board porter: printk should always be available in CAR mode.
Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board
but it's not been used there. Very odd.
There is one usage of CONFIG_USE_INIT which was always off in
src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with
those few lines.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- make SMM relocation debugging Kconfig accessible
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5676 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
108 src/arch/i386/include/arch/acpi.h:402:5: warning: "CONFIG_HAVE_ACPI_SLIC" is not defined
1 src/mainboard/getac/p470/mainboard.c:83: warning: assignment discards qualifiers from pointer target type
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5614 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Move the 'USE CMOS' question from the top level to the
General Setup section of Kconfig.
Signed-off-by: Joe Korty <joe.Korty@ccur.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5573 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
legacy software to recognize it as IDE and boot from it. I think
this should be the default for two Tyan boards (k8s aka s2882 and s2881).
Rename the directory to sil prefix to match the Linux kernel naming.
(And I think it was a SiliconSystems wish to be named sil ;)
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5560 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
while others dislike them being extra commits, let's clean them up once and
for all for the existing code. If it's ugly, let it only be ugly once :-)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5480 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- set them to span the last 64k, instead of the last 128k
by default
- fixes via CAR for tiny bootblock
- enabled tiny bootblock for via/vt8454c
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5409 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Guard the code with CONFIG_EXPERT to remove warnings.
Make it only show up for fam10, since it isn't implemented for K8 yet.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5379 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
makes include/console/console.h and console/console.c usable both in
__PRE_RAM__ and coreboot_ram stages.
While debugging this, I removed an indirection from the e7520 ram init code
(same as we did on a couple of other chipsets, removes some register pressure
from romcc)
Also, drop remainders of CONFIG_USE_INIT (except the one odd piece of dead code
in cache_as_ram.inc)
Then some ap_romstage.c fixes, at least the nvidia/l1_2pvv compiled for me with
CONFIG_AP_CODE_IN_CAR set in Kconfig which it did not before.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
the information is already specified in cmos.layout. coreboot is changed
to use that version instead.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmai.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5313 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
restriction that tells Kconfig not to allow that setup.
It's not particularily useful, as scan-build totally dominates
the gcc runtime, but well..
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5305 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5297 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5216 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
so it's clear that they should be gone.
More can (and should) be added, but this is a start.
Of course, eliminating the uses of the flags (and then
the flags themselves) that are in Kconfig.deprecated_options
is a noble task for the future :-)
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5209 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
When configured in Kconfig, just running "make"
calls scan-build as appropriate (however, it does not
check for the presence of scan-build)
The target directory for the scan-build report is configurable
and defaults to the scan-build default of /tmp/scan-build-$date-$num
abuild is adapted to properly run scanbuild when ran
with the -sb option.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5208 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5206 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Convert all DEBUG_SMBUS, DEBUG_SMI, and DEBUG_RAM_SETUP custom and
local #defines into globally configurable kconfig options (and Options.lb
options for as long as newconfig still exists) which can be enabled
by the user in the "Debugging" menu.
The respective menu items only appear if a board is selected where the
chipset code actually provides such additional DEBUG output.
All three variables default to 0 / off for now.
Also, drop a small chunk of dead/useless code in the
src/northbridge/via/cn700/raminit.c file, which would otherwise break
compilation.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reworked to still apply to trunk, added X86EMU_DEBUG (and make the x86emu/yabel
code only work printf instead of a redefined version of printk and
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Fix whitespace, alignment, and indentation in a few places.
- Some more consistency fixes in license headers.
- Fix incomplete license header: src/mainboard/msi/ms9652_fam10/devicetree.cb.
- Fix typo for LIMIT_HT_SPEED_1800: s/1.6GHz/1.8GHz/.
- Fix typo in src/mainboard/msi/ms9652_fam10/Kconfig: s/MS-9256/MS-9252/.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5182 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
less than optimal PCB designs can still work reliably
with reduced clock.
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5179 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is needed on the IP1000T to get VGA output. The VGA option rom will ask
through an SMI for hardware specifics (in form of a VBT, video bios table)
which the SMI handler copies into the VGA option rom.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5177 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This should eventually go, as fadt seems to be better
put into the southbridge
- Add config flag for boards that have get_bus_conf.c
Might be cleaned out as well, no idea
- Use flags where appropriate.
- Move the following rules to src/arch/i386/Makefile.inc:
- fadt.o
- dsdt.o
- acpi_tables.o
- get_bus_conf.o
- Rename objs_dsl_template in toplevel Makefile to the more
appropriate objs_asl_template
- Remove all Makefiles that are empty now, which includes
src/mainboard/Makefile.k8_CAR.inc and
src/mainboard/Makefile.k8_ck804.inc
and the include statements that used these files.
- Add workaround to intel/xe7501devkit:
It uses ACPI in an unusual way: It adds a MADT, but no
DSDT. As this is highly unusual, I didn't want to add
explicit support for that scenario (and encourage such
uses that way), and added a dummy dsdt.asl instead. It
will be linked to dsdt.o, but not linked into the final
binary.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5171 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- introduce BOARD_HAS_HARD_RESET and use it if a board provides
hard_reset in $(MAINBOARDDIR)/reset.c, instead of some chipset component
- move a couple of rules out of the mainboards' Makefiles into
src/arch/i386/Makefile.inc:
initobj-y += crt0.o
obj-y += mainboard.o
obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o
obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o
obj-$(CONFIG_BOARD_HAS_HARD_RESET) += reset.o
- remove Makefile.incs that are empty (or comment-only) after these
changes, incl. Makefile.romccboard.inc (and references to it)
- Make include not fail if Makefile.inc doesn't exist.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5168 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
default.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5160 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
helloWorld/romstage, ...).
It defaults to fallback/, so there's no user visible change now.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5102 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Clarified with the authors
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Harald Gutmann <harald.gutmann@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5044 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
anymore so this ugly hack is no longer needed.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5040 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
(defaults to UDELAY_IO again, like newconfig)
- Use UDELAY_TSC on Via C7 [kconfig]
- Support Tinybootblock on Intel CPUs
- set XIP location correctly for Tinybootblock on Intel
- provide correct XIP location in Tinybootblock configuration
- Make kontron/986lcd-m use Tinybootblock
- Some kconfig fixes to kontron/986lcd-m [kconfig]
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4997 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
which is normally set to 0x10 (the current default) and set to 0x80 (the current alternative)
where necessary (if romstraps get in the way).
For Kconfig, the special case is set per southbridge (as these define the necessity for this
workaround), for newconfig it's added to each single board.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Remove all remaining warnings from qemu.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4939 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Robert Millan <rmh.grub@aybabtu.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4930 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Of course, the user can still override those defaults, if needed.
Add defaults for VIA pc2500e, Kontron 986LCD-M/mITX, MSI MS-6178.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4884 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
VIDEO_MB is a variable that defines how many MB of RAM will be used
for onboard graphics frame buffer. It's northbridge-dependent which
values for CONFIG_MB are valid (but not board-dependent).
This patch adds choices for menuconfig to select the VIDEO_MB value for:
- Intel 82810
- Intel 82830
- VIA CN400
- VIA CN700
Note: CN400 and CN700 are based on the CX700 datasheet, not sure if they're
correct. If somebody has CN400 and CN700 datasheets, please verify.
We drop all per-board VIDEO_MB variables in per-board Kconfig files as
there's a northbridge-specific option/default now (plus the user can override
the value if needed in menuconfig).
As CONFIG_MB is chipset-specific but not board-specific (and never was), filter
it in util/compareboard/compareboard, we don't need to match those values.
Finally, put "CPU", "Northbridge", "Southbridge", "Super I/O", and
"Devices" sections into the "Chipset" menu, where NB-specific
options will appear if you select a board using a certain NB,
SB-specific options would appear in the "Southbridge" section etc.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4866 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Do kbuildall then grep not.defined kbuildall.results/*
The interesting ones were GENERATE_* I had to put them in twice to make it work
correctly: once outside the menu setting the defaults, and once inside the menu.
Now they show up when they should, and are always defined
Define HAVE_INIT_TIMER to only exclude the three boards that define it to be 0
in newconfig.
Define MEM_TRAIN_SEQ to be an integer and set it correctly.
Remove CAR_FAM10 and just depend on NORTHBRIDGE_AMD_AMDFAM10
MOVNTI is a performance enhancement, and should default to 0 so it doesn't break
boards that forget to define it.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4856 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
selected in sockets, and they aren't used yet.
Add a couple of variables to src/Kconfig for lack of a better place so that
their selects work.
Add select statements according to newconfig for some variables that were
defined but never selected in mainboard configs.
Fix #if CONFIG_VGA==1 -> #if CONFIG_VGA.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4816 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
from beginners who should rather not touch them unless they know what
they do.
Also, add a random Kconfig help comment.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4808 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to build, but by default all the tables that are available are built.
Make PIRQ table build for qemu.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
for amd/socket_AM2R2, amd/socket_939, drivers/ati/ragexl
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4750 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Use "default n" for all components that shall be "select"ed.
- Use "0x0" instead of "0" for hex variables for clarity and to reduce
the risk of people passing integer instead of hex values to such variables.
- Add TODO comments for boards that have irq_tables.c but don' set
CONFIG_HAVE_PIRQ_TABLE = 1. Someone with the hardware should test enabling.
- ASUS M2V-MX SE doesn't have irq_tables.c so don't define
IRQ_SLOT_COUNT in its Kconfig file.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4749 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Add helps texts to multiple user-visible Kconfig options.
- Improve some menu and option names.
- PAYLOAD_NONE should come before PAYLOAD_ELF, so that you scroll down
(instead of up) when changing "no payload" to "ELF payload" (more
intuitive, IMHO).
- s/cbfs/cbfstool/.
- Add some TODO items where needed.
- Put GDB_STUB in a "Debugging" menu, no options should be top-level.
There'll be more debug options later, I'm pretty sure.
- Start converting help texts which are not user-visible to #-comments.
- Re-order some options for more intuitive menus.
- Set ARCH_X86 and ARCH_POWERPC to "default n", each boards selects them.
- "Maximum reboot count" should proabably not be user-selectable, or at
most if CONFIG_EXPERT (yet to be added) is enabled. It does definately
not need its own "Misc options" menu.
- Set PCI_ROM_RUN and VGA_ROM_RUN to "default y", most users will want to
run option ROMs.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4734 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
complete set of variables now, though they might still have
the wrong values.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on QEMU.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4726 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
boards to global. It's not a per-board value, but
compatibility stuff.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4714 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- CONFIG_CBFS
- anything that's conditional on CONFIG_CBFS == 0
- files that were only included for CONFIG_CBFS == 0
In particular:
- elfboot
- stream boot code
- mini-filo and filesystems (depends on stream boot code)
After this commit, there is no way to build an image that is not using
CBFS anymore.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also enable building individual boards with kbuildall for
debugging.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4666 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
src/cpu/amd/socket_F/Kconfig: Remove second occurrence of CPU_SOCKET_TYPE.
src/mainboard/amd/serengeti_cheetah/Kconfig: Add HT_CHAIN_UNITID_BASE here, since it is board specific.
src/mainboard/tyan/s289X/Kconfig: Fix typo and change APIC_ID_OFFSET to match old config.
src/devices/Kconfig: Change default value of *_PLUGIN_SUPPORT to match old config.
src/southbridge/amd/amd8131/Makefile.inc: Remove check since it was a typo, and the correct variable is checked in the parent directory.
src/Makefile:Use devicetree.cb instead of Config.lb to generate static.c.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4657 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Kconfig_bools.diff: Change some more ints to bools, change some default values.
xip_size.diff: Make XIP_SIZE + XIP_BASE add up to 4GB.
smp.diff: set CONFIG_SMP based on MAX_CPUS.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4655 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Remove dependency on PAYLOAD_ELF so that config items are shown.
Build tested. With this, coreboot.rom has a VGA BIOS optionrom added.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4642 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
is the correct choice. Avoids type problems in kconfig
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4580 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Whitespace fixes, remove trailing whitespace, use TABs for identation
(except in Kconfig "help" lines, which start with one TAB and two spaces
as per Linux kernel style)
- Kconfig: Standardize on 'bool' (not 'boolean').
- s/lar/cbfs/ in one Kconfig help string.
- Reword various Kconfig menu entries for a more usable and consistent menu.
- Fix incorrect comment of NO_RUN in devices/Kconfig.
- superio/serverengines/Kconfig: Incorrect config name.
- superio/Makefile.inc: s/serverengine/serverengines/.
- superio/intel/Kconfig: s/SUPERIO_FINTEK_I3100/SUPERIO_INTEL_I3100/.
- mainboard/via/vt8454c/Kconfig: Fix copy-paste error in help string.
- mainboard/via/epia-n/Kconfig: Fix "bool" menu text.
- console/Kconfig: Don't mention defaults in the menu string, kconfig
already displays them anyway.
- Kill "Drivers" menu for now, it only confuses users as long as it's emtpy.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Works on Kontron, qemu, and serengeti.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
tested on abuild only.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Stefan Reinauer