Remove the switch case in spd_get_banks. The LPDDR4X adapt DDR4 attributes.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icfaefd1856d2350c6e5a91d233ccdb10d5259391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Check for dev enabled status for CNVi and update the
UPD accordingly.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I15a03cc70f12e094badf942dd81f22bd09531051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add config to override CpuRatio or setting CpuRatio to
allowed maximum processor non-turbo ratio.
BUG=151175469
BRANCH=none
TEST=Build and boot tglrvp and observe there is no extra reset
in meminit.
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I2fa883b443d0a4c77d62275faeacd1ed2c67a97c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39493
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Reformat some lines of code
- Put names to all used MCHBAR registers
- Move MCHBAR registers into a separate file, for future expansion
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
Tested, it does not change the binary of Asrock B85M Pro4.
Change-Id: I926289304acb834f9b13cd7902801798f8ee478a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38434
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Volteer uses 4 bits (hardware straps) to indicate what memory
configuration the board is populated with (i.e. which SPD file
to use for the populated memory). This allows for only 16
different SPDs for supporting Volteer and all future variants of
Volteer. Currently, each memory chip needs its own SPD file, so we
can only support 16 different memory chip options for Volteer and
all of its variants.
Generic SPD files are just SPD files that have been stripped down
to contain only fields that are important for the memory controller
(strips out items like vendor info, for example). Using generic SPD
files allows for more than 16 different memory options given it's no
longer a 1-to-1 mapping as similar memory modules from different
vendors can share the same generic SPD file.
BUG=b:147857288
TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto and
verify ripto boots to kernel and "cat /proc/meminfo" reports 8GB
of memory.
Change-Id: I17bd4f4a00b4e3bbaf845d6d321962c11569a186
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39423
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add template files for making a new barebones-copy of Volteer.
BUG=b:147483699
BRANCH=None
TEST=N/A
Change-Id: I8cc69b8ce7dbc6809de058019bdc466a060069e7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Disable the BT module in bootblock and enable it in ramstage. This
allows for loading the BT firmware during reboot.
TEST=Build and boot the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0406a68ffcab2675a1aedb212cb7c8508a5b61fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39446
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update GPIO reset type from PLTRST to DEEP.
DEEP setting is more conservative for S3/S4/S5.
Detail information is bug.
BUG=b:151305120
TEST=Build and boot to OS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ie7d08560ea2ef3623bbd4734b30c80e707869c7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39476
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the ECPD (GOOG0003) device under CREC (GOOG0004) so that the ECPD AP
device drivers can access the parent EC device to communicate with the
EC. Also, update the Notify() call to reflect the new location of the
ECPD device.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Change-Id: I830b030c7a063506f50f9cd51df3a5018e248fc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Provide settings for configuring the link between HD-Audio controller
and display unit for purposes of HDMI/DP Audio playback.
BUG=b:144708516, b:148385924
TEST=none
Change-Id: I225faac68729b28be65b4d8f1f83769a874f84ff
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39356
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Early ec sync needs to be disabled for EFS2 to function.
BUG=b:151115320
BRANCH=none
TEST=none
Change-Id: I384d072d9614a5cd30837f7cdfb777ad5e4f6b19
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
commit 7f9ceef disables TCO SMIs unless specifically enabled, so help
the linker throw out the function that handles them in that case.
Change-Id: Ia3c93b46e979fb8b99282875b188415f249d38dd
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michael Niewöhner
Limit PcieL1Substate for RP9, RP11 for ES1 NVMe warm reboot workaround.
Reference: #613582 Tiger Lake PCH-LP Sightings Report
issue id #1409566330
BUG=none
BRANCH=none
TEST= boot to OS and check warm reboot with NVMe
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ie85bf71c43427e326ef2ba674da4566f8f51495a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Set value for PcieRpL1Substates according to devicetree.
Chip config parameter PcieRpL1Substates uses (UPD value + 1)
because UPD value of 0 for PcieRpL1Substates means disabled for FSP.
In order to ensure that mainboard setting does not disable L1 substates
incorrectly, chip config parameter values are offset by 1 with 0 meaning
use FSP UPD default.
get_l1_substate_control() ensures that the right UPD value is set in
fsp_params.
Chip config parameter values
0: Use FSP UPD default
1: Disable L1 substates
2: Use L1.1
3: Use L1.2 (FSP UPD default)
BUG=none
BRANCH=none
TEST=Boot up and check FSP log for PCIe config for this values
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I66743a29ad182bd49b501ae73b79270a9eb88450
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39412
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Check for dev enabled status for HDA controller and
update the UPD accordingly.
BUG=151174264
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Id5dfff275ed9906852ef7eb7461fbe89a3a115c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39441
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable USB ACPI driver. Add ACPI configuration for all the USB ports.
Since one of the USB ports is used for Bluetooth configure the
reset_gpio used by that port.
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3e7b8f00102c96dcc295601359d3ecfbcd1bea00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
BUG=b:148604250
BRANCH=none
TEST=Build and test booting TGLRVP form NVMe and Optane
Check PCIe lane configuration
Show all the NVMe devices
lspci -d ::0108
Show all the NVMe devices and be really verbose
lspci -vvvd ::0108
Print PCIe lane capabilities and configurations for all the NVMe devices.
lspci -vvvd ::0108 | grep -e x[124]
Print all the PCIe information of the device ae:00.0
lspci -vvvs ae:
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I5fc8fa0897ad006de9ebe20115bf3033e1e1b499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
This adds case intrusion detection to the SMI handler. At this point one
can add the code to be executed when the INTRUDER signal gets asserted
(iow: when the case is opened).
Examples:
- issue a warning
- trigger an NMI
- call poweroff()
- ...
Tested on X11SSM-F.
Change-Id: Ifad675bb09215ada760efebdcd915958febf5778
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There seems to be no board using this, but some currently under review.
Remove the DSDT, which doesn't work together with the SSDT ACPI
code generation. Also update the documentation pointing to the SSDT
generator.
Change-Id: I8b7daeadaaac93d74ee2fc9eb18f0eff5ef50eb3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In case backlight control isn't enabled BCLM is zero.
Return early instead of running into a DivideByZero error.
This happens on devices that don't have backlight control, like
desktops and servers. The proper fix is to not include those
ACPI methods, but that requires a much bigger refactoring.
Change-Id: Ie9bdb00949d6d44fd99321db556d6008d2d12a7f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Drallion.
Change-Id: I146068d8019859be1c27e2a8174dfe7909d42d0a
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe
storage device and NVMe Optane memory. Storage device uses rp9 and
optane memory uses rp11. This patch enables rp11. Please note that
these two share clk related pins.
Configuring pciecontroller3 to be set from 2x2. This will by done by
auto detecting optane memory: enabling HybridStorageMode.
BUG=b:148604250
BRANCH=chromeos
TEST='Build, boot and look for two NVMe devices with lspci on Volteer'
Cq-Depend: chrome-internal:2501837
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: I5430829b496ed275e2e3bda3c0bf21c3d2132628
Reviewed-on: https://chrome-internal-review.googlesource.com/c/chromeos/third_party/coreboot-intel-private/jsl-tgl/+/2424428
Tested-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39420
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set TCO to issue an SMI when the case instrusion switch gets pressed.
The SMI is controlled along with the general TCO SMI Kconfig.
Tested on X11SSM-F.
Change-Id: I3bc62c79ca3dc9e8896d9e2b9abdc14cfa46a9e7
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Wonkyu Kim