This code was only used by allwinner CPUs which is removed at this
point.
Change-Id: I31a2a502bffdc605cc31127723ed769b8665c314
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33170
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Allwinner code was never completed and lacks a driver to load
romstage from the bootblock.
Change-Id: If2bae9e28a6e1ed6bfe0e9cb022ca410918cc4db
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33133
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Allwinner code was never completed and lacks a driver to load
romstage from the bootblock.
Change-Id: I12e9d7213ce61ab757e9317a63299d5d82e69acb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33132
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kaby, Coffee and Whiskey Lake are all supported by the same code
path in libgfxinit.
TEST=Played Tint on clevo/kbl-u(n130bu).
Change-Id: Ic911bda3dd62c4d37a1b74a87fb51adc6c9d6ad4
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31464
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update libgfxinit:
o Add support for ULX (CPU Y series) variants
o Add support for Kaby/Coffee/Whiskey/Amber Lakes
o Publish Read_EDID() procedure
o Fix certain GMBUS error conditions
o Fix DP training when clock recovery needed voltage-swing increase
o Fix scaling on eDP for BDW+
Change-Id: Ib252303708d2bb0524ecc47f498df45902ba774f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested on SiFive/unleashed:
Boots into Linux until earlycon terminates.
Change-Id: I35abacc16f244b95f9fd1947d1a5ea10c4dee097
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34142
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This implementation revises the UART PCI device reference in common
UART driver. The SOC functions have been aligned to provide the UART
PCI device reference using pcidev_path_on_root.
The uart_get_device() return type is changed, and files in which
it gets used are updated.
Change-Id: Ie0fe5991f3b0b9c596c3de9472e98e4091d7dd87
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Commit 509f469 [drivers/fsp1_1/raminit.c: Always check FSP HOBs]
inadvertently made use of the mrc_hob conditional on
CONFIG_DISPLAY_HOBS, when there is no relation between the two,
leading to MRC cache data being corrupted. On some devices this
caused RAM training to be redone, on others it resulted in a
bricked device.
Fix this by removing the condition on CONFIG_DISPLAY_HOBS.
Test: boot google/{cyan,edgar}, observe third boot and onward do not
brick device, properly use mrc_hob via cbmem console and timestamps.
Change-Id: I01f6d1d6dfd10297b30de638301c5e0b6545da9c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34685
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The cache is at the end of TSEG. As SMM_RESERVED_SIZE was
half of TSEG size, offseting from the start gave same
position.
Change-Id: I2d5df90b40ff7cd9fde3cbe3cc5090aac74825f7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Let garbage-collection take care of stage_cache_external_region()
when it is not needed and move implementation to a suitable file
already building for needed stages.
Change-Id: Ic32adcc62c7ee21bf38e2e4e5ece00524871b091
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Let garbage-collection take care of stage_cache_external_region()
when it is not needed and move implementation to a suitable file
already building for needed stages.
Change-Id: Ia6adcc0c8bf6d4abc095ac669aaae876b33ed0f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34669
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Let garbage-collection take care of stage_cache_external_region()
if it is no needed and move implementation to a suitable file already
building for needed stages.
Remove aliasing CONFIG_RESERVED_SMM_SIZE as RESERVED_SMM_SIZE.
Change-Id: Ie6fcc40fba14575e8ee058f45a1a359a05f00aca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
droid/blorb needs to use different SAR values than bobba. Use sku-id to load the SAR values.
BUG=b:138091179
BRANCH=octopus
TEST=build and verify SAR load by sku-id
Change-Id: I71b5d69ffbba82018a682202df73b604332dd9e7
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34542
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FreeBSD doesn't have ENODATA defined, so the cbootimage utility wouldn't
build. It looks like the BSDs use ENOATTR in the same fashion, so
update the error to use that.
Change-Id: Ic70710d5726476755585fd1a3ae3f256a430e8df
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/28365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
smbios.h had already declared smbios_mainboard_enclosure_type so this
change defines it. It can be overridden in a mainboard so the enclosure
type can be set at runtime.
We have a mainboard that will be used in different enclosures and we are
planning on using a single BIOS image for all of the enclosures so it
will need to be set dynamically based on sku.
BUG=b:138745917
TEST=Built arcada firmware and verified via dmidecode that enclosure type
is correctly set to "Convertible", then temporarily added a
smbios_mainboard_enclosure_type to arcadas board file returning
0x20 and verified with dmidecode that the enclosure type is
"Detachable"
Change-Id: Iba6e582640989f5cb7e6613813e7b033760a977c
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested on qemu-riscv:
Boots into Linux until initrd should be loaded.
Change-Id: I4aa307c91d37703ad16643e7f8eb7925dede71a8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Call OpenSBI in M-Mode and use it to set up SBI and to lockdown the
platform. It will also jump to the specified payload when done.
This behaviour is similar to BL31 on aarch31.
The payload is 41KiB in size on qemu.
Tested on qemu-riscv:
Required to boot a kernel as OpenSBI's instruction emulation feature
is required on that virtual machine.
Tested on SiFive/unleashed:
The earlycon is working. No console after regular serial driver
should take over, which might be related to kernel config.
Change-Id: I2a178595bd2aa2e1f114cbc69e8eadd46955b54d
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The abuild script will `cd` into the build directory. FAILED_BOARDS
defaults to a relative path, so it ends up trying to echo into a
directory that doesn't exist.
If we set the realpath to the file then we can correctly update the
failed/passed boards file.
BUG=none
TEST=make what-jenkins-does and verified there was a failed_boards and
passed_boards in coreboot-builds.
Change-Id: Ib3af003b090668380a9425583a9f4367023820a6
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BRANCH=none
BUG=b:138152075
TEST=Build for cometlake board with the PmTimerDisabled policy in
devicetree set to 1.
With PmTimerDisabled = 0
>> iotools mmio_read8 0xfe0018fc
0x00
With PmTimerDisabled = 1
>> iotools mmio_read8 0xfe0018fc
0x02
Bit 1: ACPI Timer Disable (ACPI_TIM_DIS): This bit determines
whether the ACPI Timer is enabled to run.
- 0: ACPI Timer is enabled
- 1: ACPI Timer is disabled
Change-Id: I83f49505a804c99d7978e5d541ea9fe8ead9b88f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Caller needs to take into account that bus numbers may
have not been assigned yet. Same issue existed before
with early ramstage and mostly does not cause problems
when used with static devices on bus 0.
Change-Id: I4865b4277dbc858c8c2ffd2052defcaa1a92173c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34614
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Constify the struct device arguments in below APIs:
> acpi_device_name
> acpi_device_path_fill
> acpi_device_path
> acpi_write_dbg2_pci_uart
> acpi_device_scope
> acpi_device_path_join
The APIs do not seem to modify the argument and are using
device argument as reference to device only.
Change-Id: Ic2ce045f17efa288eb41503795723d0ad5ec78bd
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34625
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add rise time / fall time to I2C config in device tree to ensure I2C
CLK runs accurately at I2C_SPEED_FAST (400 kHz).
BUG=b:138258384
BRANCH=none
TEST=probe I2C0/I2C2/I2C3 SCL on Kohaku board, verify all of them run
at 395-399 kHz.
Change-Id: Id98079e717f0db3fdcb88f85e45693925d11d7fd
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34559
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function can capture and allocate its own eye data, so in that case
set need_free to true so it is freed at the end.
Change-Id: I63ca6d743e6610d3e3ab6bd7b0356aabdfa6f784
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393969
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Accessing the higher vidtcon variables using pointer arithmetic from the
lower address FIMD_CTRL struct is undefined behaviour, since pointers
manipulations are not allowed outside the objects they point to. The
standard-blessed way is to perform the arithmetic using integer
addresses first, and then convert that to a pointer. The end result is
the same, but avoids the risk of unsafe optimizations from an
over-zealous compiler.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402096, 1402124, 1402131, 1402169
Change-Id: I13ed23836e8e9076ae0bfd88c05c4f2badac9c49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
John Lewis has updated his homepage to indicate he is no longer
producing coreboot images, nor supporting existing ones, so
remove the entry from the list.
Change-Id: I9b07cc4cb4adeb36eff1f904b23fb25da2c89c68
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Refactor I2C code which will be reused among similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot
Change-Id: I407d5e2a9eb29562b40bb300e39f206a94afe76c
Signed-off-by: qii wang <qii.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Clear the GPI Interrupt Status & Enable registers to prevent any
interrupt storms due to GPI.
BUG=b:138282962
TEST=Ensure that the Interrupt status & enable registers are reset
during the boot-up when the system is brought out of G3, S5 & S3. Ensure
that the system boots fine to ChromeOS.
Change-Id: I2185355d0095601e0778b6bf47ae137cc53e4051
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Moving these to bootblock as we are seeing some instances where
devices are rebooting into the recovery broken screen with the 0x5a error (no
bootable storage device in system). This needed to be done for KBL
platforms and never got transferred to hatch.
Please reference https://review.coreboot.org/c/coreboot/+/23647
BUG=b:137681648
BRANCH=None
TEST=Run autotest faft_bios and faft_ec suites
Change-Id: I8cf09c26d77d890f5d0490709504e9edf485a93f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34484
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ...
- adds the PCH ID for C232 chipset,
- renames "Premium" chipset to "HM170" (because of same IDs),
- reorders the Skylake-H PCH IDs ascending by hex values.
Used documents:
- Intel 332690-005EN
Change-Id: I859975fe7bcd3c10dead8fe150a2fbead9c64a51
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add the Command Response Buffer which is defined in the TPM 2.0 Specs.
CRB can be specified with MAINBOARD_HAS_CRB_TPM, even though it is
actually SoC/SB specific.
Change-Id: I477e45963fe3cdbc02cda9ae99c19142747e4b46
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Add function which checks if Intel Platform Trust Technology / Intel
integrated TPM is enabled/active.
Change-Id: If93bb5e1a3a59b5045f4e44359683876fb387a71
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34380
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new bootmem memory type OpenSBI.
It's similar to BL31 on aarch64.
Required for OpenSBI integration.
Change-Id: I5ceafd5a295f4284e99e12f7ea2aa4c6d1dbb188
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Stoney Ridge is family 15h models 70h-7Fh, Merlin Falcon is family 15h models
60h-6Fh. Add changes based on config parameter SOC_AMD_MERLINFALCON to make
the code backward compatible with Merlin Falcon.
BUG=none.
TEST=Tested later with padmelon board.
Change-Id: I00fe832324500bcb07fca292a0a55f7258a2d82f
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33624
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The initial implementation was assigning the devfn as PCI device
reference directly which was incorrect.
Change-Id: Iad57e9bc6b2acf1823ee38116aea8a93feece6f9
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
It's better to format lists with bullet points.
Change-Id: I503ef2dea9146d67c220236b8a5b64c2ba2d794f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34504
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Nico Huber