Duncan Laurie 74ea48efb3 soc/intel/skylake: Add devicetree variable for PCIe HotPlug ... Add a variable to fill out the FSP UPD variable for PCIe HotPlug, which allows a mainboard to enable HotPlug on individual root ports. BUG=b:72417777 TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux that it is identified as a HotPlug capable root port. Change-Id: I6b1f525e41909a3f81984806c4ef20239032c8d6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23511 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>		2018-02-06 15:19:25 +00:00
..
acpi	soc/intel/skylake: Add support for mode-aware DPTF	2018-01-30 20:20:43 +00:00
bootblock	soc/intel/skylake: Clean up the skylake PCH H device ID macros	2018-01-25 16:12:46 +00:00
include	soc/intel/skylake: Set PsysPl3 and Pl4	2018-02-05 19:22:44 +00:00
nhlt	soc/intel/kabylake: Add Dialog da7219 NHLT blob support	2017-11-07 23:37:01 +00:00
romstage	soc/intel/skylake: Send correct ddr_type to SMBIOS Table	2018-01-25 05:48:01 +00:00
acpi.c	soc/intel/skylake: Always add PM1_TMR block to FADT	2018-01-31 09:56:10 +00:00
chip.c	soc/intel/skylake: Add devicetree variable for PCIe HotPlug	2018-02-06 15:19:25 +00:00
chip.h	soc/intel/skylake: Add devicetree variable for PCIe HotPlug	2018-02-06 15:19:25 +00:00
chip_fsp20.c	soc/intel/skylake: Add devicetree variable for PCIe HotPlug	2018-02-06 15:19:25 +00:00
cpu.c	soc/intel/skylake: Set PsysPl3 and Pl4	2018-02-05 19:22:44 +00:00
elog.c	soc/intel/skylake: Probe XHCI for wake source for Internal PME	2017-10-19 00:43:45 +00:00
finalize.c	soc/intel/skylake: Set low maximum temperature threshold for Thermal Device	2017-11-30 16:27:12 +00:00
gpio.c	soc/intel/skylake: Use common/block/gpio	2017-10-02 22:32:33 +00:00
graphics.c	intel: Prepare registers so Windows drivers are happier	2018-01-29 09:41:35 +00:00
gspi.c	soc/intel/{cannonlake,skylake}: Add _soc_ prefix in spi soc routine	2017-11-11 18:19:31 +00:00
i2c.c	drivers/i2c/designware: reduce API complication for bus config	2018-01-25 22:36:30 +00:00
irq.c	soc/intel/skylake: Enable common LPC IP	2017-10-03 20:23:21 +00:00
Kconfig	drivers/intel/fsp2_0: Unbind UDK2015 Kconfig from FSP2.0 driver	2018-01-31 05:56:19 +00:00
lockdown.c	soc/intel/skylake: Enable common LPC IP	2017-10-03 20:23:21 +00:00
lpc.c	soc/intel/common: Add option to pass SoC IO resource	2018-01-17 17:47:33 +00:00
Makefile.inc	soc/intel/skylake: Make use of common SMM code for SKL	2017-12-22 01:44:18 +00:00
me.c	soc/intel/skylake: Make use of common CSE code for skylake	2017-11-15 16:44:36 +00:00
memmap.c	soc/intel/skylake: Make use of common SMM code for SKL	2017-12-22 01:44:18 +00:00
pei_data.c	soc/intel/skylake: Make use of common SMM code for SKL	2017-12-22 01:44:18 +00:00
pmc.c	soc/intel/skylake: Move Enable power button SMI code from smi.c to pmc.c	2017-12-21 03:52:59 +00:00
pmutil.c	security/vboot: Move vboot2 to security kconfig section	2017-10-22 02:14:46 +00:00
reset.c	soc/intel/skylake: Add support in SKL for PMC common code	2017-10-05 21:11:39 +00:00
sd.c	soc/intel/skylake: Use SCS common code	2017-06-16 17:37:13 +02:00
smihandler.c	soc/intel/{apollolake, cannonlake, common, skylake}: Add _soc_ prefix in weak function	2017-12-23 05:23:09 +00:00
smmrelocate.c	soc/intel/skylake: Make use of common SMM code for SKL	2017-12-22 01:44:18 +00:00
spi.c	soc/intel/skylake: Make use of Intel SPI common block	2017-11-11 18:19:39 +00:00
systemagent.c	soc/intel/skylake: Move UNCORE PRMRR base and mask defines.	2017-09-15 16:21:29 +00:00
thermal.c	soc/intel/skylake: Set low maximum temperature threshold for Thermal Device	2017-11-30 16:27:12 +00:00
uart.c	soc/intel/skylake: Clean up UART code	2017-12-07 03:21:04 +00:00
vr_config.c	soc/intel/skylake: Override KBL IccMax settings	2018-01-12 18:21:15 +00:00