Does native ram init for Intel Atom D5xx 8086:a000 northbridge
Tested on Intel D510MO mainboard, board boots linux kernel
- Works fully with both dimms populated (2x2GB), memtest passes 100%
- Almost boots with only one dimm in one of the slots
(suspect bad memory map with one dimm?)
- Reads garbage with only one dimm in other slot
Change-Id: Ibd22be2a959045e0a83aae2a3a0e877013f80711
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/12501
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Existence of requested PCI device was not checked when enabling
IDE mode on the SP5100. Fix incorrect PCI device ID and check
for device existence before attempting setup.
Change-Id: I726c355571b5c67c9a13995be2352601c03ab1e4
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12572
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Decision Feedback Equalization (DFE) is a form of dynamic
link training used to lower the overall error rate within
the coherent fabric. Enable it on all capable HT links.
Change-Id: I5e719984ddd723f9e375ff1a9d4fa1ef042cf3eb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12072
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
The existing code did not properly detect various link attributes
on Family 10h/15h processors. With the addition of new HT3- and
IOMMU-specific code, proper detection has become critical to avoid
system deadlocks.
Fix and streamline link attribute detection.
Change-Id: If63dd97f070df4aab25a1e1a34df4b1112fff4b1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12071
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The existing code re-used the Family 10h XCS buffer setup on
Family 15h CPUs, which set incorrect values leading to random
system lockups.
Use the Family 15h XCS buffer setup shown in the BKDG.
Change-Id: Ie4bc8b3ea6b110bc507beda025de53d828118f55
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12070
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Minor change to be more explicit about the binary state
of the iolink detect variable.
Change-Id: Ifd8f5f1ab28588d100e9e4b1fb0ec2525ad2f552
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12069
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The secondary bus number set code incorrectly overwrote the link
buffer settings in F0x[F4,D4,B4,94]. Constrain the secondary
bus number set to the appropriate bits of the registers.
Change-Id: If70825449f298aa66f7f8b76dbd7367455a6deb1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12068
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The Family 15h DRAM initialization did not set up the various
tristate enable codes in the MCT.
Add Family 15h tristate enable setup. This fixes multiple
DIMMs on a single channel.
Change-Id: I0278656e98461882d0a64519dfde54a6cf28ab0f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12060
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
The Kconfig symbol CONFIG_HT3_SUPPORT is not implemented.
This mirrors commit c5163ed8 (AMD binaryPI: Drop HT3_SUPPORT)
Change-Id: I2682d3b620e2cee613c7421622a8c79db5ba3a86
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12556
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Most of the toolchain build targets already ran clean-for-update, but
there were a few that didn't. Add the clean to those targets.
Change-Id: I7faad32ac8bb1815e0c58e7d142ca2dbfc877896
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12571
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of having to remember to strip the quotes everywhere so that
string comparisons (of which there are a few) match up, do it right at
the beginning.
Fixes building the image with a .config where CONFIG_CBFS_PREFIX
contains quotes.
Change-Id: I4d63341cd9f0bc5e313883ef7b5ca6486190c124
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12578
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
The symbol BAYTRAIL_SMM was never valid (there's no config statment
initializing the symbol), but it was being selected and used
in the code.
Now that SMM is supported in fsp_baytrail, the code it was trying
to switch can be removed, and just set up for SMM.
Change-Id: I0fd4865a951734e728500e7baf593ff7eb556f73
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12553
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
There is no need to continue testing a DCT configuration after
data errors have already been detected; this just wastes time
during boot.
Change-Id: I979e27c32a3e0b101590fba0de3d7a25d6fc44d2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12066
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This adds a new mainboard: Little Plains for Intel's atom c2000
It was based on Mohon Peak board with some minor changes
This board is not available as standalone product
It is a managment board for
Intel Ethernet Multi-host Controller FM10000 Series
The FSP package is available from Intel: https://www.intel.com/fsp
Change-Id: I28127a858106ed35d26e235f0c6393c20ed14350
Signed-off-by: Marcin Wojciechowski <marcin.wojciechowski@intel.com>
Reviewed-on: https://review.coreboot.org/12503
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The CPU <--> CPU HT wiring on this board has only been validated
to 2.6GHz. While higher frequencies appear to function initially,
and in fact function when only one CPU package is installed, dual
CPU package systems will lock up after around 6 - 12 hours of uptime
due to presumed HT link errors at the higher (>= 2.8GHz) HT clocks.
If applications are not being used that stress the coherent fabric,
then the uptime before hang may be much longer. Users attempting
to overclock the HT links are advised to "burn in test" the HT links
by running memtester locked to a node with no local memory installed.
Change-Id: I8fae90c67aa0e8b103e9b8906dea50d1e92ea5a9
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12064
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The BKDG recommends the use of an antiphase window detection
algorithm to ensure that the DQS data eye is properly centered.
TEST: Booted both with DIMMs known to move the data eye into the
prior clock phase and DIMMs known to keep the data eye in the
current clock phase.
Change-Id: I1d85fddd45197ca82dcaa46fe863e64589712d1f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12059
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Martin Roth <martinroth@google.com>
As far as I can tell the Kconfig symbol DRIVERS_I2C_IDREG never actually
existed in the coreboot codebase. I didn't see anything that it might
have been a typo of.
Change-Id: Ib17de670e38e07ab4a4745143c42fa85da1754e1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12563
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The odd rank of each DIMM could experience data corruption due to
incorrect DQS training. Fix the DQS training algorithm by executing
the relevant portions of the training algorithm on the odd ranks.
Change-Id: Ibc51f5052d5189e45b3d9aa98ca8febbfe13f178
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12058
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Also fix incorrect Trfc[0-3] value on Family 15h.
Change-Id: Iafc233984ae1d44fe6a1cb5b109d36397cbd991a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12055
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Hiding them requires #if CONFIG_HAVE_SMI_HANDLER instead of
if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER))
Change-Id: Ib874cd98e195ad7437d05be1696004b29bf97a66
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/12565
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
That allows this special case to become a normal cbfs-files instance,
too.
Change-Id: I896ffebe4cec64c9c11605b4f09c7790e5419928
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12539
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Use cbfs-files-y to deal with some of the manually added cbfs files,
providing more structure to that part of the build.
Change-Id: Iee1b8fec81dfa5e5f0e55637a62e5f69bd0257ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12538
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add files with fixed positions, then files with alignment requirements
and finally those that can reside everywhere to prevent the most obvious
collisions.
This isn't perfect yet (the "aligned" group may need some additional
sorting), but should avoid the worst instances ("free floating" files
allocating space required by fixed location files, for example).
Change-Id: I871e1a92ad90e63fc4e299fe1b228b4b00a35930
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12536
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The silicon in control of CC6 appears to contain minor bugs
and / or deviations from the BKDG; through trial and error
it was found that these issues can be worked around by reserving
the entire possible CC6 save region, regardless of currently
installed node count.
Change-Id: If31140651f25f9c524a824b2da552ce3690eae18
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12054
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The more generic 8250 driver can handle both port-mapped and memory-
mapped 8250-compatible UARTs, with different register sizes. Thus, a
separate driver for MMIO32 is not needed.
The generic 8250 driver was tested to work for both output and input,
on Apollolake SoC, which only presents an MMIO32 UART.
Change-Id: Idab766588ddd097649a37de92394b0078ecc660a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/12524
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The missing brackets caused other registers, including the IO APIC
enable bit (EAN in OIC) to be overwritten. Bug introduced by
bde6d309 (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer)
Change-Id: I1d5aa2af6d74405a1a125af6221ac0e635a6b693
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/12525
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
By adding the version number of tools, we can help people keep up to
date with their tool versions. This will be used now to determine
whether the IASL version being used is the version supported by
coreboot.
Change-Id: I24a68b01c819871f90403869570125e71b96bd70
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12545
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add an empty Operating Region for the empty _REG method
- Move Named objects out of _CRS Method
- Remove Kconfig default disabling IASL warnings as errors
Fixes these items:
dsdt.aml 1449: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
dsdt.aml 1458: Method (_REG, 2)
Warning 3079 - ^ _REG has no corresponding Operation Region
Change-Id: I801a84468097687c91d6ee3f44cec06243355fac
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12531
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add specific build targets for IASL & CLANG and help for those targets
- Consolidate tool target .PHONY entries
Change-Id: If2960d75310495d9e486b3a08808463a2ff0c644
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12541
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change leading spaces to tabs.
Change-Id: Ief138f5f68198578ba9dddb8fbdabbd9a0185a21
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12546
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add an empty Operating Region for the empty _REG method
- Serialize _CRS Method
- Remove Kconfig default disabling IASL warnings as errors
Fixes IASL Warning and remark:
dsdt.aml 1451: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
dsdt.aml 1460: Method (_REG, 2)
Warning 3079 - ^ _REG has no corresponding Operation Region
Change-Id: I4aa59468a89c4013146ab34004476a0968c60707
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12521
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Mingw doesn't have that this function.
Change-Id: I640ea61ff24fba812e3f10771dd7e468dcfc63dd
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/11724
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This makes the make process look like the one inside
of coreboot's build system.
Change-Id: I48be2df39cad47644e16ce583b27c33a1da81fc3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12509
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fixes early fault problem on Fam0Fh introduced in
Change I8e01a4ab68b463efe02c27f589e0b4b719532eb5,
commit 991f18475c.
Change-Id: Id215d2822b78917939c28f7a922a94e02e5d15bf
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: https://review.coreboot.org/12528
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
PSP2 is for Combo BIOS, which is the idea that one image supports 2
kinds of APU.
The PSP2 feature is for the future, not for current products.
The newest document about PSP2 is not available. I made it from the
draft code I made when I was in AMD.
Change-Id: I65328db197c02ee67f3e99faf4ab8acabd339657
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/12474
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If any path in a method returns a value, IASL expects that all paths
within that method will return a value.
Presumably, the ATPX would not need a return value if Arg0 is anything
other than 0, so just return a zero.
- Serialize ATPX method to make IASL happy. This means that it can
only be used by one thread at a time.
Fixes these issues:
dsdt.aml 2581: Method (ATPX, 2, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
dsdt.aml 2581: Method (ATPX, 2, NotSerialized) {
Warning 3115 - ^ Not all control paths return a value (ATPX)
Change-Id: I14aeab0cebe4596e06a17cffc36cc01b953d7191
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12518
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Touchpad and Touchscreen _CRS methods do not return an interrupt
value if the I2c busses that the devices are on are not in PCI mode.
Previously they didn't return any value if they weren't in PCI mode.
This patch has them return an empty resource template.
Fixes these warnings:
dsdt.aml 2813: Method (_CRS)
Warning 3115 - ^ Not all control paths return a value (_CRS)
dsdt.aml 2813: Method (_CRS)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _CRS)
dsdt.aml 2832: Method (_CRS)
Warning 3115 - ^ Not all control paths return a value (_CRS)
dsdt.aml 2832: Method (_CRS)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _CRS)
Change-Id: I02a29e56a513ec34a98534fb4a8d51df3b70a522
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Affects these mainboards:
- lenovo/g505s
- google/parrot
- hp/pavilion_m6_1035dx
Fixes IASL notice for this specific instance:
dsdt.aml 1952: Method (_CRS, 0, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
Change-Id: Id297cdea35d43f51887f798a9983629343c2313a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12513
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add an empty Operating Region for the empty _REG method
- Serialize _CRS Method
- Remove Kconfig default disabling IASL warnings as errors
Fixes IASL Warning:
dsdt.aml 1362: Method (_REG, 2)
Warning 3079 - ^ _REG has no corresponding Operation Region
Fixes IASL remark:
dsdt.aml 1353: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized
(due to creation of named objects within)
Change-Id: Iff01613a6e3238469c1fcb8d74f5e98d18420aaf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12515
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Damien Zammit