The Cezanne PSP configures the eSPI with the assumption that it's a
majolica, setting up both the serial port and the majolica EC IO decode
ranges. Since guybrush is NOT a majolica, this doesn't work very well
there. Clearing the decode ranges allows the guybrush platform to set
the decode ranges needed for its EC.
BUG=b:183524609
TEST=Set up eSPI on Guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I77cfb948cb9ae6d1cf001bd9e66cede8d93f50b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Previously, the eSPI code would only add to existing decode ranges, and
there wasn't any way to clear ranges. This clears all the ranges so
the eSPI configuration can start fresh.
BUG=b:183207262, b:183974365
TEST=Verify on Guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ic4e67c40d34915505bdd5b431a064d2c7b6bbc70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The sizeof() operator was being applied to a pointer-to-struct type.
Correct this, so that the entire struct space gets cleared.
Change-Id: Ieab3aaa2d07a928f27004b94132377d5dae935c0
Found-by: Coverity CID 1451732
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52054
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Sam Lewis <sam.vr.lewis@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Ideally we would like to perform EC Software Sync in payload. But with
the hardware requirement (EC_IN_RW) and firmware requirement (TPM
command to get EC execution environment) not met yet, adding the support
to perform early EC Software sync. With EFS2 enabled, this will also
help cr50 to set the boot mode as NORMAL instead of NO_BOOT.
BUG=None
TEST=Build and Boot to OS in Guybrush. Ensure that the EC software sync
is successfully complete.
CBFS: Found 'ecrw.hash' @0x50400 size 0x20 in mcache @0x020171ec
VB2:check_ec_hash() Hexp RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
VB2:check_ec_hash() Hmir: 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
<snip>
VB2:check_ec_hash() Heff RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6
VB2:sync_ec() select_rw=RW(active)
Change-Id: I820e651c6b22a833fef6f17a4ceb5a8cfb6f1616
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Needed so we write the correct resource into the ACPI tables.
BUG=b:183737011
TEST=Boot OS and see GPIO devices working
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2ba4349e0ed500912db40aa6ef9b649046f4358f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51961
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows the cr50 on guybrush to show up in ACPI.
BUG=b:183737011
TEST=Boot OS and see I2C devices initialized
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifb5679b7bbefbf753217981874bb1bdaef35f6db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51958
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pci_rom_ssdt reloads the oprom from cbfs. It then places it into cbmem
and writes the offsets as the ROM ACPI node. The GOP driver modifies the
VBIOS so we don't want to reread from cbfs. When using GOP we also pass
the offsets with the VFCT table.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaf53e750564f1f0e115cd354790da62e672d74b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The coordtype parameter of acpigen_write_CSD_package expects a CSD_coord
enum value, but HW_ALL that got passed as parameter is a PSD_coord enum
value, so replace that with the correct CSD_HW_ALL enum value.
TEST=Timeless build results in identical binary for Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Found-by: Paul Menzel <pmenzel@molgen.mpg.de>
Change-Id: I90b19345b8dc6d386b6acfa81c6c072dcd6981ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Causing the AOAC register access as part of system suspend (S3) causes
the suspend procedure to be stuck. Comment it for now to unblock
entering S3 and collecting the power numbers.
BUG=b:181766974
TEST=Build and boot to OS in Majolica. Enter S3 through "echo mem >
/sys/power/state".
Change-Id: Ie93bbe393b209b784b9a2257f3916b29d84b25d1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51926
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To generate a working BPM, boot policy manifest for Intel CBnT the
tool that generates it, requires ACPI base and PCH PWRM base as input.
Therefore make it a Kconfig symbol, that can be used in Makefile.inc.
Change-Id: I6f1f9b53e34114682bd3258753f2d5aada9a530d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51805
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Maps the useable RAM so that it can be used for booting a payload.
TEST: Booted a simple ELF payload (that just flashes LEDs) on the
Beaglebone Black.
Change-Id: I7f657c97e4753071c90ba8ca800a96108807e6b9
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44388
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adds code taken and (barely) adapted from U-Boot (release 2020.04,
commit 36fec02b1f90b92cf51ec531564f9284eae27ab4) for SDRAM initialization.
This should in theory work for other configurations than the Beaglebone
Black's DRAM configuration, but hasn't been tested.
Change-Id: Ib1bc2fa606f7010c8c789aa7a5c37cd41bc484b9
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44386
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adds a "sd_media" boot_device to allow booting from the SD card. This
assumes that the generated "MLO" file is placed at a 128KB offset from
the start of the SD card, to allow for the MBR etc. to be at the start
of the SD card. Placing the MLO file here allows the AM335x boot ROM to
load and execute the bootblock stage as well, as 128KB is one of the
offsets the boot ROM checks when looking for the next stage to execute.
As part of this, a FMD for the Beaglebone has also been defined. It's
sized at 32M somewhat arbitrarily, as SD cards could allow for much
bigger payloads.
TEST: Beaglebone boots from bootblock into romstage. Romstage to
ramstage still doesn't work as it needs RAM initialization first.
Change-Id: I5f6901217fb974808e84aeb679af2f47eeae30fd
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44385
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adds a driver for the am335x MMC peripheral. This has only been tested
with SD cards and probably needs some modification to use eMMC or MMC
cards.
It's also currently a little slow as it only supports reading a block at
a time.
Change-Id: I5c2b250782cddca17aa46cc8222b9aebef505fb2
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Fix the format warning below by using `PRIxPTR`, which is defined as
unsigned long.
src/soc/amd/common/block/smbus/smbus.c:33:56: error: format specifies type 'size_t' (aka 'unsigned int') but the argument has type 'uintptr_t' (aka 'unsigned long') [-Werror,-Wformat]
printk(BIOS_ERR, "Invalid SMBus or ASF base %#zx\n", mmio);
~~~~ ^~~~
%#lx
src/include/console/console.h:60:61: note: expanded from macro 'printk'
#define printk(LEVEL, fmt, args...) do_printk(LEVEL, fmt, ##args)
~~~ ^~~~
1 error generated.
Change-Id: I727c490d3097dcf36cdbcd4db2852cd49d11785f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Move the parts of romstage.c that populate the UPD-M data structure to
the newly created fsp_m_params.c file. Since
platform_fsp_memory_init_params_cb gets called from the FSP driver and
not directly from car_stage_entry the two code parts in romstage.c
weren't directly interacting.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1f7f5879ac318372042ff703ebbe584ce1c32c91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Move the parts of romstage.c that populate the UPD-M data structure to
the newly created fsp_m_params.c file. Since
platform_fsp_memory_init_params_cb gets called from the FSP driver and
not directly from car_stage_entry the two code parts in romstage.c
weren't directly interacting. Since soc/romstage.h only contains the
mainboard_updm_update function prototype, rename it to soc/fsp.h. This
patch also removes a few unused includes.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I52c21f13520dbdfab37587d17b3a8a3b1a780f36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This file populates the UPD-S data structure that gets passed to the
FSP-S, so add that s part to make it a bit clearer which FSP parameters
it'll set up. This is also a preparation to add a fsp_m_params.c file in
the following patches.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I53786df0909055e66eac675b5580909b7960944f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The KBRST_L pin will cause a reset when driven or pulled low even when
the GPIO mux is set to GPIO and not native function. So when you want to
use that pin as general purpose output the keyboard reset input
functionality needs to be disabled by selecting this option in the
board's Kconfig file to avoid causing a reset by writing a 0 to the
output level bit when it's configured as an output.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Furquan Shaikh <furquan@google.com>
Change-Id: I517ad551db9321f26afdba15d97ddb61be1f7d51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51757
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=none
TEST=Build guybrush and verified with the PPR that the register and bits
are still the same
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0619f84cf82cbb90ded9dfd58afa6acc9520fb8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
TEST=Verified that this register and the defined bits exist in Cezanne,
Picasso, Stoneyridge, Bolton and SB800.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I32d1d577b05edab006981516a5aefd822e7b984a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add processor power limits control support to configure values for
alderlake soc based platforms.
BRANCH=None
BUG=None
TEST=Build and test on alderlake rvp board
Change-Id: I9dc37c7a43e6bd6f1ff5e8a97e22a0c7ac421802
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The gpio_get_index_in_group function returns the index of the GPIO
within its own group
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7f6b312bd1d0388ef799cd127c88b17bad6a3886
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
REG_BASE_SIZE is supposed to represent the size of the REGBAR MMIO space
in KiB. It is currently sized at 4MiB, but this is incorrect, EDS Vol. 2
indicates REGBAR is 16MiB in size, therefore update the constant to
reflect this.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I0cfbe5b8bb07faa854efd4bf70640daa117f2bb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This name isn't very meaningful, rename the config option to
ENABLE_TCSS_DISPLAY_DETECTION to make its meaning more obvious.
Change-Id: Ib21a3b5a37d25f93bd515f8c6e5ad39c9d2ea1c4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51771
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Type-C subsystem ("TCSS") IP block is similar between TGL and
ADL. For pre-boot purposes, the limited amount of functionality required
appears to be common between the two, therefore move the functionality
to intel/common/block and rename from `early_tcss to `tcss` along the way.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I1c6bb9c7098691f0c828f9d5ab4bd522515ae966
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51753
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds a pin configuration macro that supports both switching a
pin to its native function and configuring it as a SCI source. This is a
preparation to remove the GPIO2 soc_gpio_hook.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If0da5c010f35fd902f6b8857368daec93c12394a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50373
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to use a fixed-width type here.
Change-Id: I727c64661990040db356c5508fecc0a65960c095
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51794
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The correct printf format specifier for an `unsigned int` is `%u`.
Change-Id: Iaf780eb366f8c3493b89beb9a5643fa285e7825d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51793
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ANX7625 requires the line packets to end at the same time.
Otherwise, the display will be shifted.
BUG=b:173603645
BRANCH=kukui
TEST=Display is normal on Jacuzzi
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Change-Id: I5949de1a9a1947fa188233787166a478b1de68b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Lists of changes:
1. Rename MISCCFG_ENABLE_GPIO_PM_CONFIG -> MISCCFG_GPIO_PM_CONFIG_BITS
2. Move MISCCFG_GPIO_PM_CONFIG_BITS definition from intelblock/gpio.h to
soc/gpio.h. Refer to detailed description below to understand the
motivation behind this change.
An advanced GPIO PM capabilities has been introduced since CNP PCH,
refer to 'include/intelblock/gpio.h' for detailed GPIO PM bit definitions.
Now with TGP PCH, additional bits are defined in the MISCCFG register
for GPIO PM control. This results in different SoCs supporting
different number of bits. The bits defined in earlier platforms
(CNL, CML, ICL) are present on TGL, JSL and ADL too. Hence, refactor the
common GPIO code to keep the bit definitions in intelblock/gpio.h, but
the definition of MISCCFG_GPIO_PM_CONFIG_BITS is moved to soc/gpio.h so
that each SoC can provide this as per hardware support.
TEST=On ADL, TGL and JSL platform.
Without this CL :
GPIO COMM 0 MISCCFG:0xC0 (Bit 6 and 7 enable)
With this CL :
GPIO COMM 0 MISCCFG: 0x00 (Bit 6 and 7 disable)
Change-Id: Ie027cbd7b99b39752941384339a34f8995c10c94
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
List of changes:
1. Update GPIO Group to GPE DWx assignment encoding as per MISCCFG
register per GPIO Community.
2. PMC_GPP_* macros are also updated as per GPIO_CFG register
in PMC space.
BUG=b:183464235
TEST=Able to fix the TPM IRQ issue on SM.
Change-Id: Id9f57b0b5726315f5ebba013f11d52ed3ee34484
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51789
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the PCH PCI device defines out of the SOC specific PCI defines
and into a common include. The PCH is common and doesn't need
duplicate definitions.
Change-Id: I1ca931e0f01e03c67f8f65ed7fd33c2c1d22183d
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add function to allow overriding the RcompResistor and
RcompTarget UPDs from mainboard if required.
Mainboard users can pass required rcomp from memory.c file.
Refactor ddr_config structure to take out rcomp related variable
outside for all memory type to override if required.
BUG=b:182772421
TEST=Able to override the default RcompResistor and RcompTarget
values.
Change-Id: Ie8528bbf0517728534d47f9adaabfc9a2c469609
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
List of changes:
1. Alder Lake MRC is expecting a RcompResistor value of word width.
Reference RCOMP resistors on motherboard are ~ 100 Ohms but coreboot
is passing an array of RcompResistor which is not completely in use.
Note: Rcomp resistor value represents rcomp resistor attached to
the DDR_COMP pins on the SoC.
2. Also, remove usage of '&' with memcpy the required value into
RcompTarget array.
3. Also, update RcompResistor value for ADLRVP.
BUG=b:183341229
TEST=Enable FSP debug log to verify the override value for
RcompResistor is reflecting correctly.
Change-Id: I69c7cec55b65036fc039c33374a3fd363ef7004e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
commit 4f87ae1d4a introduced a regression
in the I2C initialization resulting in soc_i2c_misc_init never getting
called, since the continue statement was indented like it belonged to
the if above, but due to the missing curly braces it was outside the if
block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Found-by: Coverity CID 1451395, 1451387
Change-Id: Id1f17ad59cba44e96881f5511df303ae90841ab3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51786
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a helper bit mask to enable wake from either S0i3 or S3.
BUG=None
TEST=Build the Guyrbush mainboard.
Change-Id: I934abad78135260081a61aee4c496b362e483de1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPIO129 is muxed with KBRST, so setting GPIO129 to low causes reset
when KBRSTEN is set to 1. Since reset value of KBRSTEN is 1 we need a
logic to clear it.
BUG=b:183340503
TEST=build
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I194e8432a14d6105f6bcf12111647f5aad4e2de2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Use the MRC cache API for asurada, and sync dramc_param.h with dram
blob (CL:*3674585). With this change, the checksum, originally stored in
flash, is replaced with a hash in TPM. In addition, in recovery boot,
full calibration will always ne performed, and the cached calibration
data will be cleared from flash.
This change increases ROMSTAGE size from 236K to 264K. Most of the
increase is caused by TPM-related functions.
Add new API mtk_dram_init() to emi.h, so that 'dramc_parameter' can be
moved to soc folder.
With this CL, there is no significant change in boot time. Normal AP
reboot time (fast calibration) is consistently 0.98s as before, so
this change should not affect the result of platform_BootPerf.
BUG=b:170687062
TEST=emerge-asurada coreboot
TEST=Hayato boots with both full and fast calibration
BRANCH=none
Cq-Depend: chrome-internal:3674585, chrome-internal:3704751
Change-Id: Ief942048ce530433a57e8205d3a68ad56235b427
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Enlarge ROMSTAGE from 256K to 272K for the upcoming change of MRC cache
(CB:51620). To have more compact space usage, reduce BOOTBLOCK size from
64K to 60K (only 44K needed), and move starting address of DRAM blob
(DRAM_INIT_CODE) to 0x210000 (64K-aligned).
BUG=b:170687062
TEST=emerge-asurada coreboot
TEST=Hayato boots
BRANCH=asurada
Cq-Depend: chrome-internal:3704751
Change-Id: I7aaf9faf048e0adcb3a7d856d40891762c9a6604
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This makes the EM100 option visible in Kconfig that makes sure that the
SPI settings that coreboot applies are valid for the EM100 that has some
limitations on the maximum SPI frequency and possibly on the supported
SPI modes. For the PSP SPI settings, the mainboard still might need to
provide EM100-specific settings for EFS_SPI_READ_MODE, EFS_SPI_SPEED and
EFS_SPI_MICRON_FLAG. Haven't checked if those PSP settings are correctly
integrated for Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5dec9ce69628ca3623b5009d47f4b3dc020a3dad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add a pad configuration macro to support configuring both wake and
debounce. This support is required by Pen Detect GPIO.
BUG=b:180539900
TEST=Build Guybrush mainboard.
Change-Id: I3343a4e80fd5aa3047d76ff9f91ea57c3763bbca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
When the soc_get_mbox_address functions returns 0 after not being able
to find an initialized PSP base address MSR or in case of Stoneyridge
the PSP's BAR3, the code will print an error string. This string needs
to reference both PSP_ADDR_MSR and PSP BAR3 and not only the latter one,
since in Picasso and Cezanne only the former one is present.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I32a1e87e2a7d89c7b53f47c987e7bf0556154cf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
