In case the TPM is doing a long crypto operation the initial probe
could be very delayed. Rather than end up in recovery make the delay
long enough to accommodate the (current) long crypto times.
BUG=b:65867313, b:68729265
TEST=Verified that Soraka no longer hangs during EC reboot test.
Change-Id: I3bccff70e001dfc065c24be8ad34ef239a144db1
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch enables customized NIC leds as follows:
Green Orange (Amber)
100M off blinking
1000M on blinking
BUG=b:65437780, b:68284778
TEST=Make sure the registers are programmed as expected and observe the
LEDs are behaving as expected. Perform suspend/resume test and the
LEDs are still working as expected.
Change-Id: I9bb1367a4c742c2755d620e14ee6dfe70ee7f34b
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/22293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This compares to the acpi directory in other variants.
BUG=b:68293392
TEST=Build and boot kahlee
Change-Id: I05d402995b280d6f020bc2575063dbffefa30670
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/22372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Even though this GPIO isn't used for Kahlee, it needs to be defined
so that the weak version of the variant_board_id() function can
compile.
BUG=b:68293392
TEST=Build and boot kahlee
Change-Id: Ia8daf70fbafe02ec37c6b5eb8421cdb11de3be8b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/22371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Stoney Ridge supports two different sets of SMU firmware, one for
either fanless OPNs and one for fanned.
Add a Kconfig mechanism to select the proper set and add the blobs
into cbfs.
BUG=b:66339938
Change-Id: I8510823e2232b74ec6fe001cc28953f53b2aa520
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
An upcoming PSP firmware change will allow coreboot to load the two
SMU firmware blobs (one runs in SRAM and the other in DRAM). The
traditional method is for the PSP to control most of the process,
e.g. loading the SRAM version prior to releasing the x86 reset.
Add a new command that can instruct the PSP to load a firmware blob
from a location in the flash.
The definition for commands 19 and 1a differ from others in that they
do not use a command/response buffer. Instead, the PSP will look in
the command/response pointer registers directly for the blob's
address.
BUG=b:66339938
Change-Id: I8431af341930f45ac74f471628b4dc4ede7735f4
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Move the two functions in fixme.c to places where they make more sense.
Coincidentally fix the todo in amd_initcpuio() and use bsp_topmem()
instead of explicitely reading the MSR.
BUG=b:62241048
Change-Id: Ica80b92f48788314ad290ccf72e6847fb6d039c3
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Convert functionality to use coreboot-centric functions and defined
values. This change should have no functional effect.
BUG=b:62241048
Change-Id: I87b258f3187db4247b291c848b5f0366d3303c75
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Now that recovery button has been enabled through cr50,
we can add VBOOT_PHYSICAL_REC_SWITCH config and treat
the recovery button like on any other chromebox.
BUG=b:37751915, b:63893483
BRANCH=None
TEST=With DUT in normal mode, boot into recovery, press ctrl+d
followed by pressing the recovery button. Should successfully
boot into dev mode.
CQ-DEPEND=CL:737477
Change-Id: I72fb42508083295e317dd06900796dc0cda753f6
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/22368
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
SeaBIOS 1.10.3 was tagged on October 12th, 2017 with the following
changes.
```
$ git log --oneline rel-1.10.2..rel-1.10.3
b7661dd tcgbios: Fix use of unitialized variable
6055583 boot: Increase description size in boot menu
3551613 resume: Don't attempt to use generic reboot mechanisms on QEMU
```
Change-Id: I3a9ebf10a55118fc35aed688ea7ec794333c8227
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/22358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Both registers behave the same as on the previous generation
Taken from
* 6th Generation Intel Processor Families for S-Platform
Volume 2 of 2
* Page 55 and 62
* 332688-003EN
Change-Id: Id02a38a7ab51003c9d0f16ebb2300a16b66a15f9
Signed-off-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/22350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Register definitions were taken from
* 6th Generation Intel Processor Families for S-Platform Volume 2 of 2
* Page 117
* 332688-003EN
As well as
* 6th Generation Intel Processor Families for H-Platform Volume 2 of 2
* Page 117
* 332987-002EN
Tested on a 6th gen skylake mobile cpu and capability registers do match up
with the default values.
Change-Id: I636f6c3d045e297f1439d3e88e43f41e03db4c8e
Signed-off-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/22345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The warning is printed using Printf syntax but actually Println is used
resulting in printing the format string first and the arguments second:
"%s. (%s) Default:%s WARNING: [...]"
Change-Id: I411fc47832dd7a82752f233c4909b98190340ccb
Signed-off-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/22352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Nautilus board uses Dialog da7219 headset codec,
Select the appropriate NHLT blob to be packaged in CBFS.
Also generate the required ACPI NHLT table for codec
and the supported topology in nautilus.
Removes unwanted DMIC blob pick for nautilus
BUG=b:68686020
TEST=With the required driver support in kernel verify that
the Audio plays on headset and recording on headset mic
Change-Id: I104889f54da1de38854bcb72aabbc88b739d6c09
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-on: https://review.coreboot.org/22325
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add APIs and required parameters for creating Dialog da7219 SSP
endpoints in NHLT table.
The use of a NHLT table is required to make audio work
on the kabylake SoCs employing the internal DSP. The table
describes the audio endpoints (render vs capture) along with
their supported formats.
BUG=b:68686020
TEST=check that NHLT table for da7219 is created properly
Change-Id: I57b88873f1c59c8aadf8eec3c80a9d95165a2cc3
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/22324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Since we move from cannonlake U DDR 4 platform to cannonlake U LPDDR4
platform, it is also critical to revisit the GPIO settings as they are
different. Remove unused GPIO setting for old platform, and clean up the
native function definition. PAD_CFG_NF can only select NF1,NF2 ..., set
to GPIO mode is illegal.
TEST=Boot up in chromeos successfully.
Change-Id: I0022b791bd8459ea2afdcd0241b603ce81408785
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/22326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
SCI trigger logic had to be inverted.
This patch enables the system to wake up from S3 when lid is opened
when the system is in suspend state.We are trying to match what a
external EC card running ChromeEC FW is sending on the signal.
TEST = Verified that system wakes up from S3 on toggling lid switch
back to open state.
Change-Id: Ib42a38088ee028eddc6769921b0552c569da25a9
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/22117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Fix initial tool check.
- Admit that the script is coreboot specfic. Remove coreboot check.
- Fix some whitespace issues.
- Get rid of pushd/popd.
- Add keywords for section logging.
- Move code for getting SLOC into a subroutine.
- Find submodules to get patch count instead of having them hardcoded.
- Update specific change areas for 4.7 release
Change-Id: I115659a75604c24780c09605d7643e83e481f6a1
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/22343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For internal measurements this mainboard needs a marking inside the NC
FPGA when coreboot is ready and payload has been loaded.
Change-Id: I37908b21e2a077dec7fa99b0db6d1fd9b6878341
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/22356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some Siemens copyright entries incorrectly contain a dot at the end of
the line. This is fixed with this patch.
Change-Id: I8d98f9a7caad65f7d14c3c2a0de67cb636340116
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/22355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The main goal is to allow configuring the HSIO lines from the mainboard code.
Also share the code for both romstage and ramstage.
Remove explicit dependency on the harcuvar mainboard.
Change-Id: Iec65472207309eae878d14eef5bc644b80fdbb1d
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/22309
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add string for DEVICE_PATH_NONE in dev_path. The enum DEVICE_PATH_NONE
can be translated to string and shouldn't be translated by
"Unknown device path type: 0".
Makes console output a lot prettier and readable.
Note: DEVICE_PATH_NONE is used on dummy devices for hotpluggable slots.
Change-Id: I08d471d8217f966e80daefe2d9971e357defde62
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When autoport is run on a system without supported southbridge
it won't populate the coresponding data structure. By sanitiy
checking after PCI detection autoport can exit cleanly and
provide a sufficient error message.
Error was:
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x30 pc=0x4be595]
goroutine 1 [running]:
main.FIXMEEC(0xc42014af80, 0x14, 0xc42014afe0, 0x1a, 0xc4200a914f,
0x4, 0xc4200a916f, 0xf, 0xc420149e60, 0x28, ...)
/coreboot/util/autoport/ec_fixme.go:14 +0x105
Change-Id: I6b0fcda76d33b0d3a0379c279f492160ce5add84
Signed-off-by: Maximilian Schander <maxschander@googlemail.com>
Reviewed-on: https://review.coreboot.org/22203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
RISC-V is moving towards OpenFirmware-derived device trees, and the old
functions to read the config string don't work anymore. Use dummy values
for the memory base and size until we can query the device tree.
Change-Id: Ice13feae4da2085ee56bac4ac2864268da18d8fe
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is the lazy solution, as explained in the comment, but it works for
now.
Change-Id: I46e18b6d633280d6409e42462500fbe7c6823b4d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Accessing the config string doesn't work anymore on current versions of
spike. Thus return dummy pointers until we have a better solution.
Change-Id: I684fc51dc0916f2235e57e36b913d363e1cb02b1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Our toolchain can compile mret now, and once the encoding changes, we'll
have to adjust the code anyway.
Change-Id: Ic37a849f65195006fa15d74f651a8aa9a9da5b5c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This fixes a case of mstatus corruption, where GCC generated code that
used the same register for the mprv bit and the result.
GCC inline assembly register modifiers are documented here:
https://gcc.gnu.org/onlinedocs/gcc/Modifiers.html
Change-Id: I2c563d171892c2e22ac96b34663aa3965553ceb3
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Add a comment about the tested RAM region size.
Change-Id: I29e99a06777bd21a65aa67049ceede4fd8adb603
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Sometimes (observed on Thinkpad T400s during cold boot) a few (only one
observed) garbage bytes may detained in the output queue of EC after power
up, and they should be cleared otherwise later communications will be
disrupted.
Change-Id: Id1733f7350232d0b10ac0d1bc912b62e7fa4da75
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/22181
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
EC's output could be considered as a queue, and sometimes (observed on
Thinkpad T400s during cold boot) a few (only one observed) garbage bytes
may detained in such queue after power up. Those garbage bytes should be
checked and discarded first before real interactions, otherwise they may
disrupt the interaction during EC's enablement, causing a locked rfkill.
Change-Id: Iee031306c02f5211a4512c6b4ec90f7f0db196ae
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/22180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
When using microcode header and updating the header (due to a new
release of microcode during early development) the build system
doesn't detect the header change. This commit fixes this by adding
the appropriate dependency.
Change-Id: I4211a3e39f67da727ef7cddbbee6d8c4718dee4a
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/22307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This socket is used by 2nd and 3rd generation mobile SKUs from 2011-2013.
select SSE2 per review suggestion
Change-Id: I9306a3364ae15530c99ca3379cfa2057c5879681
Signed-off-by: Hal Martin <hal.martin@gmail.com>
Reviewed-on: https://review.coreboot.org/22209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Remove the definition for the PSP PCI device from the common PSP
code. Any APU using this source should have its own definitions,
and this allows for the device to move within the config space.
Change-Id: Ie41dfa348b04f655640b4259b1aa518376655251
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On older Grus, GPIO0_A2 was an audio voltage rail enable line. On
Scarlet, we instead moved the audio codec enable (previously on
GPIO1_A2) there. Unfortunately the code still had some hardcoded
leftovers that were overlooked in the initial port and make our speakers
smell weird.
This patch fixes the incorrect GPIO settings and adds the speaker enable
pin to the GPIOs passed through the coreboot table, so that depthcharge
doesn't have to keep its own definition of the pin which may go out of
sync.
Change-Id: I1ac70ee47ebf04b8b92ff17a46cbf5d839421a61
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Schneider <dnschneid@chromium.org>
Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
bebitenc() just runs a downward loop over the same body as lebitenc().
That doesn't give you a byte-swapped result, it gives you the same final
value, just starting from the other side to fill it in. (Also, it
confused i++ and i--, so it really gives you a compiler error.)
The correct code needs to have the array index inverted relative to the
bit shift index to produce a big endian result.
Change-Id: I5c2da3a196334844ce23468bd0124bbe2f378c46
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Take the existing scattered around address space defines
and put them in iomap.h.
Change-Id: I78aa1370b05d3e2f90d43f754076b81734cccf7f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Create a new header file, iomap.h, which serves as a single
place for providing the address space definitions. Remove
the amd_defs.h file that had a single define in it.
Change-Id: I1b1aaa8c5d60d670c272ac7131faeb6b3edc1968
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Richard Spiegel