On every call of hwilib_find_blocks() the CBFS file will be mapped and
the contents are parsed to get the offsets for every single block. This
is not needed if the CBFS file name is the same for the different calls.
This patch adds a storage for the currently opened CBFS file name in
CAR_GLOBAL and checks on each call if the file to open is already open.
If yes, the file will not be mapped again which saves execution time.
Test=Booted mc_tcu3, mc_bdx1 and mc_apl1 and verified that hwinfo.hex
is only mapped once across several following hwilib_find_blocks() calls.
In addition a test was done to ensure that files with different names
get mapped correctly.
Change-Id: Id69e0f6c914c2b8e4551fd8a4fb7d452d176afb3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The change bcd84fe "mb/emulation/qemu-i440fx: change file handling"
introduced a regression where it loads only 4 bytes of the
ACPI and SMBIOS table, instead of the whole table.
Load the whole ACPI and SMBIOS table.
Tested on Qemu using GNU/Linux.
Change-Id: Ibacbf7caab9be5f181c12e9dd39a2893b13cf6c9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/31593
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
USE_FSP_REPO used to rely on SOC_INTEL_COMMON_CANNONLAKE_BASE which was
getting selected for cometlake soc also. Since FSP is not yet upstreamed
for cometlake, compilation was failing due to FSP was not found.
So limiting USE_FSP_REPO option to coffeelake and whiskeylake soc only
and excluding for cometlake.
Change-Id: I5e5d5a9fdf3f5d3e79922e97719e8491aa514cef
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/31530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
For some reason, wake does not currently work from GPP_D21, but IRQs
are working fine from that gpio. Thus, we have to switch IRQ to
GPP_D21 and wake to GPP_A21, which was previously used for IRQs from
the trackpad. Additionally, we need to use two gpios for irqs and
wake source at the moment because of b:123967687, where FSP is locking
down PCR and configuring ITSS. We need to configure the wake source
gpio as inverted and the IRQ gpio as non-inverted until the bug is
resolved.
BUG=b:121212459
BRANCH=None
TEST=run evtest with trackpad
Use trackpad with ChromeOS UI and make sure it reacts as expected.
Run powerd_dbus_suspend and press trackpad and make sure DUT
wakes.
Change-Id: I7b236136befc05c6586d9ba69185ed4b5d385273
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/31533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add UART PCI driver in cavium/common/pci.
Tested on opencellular/elgon.
The UART is still initialized and usable in Linux.
Change-Id: I0fa2f086aba9b4f9c6dba7a35a84ea61c5fa64e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The latest rev. of the atlas board moves the WiFi wake source from
WAKE# to GPP_B7. The original GPP_A0 in the device tree is just
wrong. This also reconfigures DW1 to the GPP_B group so we can use
GPP_B7 as a wake source.
GPP_B7 is still configured as a no-connect in gpio.c, so this doesn't
actually enable WiFi wake. We'll follow up with another patch to set
up GPP_B7 properly on boards that support it.
BUG=b:122327852
BRANCH=none
TEST=atlas still boots
Change-Id: I1816500dd0ab6186fd51aa6945faf73d00c152fe
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Fix up the logic of when to include VBOOT2_WORK symbols on x86,
which are only needed when VBOOT_STARTS_IN_BOOTBLOCK is enabled.
Also correct the value of the __PRE_RAM__ macro in the case that
VBOOT_STARTS_IN_ROMSTAGE is selected. In this case, DRAM is
already up and verstage should not be considered pre-ram.
BUG=b:124141368, b:124192753
TEST=Build locally for eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ie51e8f93b99ab230f3caeede2a33ec8b443e3d7a
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/31541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
VBT on Intel(R) systems is available via sysfs as
/sys/kernel/debug/dri/0/i915_vbt
However the size of this file reads as 0 causing
intelvbttool to fail. This patch implements incremental reads
with realloc for such cases or whenever the file size is not
available (e.g. reading from stdin).
After this patch is applied, intelvbttool can be used as follows:
sudo intelvbttool -f /sys/kernel/debug/dri/0/i915_vbt -d
Change-Id: I5d17095a5747550b7115a54a7619b7294a846196
Signed-off-by: Alex Feinman <alexfeinman@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/31531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We experienced booting issues during FSP-M phase. Applying fix that was
introduced for wedge100s - 817994c1be (mb/ocp/wedge100s/romstage:
Workaround broken platform state) - helped and systems started to
boot properly.
Signed-off-by: Lukasz Siudut <lsiudut@fb.com>
Change-Id: Ibfbe9d19c7413098c56d1b6131640097fdf731ab
Reviewed-on: https://review.coreboot.org/c/31435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a function in gpio ASL library to set pad mode.
BUG=b:123350329
Change-Id: I6c683f27ddffc3132001706d1694c71bb5664577
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Updating from commit id a32c930e:
2018-12-28 16:14:08 -0800 - (futility: updater: quirks: Support special released SNOW RO)
to commit id 1e177741:
2019-02-14 05:27:16 -0800 - (vboot: rename VB2_DISABLE_DEVELOPER_MODE)
This brings in 11 new commits.
Change-Id: I59d83de49006a6d081b206716002697d39099aa4
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/31542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When <symbols.h> was first introduced, it only declared a handful of
regions and we didn't expect that too many architectures and platforms
would need to add their own later. However, our amount of platforms has
greatly expanded since, and with them the need for more special memory
regions. The amount of code duplication is starting to get unsightly,
and platforms keep defining their own <soc/symbols.h> files that need
this as well.
This patch adds another macro to cut down the definition boilerplate.
Unfortunately, macros cannot define other macros when they're called, so
referring to region sizes as _name_size doesn't work anymore. This patch
replaces the scheme with REGION_SIZE(name).
Not touching the regions in the x86-specific <arch/symbols.h> yet since
they don't follow the standard _region/_eregion naming scheme. They can
be converted later if desired.
Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The BL31 on RK3399 is split into multiple segments... the majority goes
into DRAM, but small parts must be put into SRAM and PMUSRAM. With
CB:31123 only the DRAM part was added to memlayout, so the SRAM parts
will not be correctly marked in bootmem and BL31 loading fails the
selfload check. This patch adds the remaining regions to fix the
problem.
Change-Id: Ia0597216c08512c47361a1dc0beb34d022a8994f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ting Shen <phoenixshen@google.com>
This reverts commit 3afb84a245.
Reason for revert: This is causing issues with the PCIe link
and the system is unable to enter S0ix. Until it can be fixed
in coreboot revert the change here that is not working properly.
BUG=b:124264120
Change-Id: Ia20da9ab560ca35950b4a916667f51e0f541b382
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31559
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
EC software sync had been disabled because BIOS was not bundling a
useful EC image. This is no longer required. This CL removes that
change so EC software sync is enabled by default.
BUG=b:124208414
BRANCH=None
TEST=Tested with a system that have a different RW image and verified
that this image was overwritten to the one bundled in the BIOS and
that the EC was running its RW image.
Signed-off-by: Scott Collyer <scollyer@chromium.org>
Change-Id: Ic1ffdb62e9fa2cacb3296cb3807082f23e171ab5
Reviewed-on: https://review.coreboot.org/c/31537
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Without newline, if IA32_FEATURE_CONTROL already locked, next
console line will be concatenated. If run on a multiple CPUs,
you get multiple lines concatenated.
Change-Id: I5b73ae4cb045973fa3ce07f4d93fda0caadf78eb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The setting of these registers are only for i2c pin.
BUG=b:80501386
BRANCH=none
TEST=Boot correctly on Kukui
Change-Id: I518ca07645fe55aa55e94e4f98178baa0b74a882
Signed-off-by: jg_poxu <jg_poxu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/30974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Old location caused spurious error messages when
called from APs, where timestamp_add_now() should
do nothing.
Moving the test also makes get_us_from_boot() usable
from APs (assuming cache coherency).
Change-Id: Ice9ece11b15bbe1a58a038cda3d299862e6f822b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31524
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For CFL and WHL, Microcode is being loaded from FIT. Both
supports the PRMRR/SGX feature. If This is supported the FIT
microcode load will set the msr (0x08b) with the Patch id one
less than the id in the microcode binary. This results in
Microcode getting reloaded again in bootblock and ramstage.
Avoid the microcode reload by checking for PRMRR support.
CFL and WHL CPU die are based on KBL CPU so we need to have
this check, where CNL CPU die is not based on KBL CPU so
skip this check for CNL.
BUG=b:124126405
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: I3311a7413d27044f9c819179e5b0cb9a67b46955
Reviewed-on: https://review.coreboot.org/c/31492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
The default mapping was probably copy-pasted from a random
board and disabled some interrupts (by implicitly clearing
some register bits).
We provide a new default mapping with some reasoning, that
tries to be most compatible (i.e. avoids to use PIRQ E-H
that are not shareable on some boards).
The following functions had their interrupt pin disabled
before:
o SATA 2 (explicitly, no board seems to enable the device)
o PCIe Root Port #4, #6-#8 (probably by accident)
PIRQs used before this change: A-D, F and H. After this
change: A-D.
Change-Id: I33f82702ea9c1b9c22ce14f01ee630dbf6203362
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31498
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Error spotted using IASL 20190215:
"Object is created temporarily in another method
and cannot be accessed"
Change-Id: I139c5c7b33671e7ed0c04c06fb290e001e57a687
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Error spotted using IASL 20190215:
"Object is created temporarily in another method
and cannot be accessed"
Change-Id: I7da9dcd68f5eec6383de7370bc8ab35f96a90c06
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We used .aml as the file extension for preprocessed ASL code. That
file gets overwritten with the compilation results, fix that.
Change-Id: I11a03dfbcebb0fd762da7b27862a7bdb9a581b92
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Variants of Hatch need to accommodate single channel DDR. Also,
removing const modifier as we'll need to set these fields
incrementally now. For the single channel configuration, we set
MemorySpdPtr10 to 0. For the dual channel configuration, we set
MemorySpdPtr10 to MemorySpdPtr00.
BUG=b:123062346, b:122959294
BRANCH=None
TEST=Boot into current boards and ensure that we have 2 channels as expected
Change-Id: Ice22b103664187834e255d1359bfd9b51993b5b6
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/31262
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch feeds PsysPmax setting to FSP through UPD and adds a
psys_pmax member in chip information so that we can set PsysPmax
through DT. The PsysPmax needs to be set correctly mapping to maximum
system power. Otherwise, system performance would be limited due to
the default PsysPmax setting in FSP is only 21W.
BUG=None
BRANCH=None
TEST=Set psys_pmax to an example value eg 101 in DT && put debug code
in FSP to print the PsysPmax value before sending to Pcode, ensure
the setting is correctly programmed.
Change-Id: Ia88ea17bc661a388c5b9bc3e59abc27c9f262977
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/31505
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds the _DSM method 5 and 6 for entering and exiting S0ix.
The _DSM method gets injected into DSDT table and called from kernel.
LPIT table is hardcoded in this patch but the proper way to implement
is to use inject_dsdt to make the _DSM methods available for soc's to
implement.
Calling the LPIT table from mainboard here so that with the current
implementation the platforms which do not have lpit support throw
compilation error.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ia908969decf7cf12f505becb4f4a4a9caa7ed6db
Reviewed-on: https://review.coreboot.org/c/31101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The requirements read a bit as if we only encourage coreboot experts to
try to take on these projects. These requirements should be understood
as "this is what you'll need to learn", hopefully guiding interested
people in picking a project that suits their interests.
Change-Id: I43b6e2e0df5f00e1ded8d14cee8c771e3f595ce7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31480
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Static scan-build indicates a possible invalid return from function
spi_flash_cmd_erase(). The root cause is because the scan believes it's
possible for offset to be above the end address in the first pass, thus
not setting a value for variable ret. Assign initial value of -1 to
variable ret to make checker happy.
BUG=b:112253891
TEST=build grunt
Change-Id: If548728ff90b755c69143eabff6aeff01e8fd483
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The current implementation was designed for x86_32, so don't
attempt to compile it on x86_64 until it is fixed.
Fixes compilation error on x86_64.
Change-Id: Ibd87dc2979f6d45a988119c06c5f9e61b3e86171
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/31467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Every printk() call already does console_tx_flush()
so there should not be anything in transmit buffer
when we return from console_init().
Change-Id: Iff2927c02d2c8031907620a056782bb014f20162
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31369
Reviewed-by: Xiang Wang <wxjstz@126.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
New whiskeylake v-0 stepping have changed the graphics device id from
0x3EA0 to 0x3EA1 for celeron, so declare that in common code. Also the
CPUID was changed from 806EB to 806EC, include that as well.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ief5213a96507124b90f8dd2eeea2f6bf43843dc6
Reviewed-on: https://review.coreboot.org/c/31433
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Follow b:123461432#5 to update GPIO H3(CNVI_EN#) for DVT1.
Update setting GPIO H3 to output and low level.
BUG=b:123461432
TEST=Built and tested on sarien system
Change-Id: I6a56df9a7bf75f49133a646312ae5093c2652698
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/31412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Follow thermal table (b:123383634 comment#1) for EVT1 tunning.
BUG=b:123383634
TEST=Built and tested on sarien system
Change-Id: I22908e4bf39aedb8cf31a9060084f6f36bff56ca
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/31170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
"mosys memory spd print all" returns incorrect memory ranks info.
This patch and 2 upcomming ones (one in FSP) will address the issue.
BUG=b:122329046
TEST=Boot to OS on Bobba variant of Octopus
BRANCH=octopus
Change-Id: I212215040e4786c258a9c604cc5c2bb62867c842
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Reviewed-on: https://review.coreboot.org/c/31235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use the common VMX implementation, and set IA32_FEATURE_CONTROL
lock bit per Kconfig *after* SGX is configured (as SGX also sets
bits on the IA32_FEATURE_CONTROL register).
As it is now correctly based on a Kconfig, the `VmxEnable` devicetree
setting vanishes.
Test: build/boot google/[chell,fizz], observe Virtualization enabled
under Windows 10 when VMX enabled and lock bit set.
Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29682
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Werner Zeh