Hiding pointer types behind 'typedef's is usually not a great
idea at the best of times. Worse the typedef becomes an integer
at different stages in Coreboot. Let us refrain from doing this
at all.
Change-Id: Ia2ca8c98bb489daaa58f379433875864f6efabc8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7136
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
The romstage component of Super I/O support is in fact written around
passing a lower and upper half packed integer. We currently have two
typedef's for this, 'device_t' and 'pnp_devfn_t'. We wish to make use of
'pnp_devfn_t' over 'device_t' as 'device_t' changes it's typedef in the
ramstage context and so is really a conflicting definition. This helps
solve problems down the road to having the 'real' 'device_t' definition
usable in romstage later.
This follows on from the rational given in:
c2956e7 device/pci_early.c: Mixes up variants of a typedefs to 'u32'
Change-Id: Ia9f238ebb944f9fe7b274621ee0c09a6de288a76
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6231
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
'pci_devfn_t' and 'pnp_devfn_t' are already defined in arch/io.h
Change-Id: I006182bf6933fae21fe6671659b76e7031e74b71
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6230
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Part number is used only for coreboot ROM identification and
in coreboot tables. Rather than guessing the P/N, just use readable name.
SMBIOS uses information from EEPROM and so isn't affected.
Change-Id: I33534c3acb83f20d5b493c82bfc98896bf64ff1a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7177
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
The simo board with console output at UART port 1 (COM2) will not produce
any output if CONFIG_UART_FOR_CONSOLE=1 is set correctly.
Commit f29200240e
(superio/ite/*: Factor out generic romstage component)
will only and always activate UART port 0 unregarded to
CONFIG_UART_FOR_CONSOLE value.
Now the UART port which was selected by CONFIG_UART_FOR_CONSOLE
will be enabled and used for console output
Change-Id: Ibbd2b5115b1ed4763962ba32fc9c19431a906c78
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Reviewed-on: http://review.coreboot.org/7060
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
IMC fan control should be enabled after OS launched.
I have tested on OliveHill and Parmer with Windows 7 and Ubuntu 13.10.
Change-Id: I16d6ff6b1272d16b840e803e0a95f6e363c79704
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/7165
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The fan can stop but can't run again. "AGESA: Call get_bus_conf() just
once" (commit ef40ca57) results to this problem.
This patch can resolve this problem.
Change-Id: I1b5bf3f6f7a66c60743f78918dc5442cdfc8b6e4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6981
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
These functions are only used for ramstage.
Change-Id: I089230ca625037637c7af061b0939fd981dbdfd2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7148
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Regression introduced with commit
7b23ae0 AGESA: Trace execution with AGESAWRAPPER()
As the call is made before console_init() is called it must
not call any printk(). Debugging Olivehill and Parmer platforms
using a custom FPGA (as these boards have no Super-IO UART) have
been observed to halt and/or delay at early boot.
Change-Id: I3ab4e5378db44aece9046c8636cde1053ce5390d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7059
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
The new broadwell support uses the reg_script functions in romstage.
Change-Id: Ic040bf947d35854711f4c1547858b0e4378ef759
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7003
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The reg_script functionality is only used by specific chipsets so have
it selected instead of defaulting to y for ARCH_X86.
Change-Id: I8fb9466e148eed7896ca8ed80755c77ba1190583
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7006
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
nyan_big: Add 204MHz BCT for bringup, use 1.2V for VDD_CPU
Reviewed-on: https://chromium-review.googlesource.com/183939
(cherry picked from commit a6df76afb5342b805baca749abb8265e15748dc1)
nyan_big: Add initial 792MHz BCT
Reviewed-on: https://chromium-review.googlesource.com/183975
(cherry picked from commit 61d0122fdce6dc9479666bb0a5bc079c6389f78a)
nyan_big: use RAM_CODE[3:2] for ram code
Reviewed-on: https://chromium-review.googlesource.com/184076
(cherry picked from commit 35e5c5e473f871cdc897473a31586afbececd716)
tegra124: support tri-state Board Id
Reviewed-on: https://chromium-review.googlesource.com/183855
(cherry picked from commit 1a9d1bd73aa2cd0c36203b247976ad0d00a360e4)
nyan*: Fix SPI pinmux configuration
Reviewed-on: https://chromium-review.googlesource.com/184281
(cherry picked from commit ac4106b673c285af66d72392bd4a8522aba98489)
nyan_big: Add 4GB 204/792MHz BCTs
Reviewed-on: https://chromium-review.googlesource.com/184159
(cherry picked from commit 5ff002d09f8db0543b58962f6c0d24627fb0937e)
tegra124: Add function for obtaining DRAM size via MC regs
Reviewed-on: https://chromium-review.googlesource.com/184535
(cherry picked from commit d4580c46de649903a266a99eb11c9126ba385b48)
tegra124/nyan*: Obtain DRAM size dynamically
Reviewed-on: https://chromium-review.googlesource.com/184431
(cherry picked from commit a7db71744771decc04cf1966efba70bf4897cfa3)
tegra124: Rearrange iRAM layout to allow more space for romstage
Reviewed-on: https://chromium-review.googlesource.com/184240
(cherry picked from commit 6bdaabbc068146a4516c724b71d31bb777dabcfc)
tegra124: Fix MemoryType field name in SDRAM parameters.
Reviewed-on: https://chromium-review.googlesource.com/185113
(cherry picked from commit 9caccd1e86a8c683402fab87d9f3a49b87496e97)
nyan_big: Initialize SDRAM without BootROM.
Reviewed-on: https://chromium-review.googlesource.com/183624
(cherry picked from commit a1cbc00aa80ec1ea52e833a8e31c8e4b27160e70)
tegra124: move FB_SIZE_MB to a more appropriate location
Reviewed-on: https://chromium-review.googlesource.com/184930
(cherry picked from commit ddea486fd4410394417c4e59039d46a324918bdc)
nyan: Initialize SDRAM without BootROM.
Reviewed-on: https://chromium-review.googlesource.com/185114
(cherry picked from commit 1ff51b580b28553919f91b11b443251b048cf26b)
tegra124: Save SDRAM parameters to PMC registers for LP0
Reviewed-on: https://chromium-review.googlesource.com/182928
(cherry picked from commit 7476b4bd0ecdc312476cce871d22f57915a0bd86)
tegra124: Rewrite SDRAM parameter saving code to be more efficient
Reviewed-on: https://chromium-review.googlesource.com/184388
(cherry picked from commit 25084bd0407624e4b2ff82388c32af1198c501a6)
nyan: Slightly change the way SDRAM parameter files are set up
Reviewed-on: https://chromium-review.googlesource.com/185286
(cherry picked from commit a31887b804f23e031c395113db582cd71f3d1b6d)
Squashed 16 commits for SDRAM support on nyan and nyan_big.
Change-Id: I07419985376277083d62400dd14fe8273f6d5ca8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6949
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Most of the code related to the mc146818 is not related to the RTC and is
really for managing the CMOS storage. Since we intend to add a generic API
for RTC drivers it's inconvenient for those functions to have an rtc_ prefix.
This CL renames those functions so they start with cmos_ instead. There are
some places where rtc_init was called with a comment that says something about
starting the RTC. That wasn't correct before (the RTC is always running), but
it looks a little odd now that the function is called cmos_init.
This CL also opportunistically cleans up some style problems in this file.
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/197794
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788)
Removed the addition of stdint.h to mc146818rtc.h since
types.h is now included. Changed rtc_init to cmos_init for
fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex.
Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6977
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
These constants aren't used anywhere.
Change-Id: Ifdad9b088a281909892edb34dcb58419e0e123ba
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192047
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3cdaf9dd7de6ae71efc9e74335d876ec55f9ca0a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7008
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Not doing so makes it fail when run at high frequency.
Change-Id: I1cfb69c55f03cb90f66f437289803d897a1aad5c
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/191812
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 04452441d2bfe2cacd3e0b6990c0e9261b5350d1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7007
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
broadwell: Add romstage usbdebug support
Reviewed-on: https://chromium-review.googlesource.com/199412
(cherry picked from commit 1050e7d3be6ec1e4fe5aa2df408f4bb6d33a42b5)
broadwell: Add romstage code to configure PCH UART for console
Reviewed-on: https://chromium-review.googlesource.com/199807
(cherry picked from commit ecebda4eb5d6fe58473d25c2898ba1a2eac0f39a)
broadwell: Expand the PCI device convenience macros
Reviewed-on: https://chromium-review.googlesource.com/199891
(cherry picked from commit f8c54c70f136cd2cb8f977bc25661974d7e529ad)
broadwell: Add ramstage driver for ADSP
Reviewed-on: https://chromium-review.googlesource.com/199892
(cherry picked from commit e8e986b0ba52bbfc9923d71009fbd31e749ca43f)
broadwell: Update ACPI devices
Reviewed-on: https://chromium-review.googlesource.com/201080
(cherry picked from commit 2446b35578eb36e0009415bec340059135751549)
broadwell: Reserve DPR region
Reviewed-on: https://chromium-review.googlesource.com/201081
(cherry picked from commit 8ecd9d2096db2bded6f27ef6ee9a9b39ce2dfec6)
broadwell: Remove old pei_data and add cpu function for romstage
Reviewed-on: https://chromium-review.googlesource.com/201690
(cherry picked from commit d206c9cdd69519d502a90bb0595f0e3a7cb50274)
broadwell: Fixes for graphics without executing VBIOS
Reviewed-on: https://chromium-review.googlesource.com/202356
(cherry picked from commit 0c031df1ce92c875e95ddfd3f026f649c342c7fa)
broadwell: Fix compilation failure when loglevel is lowered
Reviewed-on: https://chromium-review.googlesource.com/202357
(cherry picked from commit 708ce78b2bfae5664b1238e17b086c88cac55bdc)
broadwell: Disable GPIO controller interrupt
Reviewed-on: https://chromium-review.googlesource.com/203645
(cherry picked from commit 2d17e98eded5958258ba5c0abf600284d8d03af9)
broadwell: Add support for E0 stepping
Reviewed-on: https://chromium-review.googlesource.com/205160
(cherry picked from commit 802e9d371418cc7a7fc7af131d7e5dda0ae5b273)
broadwell: misc updates for CPU driver
Reviewed-on: https://chromium-review.googlesource.com/205161
(cherry picked from commit ea1d403817ee193648f2c119fd45894e32e57e97)
broadwell: Read power state earlier and store in romstage params
Reviewed-on: https://chromium-review.googlesource.com/208151
(cherry picked from commit b2198d71084ad3c1360a0bfedc46c8dd3825bd0e)
broadwell: Add parameters to pei_data structure
Reviewed-on: https://chromium-review.googlesource.com/208153
(cherry picked from commit 423fbf67e497a907fbc8e12caf2929d4951858af)
broadwell: Move platform report output after power state is read
Reviewed-on: https://chromium-review.googlesource.com/208213
(cherry picked from commit acedf4146bf9377133433046dae1fa9c8bc69d78)
Squashed 15 commits for broadwell support.
Change-Id: I87e320d3d5376b84dd9c146b0b833e5ce53244aa
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6982
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This broadwell implementation will support Haswell ULT in
addition to broadwell CPUs. Add the latest available microcode
for the broadwell C0 and D0 parts as well as Haswell ULT.
Change-Id: I1beb71e0e28af3508e2260751b6fdfe47d53d90d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198742
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 69d5b7c834a4f52656ab14562ea913477418e588)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6965
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This is common code for Intel SOC that can be shared.
Change-Id: Ic703f36f56a8238d5cc1248b353d8c3a49827a9a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196264
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 3a9057b9616c54a8404eee55511743d2492dbc28)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6968
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This common code can be shared across Intel SOCs.
Change-Id: Id9ec4ccd3fc81cbab19a7d7e13bfa3975d9802d0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196263
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit f9919e2551b02056b83918d2e7b515b25541c583)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6967
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
baytrail: Change all GPIO related pull resistors from 10K to 20K
Reviewed-on: https://chromium-review.googlesource.com/187570
(cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e)
baytrail: workaround kernel using serial console on resume
Reviewed-on: https://chromium-review.googlesource.com/188011
(cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469)
baytrail: allow dirty cache line evictions for SMRAM to stick
Reviewed-on: https://chromium-review.googlesource.com/188015
(cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca)
baytrail: Optionally pull up TDO and TMS to avoid power loss in S3.
Reviewed-on: https://chromium-review.googlesource.com/188260
(cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6)
rambi: always load option rom
Reviewed-on: https://chromium-review.googlesource.com/188721
(cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9)
baytrail: use new chromeos ram oops API
Reviewed-on: https://chromium-review.googlesource.com/186394
(cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594)
rambi: always show dev/rec screens on eDP connected panel
Reviewed-on: https://chromium-review.googlesource.com/188731
(cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95)
baytrail: stop e820 reserving default SMM region
Reviewed-on: https://chromium-review.googlesource.com/189084
(cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24)
baytrai: update MRC wrapper header
Reviewed-on: https://chromium-review.googlesource.com/189196
(cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970)
rambi: Put LPE device into ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/189371
(cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413)
baytrail: DPTF: Enable mainboard-specific PPCC
Reviewed-on: https://chromium-review.googlesource.com/189576
(cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612)
baytrail: Add config option for PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189994
(cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5)
rambi: Enable PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189995
(cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6)
Squashed 13 commits for baytrail/rambi.
Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6957
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
These allocations are not really part of write_tables() and the move
opens possibilities to use CBMEM instead of SPI Flash to restore some
parts of system state after S3 resume.
Change-Id: I0c36bcee3f1da525af077fc1d18677ee85097e4d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7097
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Just took combined sandybridge per-device ACPI patch and applied it
on FSP flavour to avoid need of separate tests.
Change-Id: I09838cc01ede504416078edcb1c267a11539e714
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7044
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
A cast did not work for me, but this variable did.
This is one of the many issues with building e3501 I'm
running into.
Change-Id: Ifb19a17770604f2d63dfef762d08200add77ee34
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7122
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Two issues:
1. without config, there were two NULL derefs
2. output for "Secondary" looked at ide0_enable
Change-Id: I34ddbc0f9b27226981ccbc237e3d59e522076d55
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6989
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Native raminit for sandy/ivybridge was introduced in:
7686a56 sandy/ivybridge: Native raminit.
An additional current level is needed.
Change-Id: Ied73d168045c25d37afa5d9d7073de7f9c6435c7
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7098
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
Without this patch the laptop powers down after resume.
Change-Id: Ic6486fd4c4cc55b1ac5695f9d6d83fc2193b7eba
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7102
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
This amdfam10 board was by mistake modified with commit
b6f3da4 AGESA CIMx: Move late init out of get_bus_conf()
Change-Id: I8edf6f7f4cc635d31e7e485e3f6de57ef8ed7b1e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7104
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
As introduced in:
1783a3c ivybridge: LVDS gfx init.
The panel on the T520 is a LP156WD1 40 pin LVDS (2 ch, 6-bit).
Tx parameters derived from datasheet table.
Change-Id: Ib733836e3233a7f14a79f36a27ed36b638e837f5
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7100
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
It's specific to butterfly. Doesn't do anything on lenovos.
Change-Id: I98b7c3199de5d8515bd869936e1b95847321d264
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7099
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This patch adjusts the read timeout in order to support flash chips
which needs more than 60ms to complete a spi command.
This problem can be reproduced on a Thinkpad T520 with M25PX64 spi chip ( suspend to ram bug ).
Change-Id: I22b2e59f1855ead6162a292b83b9b854b55c0235
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7105
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Move generic options to the "General Setup" menu.
Move device specific options to the "Devices" menu.
Change-Id: I514a021305d43f026b24fd3016477300700ed401
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7089
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Support added for Micron N25Q128 SPI flash, which has
the same manufacturer id as ST Micro. Jedec ID =
0x20 0xBB 0x18. Since existing stmicro.c only compares
the last device id byte, this flash is mistakenly
identified as M25P128, which has ID = 0x20 0x20 0x18.
To handle this situation and avoid breaking code for
existing devices, a two byte .id member is added.
New devices should be added to the beginning of the
flash table array with .idcode = STM_ID_USE_ALT_ID and
.id = the two byte jedec device id.
A 4KB subsector erase capability is added and used for
this new device. It requires using a different SPI
op-code supported by adding .op_erase member. Previous
devices defined in stmicro.c are assigned their original
op-code for 64KB sector erase.
N25Q128 is now working on a custom designed Bayley Bay
based board. Tested by verifying the MRC fastboot cache
is successfully (re)written. Note that previous devices
were not retested.
Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7077
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Change-Id: Iac53462ab3621d96ba15e2fde2800212584246db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7072
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Nowhere in database p_state_num is set. So this whole function ends up
being a noop. Moreover the offsets used by it are wrong with any
optimizing iasl. Remove it in preparation of move to per-device ACPI.
Change-Id: I1f1f9743565aa8f0b8fca472ad4cb6d7542fcecb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7012
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
We had lots of casts that caused warnings when compiling on RISCV.
Clean them up.
Change-Id: I46fcb33147ad6bf75e49ebfdfa05990e8c7ae4eb
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7066
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This really is not critical but we might as well get it right.
Change-Id: Ifec1e8dc35d7f5bb89d9a7a877d82410c83a3288
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7070
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
It's specific to butterfly. Doesn't do anything on lenovos.
Change-Id: I7b607196733225eace0f5e70b4cc02651488aa74
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6841
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As currently many systems would be barely functional without ACPI,
always generate ACPI tables if supported.
Change-Id: I372dbd03101030c904dab153552a1291f3b63518
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4609
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The offset of the device_nvs in the gnvs struct is expected to be
0x1000. It is actually 0x100 so padding is needed to move device_nvs
to the expected location. ACPI references to device_nvs objects will
be correct with the padding.
This was tested using a Micro Industries customized Baytrail-I board
based on the Intel Bayley Bay CRB. In intel/baytrail/nvs.h, there's
a Google customized structure located at 0x0100-0x0FFF that is
removed from the fsp_baytrail/nvs.h which explains the mismatch here.
Change-Id: I4721a79b53b5b3345ff9b0c053bdd31d2cf9cb61
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7038
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
ACPI globalnvs.asl expects the gnvs memory area size to be 0x2000.
Padding has been added to device_nvs struct to reserve the full
0x2000 bytes for gnvs usage.
No known issues are caused by having the GNVS area shorter than
what ACPI thinks. Since there's nothing defined in this area,
O/S shouldn't try to access it. Only problem might be if O/S
notices the SSDT is located within the GNVS defined area.
I verified that the next table written to memory (SSDT) is 0x2000
past GNVS start using a custom-designed Baytrail-I motherboard
based on the Intel Bayley Bay CRB.
Change-Id: I9792954c7a3403eba6f37d7e53ea4a9ed3a2e4ac
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7039
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Zero out the GNVS area so that uninitialized portions are defined.
Tests using Microsoft Windows (XP/7/8) gave a bluescreen bugcheck: A5
(ACPI_BIOS_ERROR) with the first parameter (0x00001000)
(ACPI_BIOS_USING_OS_MEMORY). Some ACPI enumerated devices use the
GNVS area to define whether they're enabled and their MMIO regions.
On my custom baytrail-based board and build, these devices were
disabled but GNVS had uninitialized data indicating the devices
were enabled with improper MMIO regions.
Should investigate further to see where the GNVS device values are
set if enabled and make sure they're set to valid values even when
the devices are disabled via the mainboard/devicetree.cb.
Change-Id: I2b575c65bfaab58ae6206ac6f457c259c27a7d97
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7040
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Edward O'Callaghan