On Sarien, change pin config of 0x19 (headset mic) and
0x21(headset headphone) to change jack location so that naming does
not use "Front" in the name."Front Headphone" --> "Headphone" so it
matches naming on Arcada.
BUG=b:126334749
TEST= verify with 'evtest' command that jack name is
"HDA Intel PCH Headphone" not "HDA Intel PCH Front Headphone"
Change-Id: I36ccf0c0a3952ab363fe6ee313fac8f0cce4dd61
Signed-off-by: Joyce Toh <joyce.toh@intel.com>
Reviewed-on: https://review.coreboot.org/c/31624
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The fdt in the maskrom cannot be used to start linux. The correct fdt
is dumped by replacing the bbl of the original firmware and used in
coreboot.
Correct the mac address in fdt by reading otp
Change-Id: Ic29f0e590311360b85fafd12ebc36cd189fbbc38
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/c/31047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Calculation of memory reserved by FSP is incorrect.
Use CBMEM_ID_FSP_RESERVED_MEMORY to determine the memory area
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: If68bda39ba2b1f3be4ed4bc872710be7bbd4948b
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Preliminary dptf change for Atlas
- Throttle charger using all temp sensors (not just ambient)
- Throttle charger with higher priority than CPU
- Update throttle temperature using data from surface thermistor
in thermal chamber test
BUG=b:113101335
BRANCH=None
TEST=based on preliminary data from thermal chamber test
Change-Id: Ic1ab72f569e8a4f7bffc5560518fb703d32f4b21
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Caveh Jalali <caveh@google.com>
The level/edge mode of PIRQ is not configured and i8259 PIC not initialized.
Add calls to:
- i8259_configure_irq_trigger()
- setup_i8259()
- write_pci_config_irqs()
to correct the configuration of interrupts.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: I128cb35dd0e348a9cd9fb162651e0aa2b7e4a3ef
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
IRQ10 and 11 are not available as _PRS in all LNKx ResourceTemplates.
These interrupt numbers are added to all LNKx.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: Ie7a263d7d50f7f85e6195777c1429dcc27a15604
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29287
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Static scan does not know the contents of the fixed MTRR descriptor, so
it has no way to eval the result for variable num_ranges. If num_ranges
is less or equal to 0, the for loop will not be entered, and the values
of fixed_msrs will not be set. Asserting that num_ranges is greater than
0 ensures the loop enters at least once.
BUG=b:112253891
TEST=build grunt
Change-Id: Ieec0ac432c745bde4b1700539c266625da6cfd77
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
After loading compressed files in CBFS, we should check the decompressed
size is equal to the expected size. This might help us detect file
content corruption or compressor/decompressor bugs.
BUG=none
BRANCH=none
TEST=manually (we can still boot into kernel on Kukui, and verify that
loading files from CBFS still works by seeing ChromiumOS firmware
screen).
Change-Id: Ia756cc5477670dd0d1d8aa59d4160ab4233c6795
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/31564
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, cbfs_decompress() calls ulzma() and ulz4f() for LZMA/LZ4
decompression. These two functions don't accept input/output size as
parameters. We can make cbfs_decompress more robust by calling ulzman()
and ulz4fn() instead. This could prevent us from overflowing destination
buffer.
BUG=none
BRANCH=none
TEST=boot into kernel on Kukui with COMPRESSED_PAYLOAD_LZMA /
COMPRESSED_PAYLOAD_LZ4.
Change-Id: Ibe617825bd000ed618791d8e3c5f65bbbd5f7e33
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/31606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
These marketing names are much easier to distinguish. My
mnemonic: Socket M => up to Merom, Socket P => up to Penryn.
Change-Id: I3c2a59596cf7f3cd763bd79962ad326ab080677b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31645
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These came for the Socket 479 which is not supported anymore.
Change-Id: I0cf7ece028baa6750b79f54d615e93e452aff2e1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31644
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These sneaked in and were never supported by this socket (nor expected
in the notebooks that have it).
Change-Id: Iaeaf1d3bba213da56c7841cf6182e013626b8ca2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The name was wrong. mFCPGA478 is actually a pseudonym for mPGA478MN,
the successor of the socket that was meant.
The official name of this socket is mPGA478MT. But "Socket M" is much
easier to distinguish.
Change-Id: I4efeaca69acddfcdc5e957b0b521544314d46eeb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Doesn't look like it could be used.
Change-Id: I8074df12d062bd15f2388b367b3698c9d3b7b5b6
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
coreboot did not program all GPIOs from C0 to C7 correctly which are
SMBUS GPIO. Some of the GPIOs are left in default mode which is
native function but we need to configure as GPIO mode and provide proper
configuration as per schematic.
After fixing GPIO, CSME power gating issue also gets fixed since SMBUS was not
getting idle due to GPIO configuration and CSME was not getting power
gated due to SMBUS.
BUG=b:123702553
BRANCH=none
TEST=Check on hatch board. CSME was not getting power gated for s0ix.
After applying this patch CSME is power gated now
Change-Id: I5c6b9310dcc7bade0023abd5524781ce71df28be
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/31640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Change ac8c60e (soc/intel/cannonlake: Disable ACPI mode as part of
pmc_soc_init) moved disabling of ACPI mode to pmc_soc_init to keep it
more aligned with the behavior on other Intel SoCs. However, as the
PMC device is hidden, it never gets enumerated and so init function
does not get called for it. This change moves the call to disable ACPI
mode to exit of BS_DEV_INIT instead.
BUG=b:126016602
TEST=Verified that:
1. pmc_set_acpi_mode is actually getting called.
2. EC panic event gets logged to eventlog correctly.
Change-Id: Ie7025e322fa0abc21367a520184a4c7741eba1e6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31633
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Initialize RTC at ROM stage.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I9d9c68755e8a6ac65dd794211e6ccf06e5057567
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/31508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This patch implements RTC initialization.
1. initialization dcxo
2. rtc clock using dcxo 32k
3. export RTC_32K1V8_0 to SOC, export RTC_32K1V8_1 to WLAN
4. rtc register initialization
5. refactor the driver common part
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Icccb9360a507fcbfd865b107cd3630e71c810d55
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/31046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Assumed broken during review and rebase. The
SPD at address 0x52 will appear at index 1.
Change-Id: I213853d2b981294554d8d1b254da476905a41c13
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: PraveenX Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Fix cases of using ENV_SMM where __SIMPLE_DEVICE__
should be used instead.
Change-Id: I385c82767a87ff7a47466a200488fae9fc8b863d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Because coreboot's asserts aren't fatal by default, scan-build finds
problems in code that is actually protected by an assert. This
change fixes that and allows us to add asserts to protect
against other failures.
Change-Id: I9fa605d6309bb40a9cef33b434c9256bf731f457
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/31650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of using 2, 0 is now used for non-CBI provisioned board or
corrupted CBI board to confrom to the sku encoding.
BUG=b:123676982
BRANCH=kukui
TEST=test with un-provisioned board to verify the sku_id.
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I66f29f8a46cd774b40354def7d3623ec44cb96ce
Reviewed-on: https://review.coreboot.org/c/31623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For fast CBMEM console use minimum BIOS_DEBUG level.
For other consoles, Kconfig and/or nvram settings
apply.
Change-Id: Iff56a0a3182f258200cac80e013957d598cc2130
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Various instances of google_chromeec_command() can return non-zero number
(both positive and negative) to indicate error -- fixing cbi_get_uint32()
and cbi_get_string() so they follow the same convention.
BUG=b:123676982
BRANCH=kukui
TEST=build with kukui/flapjack configurations
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I7f0a8a61d01d942cba57036a17dd527fdbbf940c
Reviewed-on: https://review.coreboot.org/c/31585
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function appeared previously unused (called only from rtc_display, also unused),
but it returned an incorrect weekday. Change the algorithm to use Zeller's Rule, a
well-known algorithm for calculuating weekdays.
Change-Id: Ibce6822942f8d9d9f39c2b6065cd785dca9e8e09
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Hatch implements active high SD_PWR_EN and requires a workaround
in _PS0 and _PS3 control methods to make sure SD_PWR_EN stays low
in D3. Select MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE to enable the same.
BUG=b:123350329
Change-Id: I96ab9660eb50100207fe9a237f5924b65eae0928
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
SD controller in CNL-PCH provides a ability to configure the behavior of
SD_VDD1_PWR_EN# as an active high or low signal. FSP provides an UPD
"SdCardPowerEnableActiveHigh" to control the same.
However, for platforms using SD_VDD1_PWR_EN# as active high, the SDXC
card connector is always powered and may impact system power. This is because
SD_VDD1_PWR_EN# does not de-assert during SDXC D3 or when SD card is not
inserted.
Workaround is to change the pad ownership of SD_VDD1_PWR_EN to GPIO and
force the TX buffer to low in _PS3. And restore the pad mode to native
function in _PS0.
Hence add a Kconfig option to update the UPD, which the board can select
based on how the SD_VDD1_PWR_EN is implemented on it. And, the workaround
gets applied based on this config.
BUG=b:123350329
Change-Id: Iee262d7ecdf8c31362aec3d95dd9b3e8359e0c25
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31445
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SD_CD# in Cannonlake PCH is also wired to an internal virtual GPIO,
expose that GPIO for kernel to configure card detect IRQ.
BUG=b:123350329
Change-Id: I566cc2eb11dc257366897a1efba905b8ddcf493d
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Adapted from Chromium commit 5351dc0d
[Edgar: To set the RX ODT limit and dram geometry with RAMID detection]
Several cyan variants require memory init parameters be passed to FSP
for handling of specific Micron modules; without these, RAM init will
fail when loading training data from the MRC cache, and boot will halt.
This was missed when I upstreamed edgar along with the other cyan
variants, so add the required memory init parameters for edgar as per
its source Chromium branch.
Test: build/boot on edgar board with affected Micron memory
modules, verify boot successful with populated MRC cache.
Change-Id: I6a2bc30b54ff1a17c854a90dfcb2308d27ee2be7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31615
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To support measured boot, drop VBOOT_RETURN_FROM_VERSTAGE.
The SoC has enough CAR space to support a separate verstage.
Tested on OpenCellular Elgon.
Change-Id: I18022000f6f05df89d3037896ef627070bfcca06
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/31568
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC initialization on Cannon Lake happens earlier in the boot sequence
than other SoCs because FSP-Silicon init hides PMC from PCI bus. As
ACPI disabling was done as part of PMC init, it was being called
earlier than what other SoCs do. This resulted in a different order of
events for some drivers e.g. ChromeOS EC. In case of ChromeOS EC, it
ended up clearing EC events (which happens as part of ACPI disabling
in SMM) before logging any events of interest that happen during
mainboard initialization.
This change moves the call to disable ACPI to pmc_soc_init just like
other SoCs to keep the order of events more aligned.
BUG=b:126016602
TEST=Verified that EC panic event gets logged to eventlog correctly.
Change-Id: Ib73883424a8dfd315893ca712ca86c7c08cee551
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Each smbios entry should be followed with two null bytes. In other
structures it's done by adding `u8 eos[2]` extra bytes at the end, it
was omitted in type38 (IPMI) though. This change fixes this - tables
decodes nicely:
```
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA2 (I/O)
Register Spacing: 32-bit Boundaries
```
Signed-off-by: Lukasz Siudut <lsiudut@fb.com>
Change-Id: I8efea9612448f48e23e7b2226aea2a9f3bc21824
Reviewed-on: https://review.coreboot.org/c/31482
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are functions defined on headers with no code written for. They
probably existed earlier, were removed and forgot in the headers. Remove
functions from headers if there's no actual code written for.
BUG=b:123564495
TEST=Build grunt.
Change-Id: Ia6a12e22a0944351c455dc2c3b534f09a258bd7b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This patch clarifies the definition of google_chromeec_command.
Currently absence of the definition isn't causing any problem because
wrapper APIs check 'ret != 0' or wrapper APIs check 'ret < 0' for an
interface which returns only negative error codes.
However, there is a chance that a new wrapper API will be addedl which
check 'ret < 0' to catch errors, assuming other interfaces behave the same.
Or existing wrapper APIs will be broken as soon as they're compiled for
another interface.
BUG=chromium:935038
TEST=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I2ce7109b5f2a1d5294f167719730bc1f039ba03f
Reviewed-on: https://review.coreboot.org/c/31613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Kyösti Mälkki