Fine tune USB2, need to override the following registers.
port#1:
PERPORTPETXISET=7
PERPORTTXISET=0
BUG=b:35858164
BRANCH=reef
TEST=built, measured eye diagram on snappy, and reviewed by intel
Change-Id: I461cf8f032b4e70abc9707e6cd3603a62cee448f
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/18590
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds support for the Wildcat Point LP for intelmetool.
When the tool detected a Wildcat Point LP,
then the ME will be reported as difficult-to-remove.
Change-Id: I35423db11cdc1e21e7f02ce90dace7fb4d236c45
Signed-off-by: Huan Truong <htruong@tnhh.net>
Reviewed-on: https://review.coreboot.org/18575
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The intel ME checker tool would segfault if it reaches the end of
the loop without having the dev pointer set. This happens when
it gets to the end of the previous loop without knowing what to do
with any of the devices it sees.
This patch makes sure the pointer is not NULL before accessing it.
Change-Id: Ia13191799d7e00185947f9df5188cb2666c43e2a
Signed-off-by: Huan Truong <htruong@tnhh.net>
Reviewed-on: https://review.coreboot.org/18573
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Fix whitespace: Change some spaces to tabs
- Add myself as an abuild maintainer
- Add util/xcompile and util/genbuild_h to the BUILD SYSTEM section
- Add new sections for utilities: docker, toolchain, and git
- Remove GENERIC DRAM section
- Remove the mailing list. We don't want it to be added as a reviewer.
Change-Id: I78692fcac174d7b7c4d65911c85e4e2dacefcfc0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18578
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
No board with binaryPI currently supports HAVE_ACPI_RESUME. For
platforms with PSP the approach is also very different from what
we previously had here.
Furthermore, s3_resume.[ch] files under cpu/amd/pi do not
distinguish between NonVolatile and Volatile buffers of S3 storage.
This means the Volatile buffer that is maintained and available in
CBMEM is unnecessarily copied to SPI flash. This has been fixed on
open-source AGESA directory, so development of S3 suspend support
with binaryPI is better continued with that.
Unfortunately there are further complications and indications that
open-source AGESA may have always had a low-memory corruption
issue. This has to be investigated separately before restoring
or claiming S3 is supported on binaryPI.
Change-Id: I81585fff7aae7bcdd55e5e95bc373e0adef43ef0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18501
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
None of the boards currently have HAVE_ACPI_RESUME and
and ACPI S3 support calls should not appear under board
directories anyways.
Change-Id: I1abd40ddba64be25b823abf801988863950c1eb5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18500
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
The file is used for fam15.
Change-Id: I7cdf238a8f7be4bf79546bcfc3c9d05bd8986e3e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18635
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Definitions are not part of ACPI S3 feature, nor do
they require any AGESA headers so move them to a
better location.
Change-Id: I9269e9d65463463d9b8280936cf90ef76711ed4f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18616
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Declaration of main in cpu/amd/car.h conflicts with the
definition of main required for x86/postcar.c in main_decl.h.
Change-Id: I19507b89a1e2ecf88ca574c560d4a9e9a3756f37
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18615
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Note that M and M_PRO had same DefaultPlatformMemoryConfiguration
defined, use one for both.
Change-Id: Ia1925957800a7fe6ef511b2d041f7a863c8fc931
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18606
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Relocate the enabling of the LAPIC out of the southbridge source and
surround it with a check for CONFIG_UDELAY_LAPIC (typical for AMD
systems). The LAPIC is now enabled for all cores; not only the BSP,
and not only when the UART is used.
This solves the problem of APs not having their APICs enabled when
the timer is expected to be functional, e.g. verstage often uses
do_printk_va_list() instead of do_printk() which exits early for
APs when CONFIG_SQUELCH_EARLY_SMP=y.
The changes were tested with two Gardenia builds, one using verstage
and another with CONFIG_SQUELCH_EARLY_SMP=n.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 93ffc311165f19d4192a5489051fa4264cd8e0ad)
Change-Id: Ieaecc0bf921ee0d2691a8082f2431ea4d0c33749
Signed-off-by: Marc Jones <marcj303@gmail.com>
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18436
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Only declare S3 support in ACPI if CONFIG_HAVE_ACPI_RESUME
is set.
Change-Id: I6f8f62a92478f3db5de6feaa9822baad3f8e147e
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/18493
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Add some generic functions that can configure the SPI interface to
have faster performance.
Given that the hudson files are used across many generations of FCHs,
make sure to refer to the appropriate BKDG or RRG before using the
functions. Notable differences:
* Hudson 1 defines read mode in CNTRL0 differently than later gens
* Hudson 1 supports setting NormSpeed in Cntr1 but Hudson3 allows
setting FastSpeed as well
* Kabini, Mullins, Carrizo and Stoney Ridge contain a "new" SPI100
controller
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 1922d6f424dcf1f42e2f21fb7c6d53d7bcc247d0)
Change-Id: Id12440e67bc575dbe4b980ef1da931d7bfae188d
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/18442
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Add defines that will be used later for setting the fastest settings
in the SPI controller.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 0d2c28b8156dcc1f3dc925b3c3ba15b6b07f202c)
Change-Id: I660cc9ed6910c33042321c80453c7f74912455d9
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/18441
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Remove unused definitions from a .c file and use the BIT(n) macro
found in types.h instead. Convert existing definitions to BIT(n).
Orignial-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit f403d12b49985ee9d9b339a6659b60ef1560519c)
Change-Id: I24105bf75263236dbdbc2666f03033069d1d36d2
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/18440
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Fix the error detected by checkpatch and update the copyright date.
TEST=Build and run on Galileo Gen2
Change-Id: Idc55169913e7b7b0aca684c26f6ed3b349fc6c09
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18592
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Fix the errors detected by checkpatch and update the copyright dates.
TEST=Build and run on Galileo Gen2
Change-Id: Idad062eaeca20519394c2cd24d803c546d8e0ae0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18591
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Gru/Kevin use 933 MHz (actually 928 MHz for better jitter) as max sdram
frequency, while bob uses 800 MHz.
It's normal some variants can't meet 928 MHz SI requirement and hence
have to use a lower freq as spec.
BUG=chrome-os-partner:61001
BRANCH=gru
TEST=check dpll is 800 MHz on bob
Change-Id: I6d19a351f25d1f48547715ce57c3a87d9505f6f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8176bfea52422c713f144ffec419752aeca66db2
Original-Change-Id: I46afba8d091f1489feeb20cafc44decaa81601fc
Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/420208
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Shasha Zhao <Sarah_Zhao@asus.com>
Original-Tested-by: Shasha Zhao <Sarah_Zhao@asus.com>
Original-(cherry picked from commit eba5dff79eeedae5ff608d2d8d297ccf9c13cb55)
Original-Reviewed-on: https://chromium-review.googlesource.com/448277
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/18581
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The K4B4G1646E-BYK0 shares sdram config with K4B4G1646D-BYK0.
For clarity, sdram-ddr3-samsung-2GB now is used by
- K4B4G1646D-BYK0
- K4B4G1646E-BYK0
- K4B4G1646Q-HYK0
BUG=chrome-os-partner:62131
BRANCH=veyron
TEST=emerge
Change-Id: Ie43f23bf8f5f5b1acbb74c85cac17fe181c841c4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 46d62d87101e0ee1050b00db02b3ecaa4587e9f4
Original-Change-Id: I461c6f36c28ea0eeaf7d64292c9c87ab0c9de443
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/446197
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-(cherry picked from commit f98251a4a4fe4d49721a936a684f6ac80f3f6405)
Original-Reviewed-on: https://chromium-review.googlesource.com/446300
Reviewed-on: https://review.coreboot.org/18519
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This adds SDRAM entries for the following modules:
- Micron: DDMT52L256M64D2PP-107
- Hynix: H9CCNNNBKTALBR-NUD
They are compatible with Samsung K4E8E324EB-EGCF, so this just
copies sdram-lpddr3-samsung-2GB-24EB.inc and changes the name used
in the comment near the top.
Notes on our "special snowflake" boards:
- veyron_danger's RAM ID is hard-coded to zero, so I skipped changes
involving the binary first numbering scheme.
- Rialto's SDRAM mapping is different, so I padded its SDRAM entries
to 24 to match other boards.
- veyron_mickey requires different MR3 and ODT settings than other
boards due to its unique PCB (chrome-os-partner:43626).
BUG=chrome-os-partner:59997
BRANCH=none
TEST=Booted new modules on Mickey (see BUG)
Change-Id: If2e22c83f4a08743f12bbc49b3fabcbf1d7d07dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35cac483e86e57899dbb0898dad3510f4c2ab2d3
Original-Change-Id: I22386a25b965a4b96194d053b97e3269dbdea8c7
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/412328
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Queue: Jiazi Yang <Tomato_Yang@asus.com>
Original-Tested-by: Jiazi Yang <Tomato_Yang@asus.com>
Original-(cherry picked from commit bd5aa1a5488b99f2edc3e79951064a1f824062f6)
Original-Reviewed-on: https://chromium-review.googlesource.com/446299
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18518
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Fix the following issues:
* A raw read is described by a single read segment, don't assert.
* Support reads longer than the FIFO size.
* Support writes longer than the FIFO size.
* Use the 400 KHz clock by default.
* Remove the error displays since vboot device polling generates
errors.
TEST=Build and run on Galileo Gen2
Change-Id: I421ebb23989aa283b5182dcae4f8099c9ec16eee
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18029
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Configure the right GPIOs for finger print sensor interrupt and reset
lines.
As per the schematics GPP_C8 is for sensor interrupt and GPP_C9
is for sensor reset.
Change-Id: Ib25c68ec2fe20b1302b6170d67ceab7e8cca1a83
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18389
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
One very long line has to be wrapped to be shorter than 80 characters to
satisfy the lint scripts.
Note, that this gets rid of the brackets ().
Change-Id: Ie98eff360ebc5b68ce496edc15eb2d9fddcac868
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/18556
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
This was removed from the previous version, but we'd like it in
a separate patch, so it's obvious and can easily be applied to the
next version.
Change-Id: I9396009e82e762aa0cc037dbe9e7133962af6354
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18577
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is version 03aed21 from linux/scripts, updated on Dec 12, 2016.
The version needs to be updated because Perl version 5.20 deprecated the
/C regex expression. Perl version 5.24 removed it completely, so the
old version fails to run on the coreboot builders.
Change-Id: Ib97997237ca64c65d7f91d568ae4bec000804331
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18571
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Status:
- The primary PCIe 16x slot works:
It was tested with a GPU compatible with nouveau
- USB and audio are not very reliable
- The ethernet card is not seen with lspci
- The secondary pcie16x slot isn't working:
When plugging a GPU inside, it's not seen with lspci
- SATA works: The board fully boots GNU/Linux
- Serial doesn't work
- Populating the RAM slots might have to follow
the recommended memory configuration that is described
in the mainboard manual in order to be able to boot.
Note that when running the shutdown command, the default
boot firmware will rewrite part of the boot flash before
powering off the machine.
Flashing coreboot internally from the default boot fimrware can
still work, if the power plug is removed after running flashrom.
Change-Id: I934de521d0acceb7770f23b2ae15c31a67ae73eb
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/16931
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These definitions do not require AGESA.h include,
and we will eventually remove agesawrapper.h files.
Change-Id: I1b5b78409828aaf2616e177bb54a054960c3869f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The size of the array did not match that of the actual
allocation. Furthermore, the tables are written as
part of set_pci_irqs() in hudson/pci.c.
Also the removed code was never reached runtime, as it is
only executed on ACPI S3 resume path that is currently
disabled.
Change-Id: If1c47d53a7656bdff40d93fc132c8c057184ae46
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18587
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This file is only static defines.
Change-Id: Id50a0eba1ce240df36da9bd6b2f39a263fa613df
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18585
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The current elog implementation has two event types defined for 0xa7,
apparently the result of divergent coreboot trees on chromium where
some events were added to ARM systems but not upstreamed until later.
Fix this by moving ELOG_TYPE_THERM_TRIP to be 0xab, since the current
elog parsing code in chromium is using ELOG_TYPE_SLEEP for 0xa7.
BUG=b:35977516
TEST=check for proper "CPU Thermal Trip" event when investigating a
device that is unexpectedly powering down.
Change-Id: Idfa9b2322527803097f4f19f7930ccbdf2eccf35
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18579
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Move all common MSRs as per IA SDM into a common location
to avoid duplication.
Change-Id: I06d609e722f4285c39ae4fd4ca6e1c562dd6f901
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18509
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Select all Kconfig belongs into Intel SoC Family block/ips common
code model and include required header.h file.
Change-Id: Idbce59a57533dbeb9ccfadca966c3d7560537fa0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18377
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Currently, when using `iasl` 20140926-32 [Oct 1 2014] from Debian 8
(Jessie/stable), the build of the Lenovo X60 fails due to syntax errors.
ASL 2.0 supports `<<`. For consistency, right now, coreboot still uses
the old syntax. So use `ShiftLeft` instead, which also fixes the build
issue with older ASL compilers.
Change-Id: Id7e309c31612387da3920cf7d846b358ac2bdc71
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/18520
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
All files:
- Previously, various things were hardcoded into the docker containers
that made it necessary to update the Dockerfile files for each new
version of the sdk. Turn those into 'Variables" that are updated during
the build step. Because the makefile is piping the dockerfile through
the sed command and back into the docker build command, the normal
docker "COPY" keyword doesn't work.
coreboot-jenkins-node changes:
- Run ssh-keygen -A to explicitly generate the ssh keys. This fixes an
error: Could not load host key: /etc/ssh/ssh_host_dsa_key
coreboot-sdk changes:
- Remove apt-get upgrade command - The Dockerfile guide recommends
not to run this.
- Change libssl-dev to libssl1.0-dev. libssl-dev's header files won't
build the Chrome-EC codebase.
- Add libisl-dev, needed to build the riscv toolchain.
- Build the toolchain using the -b option
- Add environment variables containing the version and commit that the
coreboot-sdk was built from.
Makefile:
- Update targets to use the version and commit variables
Change-Id: I2c1376fe4b791da2a62fca11bc92c4774cbef1c8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18001
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
- GCC gets updated from 5.2.0 to 6.3.0:
gcc-6.3.0_riscv.patch is a diff between 5fcb8c4 and 173684b in
riscv-gcc, and it needs gcc-6.3.0_memmodel.patch.
- Binutils goes from 2.26.1 to 2.28:
There is a build error for MIPS gold so I add patch for it.
- GMP gets a bump from 6.1.0 to 6.1.2
- MPFR is updated from 3.1.4 to 3.1.5
- GDB is upgraded from 6.1.1 to 6.1.2
- IASL is changed from 20160831 to 20161222
- LLVM is changed from 3.8.0 to 3.9.1
Change-Id: I20fea838d798c430d8c4d2cc6b07614d967c60c5
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17189
Tested-by: build bot (Jenkins)
Support for voltage margining is dependent on the platform.
Enabling voltage margining puts additional constraints for
the SLP_S0# to be asserted and hence moving to S0ix state.
If the platform PMIC/VR supports PCH voltage reduction,
voltage marigining can be enabled.
Use the UPD provided by FSP to enable/disable voltage margining.
Change-Id: Iea214e9d7d6126e8367426485c6446ced63caa66
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18469
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is selected by default and not overwritten anywhere else for this
board.
Change-Id: I0f803e130366ee322163f7bb6fa16cac75f5416e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18541
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
As we drive both channels with the same speed,
chan0dll and chan1dll are the same.
Change-Id: I7253ea9ea66396c536c82d63c67fecb041681707
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/18472
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins)
AGESA AmdInitEarly() reconfigures the lapic timer in a way that
conflicts with lapic/apic_timer.
This results in an endless loop when printk() is called after
AmdInitEarly() and before the apic_timer is initialized.
This patch forces a reconfiguration of the timer after
AmdInitEarly() is called.
Codepath of the endless loop:
printk()->
(...)->
uart_tx_byte->
uart8250_mem_tx_byte->
udelay()->
start = lapic_read(LAPIC_TMCCT);
do {
value = lapic_read(LAPIC_TMCCT);
} while ((start - value) < ticks);
[lapic_read returns the same value after AmdInitEarly()]
Change-Id: I1a08789c89401b2bf6d11846ad7c376bfc68801b
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-on: https://review.coreboot.org/17924
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Relevant changes (commit 250b2ec):
* Fix a bug for ME6 Ignition images.
* Fix signature checking for ME11 and later.
* Add command line arguments.
* Add an option to relocate the FTPR partition to the top of the
ME region, recovering most of the ME region space.
* Print the image minimum size.
* Add write boundary checks, to prevent writes on other regions
in case of bugs.
The new changes have been tested on multiple platforms by the
me_cleaner users. They have been tested also on the author's
X220T with coreboot, where the ME region has been shrinked up to
84 kB without any issue.
Change-Id: I3bd6b4cba9f5eebc3cd4892dd9f188744a06c42b
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18473
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>