To avoid trampling over interesting exception artifacts on the real
stack, our arm64 systems switch to a separate exception stack when
entering an exception handler. We don't want that to use up too much
SRAM so we just set it to 512 bytes. I mean it just prints a bunch of
registers, how much stack could it need, right?
Quite a bit it turns out. The whole vtxprintf() call stack goes pretty
deep, and aarch64 generally seems to be very generous with stack space.
Just the varargs handling seems to require 128 bytes for some reason,
and the other stuff adds up too. In the end the current implementation
takes 1008 bytes, so bump the exception stack size to 2K to make sure it
fits.
Change-Id: I910be4c5f6b29fae35eb53929c733a1bd4585377
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Arm CPUs have always had an odd feature that allows you to mask not only
true interrupts, but also "external aborts" (memory bus errors from
outside the CPU). CPUs usually have all of these masked after reset,
which we quickly learned was a bad idea back when bringing up the first
arm32 systems in coreboot. Masking external aborts means that if any of
your firmware code does an illegal memory access, you will only see it
once the kernel comes up and unmasks the abort (not when it happens).
Therefore, we always unmask everything in early bootblock assembly code.
When arm64 came around, it had very similar masking bits and we did the
same there, thinking the issue resolved. Unfortunately Arm, in their
ceaseless struggle for more complexity, decided that having a single bit
to control this masking behavior is no longer enough: on AArch64, in
addition to the PSTATE.DAIF bits that are analogous to arm32's CPSR,
there are additional bits in SCR_EL3 that can override the PSTATE
setting for some but not all cases (makes perfect sense, I know...).
When aborts are unmasked in PSTATE, but SCR.EA is not set, then
synchronous external aborts will cause an exception while asynchronous
external aborts will not. It turns out we never intialize SCR in
coreboot and on RK3399 it comes up with all zeroes (even the reserved-1
bits, which is super weird). If you get an asynchronous external abort
in coreboot it will silently hide in the CPU until BL31 enables SCR.EA
before it has its own console handlers registered and silently hangs.
This patch resolves the issue by also initializing SCR to a known good
state early in the bootblock. It also cleans up some bit defintions and
slightly reworks the DAIF unmasking... it doesn't actually make that
much sense to unmask anything before our console and exception handlers
are up. The new code will mask everything until the exception handler is
installed and then unmask it, so that if there was a super early
external abort we could still see it. (Of course there are still dozens
of other processor exceptions that could happen which we have no way to
mask.)
Change-Id: I5266481a7aaf0b72aca8988accb671d92739af6f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This includes USB QUSB2,QMP Phy and Controller support
And libpayload support for USB
Change-Id: I0651fc28dc227efbeb23eeefe9b96a3b940ae995
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This implements the SPI-NOR driver for the Qualcomm QSPI core.
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/27483/58
Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35501
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCH uses the SRCCLKREQ# pin to detect PCIe device in the slot in
order to send clock signal to it. However, this logic is not required
for the Realtek LAN device, since this chip is soldered to the board
and always uses clocking. The chipset can't receive the clock request
signal (most likely this pin isn't connected) and doesn't enable the
CLK. For this reason, the device is broken during the initialization
phase. The patch disables clock request logic for the PCH PCIe port 6
to initialize the onboard LAN device correctly.
Change-Id: I5cbce6177c89052eb50959f43903b6f8a607e77f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36377
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for clock driver for SC7180
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/31083/6
Change-Id: I3f39252c887c36e8af43bc49289795000e4638d8
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
TEST=boot PC Engines apu1 with C bootblock patch and launch
Debian with Linux kernel 4.14.50
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie81198f5034a84d319ee7143aa032433f82be254
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37329
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch changes all existing instances of clrsetbits_leXX() to the
new endian-independent clrsetbitsXX(), after double-checking that
they're all in SoC-specific code operating on CPU registers and not
actually trying to make an endian conversion.
This patch was created by running
sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g'
across the codebase and cleaning up formatting a bit.
Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This patch removes the recently added update8/16/32/64() API and
replaces it with clrsetbits8/16/32/64(). This is more in line with the
existing endian-specific clrsetbits_le16/32/64() functions that have
been used for this task on some platforms already. Rename clrsetbits_8()
to clrsetbits8() to be in line with the new naming.
Keep this stuff in <device/mmio.h> and get rid of <mmio.h> again because
having both is confusing and we seem to have been standardizing on
<device/mmio.h> as the standard arch-independent header that all
platforms should include already.
Also sync libpayload back up with what we have in coreboot. (I'm the
original author of the clrsetbits_le32-definitions so I'm relicensing
them to BSD here.)
Change-Id: Ie4f7b9fdbdf9e8c0174427b4288f79006d56978b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37432
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create new variant for Lick that is copied from phaser variant.
Remove unnecessary code, due to not support touchscreen and stylus.
Set to default_override_table.
Remove variant.c.
BUG=b:145181137
BRANCH=octopus
TEST=./util/abuild/abuild -p none -t google/octopus -x -a
Change-Id: If732d94194defb9f5ee9c847ee93dd58aef01174
Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37247
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All serial I2C bus frequencies should not be over 400KHz in kohaku,
but the measurement showed frequencies of I2C1 and I2C4 were over
400KHz. (b:144885961)
This change adjusts I2C speed settings to limit that frequencies to
400KHz.
The new setting values have been from other projects using same I2C
components, and verified I2C1 and I2C4 frequencies < 400MHz internally.
BUG=b:144885961
BRANCH=firmware-hatch-12672.B
TEST=Verified I2C1 and I2C4 frequency not over 400KHz
Change-Id: I9614fb39b6e55cb2ce1b0879a9f5204e55002f8d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Make some room for C environment bootblock. The S3 resume
feature needs less than 2 KiB.
Change-Id: Ic49c313d492f1d18f59d61e84f81f106e3b41fb1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Move the stoneyridge implementation of get/set AP entry to the common
block.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9c73940ffe5f735dcd844911361355c384f617b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
All AMD CPU families supported in coreboot have BIOSRAM space. Looking at
the source code, every family could have the same API to save and restore
cbmem top or UMA base and size.
Unify BIOSRAM layout and add implementation for cbmem top and UMA storing.
Also replace the existing implementation of cbmem top and UMA with the
BIOSRAM access.
TEST=boot PC Engines apu1 and apu2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I69a03e4f01d7fb2ffc9f8b5af73d7e4e7ec027da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37402
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to BKDGs for families 15h 60-6fh or newer and families 16h the
ACPI MMIO decode enable bit is the second LSB, not the first LSB.
Additionally create another enable function for older families where
the register and bit is different.
It does not seem to impact any current board, but may be crucial for
incoming C bootblock implementations when this bit will need to be set
very early. Most likely this bit is set by AGESA right now.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iaa31abc3dbdf77d8513fa83c7415b9a1b7fd266f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37178
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix regression with commit 5639736
binaryPI: Drop CAR teardown without POSTCAR_STAGE
Occassionally (maybe 1 boot in 10) SMP lapic_cpu_init() fails
with following errors in the logs of pcengines/apu2:
CPU 0x03 would not start!
CPU 0x03 did not initialize!
The CPU number is sometimes 0x02, never seen 0x01. Work-around also
suggests something to do with cache coherency and MTRRs that is really
at fault.
As a work-around return the BSP CAR teardown to use wbinvd instead
of invd. These platforms do not support S3 resume so this is the
easy work-around for the time being.
Change-Id: I3dac8785aaf4af5c7c105ec9dd0b95156b7cca21
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
&imd_cbmem is never NULL, so remove that path
Change-Id: Ib9a9c88d6cd4842df447f046bc0abaa7ef5032c7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
BUG=b:144002424
TEST=Ensured no TPM time out issue and system can boot to OS
Change-Id: I7282e6c2d9627846039638bdc0db3ee7ebba5f12
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch performs below operations:
1. Rename soc_fill_gpio_pm_configuration to soc_gpio_pm_configuration
2. Move soc_gpio_pm_configuration() to gpio_common.c
3. Calling from bootblock and after FSP-S to ensure GPIO PM configuration
is updated with devicetree.cb value even with platform reset.
BUG=b:144002424
TEST=coreboot configures all MISCCFG.bit 0-5 local clock gating based on devicetree.cb
Change-Id: I54061d556d62462d9012bc47bb9f3604a3e5a250
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Remove default path/to/file strings when USE_AMD_BLOBS is not enabled.
This will result in a buildable, but not runable image, in the default
configuration.
Drop the check for HAVE_MERLINFALCON_BINARIES in the path default.
A later patch will address the poor use of this symbol
All PSP blobs are still assumed to be in the same directory as the AMD
public key. Qualify building the amdfw.rom intermediate image and
including it into coreboot.rom on whether the public key remains "".
This change infers it's OK to skip xHCI and GEC firmware too, although
the images normally reside in a separate directory.
This change only determines whether default paths and names exist.
Paths will be updated in a follow-on patch.
Change-Id: Ic21fbd7a58b340a9bcaaea456e1f38b567215b81
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37220
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is access to BIOSRAM region in ACPIMMIO. While we use the
region, we do not use these functions.
Change-Id: I39d1ae811cfe23595587ae0fe51c6549ecbaba6c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Enable ACPI methods to control privacy screen on Drallion devices.
Drallion devices may not have a privacy screen and it is up to the
EC to determine if the privacy screen is present on the system.
BUG=b:142656363
TEST=emerge-drallion coreboot chromeos-bootimage
Change-Id: I79d02bb1b25f0deb49ae4bb852b7ed8c21fd31c7
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36045
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ACPI methods to the Wilco EC for controlling a privacy screen
on the device.
BUG=b:142237145, b:142656363
TEST=none
Change-Id: Ic3c136f9d2de90eeb3c9e468e4c7430ccf6dcc42
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36044
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add gfx.asl file for cannonlake SOCs to allow for graphics-related ACPI
devices and methods on cannonlake devices.
BUG=b:142237145
TEST=gfx.asl added to drallion dsdt.asl
Change-Id: I38a26f3135d571e2f9b63840d38fd4d3476fc142
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This change allows for Intel graphics devices to use drivers/generic/gfx
driver to populate ACPI SSDT table for common graphics related devices
and methods.
BUG=b:142237145
TEST=On sarien_cml add generic/gfx to the devicetree and device is
enumerated and correct SSDT ASL is observed.
Change-Id: Ibc86a88687ac860ebef19a4b68af64fd50d12b8e
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Since struct vb2_shared_data already contains workbuf_size and
vboot_workbuf_size is never used in depthcharge, remove it from struct
sysinfo_t. In addition, remove lb_vboot_workbuf() and add
CBMEM_ID_VBOOT_WORKBUF pointer to coreboot table with
add_cbmem_pointers(). Parsing of coreboot table in libpayload is
modified accordingly.
BRANCH=none
BUG=chromium:1021452
TEST=emerge-nami coreboot libpayload depthcharge; Akali booted correctly
Change-Id: I890df3ff93fa44ed6d3f9ad05f9c6e49780a8ecb
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
After CB:36808, CB:36844 and CB:36845, all fields except buffer_offset
were removed from struct vboot_working_data. Since buffer_offset is used
to record the offset of the workbuf relative to the whole structure, it
is no longer needed.
This patch removes the structure, and renames vboot_get_working_data()
to vboot_get_workbuf().
BRANCH=none
BUG=chromium:1021452
TEST=emerge-nami coreboot
Change-Id: I304a5e4236f13b1aecd64b88ca5c8fbc1526e592
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Drop the redundant cimx_util, remove the includes when appropriate and
replace the implementation with amdblocks/acpimmio where needed.
TEST=boot PC Engines apu1 and launch Debian with Linux kernel 4.14.50
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I66b1f82926372b6ebb570893b6eb73c7f2935b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Julius Werner