Convert the lines starts with whitespace with tab as applicable.
TEST=Built google/brya0 and ADLRVP with BUILD_TIMELESS=1: no changes.
Change-Id: Ibd11ad12caa1be866a851a8cd4bd23349e8ffbbe
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51375
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define the 26th bit of the fw_config for the regular touchpad
and numpad touchpad selection.
REGULAR_TOUCHPAD: 1
NUMPAD_TOUCHPAD: 0
BUG=b:174964012
BRANCH=zork
TEST=build pass
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Ie2055d6bb45a64bc0e59209cecc0f8a31c0f3718
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
The VGA BIOS for AMD Padmelon and Google Zork are stored in `amd_blobs`.
Do not force inclusion of VGA BIOS when `USE_AMD_BLOBS` is not enabled.
Change-Id: I206e8fadc14ec0d9b162dc4d72813fdd3d43958b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
PSP_SHAREDMEM_BASE made the assumption that _psp_sharedmem_dram would
only match once. With CB:49332 there are now two symbols, and it was
grabbing the wrong one.
This change makes it so we match the exact symbol. It also switches to
using awk to simplify the code.
The bootblock.elf target that is added to the list of prerequisites also
creates the bootblock.map file that gets used to extract the base
address of the _psp_sharedmem_dram symbol.
BUG=b:181354692
TEST=Boot zork past bootblock
Fixes: 82d16b150c ("memlayout: Store region sizes as separate symbols")
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I79675bd73f964282b54bca858830e26de64037c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Some of the previous binaries were incorrect and should not be used
for Majolica because they are templates instead of APCBs specifically
built for the board. This APCB update also places the UMA region under
4G and size 32 MB which is essential for video output.
TEST=Boot with UEFI BIOS and verify we can get to OS. Also verify memory
region size, base and alignment.
Change-Id: Id797e2ad5bd67815c09752aedc19dad7dcf8ad12
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Even though AMD does not need VBT we still need to implement the
vbt_get() function to not break the build with GOP driver enabled
(see fsps_return_value_handler() in fsp2_0/silicon_init.c
BUG=b:171234996
BRANCH=Zork
Change-Id: I80a5131a9852a05998b55b847243748d24cf535f
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
To define Mainboard Type config, use the fw_config bit[26].
Check MB Type to modify SDLE settings for different VCORE IC.
BUG=b:177193131
BRANCH=zork
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: If153c0a3e641ae32ef89737925bd9f62dfb71f3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Add the UPD updating hook in early stage for customization.
BUG=b:117719313
BRANCH=zork
TEST=build,check the hook function been executed.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I4954a438a51b29b086015624127e651fd06f971b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51181
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The headers added are generated as per FSP v2081_02.
Previous FSP version was v2037.
Changes Include:
- Adjust UPD Offset in FspmUpd.h and FspsUpd.h
- Add DevIntConfigPtr and NumOfDevIntConfig UPDs in Fsps.h
BUG=b:180758116
BRANCH=None
TEST=Build and boot ADLRVP
Cq-Depend: chrome-internal:3669105
Change-Id: Ib99748a428709ffad27d47f600e00bd91b70d8f3
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51248
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Until now output of all test groups run in single unit test were
saved in the same file which caused Jenkins to fail because
of existence of multiple root XML elements.
Now each test group is saved to its own file containing its name
at the end of the filename.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I21ba512073bc8d8693daad8a9b86d5b076bea03f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The current driver is using chip registers map to configure the SAR
sensor, which is opaque, especially when the datasheet is not published
widely.
Use more descriptive names, as defined in Linux kernel documentation at
https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml
BUG=b:173341604
BRANCH=volteer
TEST=Dump all tables, check semtech property:
for i in $(find /sys/firmware/acpi/tables/ -type f) ; do
f=$(basename $i); cat $i > /tmp/$f.dat ; iasl -d /tmp/$f.dat
done
In SSDT.dsl, we have:
Package (0x06)
{
Package (0x02)
{
"semtech,cs0-ground",
Zero
},
Package (0x02)
{
"semtech,startup-sensor",
Zero
},
Package (0x02)
{
"semtech,proxraw-strength",
Zero
},
Package (0x02)
{
"semtech,avg-pos-strength",
0x0200
},
Package (0x02)
{
"semtech,combined-sensors",
Package (0x03)
{
Zero,
One,
0x02
}
},
Package (0x02)
{
"semtech,resolution",
"finest"
}
}
Change-Id: I8d1c81b56eaeef1dbb0f73c1d74c3a20e8b2fd7b
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There's no need to finalize the northbridge in SMM. This also makes
unification with Broadwell easier.
Tested on Asrock B85M Pro4, still boots and registers get locked.
Change-Id: I8b2c0d14a79e4fcd2e8985ce58542791cef9b1fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51157
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add devicetree configuration parameters for mainboard-specific settings,
and provide reasonable defaults, which should usually be good enough.
This is based on Haswell SA Reference Code version 1.9.0 (Nov 2014).
Tested on Asrock B85M Pro4, registers now have the expected values.
Change-Id: I0dcdd4ca431c2ae1e62f2719c376d8bdef3054bd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47223
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the SCI_EN bit is set, PM1 and GPE0 events will trigger a SCI
instead of a SMI#. However, SMI_STS bits PM1_STS and GPE0_STS can
still be set. Therefore, when SCI_EN is set, ignore PM1 and GPE0
events in the SMI# handler, as these events have triggered a SCI.
Do not ignore any other SMI# types, since they cannot cause a SCI.
Note that these bits are reserved on APL and GLK. However, SoC-specific
code already accounts for it. Thus, no special handling is needed here.
Change-Id: I5998b6bd61d796101786b57f9094cdaf0c3dfbaa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We saw EXT_PMIC_EN1 and PPVAR_DVDD_PROC_BC power off sequence
failure, and after checking MT6315 MT6315 PMIC protection key
summary.xlsx and MT6315 Top and CLK programming guide.docx,
we found there are something wrong about the sequence of magic
key protection flow and clk setting. Update correct initial
flow.
BUG=b:179000151
BRANCH=none
TEST=boot asurada correctly
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: I1b7f970a44904fda09a97f4064eef7c95feefad7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51245
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The initial settings for MT6315 were not applied correctly
because the setup process didn't specify correct slave id
(incorrectly always sending 0), and may cause failure in
power off sequence.
BUG=b:179000151
BRANCH=none
TEST=boot asurada correctly
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: Ifd04da8ac55bcc9f9fdbc088d430522c2725ad47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This also replaces the southbridge_ prefix of the handler functions with
a handle_ prefix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib6ea1f4e2700c508a8bf72c488043e276ba4a062
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51354
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define the ChromeOS GPIOs (physical write-protect and virtual recovery
mode) in ACPI tables so the OS knows which physical pad is used for them.
BUG=b:181887865
TEST=flashrom_tester is able to "see" the WP GPIO
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3feed366afd6507894a1d31304891cc785a4d314
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51347
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel ADL-P supports an additional memory-mapped 16MiB window into the
platform SPI flash. Support for this window already exists at the SoC
level, so all that is needed is to properly organize the flash map to
take advantage of this. FW_SECTION_A moves down to the bottom of the
available space in the lower 16MiB half, and FW_SECTION_B moves to the
bottom of the top 16MiB half. RW_LEGACY is squashed down to 2M.
BUG=b:182088676
TEST=build and boot to OS from FW_MAIN_A
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I60483b7e638c0a7e41f1f7e2b5503ae02e9906bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Prevent writes to Global SMI enable as recommended by the BWG.
Change-Id: I7824464e53a2ca1e860c1aa40d8a7d26e948c418
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add SOC_INTEL_COMMON_PCH_LOCKDOWN and PMC_GLOBAL_RESET_ENABLE_LOCK
to meet device security requirements.
LOCKDOWN has dependencies on SOC_INTEL_COMMON_PCH_BASE and
several other common block devices. Add COMMON_PCH_BASE and
COMMON_PCH_SERVER to pick up LOCKDOWN and the dependencies.
COMMON_PCH_SERVER adds the following common devices that were not
previously included by XEON_SP:
SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG
SOC_INTEL_COMMON_BLOCK_CSE
SOC_INTEL_COMMON_BLOCK_GPIO_ITSS_POL_CFG
SOC_INTEL_COMMON_BLOCK_ITSS
SOC_INTEL_COMMON_PCH_LOCKDOWN
SOC_INTEL_COMMON_BLOCK_SATA
SOC_INTEL_COMMON_BLOCK_SMBUS
SOC_INTEL_COMMON_BLOCK_XHCI
Change-Id: Iab97123e487f4f13f874f364a9c51723d234d4f0
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a server Kconfig option to select a subset of common PCH devices.
Client devices are included if server isn't selected. This maintains
the current Kconfig behavior.
Change-Id: If11d1a51192dd87ad770b8aa53ce02b6a28b8da8
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Enlarge CONSOLE_CBMEM_BUFFER_SIZE from 128K (default) to 512K, so that
more DRAM calibration logs can be stored in CBMEM console.
BUG=b:181933863
TEST=emerge-asurada coreboot
TEST="cbmem -c" shows the whole full calibration log
BRANCH=none
Change-Id: If82cbee5d2d5e97d98cbdaecda739d91a7cca0f8
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51275
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fleex has other project share the same FW. Only fleex has LTE sku.
So we need to make sure it is fleex then check if LTE sku.
BUG=b:181946744
BRANCH=octopus
TEST=Check no SAR table can be loaded with sku id 4 and 5.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I9f3d5fed4315fc716acad1a07735221d154c377e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
This file is common for all the AMD platforms.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I10ee600b4bcd7aaff39bfab075eb4dbc9096b435
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51299
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Eric Lai