming 0x0000 as invalid address), not easy to be used on platforms without
top-aligned memory mapping. This CL is a first step to start a new cbfstool
without global variables, and to prevent assuming memory layout in x86 mode.
The first published APIs are for reading and writing existing CBFS ROM image
files (and to find file entries in a ROM file).
Read cbfs_image.h for detail usage of each API function.
Change-Id: I28c737c8f290e51332119188248ac9e28042024c
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2194
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Many functions in cbfstool need to deal with a memory buffer - both location and
size. Right now it's made by different ways: for ROM image using global variable
(romsize, master_header); and in cbfs-* using return value for size and char**
to return memory location.
This may cause bugs like assuming incorrect return types, ex:
uint32_t file_size = parse(); // which returns "-1" on error
if (file_size <= 0) { ...
And the parse error will never be caught.
We can simplify this by introducing a buffer API, to change
unsigned int do_something(char *input, size_t len, char **output, ...)
into
int do_something(struct buffer *input, struct buffer *output, ...)
The buffer API will be used by further commits.
Change-Id: Iaddaeb109f08be6be84c6728d72c6a043b0e7a9f
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2205
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The syntax of cbfstool has been changed for a while (using getopt). Updated
EXAMPLE file to show the right way to test cbfstool.
Change-Id: I5cb41b76712d8c2403fffc9fdad83c61fb2af98c
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2215
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
The 'host_bigendian' variable (and functions relying on it like ntohl/htonl)
requires host detection by calling static which_endian() first -- which may be
easily forgotten by developers. It's now a public function in common.c and
doesn't need initialization anymore.
Change-Id: I13dabd1ad15d2d6657137d29138e0878040cb205
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2199
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The ELF parsing and payload building in add-flat-binary command should be
isolated just like mkpayload and mkstage.
Since the add-flat-binary command creates a payload in the end , move payload
processing to cbfs-mkpayload.c.
To test:
cbfstool coreboot.rom add-flat-binary -f u-boot.bin -n fallback/payload \
-l 0x100000 -e 0x100020
To verify, get output from "cbfstool coreboot.rom print -v":
fallback/payload 0x73ccc0 payload 124920
INFO: code (no compression, offset: 0x38, load: 0x1110000, length:..)
Change-Id: Ia7bd2e6160507c0a1e8e20bc1d08397ce9826e0d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2197
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Add -v (verbose) to every command, and allow printing debug messages.
Revise logging and debugging functions (fprintf(stderr,...), dprintf...)
and verbose message printing with following macros:
ERROR(xxx): E: xxx
WARN(xxx) W: xxx
LOG(xxx) xxx
INFO(...) INFO: xxx (only when runs with -v )
DEBUG(...) DEBUG: xxx (only when runs with more than one -v)
Example:
cbfstool coreboot.rom print -v
cbfstool coreboot.rom add -f file -n file -t raw -v -v
Normal output (especially for parsing) should use printf, not any of these
macros (see usage() and cbfs_locate(), cbfs_print_directory() for example).
Change-Id: I167617da1a6eea2b07075b0eb38e3c9d85ea75dc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2196
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
It's just good hygiene.
Change-Id: Ie7d4557c1d0dcf7fc015852c4c9b2eae29c4acfc
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2232
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Calling basename(3) may modify content. We should allocate another buffer to
prevent corrupting input buffer (full file path names).
Change-Id: Ib4827f887542596feef16e7829b00444220b9922
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2203
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently "cbfstool locate" outputs a hex number without "0x" prefix.
This makes extra step (prefix 0x, and then generate another temp file) in build
process, and may be a problem when we want to allow changing its output format
(ex, using decimal). Adding the "0x" in cbfstool itself should be better.
Change-Id: I639bb8f192a756883c9c4b2d11af6bc166c7811d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2201
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
cbfs-mk*.c does not work with real files / command line so header files with
file I/O and getopt can be removed.
Change-Id: I9d93152982fd4abdc98017c983dd240b81c965f5
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2200
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
cbfstool.c uses lots of global variables for command line options and all named
as "rom*". This may be confusing when other global variables also start with
rom, ex: int size = rom_size + romsize;
(rom_size is from command line and romsize is the size of last loaded ROM image).
If we pack all rom_* into a struct it may be more clear, ex:
do_something(param.cbfs_name, param.size, &romsize);
Change-Id: I5a298f4d67e712f90e998bcb70f2a68b8c0db6ac
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2195
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Added bits/bitfields descriptions and decoding values
into intel_core2_later.c file, which describe
MSRs for Intel processors, based on later Core 2
architecture.
Change-Id: If577c8ed944afe34f86944cc03a780fba6b3dbba
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1171
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
reference for Atom MSRs are from
Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3C: System Programming Guide, Part 3
Order Number 326019, January 2013, Table 35-4, 35-5
Has been successfully tested on the targeted cpu.
Change-Id: If94279caeab27121c63ec43c258dc962c167ad51
Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2192
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
$ git stripspace < util/runfw/googlesnow.c > /tmp/bla
$ mv /tmp/bla util/runfw/googlesnow.c
Introduced with original commit.
commit b867281a07
Author: Ronald G. Minnich <rminnich@gmail.com>
Date: Wed Jan 16 11:59:34 2013 -0600
Utility to run the snow bios in user mode
Change-Id: I146c07a918ef99e8ae3c0dd72cf28fae22312e43
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2183
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This program lets you test run a snow coreboot image in user mode
on a properly equipped arm system (usually an ARM chromebook).
This is a real time saver as you don't have to flash each time.
We've found and fixed some nasty bugs with this one.
Anyway, the instructions on how to use this are in the binary.
Change-Id: Ib555ef51fd7e930905a2ee5cbfda1cc6f068278e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2159
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Show what's in a stage or payload. This will let people better understand
what's in a stage or payload.
Change-Id: If6d9a877b4aedd5cece76774e41f0daadb20c008
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2176
Tested-by: build bot (Jenkins)
The ARMv7 toolchain is now also needed for abuild (at least
if you want to be able to compile ARM images)
Change-Id: If1253203a2198f7dea632ba45540222ba3361932
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2147
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
This replaces hard-coded bootblock offsets using the new scheme.
The assembler will place the initial branch instruction after BL1,
skip 2 aligned chunks, and place the remaining bootblock code after.
It will also leave an anchor string, currently 0xdeadbeef which
cbfstool will find. Once found, cbfstool will place the master CBFS
header at the next aligned offset.
Here is how it looks:
0x0000 |--------------|
| BL1 |
0x2000 |--------------|
| branch |
0x2000 + align |--------------|
| CBFS header |
0x2000 + align * 2 |--------------|
| bootblock |
|--------------|
TODO: The option for alignment passed into cbfstool has always been
64. Can we set it to 16 instead?
Change-Id: Icbe817cbd8a37f11990aaf060aab77d2dc113cb1
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2148
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The current path doesn't make much sense (unless you're Sven)
and may also incur a very long access penalty if /home happens
to be on a network mounted filesystem.
Change-Id: I8cfceb3cf237757ce9ea8f1953bce5a72691838a
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2153
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In order to provide some insight on what code is executed during
coreboot's run time and how well our test scenarios work, this
adds code coverage support to coreboot's ram stage. This should
be easily adaptable for payloads, and maybe even romstage.
See http://gcc.gnu.org/onlinedocs/gcc/Gcov.html for
more information.
To instrument coreboot, select CONFIG_COVERAGE ("Code coverage
support") in Kconfig, and recompile coreboot. coreboot will then
store its code coverage information into CBMEM, if possible.
Then, run "cbmem -CV" as root on the target system running the
instrumented coreboot binary. This will create a whole bunch of
.gcda files that contain coverage information. Tar them up, copy
them to your build system machine, and untar them. Then you can
use your favorite coverage utility (gcov, lcov, ...) to visualize
code coverage.
For a sneak peak of what will expect you, please take a look
at http://www.coreboot.org/~stepan/coreboot-coverage/
Change-Id: Ib287d8309878a1f5c4be770c38b1bc0bb3aa6ec7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2052
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Martin Roth <martin@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This tidies up the ARMV7 case when creating cbfs:
- Calculate the offset using the size of the master header and offsets
rather than using a magic constant.
- Re-order some assignments so things happen in a logical order.
Change-Id: Id9cdbc3389c8bb504fa99436c9771936cc4c1c23
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2125
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
... without the need for a coreboot table entry for each of them.
Change-Id: I2917710fb9d00c4533d81331a362bf0c40a30353
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2117
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
... and indent it to make output more comprehensible.
Change-Id: If321f3233b31be14b2723175b781e5dd60dd72b6
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2116
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
From index(3):
CONFORMING TO 4.3BSD; marked as LEGACY in POSIX.1-2001. POSIX.1-2008
removes the specifications of index() and rindex(), recommending
strchr(3) and strrchr(3) instead.
Change-Id: I3899b9ca9196dbbf2d147a38dacd7e742a3873fe
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/2112
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds an option to the cbmem utility to dump the cbmem console.
To keep the utility backwards compatible, specifying -c disables
printing of time stamps. To print both console and time stamps, run
the utility with -ct
Change-Id: Idd2dbf32c3c44f857c2f41e6c817c5ab13155d6f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2114
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
The first version of the cbmem utility was written in python,
but it had issues with 64bit systems and other little hick ups.
Since the C version has much fewer dependencies (no python needed
on target system), and it works in all corner cases, drop the
python version.
Change-Id: Ida3d6c9bb46f6d826f45538e4ceaa4fc1e771ff5
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2115
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
Most hton and noth functions are already available
through the system headers we include on OS X, causing
the compiler to warn about duplicate definitions.
Change-Id: Id81852dfc028cf0c48155048c54d431436889c0e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2106
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
The kernel on Ubuntu 12.04LTS does not allow to use
fseek/fread to read the coreboot table at the end of
memory but will instead abort cbmem with a "Bad Address"
error.
Whether that is a security feature (some variation of
CONFIG_STRICT_DEVMEM) or a kernel bug is not yet clear,
however using mmap works nicely.
Change-Id: I796b4cd2096fcdcc65c1361ba990cd467f13877e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2097
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The 'VERSION' in CBFS header file is confusing and may conflict when being used
in libpayload.
Change-Id: I24cce0cd73540e38d96f222df0a65414b16f6260
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2098
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This updates $CFLAGS used for armv7. Most of them were just added
to be consistent with what u-boot does. The important ones here
are -march=armv7-a and -mthumb (to allow 16-bit Thumb instructions).
I removed the hard float support because it got errors and
coreboot should never use floats anyway. We're still having trouble
with enums but I want to see how far it gets with this patch.
Also, put the flags in a form that makes diffs easier to read. It's
almost impossible otherwise.
Finally, move some flags to the architecture Makefile, and
rely on the fact that some are set for all architectures.
Depends-On: I6f730d017391f9ec4401cdfd34931c869df10a9e
Change-Id: Ia8a1ae22959933e06f7b996d1832cea40819f1ff
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2075
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The "offs" provided on the command-line was not taken into account
when creating an image for armv7...
Change-Id: I1781bd636f60c00581f3bd1d54506f0f50bb8ad0
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2092
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The tool could print much more useful information than
just time stamps, for example the cbmem console on systems
that don't have a kernel patched to support /sys/firmware/log.
Hence, add command line option parsing to make adding such
features easier in the future.
Change-Id: Ib2b2584970f8a4e4187da803fcc5a95469f23a6a
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2091
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
This fixes a minor bug that could cause testcc to fail unexpectedly.
Change-Id: Ib75d343104b6937682c05acf5232596aac83f105
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2068
Tested-by: build bot (Jenkins)
Otherwise cbfstool will segfault if you try to add an x86
payload to an ARM image.
Change-Id: Ie468005ce9325a4f17c4f206c59f48e39d9338df
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2028
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Various of the build scripts used upstream can't cope with
multilib library paths (eg. lib64), so move things to a place
where they can find them, if such paths are used.
Change-Id: I0dd9bba9a9eadd92d8704157e868fb37c715ee91
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2013
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This puts our installed binaries first in the search path, which is what we
really want.
... and remove some dead code
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: I91725af6b0fc486bd943d8e25cdce8d3e2503b3c
Reviewed-on: http://review.coreboot.org/1998
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The focus of the script is to create a supported cross toolchain,
and with GOLD and LTO being released features, we don't need this
anymore.
Change-Id: Ieb7752ce6e143d93414aba5887190f853cbd5a4b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1997
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
After patching them to be more flexible, an even better approach was found:
With this change libgcc isn't built at all on mingw32 platforms, so the
system headers aren't necessary anymore.
Now x86_64-pc-mingw32 builds, too.
Change-Id: Ic1406588669d87aee1bcf40ff67af77f2a6ac283
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Raymond Danks <ray.danks@se-eng.com>
If no valid cross compiler is found, the junit file produced
by abuild is invalid, missing the closing </testcase> tag.
This breaks proper reporting in Jenkins of our ARM board at
this moment.
Change-Id: I94bfc7f334d33ceeb53451a7c5125058c1f33bd4
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1992
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
With this change, i686-pc-mingw32 is acceptable, too.
Change-Id: I924f7ece84e77dc751e5e0318bac1ebc72d39d21
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1972
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After cherry-picking change 1679 it became apparent that there was a small
typo in my last xcompile change. With this patch applied, I can now compile
the first few files in the tree before GCC dies with
In file included from src/arch/armv7/lib/romstage_console.c:23:0:
src/include/uart.h:31:6: error: redundant redeclaration of 'uart_init' [-Werror=redundant-decls]
Now for some fun...
Change-Id: Idbb07f609e4a240238964cc16714639f5ef09914
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1970
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
The naming of architectures is highly inconsistent between
the different components of the toolchain. In binutils, the
file architecture is elf32-littlearch. In GCC it's armv7a-eabi.
This patch adds support for different BFD / GCC names
Change-Id: Ib644f71e8d8b4964adec73eed23921d3838e8aa7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1969
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Once again, the compiler we use on Mac OS X had trouble compiling GCC.
Switch to llvm-gcc because that one works with Xcode 4.5.2 and gcc 4.7.2.
Also drop the -W flags not known to Xcode from the iasl Makefile, and
drop the --remove-destination option from the copy, because that does not
exist on Darwin.
Change-Id: I9f978f65b5ae7edee2ecdcab337772e7a692bd9b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1967
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
!#%$@ autotools don't support all the platforms gcc and binutils
support. If you try to update to the latest autoconf, it will complain
that you have to use the older one. If I had a penny for every time
autotools broke portability...
Change-Id: I479b6c5f64f1def8dca889884e6a2b0e2ffc1fb8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1966
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
to match src/include/device
Change-Id: I5d0e5b4361c34881a3b81347aac48738cb5b9af0
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1960
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The output of cbfstool is a little inconsistent in some places.
This patch fixes it.
Change-Id: Ieb643cb769ebfa2a307bd286ae2c46f75ac5e1c1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1955
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is an initial re-factoring of CBFS code to enable multiple
architectures. To achieve a clean solution, an additional field
describing the architecture has to be added to the master header.
Hence we also increase the version number in the master header.
Change-Id: Icda681673221f8c27efbc46f16c2c5682b16a265
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/1944
Tested-by: build bot (Jenkins)
Other acpica's modules are not needed.
Change-Id: I16846caa922aded8db7c1d9e64c007fb2772ff98
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1935
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This provides weak empty declaration for mainboard_ops.
The struct chip_operations is not defined for __PRE_RAM__ so
the declaration is also moved upwards in the output.
Change-Id: I101f0b8b9f0a55fb51a7c6475d53cc588c84026d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/1931
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After collecting dependencies for ramstage, add an intermediate step
in which object files are linked per directory. The results are then
linked into the final binary.
This reduces the maximum command line length and might also help with
future use of LTO linking.
Also adapt the lint test for build dir handling, since printall
doesn't provide individual object files for ramstage anymore.
Change-Id: Ie40febd8c1eaf4609944eedeab46d870639e53df
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
sconfig creates empty defaults for all chip_ops, which can be overridden
by drivers simply by providing a concrete implementation.
Change-Id: Ib37515f0b0747bdbf4da780d28690a1e719944b2
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1567
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
That used to be the behaviour, and it's quite useful to incrementally
fix bugs across the tree.
Change-Id: I3e30cbdcf01631bc29f892054caa3babb0969beb
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
XGCCPATH is missing in new xcompile.
Change-Id: I177f54189be445404a4a61419064d3c414b8a30c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1921
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
With this change the the xcompile script now creates environment variables
for more than one architecture.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Change-Id: I349a1fd1d865ef16979f1dfd6aeca12b1ee2eed6
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/1915
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Update acpica to release 20121114 and
update patches/ to build with this version of acpica.
Correct the creation of crossgcc-build.log
Bump CROSSGCC_VERSION.
Change-Id: I269454ebc3c78b5852e4a67e55bb5642edad191d
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1861
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This is no GNU tool, so testing for "GNU" in the version string
is bound to fail.
We now accept everything that returns success on "flex --version"
and then hope for the best.
I tested both cases
Change-Id: If325f613fde1648847b998b7e8e5782d0f22b484
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1884
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix side-effects of name translation, treat original name as const.
Change-Id: Iae26be8cefe7db11eeb8e62fce6f3b8bc9c1f4ed
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/799
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
flex is needed by acpica. This patch makes the build fail early
instead of after gcc has been compiled, if flex is not there.
Change-Id: Idfd71bdf704ab25de655f1a72c266c5220b15048
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1860
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
- Adding more and more optional and non-optional parameters
bloated cbfstool and made the code hard to read with a lot
of parsing in the actual cbfs handling functions. This change
switches over to use getopt style options for everything but
command and cbfs file name.
- This allows us to simplify the coreboot Makefiles a bit
- Also, add guards to include files
- Fix some 80+ character lines
- Add more detailed error reporting
- Free memory we're allocating
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Ia9137942deb8d26bbb30068e6de72466afe9b0a7
Reviewed-on: http://review.coreboot.org/1800
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This removes almost all C++ code (except the wrapper)
Change-Id: I0f84070e3b6dc57c98d49a53150a140479b3221f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1799
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The appropriate compiler (provided by the build system) is used to
ensure proper toolchain options are used.
cbmem.c is being modified to suppress pointer to integer typecast
warnings.
Change-Id: Ibab2faacbd7bdfcf617ce9ea4296ebe7d7b64562
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1791
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Coreboot and u-boot create a table of timestamps which allows to see
the boot process performance. The util/cbmem/cbmem.py script allows to
access the table after ChromeOS boots up and display its contents on
the console. The problem is that shipping images do not include Python
interpreter, so there is no way to access the table on a production
machine.
This change introduces a utility which is a Linux app displaying the
timestamp table. Conceivably the output of this utility might be
included in one of the ChromeOS :/system sections, so it was attempted
to write this procedure 'fail safe', namely reporting errors and not
continuing processing if something goes wrong.
Including of coreboot/src .h files will allow to keep the firmware
timestamp implementation and this utility in sync in the future.
Test:
. build the utility (run 'make' while in chroot in util/cbmem)
. copy `cbmem' and 'cbmem.py' to the target
. run both utilities (limiting cbmem.py output to 25 lines or so)
. observe that the generated tables are identical (modulo rounding
up of int division, resulting in 1 ns discrepancies in some
cases)
localhost var # ./cbmem
18 entries total:
1:62,080
2:64,569 (2,489)
3:82,520 (17,951)
4:82,695 (174)
8:84,384 (1,688)
9:131,731 (47,347)
10:131,821 (89)
30:131,849 (27)
40:132,618 (769)
50:134,594 (1,975)
60:134,729 (134)
70:363,440 (228,710)
75:363,453 (13)
80:368,165 (4,711)
90:370,018 (1,852)
99:488,217 (118,199)
1000:491,324 (3,107)
1100:760,475 (269,150)
localhost var # ./cbmem.py | head -25
time base 4249800, total entries 18
1:62,080
2:64,569 (2,489)
3:82,520 (17,951)
4:82,695 (174)
8:84,384 (1,688)
9:131,731 (47,347)
10:131,821 (89)
30:131,849 (27)
40:132,618 (769)
50:134,594 (1,975)
60:134,729 (134)
70:363,440 (228,710)
75:363,453 (13)
80:368,165 (4,711)
90:370,018 (1,852)
99:488,217 (118,199)
1000:491,324 (3,107)
1100:760,475 (269,150)
Change-Id: I013e594d4afe323106d88e7938dd40b17760621c
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Example:
cbfstool image-link.bin add-flat-binary u-boot.bin fallback/payload \
0x100000 0x100020
will add u-boot.bin as fallback/payload with a load address of 0x100000
and an entry-point of 0x10002.
Change-Id: I6cd04a65eee9f66162f822e168b0e96dbf75a2a7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1792
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
ifdtool will now dump access permissions of system comonents to
certain IFD sections:
Found Master Section
FLMSTR1: 0xffff0000 (Host CPU/BIOS)
Platform Data Region Write Access: enabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: enabled
Flash Descriptor Write Access: enabled
Platform Data Region Read Access: enabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: enabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR2: 0x0c0d0000 (Intel ME)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR3: 0x08080118 (GbE)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: disabled
Requester ID: 0x0118
Also, ifdtool -u /path/to/image will unlock the host's
access to the firmware descriptor and ME region.
ifdtool -l /path/to/image will lock down the host's
access to the firmware descriptor and ME region.
Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1755
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
If a section is bigger than the FD file it is injected into, and the FD
lies about the size of the FD file, ifdtool would crash because reading
in the section writes beyound the FD file in memory.
Change-Id: Idcfac2b1e2b5907fad34799e44a8abfd89190fcc
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1754
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Detailed timing descriptor (DTD) is an 18 byte array describing video
mode (screen resolution, display properties, etc.) in Intel Option
ROM. Option ROM can support multiple video modes, specific mode is
picked by the BIOS through the appropriate Option ROM callback
function.
The new utility allows to interpret the 18 byte hex DTD dump, and/or
modify certain values, and generate a new DTD.
To parse the DTD contents just pass the 18 bytes to the utility in the
command line. To modify the existing contents and generate a new dump
precede the 18 bytes with '-m' and follow prompts.
Change-Id: Ib00bdaf42c350b98b5a48d08e6bb347b5ec25a8b
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1711
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is a cosmetic change which formats timestamp information
retrieved by cbmem.py.
Instead of printing timestamps in a single line, print them one per
line and add time (in us) elapsed since the previous timestamp.
time base 4149594, total entries 18
1:56,928
2:58,851 (1,923)
3:175,230 (116,378)
4:175,340 (109)
8:177,199 (1,859)
9:214,368 (37,168)
10:214,450 (81)
30:214,462 (11)
40:215,205 (743)
50:217,180 (1,974)
60:217,312 (132)
70:436,984 (219,671)
75:436,993 (8)
80:441,424 (4,431)
90:442,487 (1,062)
99:553,777 (111,289)
1000:556,513 (2,736)
1100:824,621 (268,107)
Change-Id: I0d25cafe766c10377017697e6b206276e1a92992
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1716
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
For some reason which I fail to understand, specifying endiannes using
'@' (which means 'native' and should be the same as '<' on x86
platforms) causes cbmem.py to crash the machine on 64 bit systems.
What happens is that the addresses read from various table headers'
struct representations do not make sense, when bogus address gets
passed to get_phys_mem, the crash happens while that function is
executed.
dlaurie@ found out that replacing "@" with "<" in fact fixes the
issue. After some investigation I am just submitting this fix without
much understanding of the root cause.
Change-Id: Iaba9bc72a3f6b1d0407a5f1e3b459ccf5063969d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/1715
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
CBFS allows coreboot rom images that are only partially covered
by the filesystem itself. The intention of this feature was to
allow EC / ME / IMC firmware to be inserted easily at the beginning
of the image. However, this was never implemented in cbfstool.
This patch implements an additional parameter for cbfstool.
If you call cbfstool like this:
cbfstool coreboot.rom create 8192K bootblock.bin 64 0x700000
it will now create an 8M image with CBFS covering the last 1M of
that image.
Test:
cbfstool coreboot.rom create 8192K bootblock.bin 64 0x700000
creates an 8M image that is 7M of 0xff and 1M of CBFS.
Change-Id: I5c016b4bf32433f160b43f4df2dd768276f4c70b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1708
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
cbfstool was not looking at any dependencies when building
by running make in util/cbfstool. By fixing this it's not
required to make clean every time you edit a file in there.
Change-Id: I544fd54d4b9dd3b277996c21ade56dc086b84800
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1707
Reviewed-by: Marc Jones <marcj303@gmail.com>
Tested-by: build bot (Jenkins)
Compose the name from Kconfig strings instead.
As the field is for debug print use only, a minor change in the output
should do no harm. The strings no longer include word "Mainboard".
Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/1635
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't let expat and/or python show the compile process on stdout.
Instead direct this output to crossgcc-build.log.
Fix the logfile path for python.
Change-Id: I431dabf6955d7eef3e54c96d0fb11b92d1cee96d
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1667
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I7cd63248eb8abb711cecce41e3f8a282b34aa126
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1548
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Update crossgcc to use gcc 4.7.2.
This requires a minor change to util/crossgcc/buildgcc as well.
Tested on hardware with asus/p2b and lenovo/x60.
Change-Id: Ia3921844670ca99741e5715def14dd969f305ab7
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1609
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Compilation of acpica-20120420 is broken (and old, but I'll take care
of that in a future patch),
let's fix that ("Building IASL 20120420 ... failed").
Change-Id: If5fd5cd93d748f78b7c059323f9f810666e32cc7
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/1607
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
regex, pdcurses, wsock(for itohl) are seperated libraries. mmap and unmmap are
ported from git.
Issues:
1. The length of command line is limited. That makes the Thather can not be built
because too many obj.o need to be built.
Change-Id: I1d60ec5c7720c1e712e246c4cd12e4b718fed05f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The default gcc on mingw will process the __attribute__ ((packed)) in
a different way other than non-win system.
Change-Id: Iac9f4476c922472d0b447f1c3ef60e8e13bd902f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1603
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Use the verbatim variable method to define and export test code and
the actual libpci test from flashrom. This improves readability and
will work with stricter compiler (settings).
Change-Id: Iace7d53b0b992c4fde596ce1d606ad715d6dfc2a
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1575
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Separate host bridges/DRAM controllers from LPC controllers in supported_chips_list[].
- Refine some names and macros.
- Clean up some whitespace errors.
- Add IDs and names of 5, 6 and 7 Series southbridges and the three
latest Core CPU families with integrated memory controllers but do
not implement any pretty printing routines for them yet.
The first generation Core family is already supported, although it
was wrongly named after the PCH and used the wrong ID. Also, the BAR
values have been mangled to 32b instead of 64b. Both errors have been
fixed and most basic support for the other two generations was added.
Change-Id: Ief81e57f7c065cafac52e48b6364b57c72fcdf95
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1574
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
&> is a bashism to redirect both outward streams (stdout and stderr), but
with other shells this introduces a race condition with the rm command
after it, because the compiler execution is done in the background/
in parallel. Found and tested with dash.
Change-Id: I08516494828c9f7af168f954f2df027372657867
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1573
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
For BSD, patch and tar are not default GNU. Add a work around
to let the non-gun patch and tar work.
Change-Id: I0a9d0bb0e535aa5e0dde146db330c3c8d7b4d8cb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1502
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Forcing this rule, chip_ops can be added in the static devicetree
regardless of the existence of the chip.h files.
Change-Id: Iec1c23484e85cab3f80a34f2b082088f38ac4de9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1472
Tested-by: build bot (Jenkins)
The classes in $(top)/Makefile uses $(abspath) to get the path.
The $(abspath) can not resolve symlink. If the coreboot is located
in a symlink directory, the run_printall produces the absolute
path while the $PWD just produces the path with symlink. Use
`pwd -P` to get the abs path.
Change-Id: Icf6b364d030c14a9c78991767b17dafc701baf3c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1551
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After make 3.81 is copied to /usr/local/bin, the old make 3.80, which
doesn't work for coreboot, will replace $MAKE with gnumake. That is not
we want.
Change-Id: I87fbe95c70228a22f2c233ff071df29639b63726
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1550
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Makefile still used SVNDEF on FreeBSD.
Change-Id: I45c7fbc66c33e82a2146ef7df87b63bc7edea4cd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1554
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
see the Netbsd manual:
http://netbsd.gw.com/cgi-bin/man-cgi?uname++NetBSD-current
Error output needs to be redirected.
Change-Id: I1853a0162e14be0ee9d7971466499af6c72b2427
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1545
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The Makefile.inc is integraged into coreboot Makefile. It doesn't
need to access to HW like cmos. It doesn't include cmos-hw-unix.c,
which is only for individual tools running seperatedly.
Change-Id: Ib00b5c3da63acb4120cb23eb7d661c5bc75d7c86
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1544
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Change-Id: I86cecf6aee1fcb682cb32bd0f03e014fd1afe594
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1549
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
With this chance it becomes practical to have payload.sh build/update
the payload, and abort abuild if something bad happened.
Change-Id: Iee25de2e8b62153c477b8e5d32e097b59797523c
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1536
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Only relevant on windows (and nvramtool currently fails there), but
it doesn't hurt.
Change-Id: I5d6420c1f9dc49cf3af31e75088e51a90f729e01
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1535
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Change-Id: I6a7852eef32a3440c9d29e45420cb21d2db8c404
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1528
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Sometimes we like to make grep auto-highlight the match text by
setting the GREP_OPTIONS. This will make the compare_output
in lint-002 catch the difference between 2 strings which text are
same but color are different. Override the GREP_OPTIONS.
Change-Id: Ia257214fe5149e084e8eac3fb551a494eaa46ae6
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1526
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This reverts commit 645f2dd5d9.
Instead of adding a special case to nvramtool to avoid it
picking up Kconfig's regex.h, have the host compiler only
consider util/kconfig for includes (ie. -Iutil/kconfig)
for kconfig related object files.
Change-Id: Ie4f97ce38cb3e911f6e6c1e5b6f86f6998d93f69
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1509
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
The ramstage location has been changed. Reflect this in the script.
Change-Id: I76c9b38a8ffe2188e94146e845d23536625c0979
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/1504
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Set HOSTCFLAGS as nil to make the nvramtool include the regex.h
in system. Otherwise it will include the regex.h in kconfig, which
will cause building error in FreeBSD.
Change-Id: I95292e23e1716da1260842be9597119a4e26c8ed
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1500
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Tested-by: build bot (Jenkins)
Some older gcc requires the default entry in switch, otherwise
build warning "enumeration value not handled in switch" will come
up.
Change-Id: Ic8ea9960e4aca599e0ea62ec345122c9df57e766
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1501
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf
The code was done by Juha Tuomala <Juha.Tuomala@iki.fi> but he refused
to sign it off, or commit it for review. I'll commit it anyway with my sign-off
because it does not exceed threshold of originality for any copyright.
Change-Id: Id86267f5add539b99229f20bbe339bfb5eb20f8b
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1496
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
libgen.h dont have to be included.
Change-Id: I46a6a23a310b20784de956a577f1ab3c7931e34d
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1470
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The name is derived directly from the device path.
Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/1471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Dropping mainboard's chip.h broke execution of the mainboard's enable
function and the addition of mainboard specific smbios tables.
The former was fixed by Kyosti in http://review.coreboot.org/1374
This patch fixes the breakage in static.c and also backs out a small
portion of Kyosti's patch (because it's not needed anymore)
Change-Id: I6fdea9cbb8c6041663bd36f68f1cae4b435c1f9b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1421
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
We thought about two ways to do this change. The way we decided to try
was to
1. drop all ops from devices in romstage
2. constify all devices in romstage (make them read-only) so we can
compile static.c into romstage
3. the device tree "devices" can be used to read configuration from
the device tree (and nothing else, really)
4. the device tree devices are accessed through struct device * in
romstage only. device_t stays the typedef to int in romstage
5. Use the same static.c file in ramstage and romstage
We declare structs as follows:
ROMSTAGE_CONST struct bus dev_root_links[];
ROMSTAGE_CONST is const in romstage and empty in ramstage; This
forces all of the device tree into the text area.
So a struct looks like this:
static ROMSTAGE_CONST struct device _dev21 = {
#ifndef __PRE_RAM__
.ops = 0,
#endif
.bus = &_dev7_links[0],
.path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}},
.enabled = 0,
.on_mainboard = 1,
.subsystem_vendor = 0x1ae0,
.subsystem_device = 0xc000,
.link_list = NULL,
.sibling = &_dev22,
#ifndef __PRE_RAM__
.chip_ops = &southbridge_intel_bd82x6x_ops,
#endif
.chip_info = &southbridge_intel_bd82x6x_info_10,
.next=&_dev22
};
Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727
Signed-off-by: Ronald G. Minnich <rminnich@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1398
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
mainboard_config never worked right, at least not since we've had sconfig.
Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that
tried to use it anyways.
Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1359
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The "Error while writing." error messages did not output a new line
which made the output look weird. With this patch, it should look like
this:
$ ifdtool -x 3rdparty/mainboard/google/parrot/descriptor.bin
File 3rdparty/mainboard/google/parrot/descriptor.bin is 4096 bytes
Found Flash Descriptor signature at 0x00000010
Flash Region 0 (Flash Descriptor): 00000000 - 00000fff
Flash Region 1 (BIOS): 00200000 - 007fffff
Error while writing: Bad address
Flash Region 2 (Intel ME): 00001000 - 001fffff
Error while writing: Bad address
Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)
Change-Id: I784ff72d0673f167dbf0bd10921406abd685ce72
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1299
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Almost all probe functions called cpuid(). Those calls are replaced
by a single cpuid() call in main() and a new parameter to the target
probe functions with the cpuid() result.
The vendor_t and struct cpuid_t definitions are moved closer to the
top of msrtool.h and the vendor_t enum is reformatted to simplify
addition of further values.
Change-Id: Icd615636207499cfa46b8b99bf819ef8ca2d97c0
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/1259
Tested-by: build bot (Jenkins)
Added few MCH and DMI registers for H65E.
Description of them can be found at
"2nd Generation Intel Core Processors
Family datasheet"
Change-Id: If4fee35bb5a09b04ea0684be9cbd3c1e9084b934
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1258
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
eliminate printf format warning.
Change-Id: I51f75a259d28c5de788f57c3d720b76ca638e330
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1248
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Use the right data types to fix compiler warnings.
Change-Id: Id23739421ba9e4a35599355fac9a17300ae4bda9
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/1236
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
To complement commit e1bb49e (Add a "remove" command to cbfstool) and
fix a compiler warning provide a prototype for remove_file_from_cbfs.
Change-Id: Ied8eac956de5fed3f9d82ce1e911ee1fec52db15
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/1235
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Accessing the memory of a char array through a uint32_t pointer breaks
strict-aliasing rules as it dereferences memory with lower alignment
requirements than the type of the pointer requires. It's no problem on
x86 as the architecture is able to handle unaligned memory access but
other architectures are not.
Fix this by doing the test the other way around -- accessing the first
byte of a uint32_t variable though a uint8_t pointer.
Change-Id: Id340b406597014232741c98a4fd0b7c159f164c2
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/1234
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The lex compile wasn't current (or something) and so INTA wasn't lexed
properly.
Change-Id: I5a760430788792f54c4e1e0d419b8dd525079d15
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1226
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This register is helpful for porting new mainboards based on
cs5536 southbridge.
Change-Id: Iff3adc2c2fbc672c8541096756f95b3322f6ab19
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: http://review.coreboot.org/1211
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This patch adds support for autogenerating the MPTABLE from
devicetree.cb. This is done by a write_smp_table() declared
weak in mpspec.c. If the mainboard doesn't provide it's own
function, this generic implementation is called.
Syntax in devicetree.cb:
ioapic_irq <APICID> <INTA|INTB|INTC|INTD> <INTPIN>
The ioapic_irq directive can be used in pci and pci_domain
devices. If there's no directive, the autogen code traverses
the tree back to the pci_domain and stops at the first device
which such a directive, and use that information to generate the
entry according to PCI IRQ routing rules.
Change-Id: I4df5b198e8430f939d477c14c798414e398a2027
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1138
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Add support to dump all data registers for Nuvoton chips (NCT6775F, NCT6776F,
and NCT6779D). Register contents will be dumped if the -e option is provided on
the command line.
Change-Id: I2b425b48c1f28a10ff3c1ca1d7f21c501eff74ad
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1150
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Add new function dump_data() to dump a bank of superio data registers.
Change-Id: I13a58d87c14d319cfcdea1ec1d54c2b110d90f9f
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1149
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Remove superfluous pkg* definitions and installation of a target
directory directory that is never used.
Change-Id: I2addf3f316230cdd428def5889fd3beb7c40f422
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Reviewed-on: http://review.coreboot.org/1195
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The superiotool Makefile extracts a version string from SVN. This does not work
with a git repository, and results in an empty version string. Use the output of
'git describe' as version string instead.
Change-Id: Idf92c02753b28ef5bcdd3b6df4a08d79ae974434
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1151
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
commit 57cd1dd296 added this attribute,
but with wrong length, so it actually never matched.
Change-Id: Ibcc7816b5fa895faa66710cc29de38f129be6a2b
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1133
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Mathias Krause <minipli@googlemail.com>
This makes it easier to use the same code on romcc and gcc.
Specifying attribute((unused)) on romcc does nothing.
Change-Id: If9a6900cad12900e499c4b8c91586511eb801987
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1132
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
and increase the busses size to 32, as 16 isn't enough one some
systems (i5000 for example)
Change-Id: Ie09f451dd82ac25b0de85fd47807136e01da737b
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1114
Tested-by: build bot (Jenkins)
make it more readable by adding INT defines and a left shift.
Change-Id: I7db4d8c71ab4d705833019aa4cc2f11cef7d4fee
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1113
Tested-by: build bot (Jenkins)
Print IOAPIC entry based on actual data, instead of giving the user
the feeling that the generated ioapic entry has any relation to reality.
If the IOAPIC entry in the MPTABLE is incorrect, the user will notice
it anyways. But adding a static entry (which might be also incorrect)
is even worse.
Change-Id: I6d0012324a9e6c7d22436ada36cbd3a4f7166f5c
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1108
Tested-by: build bot (Jenkins)
It was renamed in coreboot, so have mptable generate correct code.
Change-Id: I9579209f9f47b756d8ccab63b6f942d22d53d79d
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/1107
Tested-by: build bot (Jenkins)
* -c "" need never be tested if getopt params are handled; fail abuild script when getopt parsing fails
* use expr to resolve numeric test fails with -c max
* cpus variable may be being passed in the environment. Don't overwrite MAKEFLAGS if it is not.
Change-Id: I96236ef719a1a9f942b8e15bfcf015d60068e58a
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Reviewed-on: http://review.coreboot.org/1068
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
clang complained about a missing include and wrong fprintf use.
Change-Id: Idc023b653e694147c624d5f8f9ed3b797c462e9f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1067
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In printf/printk, using %lld or %ld for uint64_t will warn on either
64bit or 32bit machines. However, C99 defines PRIx64 / PRId64 to
provide the right modifiers for printing uint64_t variables. Use them
instead.
Change-Id: I68df5d069a1e99d1a75885173ddfd7815197afea
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1053
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
To avoid having two copies for every firmware descriptor (one for
EM100 use and one for real SPI flash use), add an EM100 mode to
ifdtool that allows to "dumb down" a fast image to the settings
required for the EM100 to work.
Change-Id: I0ed989f0a49316bc63d8627cb5d4bd988ae7a103
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1039
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The ChromeOS build system provides a set of CXXFLAGS, however those do
not contain -DCOMPACT. This breaks the compilation of cbfstool in
coreboot-utils.
This fix overrides CXXFLAGS so that coreboot-utils compiles again.
Change-Id: If9495bdd815fe2cdaeba5386afa953558742467b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1038
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
It still failed because make touches files it isn't
supposed to touch.
Change-Id: I5a6ceaa9d5da212c1e34b121cf39fa9d27964747
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1037
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Happened way too often that crossgcc failed
because m4 or bison wasn't installed already.
Change-Id: Ibcca2183edd5db20608015e3898f8fff9a6d11e8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1026
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Update GNU project versions, download GNU project tarballs
using ftpmirror.gnu.org (http, picking close servers).
Update ACPICA tarballs, ignore https certificates for all
downloads. Not very useful, but breaks ACPICA download.
Change-Id: I4aa8b08836346d031793a006b20b741d86e48988
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1025
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Raymond Danks <ray.danks@se-eng.com>
Handling user options was spread out across the code.
Collect as much as possible in the getopt loop.
Change-Id: I4979a14988da000c008e155023b960535b529b41
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1028
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
abuild used to allow boards to override certain environment
variables using a file called abuild.info.
This isn't used, this isn't needed. Drop it.
Change-Id: Ic93748f602bf0c354ff1f3be25a050e1cb469256
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1027
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Determine if xargs -P works. If yes, use that to build multiple
boards in parallel, instead of relying on make -j X, when doing
a full abuild run (instead of single boards).
make -j X isn't able to make use of several cores at various
serialization points in our build process, so this change results
in a >25% speed up for a full abuild run in my tests.
Change-Id: Id484a4211c84a3a24115278e0fbe92345f346596
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/409
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is the beginning of a tool that transforms the i9x5 code to user
mode code. Consider this a very early stage although it does produce
two programs. Requires spatch 1.0 or greater.
To try it out, assuming you have an up-to-date spatch,
sh transform
make
make broken
Please don't fall to the temptation to auto-magicize this process.
It's primitive for a reason. That said, suggestions welcome of course.
Change-Id: I0188e36637b198b06c17f6d3c714d990e88bd57d
Signed-off-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-on: http://review.coreboot.org/1003
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When bringing in nvramtool as build_opt_tbl replacement,
various platforms where left in the cold that don't
provide direct IO support from userland (or at least not
in a way we support).
Build nvramtool without CMOS support when done as part of
a coreboot build. We don't need to touch CMOS in this case.
Change-Id: Icc88d1d32f10384867a5d44b065f9aa119bb0d50
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/983
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
The stable lint test "build-dir-handling" ran the build system
in a way that made it download the blobs repository. Since this
is part of the pre-commit hook, this might have kicked in with
users desiring not to have them.
Change-Id: I44a00137352c5966ff7fe2a030673276f6803908
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/999
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
abuild -B enables the use of the blob repository.
Change-Id: I2dd823d3b024ad249d72d668657bf6a6e92145cf
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/958
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
To build under Cygwin, nvramtool depends upon the package ioperm:
http://openwince.sourceforge.net/ioperm/
for sys/io.h and sys/perm.h. This change causes the nvramtool make to correctly include and link against these headers and libraries.
Change-Id: If6cd9d324de7bc19830e0018844f42761b28ddd3
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Reviewed-on: http://review.coreboot.org/940
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
To build under Cygwin, ectool depends upon the package ioperm:
http://openwince.sourceforge.net/ioperm/
for sys/io.h and sys/perm.h. This change causes the ectool make to correctly include and link against these headers and libraries.
Change-Id: I7d54ab5110c2bb1fd21dfa48d56031f3f29cd54e
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Reviewed-on: http://review.coreboot.org/941
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
It's gone from the build. Drop the code as well.
Change-Id: Ice6fcb39565273360a576bda4826f16088f4666c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/914
Tested-by: build bot (Jenkins)
Reviewed-by: Vikram Narayanan <vikram186@gmail.com>
As cmos.layout parsing capabilities are already there in nvramtool,
use those than using build_opt_tbl.c. Add binary and header file
generation in nvramtool. Make appropriate changes to Makefile.inc.
Change-Id: Iaf3f5d4f51451aeb33c92800a0c895045f2388cf
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/898
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Don't test executable files nor object files, even if the former might
render the test useless on win32 (executable bit isn't well defined there).
Change-Id: Ifb6fc83243289d266f439316c14b6b009f8da5fc
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
While at it, also make the array static - no need to export this symbol.
Change-Id: I7fdcda2b80150b6f32b5bc3e0957998a4fd43fce
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/892
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Fixed "warning: format not a string literal and no format arguments"
Change-Id: If752a37f268c90f782c6e831e5477ea804e48026
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/878
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On windows, we sometimes require getopt executables, which end up
in the source tree. These shouldn't break the whitespace test.
Change-Id: Iaf86e38b94605bebb69a317e00f932eefcf468b9
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/863
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Similar to buildgcc, abuild requires getopt(1). Provide an
implementation for platforms without it (Win32)
Change-Id: I2ae4d84e06dd34135c97b18819da2b49a89706ce
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/862
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This way we can depend on it during build.
Change-Id: I7e773c6a029e376e3d70d0a8c9e96ffe0c2cf82e
Signed-off-by: Patrick Georgi <Patrick.Georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/845
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change partially addresses the problem with attempting to
generate coreboot image out of tree. The configuration step fails when
in cheroot, if the destination directory is placed in /tmp.
The problem is that the mconf package tries renaming the temporary
file created in the local directory into the destination config file.
If the destination root and the local directory are located on
different file systems, the rename operation fails.
The proper fix (still upcoming) would be to identify all places where
mconf creates temp files, and make sure that all temp files get
created in the destination tree.
This change modifies just one location, which prevents building out of
tree in the most common case.
Test:
run the following in the coreboot directory in chroot:
(coreboot) cp config.lumpy .config
(coreboot) /bin/rm -rf /tmp/cb
(coreboot) CROSS_COMPILE=i686-pc-linux-gnu- make obj=/tmp/cb oldconfig
(coreboot) CROSS_COMPILE=i686-pc-linux-gnu- make obj=/tmp/cb
Observe the build succeed (it was failing during the config phase
before this change)
Change-Id: If4506e984b8afc192a1689c7b0aa956dd35f66c6
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/815
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This command removes the first file it finds with the given name by changing
its type to CBFS_COMPONENT_NULL and setting the first character of its name to
a null terminator. If the "files" immediately before or after the target file
are already marked as empty, they're all merged together into one large file.
Change-Id: Idc6b2a4c355c3f039c2ccae81866e3ed6035539b
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: http://review.coreboot.org/814
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This adds detection of x86_64 gcc toolchain (which buildgcc can build
if provided the option).
Change-Id: I8b12f3e705157741279c7347f4847fb50ccc2b0e
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/673
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Tested-by: build bot (Jenkins)
... and remove some dead code.
Change-Id: Id959bdf57af09db2a1f5742555c2dcabca38ac9a
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/818
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
- Fix some poor programming practice (breaks of strict aliasing as well
as not checking the return value of read)
- Use PRIx64 instead of %llx to prevent compilation warnings with both
32bit and 64bit compilers
- Use same compiler command options when linking inteltool and when
detecting libpci for inteltool
Change-Id: I08b2e8d1bbc908f6b1f26d25cb3a4b03d818e124
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/752
Tested-by: build bot (Jenkins)
Reviewed-by: Mathias Krause <minipli@googlemail.com>
idftool was failing to add the ME blobs into the output image in case
the blob size does not exactly match the size allocated for it in the
flashrom structure.
It is difficult to set the field in the structure to exactly match the
size (for some reason Intel flash tool fails to insert the correct
size even when given the exact ME blob). On the other hand there is no
harm in using am ME blob smaller than the allocated size, this change
modifies the tool building the image to allow for smaller components.
Change-Id: I1b04f90051b91157391943c9bad0eb06dd297431
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/751
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change makes significant changes to cbmem.py to make it use the
coreboot tables to find the memory console and timestamp areas instead
of looking for the in memory table TOC structure. That appears to be
more robust and gets cbmem.py working again after some unrelated
changes that affected memory layout.
It also introduces some small infrastructure to make accessing C style
structures in physical memory easier and more transparent.
Change-Id: I51833055a50c2d76423520ba6e059bf8fc50adea
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/762
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is a python script which is supposed to run on a target
which is controlled by coreboot. The script examines top of
memory looking for the CBMEM signature at addresses aligned at
128K boundary. Once the script finds the CBMEM, it iterates
through the CBMEM table of contents and parses two entries: the
timestamps and the console log.
This submission is just a template to build upon to create a
utility for displaying CBMEM information while running Linux on
the target.
BUG=chrome-os-partner:4200
TEST=manual
See test description of d81e6b8c8d41f2d6 for test procedure.
Change-Id: Id863a8598eaadc2d20d728f9186843e65cbe6f37
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://gerrit-int.chromium.org/5942
Tested-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/723
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There was some corner case where commit-msg failed. Update to
latest upstream version.
Change-Id: I822d6c3f64728de7356401465e00575ac5af8196
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/798
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
no dumping yet
Change-Id: I4e687ca816c8d6d1c95255b0abf6a19513e23f86
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/734
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
- wc adds a number of leading spaces which broke cut
- sed can't replace spaces with new lines, so use tr for that.
- make sure directories are created if they're not there.
Change-Id: Ia0db059683abe3d97b0ab6feaece660a1f4e5079
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/774
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Also mark the corresponding lint test stable.
Change-Id: Ib7c9ed88c5254bf56e68c01cdbd5ab91cd7bfc2f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some attempt at enforcing style
Change-Id: Ibbfb86402ecc57e8db6c3857c8e0193085ed4fc2
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/771
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In bios_log, find that the first segment of the payload is shown
as code rather than data.
Sample:
Got a payload
Loading segment from rom address 0xfff29378
code (compression=1)
...
Change-Id: I82eaad23f08c02f4ed75744affa8835255cf5c17
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/767
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The offending part that made coreboot crash with some toolchains
was that gcc emits SSE instructions but coreboot did not enable SSE at
that point.
Since the gain for coreboot using SSE instructions is not measurable,
let's not use SSE instructions rather than enabling SSE early on.
One rationale behind this is that other parts of coreboot, like the
SMM handler would need fixing because the XMM registers are not saved
on SMM entry. Thus keep it simple.
Change-Id: I14f0942f300085767ece44cec570fb15c761e88d
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/694
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When configuring the tree with "make gitconfig", a pre-commit hook
is installed that runs the stable lint tests.
If any of these fail, the log is visible (on stdout) and the
commit is aborted.
Change-Id: Ie2a26e87f466c63b24db8dca8827057a18ac7f3e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/682
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have tests that pass (and should be enforced soonish) and those
that don't pass yet (and thus shouldn't break the build).
The plan is simple: As soon as a test passes, it's marked stable so
things remain that way.
"make lint" runs all tests,
"make lint-stable" runs only those that shouldn't fail.
Change-Id: Iaa85d71141606d9756e29b37c7a34c2a15e573ac
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/681
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
config files are rename()d, which fails across filesystem borders.
So force temporary config files in current directory.
Change-Id: I583c2ab9a822a6f99f838778aa17ffd2d47eaed1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/680
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We used to support marking boards broken. We don't need that anymore.
Change-Id: I9d21fdf22c9a8e0e69488fc7896f2a81bf629201
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/675
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix issues reported by new lint test.
Change-Id: I077a829cb4a855cbb3b71b6eb5c66b2068be6def
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/646
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
So far it tests for trailing whitespace.
"Upstream" files (bison/flex's .?_shipped, kconfig, vendorcode) are ignored.
Change-Id: I7af1954d537fd05f06cd210ac130dac87892159b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/645
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When the romstage.bin becomes bigger than the size of XIP, the
cbfstool can not allocate the romstage in the CBFS. But it doesn't
report an error. It will take quite a while to find out the root
cause.
Change-Id: I5be2a46a8b57934f14c5a0d4596f3bec4251e0aa
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/650
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
don't remove calls to `flatten()' and `correct_coalesce_conflicts()',
since they (probably) have side effects.
Change-Id: I78fc4163b3f5f1f5f3c5153f9559c22e11e8344d
Signed-off-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-on: http://review.coreboot.org/605
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To simplify installation on mingw a bit (even though git remains a pain),
drop the perl dependency the commit-msg hook introduced to the coreboot
development environment.
It's replaced by awk which we use elsewhere already (and is a more lightweight
utility in any case)
Change-Id: I67adfe1ec43c898735d4bae4819ceb53e83c303b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/78
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Mainboard and chip Kconfig files have several build options that
are redundant with information in devicetree.cb. This patch enables
sconfig to auto-generate equivalent configuration.
sconfig -s
Generates mainboard's static.c file, as before.
sconfig -b
This operation creates mainboard's bootblock init code. By default,
for every chip listed in mainboard/devicetree.cb, if there is a
chip/bootblock.c file, the init function is called.
A mainboard/bootblock.c file can be added to override default
behaviour.
sconfig -k
This operation generates select -options for component paths.
Change-Id: I808d44af552dbc5e0565d6a0f4f72c7be9f5740e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Linking fails when using -Wl,--as-needed and/or esp. when forcing --as-needed
through a compiler specs file.
A proper compile/link command would look like: $(CC) $(CFLAGS) $(LDFLAGS) -o foo
$(OBJS) $(LIBS). So the *FLAGS must be passed *before* the objects while the
libraries/dependencies must be passed *after* the objects.
For more details see: http://www.gentoo.org/proj/en/qa/asneeded.xml
Change-Id: I5a5b05e1cab8a2d88ce56c92d9b2f991ca1ee6c0
Signed-off-by: Christian Ruppert <idl0r@qasl.de>
Reviewed-on: http://review.coreboot.org/494
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Collecting per-board abuild.xml is bound to fail if there
are no such files.
Change-Id: I6bd6b4389beda51654005e0380f0e52f006642db
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/422
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This should fix issues with the iasl Makefile on Debian and
prepares ccache support for buildgcc.
Change-Id: Id9e6b2044b159b19bf013ec5c47b60ca1c2f2991
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/399
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
kconfig creates reasonably safe filenames for its temporary files
except for two of them.
Change-Id: I6861f55ae2a5311e3fb7919333ce9af1e39ce78b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/408
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Write them per-board and merge them after everything is done.
This prepares for build parallelization.
Change-Id: Ia4e7ce03473bcf8861fb9ae06e9c1270292401ac
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/407
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use MAKEFLAGS to propagate the parallelization configuration to
the build
Change-Id: If90ed446edd8e6dc679d284ee9db7a24269edd36
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/406
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
By moving the just-created file away, parallel runs of abuild might break.
Change-Id: I03368f00e9b11dad4c80d41279970e28debc7ed5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/405
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
buildgcc moved from building gdb by default (with opt-out) to
gdb being optional. Adapt Makefile so it works again
Change-Id: I663a8c70db4f7b5d07456fb67a223dbb2de2c133
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/417
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current code exits config mode of the NCT6776F immediately after
detection, so the register dump shows all 0xffs. This patch adds code to
re-enter config mode for the register dump so that the register contents
can be read.
Change-Id: I4ad0c108b6411a665e31f55dea4b91ca77d1a5f7
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/391
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
In addition:
- drop some unneeded patches
- make the scripting support depend on SKIPPYTHON not SKIPGDB
so it is possible to build GDB with and without scripting support
- rename the repository checkout version of GCC trunk, not X+1
so we don't have to change it on every version upgrade.
Change-Id: I1b7d5b8921187c1c1d39b04f20bb715ddba72fe8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/367
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This allows GDB to run Python scripts. The Python build is dependant on the GDB
build flag.
Changes by Stefan Reinauer:
- update to latest buildgcc script
- disable GDB per default
- disable python scripting, if GDB is not enabled
- bump version number to 1.06
Change-Id: Ie7fc8706deec41c804870415d3c79d225c98cd31
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/153
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The previous fix broke buildgcc colors on MacOS X.
This uses an encoding that should be more universal.
Change-Id: I31ac6090ffb7c04784cf6566823652f229aebbb5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/361
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Ubuntu (and probably other distros) have dash as /bin/sh, which
doesn't display colors by itself. If /usr/bin/printf is found, it's
used instead of the internal printf to re-enable colors.
Change-Id: I3e6d413cd0c8a46ef91821d8c07e88166de58af4
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/352
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Tested on Mac OS X 10.7.1
- Tested on Ubuntu 10.04 LTS (Lucid Lynx)
- Tested on Ubuntu 11.10 (Oneiric Ocelot)
Please test on Windows and other Linux distributions
Change-Id: I132c01293fc0cff0cfb84556a93c0b8de8e57230
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/250
Tested-by: build bot (Jenkins)
Reviewed-by: Sven Schnelle <svens@stackframe.org>
This patch adds support to dump SIO like interface of AMD Embedded Controller
in the SB7xx and SB8xxx southbridges. Parts of the register interface are
documented in SBxxx RRG BDG.
Change-Id: Ib2ccaa3dfe33cfa8e7cba19d8ab0798286ad2f92
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/343
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
If -Werror is not specified, tests for certain compiler flags
will emit a warning, which makes the build break since we compile
with -Werror.
Change-Id: I7be56530ff9f94e5500bad226c83e47145a808d7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/336
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The xgcc toolchain may be moved by the user and passed in on the commandline. Updates the Makefile and the xcompile script.
Change-Id: I05797b2cabce39bdd7868c2515f30d34043fc8cc
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/318
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
and add drivers/generic/generic back (empty), since it is used by many
devicetree.cb files.
Without this patch typos in component names in devicetree.cb cause
the component to be silently ignored.
Change-Id: I3cfca2725816f0cd7d72139ae53af815009e8ab4
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/270
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
If a file can't be added by cbfstool, print the type and name of the file
in the error message.
Change-Id: I369d6f5be09ec53ee5beea2cfea65a80407f0ba3
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/271
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
newer gcc versions generate ".section .text" instead of just ".text"
in their assembler output. This patch makes sure that we don't end up
with a superfluous ".section" that makes the build fail.
Add -Wno-unused-but-set-variable to CFLAGS if the flag exists.
Change-Id: I7f24c987433cc5886dde2af27498d3331cbda303
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/252
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Gcc 4.1 comes with an SSP https://wiki.ubuntu.com/GccSsp
This is disabled to work around '__stack_chk_fail' symbol not found failures
http://www.coreboot.org/FAQ/Obsolete#How_do_I_fix_stack_chk_fail_errors.3F
The presence of -fno-stack-protector is tested for automatically by configure.
Change-Id: I28ef158829f5935f985cfd5a5440733685cf479a
Reported-by: Raymond Danks <raymonddanks@gmail.com>
Signed-off-by: Raymond Danks <raymonddanks@gmail.com>
Reviewed-on: http://review.coreboot.org/112
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Older libpci version have headers using 'long long' which isn't allowed
in ANSI C. Since we cannot control the libpci version installed in the
system nor in generall have complete control over system headers, simply
skip using -Werror in our makefile.
Change-Id: Ibc1e57bef033bf4971f4108d078222dcf168d5e3
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/210
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
The inline assembly for cpuid() was 32 bit specific. Additionally a
format string referencing a size_t argument wasn't using the %z length
modifier.
Change-Id: Iac4a4d5ca81f9bf67bb7b8772013bf6c289e4301
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/211
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
When building a position independent executable (PIE) EBX is used
internally by the compiler to generate position independent address
references so it cannot be used in the clobber list. Use the already
existing code for the Darwin plattform for that case, too -- it'll
preserve the EBX value.
Change-Id: Ief6d4872b8cd990856a0e8227a88bb228782aced
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/209
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
The previous version is no longer available.
Change-Id: I8126617cfe9addeb4778f002398abbcb4c73d2c7
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/214
Reviewed-by: Marc Jones <marcj303@gmail.com>
Tested-by: build bot (Jenkins)
Following patch adds a userspace util genprof
which is able to convert the console printed
traces to gmon.out file used by gprof & friends.
The log2dress will replace the adresses in logfile
with a line numbers.
Change-Id: I9f716f3ff2522a24fbc844a1dd5e32ef49b540c5
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/179
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use sed instead of ${variable:start:length} and ${#variable}
Use single = in string comparisons
Use `eval echo '$'$variable` instead of ${!variable}
Use > file 2>&1 instead of &> file
Use readlink -f to expand the path of GCC configure
Change-Id: Idc7dfcea3922f55630a6855acdb19e36582708bd
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/165
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Change-Id: I09192e57e2535b2f8f98cabeb755f10c5520c499
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/151
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
`cp --remove-destination` isn't as portable as `rm -f` and `cp`.
Change-Id: Ib05bfc121f7a0b467f8104920e14fbd02191585f
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/150
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
crossgcc also needs lzma support as w32api is distributed in .tar.lzma
Change-Id: Ia1938fa30262fe0c8bd655a08f9dc731a02e46ba
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/120
Tested-by: build bot (Jenkins)
We test for the presence of a couple of tools and even print an error.
But the tool didn't stop there.
Change-Id: I40dcf7894408ea7b24d5f68c76df4b7541f469bd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/111
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
That lint test requires some Kconfig defaults and uses allyesconfig
for that. Unfortunately that also draws in ccache and scanbuild support,
which significantly change the behaviour of the toplevel Makefile.
Notably, the ccache support breaks if no ccache is installed.
Change-Id: I17cbb7974be33fc077e5cbd5fb616a5b00a47d97
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/80
Tested-by: build bot (Jenkins)
To avoid using untrusted network to download code, copy the
relevant file to the repo and adapt "make gitconfig" to copy
from there.
Change-Id: I21f0b58d59250aa5d795cf289267ad93bd8d74db
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/73
Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
Tested-by: build bot (Jenkins)
This has been tested on a Aaeon PFM-540I RevB PC104 SBC.
Change-Id: Ie02875a1fa2d90d7cc843ce745f727312f7b7aec
Signed-off-by: Mark Norman <mpnorman@gmail.com>
Reviewed-on: http://review.coreboot.org/43
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Jenkins can produce reports from JUnit test cases, so we fake testcases
for each board.
Change-Id: I34d46d15c83f4f04d2228f302eb626b261ac098d
Reviewed-on: http://review.coreboot.org/1
Tested-by: build bot (Jenkins)
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6615 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
A couple of scenarios that were fixed in the last few revisions are
tested to ensure that it's easy to determine breakage.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6607 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This means that a simple:
$ make crossgcc
creates the reference toolchain in the correct directory. Thanks to the
dependency on the clean-for-update target, an existing .xcompile along
with any compiled objects in build/ will be cleaned out, so the next
build will automatically use the newly created reference toolchain.
Signed-off-by: Cristian Magherusan-Stanciu <cristi.magherusan@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6598 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Windows, Mac and *nix type line endings are now taken care of.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6563 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
#if defined(CONFIG_FOO) && CONFIG_FOO anymore. This was partially implemented
but didn't work for symbols that were unset because of a missing dependency.
Patch taken from SeaBIOS.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6511 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Note that the registers and their defaults are mostly based on educated
guessing, due to the lack of datasheet.
Signed-off-by: Ruud Schramp <schramp@holmes.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6484 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
http://www.coreboot.org/pipermail/coreboot/2007-September/024665.html
It's about time we follow this advice.
Also move some manually set __PRE_RAM__ defines (ap_romstage.c) to the Makefile and
drop unused CPP define
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add support for detecting/dumping the registers of Nuvoton W83627DHG-P/-PT.
This is a different chip than the Winbond W83627DHG (different IDs).
Signed-off-by: Prakash Punnoor <prakash@punnoor.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6468 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
See http://www.coreboot.org/DirectHW for more information
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6454 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
nvramtool couldn't handle certain combinations of sources for CMOS
layout and CMOS data. This change allows for nearly all combinations.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6437 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
i is a leftover from debugging, no longer needed. So just remove it.
Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier@gmail.com>
Acked-by: Sven Schnelle <svens@stackframe.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6424 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
lex.yy.c_shipped wasn't committed in r6420, which breaks the build
if you don't have the expert option checked that rebuilds those files.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6422 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Allow user to add 'subsystemid <vendor> <device> [inherit]' to devicetree.cb for
PCI and PCI domain devices.
Example:
device pci 00.0 on
subsystemid dead beef
end
If the user wants to have this ID inherited to all subdevices/functions,
he can add 'inherit', like in the following example:
device pci 00.0 on
subsystemid dead beef inherit
end
If the user don't want to inherit a Subsystem for a single device, he can
specify 'subsystemid 0 0' on this particular device.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6420 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This patch also disables FDC37M81x since it has a conflicting device ID
and is not supported very well anyway.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <reinauer@google.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6370 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: <jakllsch@kollasch.net>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6338 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It is a rather small 'Super I/O' device, containing a serial port, IR,
GPIO, and a Docking LPC switch. It is used in various Thinkpads.
Add 0x164e/0x16ef to the list of probed ports for NSC chips, as
Thinkpads are using this address pair.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6327 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The undocumented config argument for the -t option implicitly assumes
the config file is within the mainboard directory but fails to honor
this assumption when it comes to copying the file.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6314 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6313 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6312 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also: update one regex wrapper user.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6310 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6309 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6308 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6294 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
a plain binary file. Overrides using cmos.default in CBFS
if both -C and -D are given.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6286 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
When using this option, nvramtool looks for a cmos_layout.bin
and cmos.default in the image and uses these for layout information
and CMOS data.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6285 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
as loaded from a file).
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6284 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
files for CMOS data.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6283 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
the CMOS checksum specification.
When using nvramtool on files (instead of CMOS and runtime firmware)
it's the only place.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6282 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6270 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to CBFS and adapt coreboot to use it.
Comments by Stefan and Mathias taken into account (except for
the build time failure if the table is missing when it should
exist and the "memory leak" in build_opt_tbl)
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6268 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6267 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
If a file "cmos.default", type "cmos default"(0xaa) is in CBFS,
a wrong checksum leads to coreboot rewriting the first 128 bytes
(except for clock data) with the data in cmos.default, then
reboots the system so every component of coreboot works with the
same set of values.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6253 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It dumps everything you ask for, but you might not
get what you expect if the file is compressed or
otherwise converted (eg. payloads in SELF format).
(Originally it would only extract "raw" files.
This is a change by me, as filetypes are commonly used
to differentiate raw data files --Patrick)
Signed-off-by: Aurelien Guillaume <aurelien@iwi.me>
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Patrick Georgi <patrick.georgi@secunet.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6250 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware by me.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6235 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add choice to use stable or master version of seabios repository
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6223 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Only skip probing if chip was found on the same port already to avoid
duplicates.
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6222 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Hence drop the FALLBACK_ prefix
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1