Setup cyan to be the baseboard for other Google Braswell
boards, to be added in subsequent commits:
- Keep code common to all Google Braswell boards in the baseboard,
and separate out the board-specific bits into the new cyan variant.
- Define the I2C ACPI devices such that they can be easily reused for
other variants.
- Switch the trackpad/touchscreen interrupts from edge to level,
for better performance/compatibility, as was done with all previous
Google boards.
- Add code to the baseboard to allow optional variant-specific
parameters to be used for both memory and silicon init.
- Remove superfluous includes, replace some hardcoded values with
variables, and correct typos/formatting errors.
Change-Id: Iabbbad16efa9cfa79338f4e94d0771779900d8d9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There are old legacy onboard devices which are too slow for a coreboot
boot with log level BIOS_ERR. In this case coreboot is so fast that these
devices do not have enough time to become visible on the PCI bus and
this in turn leads to missing resource allocation for this devices. The
most generic way to work around this problem on existing hardware is to
introduce a delay right before the PCI enumeration starts. The needed
delay time depends on the hardware and will therefore be get from
hwinfo.
Change-Id: Ia91babc81e3a347bbc498c3def97b2ea70e10922
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/21518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Add a function to retrieve the elapsed time since boot. For that purpose
use the base time in the timestamp table among with the current
timestamp at call time of the function. So more precise the returned
time is the elapsed time since the timestamp was initialized scaled
in microseconds. This was chosen to get a reliable value even on
platforms where the TSC might not be reset on software reset or warm
start.
Change-Id: Ib93ad89078645c0ebe256048cb48f9622c90451f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/21516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There's no reason to mutate the struct device when determining
the ACPI name for a device. Adjust the function pointer
signature and the respective implementations to use const
struct device.
Change-Id: If5e1f4de36a53646616581b01f47c4e86822c42e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It was originally designed such that if usbdebug_init() was called
before cbmem_initialize(), it would fetch the already-initialized
state from CBMEM. This changed when cbmem_find() behaviour changed
to require cbmem_initialize() to be called first. As a result,
ramstage had to reinitialize all of the EHCI controller and USB
endpoints on entry. This was slow, specially with AMD hardware
where one can scan USB ports to probe for the debug dongle.
For postcar and ramstage, move usbdebug entry such that it is
triggered from CBMEM_INIT_HOOK instead of console_init().
Side-effect of this is usbdebug console shows 'coreboot-xxx ...
starting...' line only for romstage.
Initialisation for usbdebug is never done in postcar. If you have
USBDEBUG_IN_ROMSTAGE=n, postcar will not have console output on
usb either.
While at it, fix also some other __PRE_RAM__ cases to ENV_ROMSTAGE
and alike.
Change-Id: If8ab973321a801abc5529f3ff68c5dccae9512ad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
All thse Option.*Install.h files are about configuring
what eventually is referenced in the final libagesa
build. It's self-contained so isolate these together
with PlatformInstall.h to hide them from rest of
the build.
Change-Id: Id9d90a3366bafc1ad01434599d2ae1302887d88c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
One liner that fixes a warning with clang
Change-Id: I4d7dfaa5fcf0e95acd650e4c129e0899b5d68f09
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Martin Roth <martinroth@google.com>
An internal index `i` was previously allocated as
Elf64_Half which is uint16_t. Bumping to uint64_t
increases the number of allowed symbols and prevents
a segfault in processing a larger ramstage.debug file.
Also introduce a separate counter for the number of sections.
Change-Id: I9ad2f64c452cef2e7bf957f766600891cb5ae798
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There were two copies of the same definitions in the file.
Change-Id: Iafb10476f32505f6b4ad7b5ba6fa5de2c4648836
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
To avoid error with symbol redefinition (using clang):
src/drivers/intel/fsp1_0/fsp_util.c:111:22: error: invalid symbol redefinition
".global find_fsp\n\t"
Rename the asm global symbol to find_fsp_bypass_prologue and fix jmp.
Change-Id: I84c152f9a580fdfc40e9f6e998d2d6484b7f47df
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fine tune usb 2.0 strength for port 4 to pass eye diagram.
BUG=b:65306272
TEST=build on soraka, measure usb2.0 eye diagram, and result is pass.
Change-Id: I2c79e96e2e3dea1364d7b71af19b57f4c9307fcb
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/21403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The Stoney Ridge APU can never be used in a multi-node system. Reduce
the feature set to a single node.
Remove the static variables for each D18Fn device and replace the routines
with coreboot config read and write functions.
Strip down domain_set_resources() to consider only a single node. A
follow-on patch will further simplify this.
Change-Id: I1982b3fbf8dbb44ca75112c57afa59a2b4e4cf5a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Remove the check for the southbridge link from Stoney Ridge. The APU
is an SoC which can never be installed in a multi-node system. It is
pointless to detect and remember the sblink value, which is set by
hardware and comes up 0. The BKDG marks this as a reserved field vs.
documentation for multi-node-capable Family 15h devices.
Because there is only one option for SB link now, relocate the register
write done by set_vga_enable_reg() and remove the function.
Change-Id: Ie4ce6b5aa847a184534224db302437ff8d37c14b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Delete the check for sibling cores and the programming of CPUID HTT
and CmpLegacy back-door bits. The code has no effect on modern
Family 15h APUs. The bits being modified come up set out of reset.
Change-Id: Ida76863d84109b49ce6b12c71bad5b44331a2ff9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the step of setting PSP BAR3 from cpu_dev_ops .init. The
BAR is configured in romstage by AmdInitPost().
Change-Id: I7e77fad3abdcb6482f1b9d849e5922a426dff5f5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Make the default for SMM_TSEG_SIZE depend on SMM_TSEG in addition to
HAVE_SMI_HANDLER.
Change the value returned by cbmem_top() to carve out a range to be
used by TSEG. The SMM Mask register has a granularity of 128KB but
align the value to 16MB to keep down the number of variable MTRRs
required.
Change-Id: I54ffc10108862b7d022fbbd92bf97525b349df27
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Use fixed resources for LPSS uart devices for debugging purpose.
BUG=NONE
BRANCH=NONE
TEST=Boot up with coreboot rom, without this changes, serial log will
stop print anything during PCI resourcre setup as MMIO address of UART
will be re-assigned.
Change-Id: Ib773e01d5f5358f13297400075d6920793200b88
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/21412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
These two boards have been boot tested with EARLY_CBMEM_INIT
and is good to go.
Change-Id: I2e69901ed83502894f6794b3c1d7bab9aab95e51
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21351
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Implement cbmem_top() required for cbmem support in romstage.
Boot tested on asus/p2b-ls. Boards to move to this setup in
followup patches.
Change-Id: I432f145a5343c1bb5f2b0de3b6b88f57124d1bd9
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/20977
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
EC needs to have command to set SKU ID from APU to support
specific feature (ex: keyboard backlight) for variant board.
BUG=b:65359225
BRANCH=reef
TEST=emerge-snappy coreboot
Change-Id: I8cd3b8f646d4134d6bfff2869f6df2d9c615c157
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/21504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a new parameter to hwilib called LegacyDelay. It will be used to
define a delay time to wait for legacy devices if coreboot is too fast
for old and slow onboard devices.
Change-Id: Id0386fdea0ecfb3c1ff6ec1c456071246529950a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/21517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a timestamp before and after waiting for the ME to acknowledge the
DRAM being ready.
This allows easier debugging during use of me_cleaner and/or alternate
ME images.
Change-Id: Ie228e12a75d373b4f406b3595e1fb1aab41aa5df
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-on: https://review.coreboot.org/21465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch fixes the build issue by replacing UART_DEBUG_BASE_ADDRESS
macro with UART_BASE_0_ADDR macro to configure LPSS UART base adress
for ACPI debug prints.
TEST= Build and boot soraka and fetch the ASL debug prints.
Change-Id: Ib31174701c56c88829ae0e725b546b66ea1ed16d
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/21513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Basic ACPI support for CNL on top of common ACPI, which will establish
a root of FADT table, fill MADT entry, create gnvs field, record wake
status and convert device names into DSDT dev definitions.
Change-Id: Ibc16d2afdd3cb9bad2ecb85cf320c88504409707
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/21076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch makes coreboot set VBSD_EC_EFS flag if CONFIG_VBOOT_EC_EFS
is set. Depthcharge/Vboot uses this flag to determine whether it can
update EC when it's already running a RW copy.
BUG=b:65028930
BRANCH=none
TEST=Verify soft sync runs successfully on Fizz.
Change-Id: Ic51ddd4819262162a8d8519461c4ace57ee01cb5
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/21489
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Updating from commit id 3f3a496a 2017-09-01 09:20:19
(image_signing: Fix loem.ini pattern for unibuilds)
to commit id 753e34e9 2017-08-31 10:12:40
(futility: Make rwsig sign command produce EC_RW image)
This brings in 5 new commits.
This also updates Depthcharge stable commit ID.
Updating from a843f262 2016-08-16 08:41:04
(kahlee: select emmc boot first if available)
to commit id f3bb31fe 2017-08-15 17:15:33
(vboot: Support EC early firmware selection)
This brings in 14 new commits.
Change-Id: I17d034e87fa642c5e30e933eb98bcfe5ceaaa3a8
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/21490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This board uses the reset defaults for DxxIP and DxxIR.
The datasheet "Intel ® I/O Controller Hub 10 (ICH10) Family"
mistakenly says in the D31IP register that all function have INTB as
default. This is however not true as documented in the reset default
value.
This fixes the DSDT such that the SMBus device gets a route for the
INT C interrupt it uses.
Change-Id: I3dd1308fb7acec86b90ecd9d2079cf9a58702c40
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21442
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TESTED: NGI works on VGA with adapter on DVI-I port
Change-Id: I4bd9d451295d26a3e11ded9863f5d45d42c8fead
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This makes the VGA output on the DVI-I connector usable.
This reuses vendor settings.
Change-Id: Ib8b6bf33816f7e468a09ff5e2008c2cb9f7c0a8b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
For boards with cimx/sb800, mainboards defined only empty
stubs. Reset functionality is handled as BiosCallout.
For amd/inagua, the defined function was actually initial
GPIO programming.
For cimx/sb700, function had prototypes but no callers.
For cimx/sb900, everything was commented out already.
Change-Id: I936feb4fc41d903078620c919a733bb9f39c3efb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Mariusz Szafranski