Certain chipsets/SoCs like Apollo Lake use GEN_PMCON_B for periodic SMI
rate selection unlike other chipsets which use GEN_PMCON_A. Select
PERIODIC_SMI_RATE_SELECTION_IN_GEN_PMCON_B to indicate the register
difference.
Based on Apollo Lake datasheet Vol. 3 Revision 005:
https://cdrdv2.intel.com/v1/dl/getContent/334819
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If182e1285ad6bd3f7c54760440010c50f57f7013
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72072
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Certain chipsets/SoCs like Apollo Lake use GEN_PMCON_B for periodic SMI
rate selection unlike other chipsets which use GEN_PMCON_A. Introduce new Kconfig option PERIODIC_SMI_RATE_SELECTION_IN_GEN_PMCON_B to
indicate the register difference.
Based on Apollo Lake datasheet Vol. 3 Revision 005:
https://cdrdv2.intel.com/v1/dl/getContent/334819
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I11241836ecc9066d323977b030686567c87ed256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
This makes sure that the resource allocator won't use this address range
for anything else. In the systems I looked at, this was between the end
of the above 4GB memory and the beginning of the above 4GB PCI BAR MMIO
region, but better reserve it here so nothing else will get allocated
there if this expectation isn't met.
TEST=Reserved region is printed in the console logs:
update_constraints: PCI: 00:00.0 09 base fd00000000 limit fdffffffff mem (fixed)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5a8150873cb019ca1d903ed269e18d6f9fabb871
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
It's been decided not to use the USB 3.0 port 1 on this board anymore,
so disable it also with the corresponding USB 2.0 lane.
BUG=none
TEST=USB 3.0 port 1 not functional anymore after boot, while others
continue working.
Change-Id: I2799e3d9d7232743c9480dd9611d94ed3249f53b
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch reduces the redundant config check to understand if an ISH FW
partition is available and to fetch the ISH FW version.
The goal is to fetch the ISH FW version if the ISH FW belongs to the CSE
firmware partition table.
Change-Id: I689a71377e7aea0fa3bc1835f355708c33c2caea
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75811
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames `SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` config
to `SOC_INTEL_STORE_ISH_FW_VERSION` to ensure the usage of this config
is clear.
Any platform would like to fetch the currently running ISH firmware
version should select this configuration.
TEST=Able to build and boot google/marasov.
Change-Id: Ie503d6a5bf5bd0d3d561355b592e75b22c910bf5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75767
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Boxy audio codec chip uses ALC5682I-VD, not ALC5682I-VS.
It needs to modify codec HID to "10EC5682" in coreboot to fix audio no
output sound issue.
BUG=b:286970886
BRANCH=dedede
TEST=confirm audio soundcard can be list by command "aplay -l"
Change-Id: Icd69a9d757ba817b586a703a17375682db684224
Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
This patch enables adding variant specific ASL code
TEST=Kernel driver is able to communicate with device
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I231482d56dd4afa150766c07cfde105158e5e124
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Add driver to support ELAN touchscreen using SPI for rex
* See "HID Over SPI Protocol Specification" section 5.2 - ACPI enum
* https://www.microsoft.com/en-us/download/details.aspx?id=103325
BUG=b:278783755
TEST=Kernel driver is able to communicate with device. Also tested
S0ix, ran 'suspend_stress_test -c 1' - no issues in suspend/resume.
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Id51d385ce350cef23da4184b044c74569f4dd3f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74885
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Update all the required sources to lay the ground work to enable PSP
verstage.
BUG=b:284984667
TEST=Build Myst BIOS image with PSP verstage enabled.
Change-Id: I6fbb1f835ac2ad6ff47f843321e1bd380af7ce33
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75584
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Alder Lake-S 2+0 SKUs and 35W SKUs have 20A GT TDC, all other Alder
Lake-S SKUs have GT TDC of 22A.
Based on the default settings of ADL-S FSP.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie6851d322fc9354d019a76503c3d35b5e6eca48b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
In soc/amd this function is unused so drop it and rename
_acpi_fill_ivrs_ioapic().
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic403fd84cb9cd5805fbc6f0c5a64cefbf4b0cd81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
By adding all DXIO IOAPIC with the same resource index, the IVRS code
can always pick that resource which simplifies the code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I10345e2337dcb709c2c1a8e57a1b7dd9c04adb9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Sometimes systems don't boot to the OS due to wrong ACPI tables.
Printing the tables in an ACPICA compatible format makes analysis of
ACPI tables easier.
The ACPICA format (acpidump, acpixtract) is the following:
"
FACS @ 0x0000000000000000
0000: 46 41 43 53 40 00 00 00 E8 24 00 00 00 00 00 00 FACS@....$......
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
"
To achieve analyze ACPI tables capture the coreboot log between
"Printing ACPI in ACPICA compatible table" and "Done printing ACPI in
ACPICA compatible table". Remove the prefix "[SPEW ] " and then call
'acpixtract -a dump' to extract all the tables. Then use 'iasl -d' on
the .dat files to decompile the tables.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7b5d879014563f7a2e1f70c45cf871ba72f142dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75677
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Time elapsed for a single board build with ccache typically measures
well below 10 seconds. Improve the measurements to milliseconds
resolution using bash EPOCHREALTIME (pseudo) environment variable.
Change-Id: Iaedc470bb45cf9bb6f14ff8b37cd6f7ae3818a08
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
One specific Hynix LPDDR5x DRAM part requires an ABL workaround to
eliminate DRAM-related failures during a FAFT test, but due to the
use of generic/common SPDs, there is no way for the ABL to determine
the DRAM part # itself.
Consequently, we will have coreboot check the DRAM part #, and set/clear
a CMOS bit as appropriate, which the ABL will check in order to apply
(or not apply) the workaround.
The ABL already uses byte 0xD of the extended CMOS ports 72/73 for
memory context related toggles, so we will use a spare bit there.
BUG=b:270499009, b:281614369, b:286338775
BRANCH=skyrim
TEST=run FAFT bios tests on frostflow, markarth, and whiterun without
any failures.
Change-Id: Ibb6e145f6cdba7270e0a322ef414bf1cb09c5eaa
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75698
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Add a Dockerfile for Alpine to build-test with musl-libc.
Change-Id: If90412146acc94f01a89cd681539aad48e92dd2e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
"current" points to the start of HEST table, so "next - current" already
includes the size of its header, no need for increment here. This issue
was found on SPR-SP platform. The length of HEST table is now correct
with this patch.
Change-Id: I6ff1e8e24612b7356772d582ff9a7e53863419db
Signed-off-by: Jeff Li <lijinfeng01@inspur.com>
Signed-off-by: Ziang Wang <ziang.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75738
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
On nissa, the ISH is running closed source firmware, so the ChromeOS
security requirements specify it must be behind an IOMMU. Add
DmaProperty to the ISH _DSD on joxer.
BUG=b:285477026
TEST=Kernel marks ISH (PCI device 12.0) as untrusted, and changes the
IOMMU group type to "DMA". Also, device still goes to S0i3.
Before:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
0
$ ls /sys/kernel/iommu_groups/5/devices
0000:00:12.0
0000:00:12.7
$ cat /sys/kernel/iommu_groups/5/type
DMA-FQ
After:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
1
$ ls /sys/kernel/iommu_groups/5/devices
0000:00:12.0
0000:00:12.7
$ cat /sys/kernel/iommu_groups/5/type
DMA
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I69b00f0281f4493db157783840d9cdcbb138017f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75758
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When fw_config is unprovisioned, devicetree will disable all probed
devices. However, boot-critical devices such as storage devices need to
be enabled.
As a temporary workaround while adding devicetree support for this,
remove the fw_config probe for storage devices so that all storage
devices are always enabled. On eMMC SKUs, UFS and ISH will be disabled
by the PCI scan anyway. On UFS SKUs, eMMC is not disabled by the PCI
scan, but keeping it enabled should have no functional impact, only a
possible power impact.
BUG=b:285477026
TEST=On joxer eMMC and UFS SKUs, boot to OS and
`suspend_stress_test -c 10`
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I834bd81ce636a6f32d50434cbf07b1d572620492
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75757
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This fixes format string vulnerability issues with snprintf statement
found by klocwork scan.
Foundby=klocwork
BUG=NONE
TEST=Boot to OS on Meteor Lake rex platform and run klocwork scan.
Check related ACPI tables and modem driver behavior after changes.
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ia6b7d70c0b2b86d0918e58348dccd206a7ee9193
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75733
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCIE_RST_L is attached to a pull down, change the init to NC.
BUG=None
TEST=Boot to OS
Change-Id: I3f7a548a33eb18327139f033d7c0d6a1843f1639
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75700
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update PCIe GPIOs during rom stage to properly initialize the
PCIe devices and allow the NVMe/eMMC to be properly detected.
BUG=b:284213391
TEST=Boot to OS
Change-Id: I24ad6c1addedb414afade2512b6628022d000a47
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Rename get_smee_reserved_address_bits to get_sme_reserved_address_bits
since the feature is called secure memory encryption and the last 'e' in
SMEE bit in the SYSCFG MSR just stands for enable. The function will
return a valid number of reserved address bits no matter if this is
enabled or not, so drop the second 'e'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3795f7a861e39cb6c8209fee10191f233cbcd308
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Move the WP signal to GPP_E12 from the current GPP_E15 to
match the design.
BUG=b:285084125
TEST=WP signal reports as we expect
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I8772173fcdcabf78b0c7d605cd495ebe04b63242
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Some references are pointing to non-existing paths. Fix that.
Change-Id: I298370c69edc41a50c859684cc5a2c1dbfc85559
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75800
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Currently the data to be put to cache region is 0x14FF90. With the
limit size 0x150000, the data for S3 can not be put into. So we expand
it a little.
Change-Id: If6b03b713059c54c7dae8f2db0f6426d8aa1aab1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69782
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is a complete rewrite of the UHCI root-hub driver, based on
the xHCI one. We are doing things by the book as far as possible.
One special case is uhci_rh_reset_port() which does the reset se-
quencing that usually the hardware would do.
This abandons some quirks of the old driver:
* Ports are not disabled/re-enabled for every attachment anymore.
* We solely rely on the Connect Status Change bit to track changes.
* Further status changes are now deferred to the next polling round.
The latter fixes endless loops in combination with commit 7faff543da
(libpayload: usb: Detach unused USB devices).
Change-Id: I5211728775eb94dfc23fa82ebf00fe5c99039709
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The original clock rate 416MHz is insufficient for 4K resolution and
causing the screen to glitch. Set the clock rate to 594MHz to support
4K resolution.
BUG=b:236328487
TEST=Glitching screen was fixed after applying this patch
Change-Id: Ic40dd28264d03ef7218ff4edd8d4182e0fe74ea3
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75661
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define a CMOS layout for Librem Mini v1/v2 spanning both banks. The
only setting provided is the automatic power-on setting, which is
implemented by the EC. This can now be configured in a firmware image
by replacing cmos.default in CBFS.
Since cmos.default is applied early in bootblock, the EC BRAM interface
must now be configured in bootblock, including opening the LPC I/O
range.
Change-Id: Ib0a4ea02d71f6f99e344484726a629e0552e4941
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74363
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Geralt SoC does not support 'persist certain regions' across reboots.
Considering the impact of missing ramoops for debugging, set
MEDIATEK_DRAM_SCRAMBLE to default n to disable this feature in
production FW image.
BUG=b:269049451,b:278478563
TEST=emerge-geralt coreboot and confirm CONFIG_MEDIATEK_DRAM_SCRAMBLE=n
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: I109634d811a928e3e6f7f56e706a5b61a52a21ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75562
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix a typo in an enum type name, "PIM2_MI" -> "SPIM2_MI".
TEST=emerge-cherry coreboot
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: Ib43a044dc69a93ad1dcaa5e65c66a82046a40777
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
As per AMD64 Architecture Programmer's Manual, section 10.2.5 SMRAM
Protected Areas:
The TSEG range must be aligned to a 128 Kbyte boundary and the minimum
TSEG size is 128 Kbytes.
The SMM TSEG size should be less than SMM reserved size.
AMD TSEG mask works like an MTRR. It needs to be aligned to it's size
and it's size needs to be a power of 2.
Change-Id: Ic4f557c7b77db6fc5ab2783ca4e2ebe7a4476e85
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75405
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add support of variant_devtree_update() function to override
devtree settings for variant boards. Also, add CPU power limit
values for mtlrvp baseboard.
BRANCH=None
BUG=None
TEST=Built the changes
Change-Id: I11bc17f25d4880562d016e29f81e37e068bb6757
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Currently if a rails PG fails to assert, the power on sequence
continue after the 20ms timeout. Instead, we should abort
and enter a power down.
BUG=b:285980464
TEST=sequence now aborts and powers down on failure
Change-Id: Id0865e6bdb5db1815ad5509306637308e98c15d7
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This commit introduces a refactored version of the IVRS (I/O
Virtualization Reporting Structure) table generation. The main objective
of this refactoring is to generalize the process of generating the IVRS
table based on the IOMMU (Input/Output Memory Management Unit) domains
and their corresponding resources.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: Ic471f05d6000c21081d70495b7dbd4350e68b774
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75451
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch configures external V1p05/Vnn/VnnSx rails for Joxer
to achieve the better power savings.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
Kit: 646929 - ADL N Platform Design Guide
BUG=b:285477026
TEST=Verified all the UPD values are updated with these configs.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I78d2a885d577f6c1a89ab74c0da7b6544322c0d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Updating from commit id 9df5910:
2023-05-10 15:42:44 +0100 - (mb/starlabs/starbook/adl: Update EC binary to 1.13)
to commit id 797e7fc:
2023-06-10 03:59:43 +0000 - (00730F01/binaryPI: fix firmware table lookup)
This brings in 8 new commits:
797e7fc 00730F01/binaryPI: fix firmware table lookup
ba23e82 cpu/intel/stm: Use URLs so a link is generated
ecad6f8 cpu/intel/stm: Mark up file name as code/monospace
3434921 cpu/intel/stm: Use *firmware* over *BIOS*
a683e04 cpu/intel/stm: Use official spelling of *Kaby Lake*
ec80479 cpu/intel/stm: Remove blank line at end of README.md
22248b1 cpu/intel/stm: Remove blank line at start of README.md
475dce4 mb/google/utils: Add script to prepare PSP verstage for signing
Change-Id: I0005c3950bcbdf407c2abfc254123931806952f2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Michał Żygowski