The <inttypes.h> header currently does nothing but include the
definitions from <stdint.h>, so let's #include that directly instead.
Change-Id: I9d83ad37d0d7300a093001596ce3f0b3830c5701
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Change-Id: Id8fa880357124b620bde8884949bd8ffff7d0762
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change the stoneyridge definitions into picasso. The named 0 and 1
buses are controlled by the PSP and not directly accessible by host
firmware. I2C4 operates only in slave mode so is not added to to
the bus clear-after-reset sequence.
The I2C controller is fundamentally the same as on Stoney Ridge so
the ability to clear a potentially jammed bus is still required.
Program Picasso's new pad control registers in the MISC AcpiMmio
space according to the recommended settings.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ibbc5504ebc36654e28c79fe3ae17cc0d9255118f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Change the Stoney Ridge ID to Picasso. Rename family 15h. Get the
number of cores/threads from CPUID as all D18 registers are new.
Change-Id: I44c45db637897f6caf320032c9f79a3a1ab4d6c9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Picasso has only a single 48M output. Simplify the setup function.
Note that while the feature is similar to older products, the register
definition and Enable bit has changed.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Iebaf5219fdcd3145a4faf906f656a7fbdc7e0c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Remove the Family 15h device. It's not in Family 17h documentation
and isn't detectable with HDT.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ifa9c06f78f39a3ec3b555d4ecc542172cd44a0b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33990
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the scratch register indicators. Per AMD, AGESA no longer
uses these. Use a new IO register to determine whether a warm
reset should occur.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I0ff7935004b3d1ac5204d3ef575cfa98116a57fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33989
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make the definitions match Picasso's definitions. Add/remove pins
that differ from stoneyridge, update GEVENTs for the FCH mapping.
Change-Id: I59f958151f27ed4ca0eb1a87ade6102eec1e5061
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
One case slipped past the review and rebase of 733c28fa42
(soc/intel/{cnl,icl}: Use new power-failure-state API).
Change-Id: Id01df30d10e202e9672bf5be799a84f4f202fe24
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34812
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Get rid of this function and its dangerous, weak implementation.
Instead, call pmc_set_power_failure_state() directly from the SMI
handler.
Change-Id: I0718afc5db66447c93289643f9097a4257b10934
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Needed some Makefile changes to be able to compile for SMM.
Change-Id: Ibf218b90088a45349c54f4b881e895bb852e88bb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
pmc_soc_restore_power_failure() is only called from SMM, so add
`pmc.c` to the `smm` class. Once all platforms moved to the new
API, it can be implemented in a central place, avoiding the weak-
function trap.
Change-Id: Ib13eac00002232d4377f683ad92b04a0907529f3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34726
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also move pmc_soc_restore_power_failure() which was guarded twice to
not be included in SMM, where the only call lives. Once all platforms
moved to the new API, it can be implemented in a central place, avoi-
ding the weak-function trap.
Change-Id: Ie72753764ecd876e6cb999fa0074d1114ae5efcf
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34725
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is a consolidation of the respective feature in `soc/intel/*lake/`,
including additional support for MAINBOARD_POWER_STATE_PREVIOUS.
For the latter, firmware has to keep track of the `previous` state. The
feature was already advertised in Kconfig long ago, but not implemented.
SoC code has to call pmc_set_power_failure_state() at least once during
boot and needs to implement pmc_soc_set_afterg3_en() for the actual
register write.
Change-Id: Ic6970a79d9b95373c2855f4c92232d2aa05963bb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The MT8183 SOC has a DISP (display controller) that supports
overlay, read/write DMA, ... etc. The output of DISP goes to
display interface DSI, DPI or DBI directly.
Reference: MT8183 Application Processor Functional Spec,
6.1 Display Controller
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ic4aecc58d081f14f5d136b9ff8e813e6f40f78eb
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Move those will be shared by other MTK SOCs (for example, MT8183) to
common/ddp.c.
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Oak
Change-Id: Ie5709ab6e263caa21fdf7e799dc2ee884ffaf800
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The 'dual DSI mode' was never used by any real boards running coreboot
and is introducing lots of complexity when it comes to refactoring.
In order to create a common display stack for MTK SOCs, we want to first
drop dual DSI mode so 8173 and 8183 DSI/DDP implementation will be more
similar to each other.
BUG=b:80501386,b:117254947
TEST=emerge-oak coreboot
Change-Id: I357c30cc687803ca8045d0b055dec2e22eef4291
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34693
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Sarien.
Change-Id: Ibc336be0523ff4e65a818474907faf20fc417ff4
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Arcada.
Change-Id: I1915b974b10638b0f6ab97c6fb9b7a58d2cabc59
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Recent Coverity scan indicated potential NULL deference; if either
spi->dma_in or spi->dma_out are NULL, the fifo_error() check could
dereference a NULL pointer.
Also fixed what appears to be a logic bug for the spi->dma_out case,
where it was using the todo (count) from spi->dma_in.
Found-by: Coverity CID 1241838, 1241854
Change-Id: Icd1412f0956c0a4a75266d1873d5e9848aceee32
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34787
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The common code adheres to the Intel requirement of bringing up the
cores with INIT SIPI SIPI. This sequence is tolerated on some AMD
AMD CPUs but fails on others. Add a way to skip the second SIPI.
TEST=Mock up on grunt and verify no errors
BUG=b:138919564
Change-Id: I201869003ddc7d04d332cd5734ac6d63979d89e0
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34759
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There was the potential for misuse of the override early GPIO table,
because if the override early GPIO table did not have a corresponding
entry in the base table, it would not get overridden, and there was
no way to know except manual inspection (this has already happened
here), so now all hatch mainboards are required to explicitly list out
all of their required early GPIOs.
TEST=booted several hatch boards, verified that they can communicate
with TPM and successfully train memory
Change-Id: I0552b08a284fd6fb41a09fef431a0d006b0cf0bd
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Currently SPI bus id is used to map to the controller in order to set
the controller state. In certain platforms SPI bus id might not be
exactly the same as GSPI bus id. For example, in Intel platforms SPI bus
id 0 maps to fast spi i.e. SPI going to the flash and SPI bus id 1 .. n
map to GSPI bus id 0 .. n-1. Hence using SPI bus id leads to mapping to the
GSPI controller that is not enabled. Use the GSPI id bus so that the right
controller is set to active state. This fixes the regression introduced
by CB:34449
BUG=b:135941367
TEST=Boot to ChromeOS.
Change-Id: I792ab1fa6529f5317218896ad05321f8f17cedcd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested on qemu-riscv.
Depends on OpenSBI integration and proper memory detection in qemu.
Boots into Linux until initrd should be loaded.
Tested on SiFive/unleashed:
Boots into Linux until earlycon terminates.
Change-Id: I5ebc6cc2cc9e328f36d70fba13555386bb8c29d6
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30292
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previous setting was correct but assumed SMI handler is
always located at the beginning of TSEG. Break the assumption.
Change-Id: I5da1a36fc95f76fa3225498bbac41b2dd4d1dfec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34730
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The callers don't necessarily check return value of
function. Make sure the parameters are not left
uninitialised in that case.
Change-Id: Ic02db2d35b2ec88506320e7df609940de4aef005
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34708
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Do this to avoid some amount of explicit typecasting
that would be required otherwise.
Change-Id: I5bc2c3c1dd579f7c6c3d3354c0691e4ba3c778e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This is declared weak so that platforms that do not
have smm_subregion() can provide their own implementation.
Change-Id: Ide815b45cbc21a295b8e58434644e82920e84e31
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add explicit CBMEM_STAGE_CACHE option. Rename
CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE.
Platforms with SMM_TSEG=y always need to implement
stage_cache_external_region(). It is allowed to return with a
region of size 0 to effectively disable the cache.
There are no provisions in Kconfig to degrade from
TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE.
As a security measure CBMEM_STAGE_CACHE default is changed to
disabled. AGESA platforms without TSEG will experience slower
S3 resume speed unless they explicitly select the option.
Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change adds the following improvements:
* Easier to read.
* Checks to see if .xcompile is complete.
* Checks the make return code. This will catch if .xcompile is missing.
BUG=b:112267918
TEST=Modified my .xcompile and ran abuild and verified that
missing_arches got set correctly. Also deleted .xcompile and verified
there was a failure.
Change-Id: I7604d431f398fc0c80a857a0c7c21e164004cc99
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
To avoid confusion use VENDORCODE_ELTAN_VBOOT and
VENDORCODE_ELTAN_MBOOT config values.
Include verfied_boot and mboot subdirectories as CPPFLAGS when
measured boot or verified boot is enabled. This allows to generate
binary with measured boot enabled only.
BUG=N/A
TEST=Boot Linux 4.20 and verify logging on Facebook FBG-1701
Change-Id: Iaaf3c8cacbc8d2be7387264ca9c973e583871f0a
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33442
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the 3rdparty/blobs submodule to the newest HEAD, which
contains the SPM binary for MT8183 platforms
( https://review.coreboot.org/c/blobs/+/34543 ).
Change-Id: I505ec9fffd9ddd62fffbe9514cbba50625825693
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34734
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The BMC on Supermicro X11SSH takes 34 seconds to start the IPMI KCS, but
the default timeout of the IPMI KCS code is just 100 msec.
Add a configurable timeout option to wait for the BMC to become ready.
As it only should boot very long after power on reset, it's not a
problem on reset or warm boot.
Tested on Supermicro X11SSH.
The IPMI driver doesn't fail with a time-out any more.
Change-Id: I22c6885eae6fd7c778ac37b18f95b8775e9064e3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Updating from commit id dac763c7:
2019-05-10 10:43:55 -0700 - (Make vboot -Wtype-limits compliant)
to commit id 9c906110:
2019-08-06 06:07:01 +0000 - (vboot/tpm: fix return type inconsistencies)
This brings in 68 new commits.
Change-Id: Ia96347d8ed94db6f0ec5f5108cb98ab0c4087bd4
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Sometimes the display native orientation does not match the device
default orientation, so allow rotation of the framebuffer before
it is displayed on screen.
set_pixel now take coordinates in the rotated coordinate system,
and converts the coordinates before writing to the framebuffer.
Also, screen.size now matches the rotated system (_not_ the
framebuffer size).
BUG=b:132049716
TEST=Boot krane, see that FW screen is orientation properly.
Change-Id: If9316c0ce33c17057372ef5995a2c68de4f11f02
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Sometimes the display native orientation does not match the device
default orientation. We add a parameter to be passed to libpayload,
which can then do the rotation.
BUG=b:132049716
TEST=Boot krane, see that FW screen is orientation properly.
Change-Id: I5e1d94b973a3f615b73eebe0ca1202ba03731844
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This CL adds a new board, QEMU/AArch64, for ARMv8. The machine supported
is virt which is a QEMU 2.8 ARM virtual machine. The default CPU of
qemu-system-aarch64 is Cortex-a15, so you need to specify a 64-bit cpu
via a flag.
To execute:
$ qemu-system-aarch64 -M virt,secure=on,virtualization=on \
-cpu cortex-a53 -bios build/coreboot.rom -m 8192M -nographic
Change-Id: Id7c0831b1ecf08785b4ec8139d809bad9b3e1eec
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Jacob Garber