Instead of having callers query the romstage handoff resume
status by inspecting the object themselves add
romstage_handoff_is_resume() so that the same information
can be queried easily.
Change-Id: I40f3769b7646bf296ee4bc323a9ab1d5e5691e21
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17647
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The same pattern was being used throughout the code base
for initializing the romstage handoff structure. Provide
a helper function to initialize the structure with the S3
resume state then utilize it at all the existing call sites.
Change-Id: I1e9d588ab6b9ace67757387dbb5963ae31ceb252
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17646
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In bootblock, cpu flex ratio is set to non-turbo max.
In FSP UPD, if CpuRatioOverride is zero, then it tries to program cpu
ratio to zero. Since it is different than the non-zero value programmed
in bootblock, FSP gives reset.
To avoid the reset, set FSP UPD for CPU flex ratio override to that
value as set in bootblock.
Change-Id: I8cae5530ec97cedfbd71771f291db6f55a9fd5c2
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17555
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP 2.0 implementation conditionally sets PMRR base based on
EnableC6Dram UPD. Therefore, handle the case of the PMRR base not being
set since FSP 2.0 changed behavior from FSP 1.1 implementation.
If prmrr base is non-zero value, then top_of_ram is prmrr base.
If Probeless trace is enabled, then deduct trace memory size from
calculated top_of_ram.
Change-Id: I2633bf78705e36b241668a313d215d0455fba607
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17554
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In FSP 2.0 the UPD to send extra VR Mailbox commands is switched from
SendVrMbxCmd to SendVrMbxCmd1. Use the same in silicon initialization.
Change-Id: I46bd50c9acc0456e2483f20ccb5e9ec2a0de232a
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/17578
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. Move existing IO decode range from pch_lpc_init to early
stage before SIO init.
2. At the same time, enable SIO decode range (0x2e/0x2f)
for platform which use super IO.
Change-Id: I72df16d0a784686d8cadfbee09b5aef60576ac43
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/17337
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Legacy PME are enabled by default in FSP UPD region.
When Legacy PME is enabled, then an SCI is generated and should be
handled by OS and BIOS/Coreboot in collboration. OS requires some
ACPI methods (eg _L69) which help to determine the wake source and also
to clear some registers. But this infrastructure is not present as of
now in coreboot and also linux handles PMEs natively.
Hence the SCI was never handled by OS and the status bits were never
cleared i.e., PCI_EXP_STS.
For this reason the level triggered SCI will remain active and the
system will wake up as soon as it enters S3.
To fix this, diabled Legacy PME (PmSci for Root ports).
Change-Id: I61317eb45305bdb14be3cc1a54fd9961d6ed593e
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17553
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Apollolake MRC cache is divided into two regions: constant and variable.
Currently they are clubbed together. Since variable data changes across
cold reboot it triggers invalidation of the whole cache region. This
change declubs the data, adds routines to load/store variable data on
flash.
BUG=chrome-os-partner:57515
TEST=with patch series applied: cold reboot, make sure MRC is not
updated. Do S3 suspend/resume cycle.
Change-Id: I374519777abe9b9a1e6cceae5318decd405bb527
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/17237
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Piggy-back on existing MRC cache infrastructure to store variable MRC data.
Only one set of data can be valid at given point of time. Currently this
magically happens because region alignment is forced to 0x1000 and region
itself is of the same size. This needs to be somehow programmatically
enforced.
Change-Id: I8a660d356ca760b8ff9907396fb9b34cb16cf1db
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/17320
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We found that sometimes the edp doesn't get the edid or that video
config fails on kevin after a reboot. Now we will retry 3 times to
initialize it if there are errors.
BRANCH=gru
BUG=chrome-os-partner:60150
TEST=reboot kevin, the edp initialization error is no longer seen.
Change-Id: I96e20e526294fbc856fbdffcbd63accdc7371ef6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 28c57a6e5b89c7b3a96204ec19a080067460544a
Original-Change-Id: I1382cdf4119fc4eeae5c2b36485030e3a38c2d91
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/412622
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17626
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Current implementation checks for CONFIG_BOOTBLOCK_CONSOLE and then
initializes UART. If only CONFIG_BOOTBLOCK_CONSOLE
is enabled without enabling CONFIG_UART_DEBUG, there are
compilation issues. This is the case when using SIO UART for Skylake
DT platform. Hence initialize UART when CONFIG_UART_DEBUG is enabled
and not based on CONFIG_BOOTBLOCK_CONSOLE.
Also move BOOTBLOCK_CONSOLE out from UART_DEBUG to CPU_SPECIFIC_OPTIONS
as part of the fix needed.
Change-Id: Id422a55a68d64a06fc874bddca46b0ef5be6d596
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/17349
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Asserts are only fatal if CONFIG_FATAL_ASSERTS is enabled in Kconfig.
By default this is disabled, so the assert is generally just a printf.
Die if someone decides to pass in an invalid bus number for some reason.
Addresses coverity issue 1349858 - Out-of-bounds read
Signed-off-by: Martin Roth <martinroth@google.com>
Change-Id: I9d79bc336cbbfde31f655cfd271f101e7a90ab1b
Reviewed-on: https://review.coreboot.org/17484
Reviewed-by: Nico Huber <nico.h@gmx.de>
The lb_serial structure had some new entries added, which were not being
filled in.
Fill in the values so they're not undefined.
Addresses coverity error 1354778 - Uninitialized scalar variable
Change-Id: Ia7ce07f6e4e058c91c2e063f3225497271ef93ff
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17482
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Define early smbus functions that can be used by mainboard to fetch spd.
Change-Id: Id170b2b8e6fb3ebb147f37bf433a27d1162dc11c
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17433
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
FPR is an attribute of the SPI flash component and not of the SPI bus
itself. Rename functions, file names and Kconfig option to make sure
this is conveyed correctly.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: I9f06f1a8ee28b8c56db64ddd6a19dd9179c54f50
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17560
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
flash_programmer_probe is a property of the spi flash driver and does
not belong in the spi_slave structure. Thus, make
spi_flash_programmer_probe a callback from the spi_flash_probe
function. Logic still remains the same as before (order matters):
1. Try spi_flash_programmer_probe without force option
2. Try generic flash probing
3. Try spi_flash_programmer_probe with force option
If none of the above steps work, fail probing. Flash controller is
expected to honor force option to decide whether to perform specialized
probing or to defer to generic probing.
BUG=None
BRANCH=None
TEST=Compiles successfully
Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
max_transfer_size is a property of the SPI controller and not of the spi
slave. Also, this is used only on one SoC currently. There is no need to
handle this at the spi flash layer.
This change moves the handling of max_transfer_size to SoC SPI driver
and gets rid of the max_transfer_size parameter.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: I19a1d0a83395a58c2bc1614b24518a3220945a60
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17463
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
RW flag was added to spi_slave structure to get around a requirement on
some AMD flash controllers that need to group together all spi volatile
operations (write/erase). This rw flag is not a property or attribute of
the SPI slave or controller. Thus, instead of saving it in spi_slave
structure, clean up the SPI flash driver interface. This allows
chipsets/mainboards (that require volatile operations to be grouped) to
indicate beginning and end of such grouped operations.
New user APIs are added to allow users to perform probe, read, write,
erase, volatile group begin and end operations. Callbacks defined in
spi_flash structure are expected to be used only by the SPI flash
driver. Any chipset that requires grouping of volatile operations can
select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and
define callbacks for chipset_volatile_group_{begin,end}.
spi_claim_bus/spi_release_bus calls have been removed from the SPI flash
chip drivers which end up calling do_spi_flash_cmd since it already has
required calls for claiming and releasing SPI bus before performing a
read/write operation.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17462
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT.
Platforms that remain to have explicit MMCONF_SUPPORT are
ones that should be converted.
Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17527
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Stage cache will save ~20ms on S3 resume for apollolake platforms.
Implementing the cache in ramstage to save silicon init and reload
it on resume. This patch adds passing S3 status to silicon init in
order to verify that the wake is from S3 and not for some other
reason. This patch also includes changes needed for quark and
skylake platforms that require fsp 2.0.
BUG=chrome-os-partner:56941
BRANCH=none
TEST=built for reef and tested boot and S3 resume path saving 20ms
Change-Id: I99dc93c1d7a7d5cf8d8de1aa253a326ec67f05f6
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/17460
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The wrong value was used for reporting an error when a requested
bus speed was made that isn't supported. Use the requested value.
Change-Id: I6c92ede3d95590d95a42b40422bab88ea9ae72a1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17474
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
If the SoC clock speed is not supported there is supposed to
be an error printed. However, the value printed was wrong which
was dereferencing a NULL struct. Fix that.
Change-Id: I5021ad8c1581d1935b39875ffa3aa00b594c537a
Found-by: Coverity Scan #1365977
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17468
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Align top of stack to 8 bytes, value documented as FSP1.1 requirement.
Also fix some cases of uintptr_t casted to unsigned long.
Change-Id: I5bbd100eeb673417da205a2c2c3410fef1af61f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17461
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This changes the 933 DPLL rate to 928 which has low jitter.
BRANCH=none
BUG=chrome-os-partner:57845
TEST=boot kevin and run
while true; do sleep 0.1; memtester 500K 1 > /dev/null; done
for several hours
Change-Id: I4d2a8871aaabe3b0a1a165c788af265c5f9e892c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 54ebf8763bb8193c4b36a5e86f0c625b176d31a6
Original-Change-Id: Iaa12bf67527b6d0e809657c513b8d1c66af25174
Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/404550
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17379
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The Kevin project has been too smooth and boring for our tastes in the
last last few weeks, so we've decided to stir the pot a little bit and
reshuffle all our PLL settings at the last minute. The new settings
match exactly what the Linux kernel expects on boot, so it doesn't need
to reinitialize anything and risk a glitch.
Naturally, changing PLL rates will affect child clocks, so this patch
changes vop_aclk (192MHz -> 200MHz, 400MHz in the kernel), pmu_pclk
(99MHz -> 96.57MHz) and i2c0_src (198MHz -> 338MHz, leading to an
effective I2C0 change 399193Hz -> 398584Hz).
BRANCH=gru
BUG=chrome-os-partner:59139
TEST=Booted Kevin, sanity checking display and beep. Instrumented
rockchip_rk3399_pll_set_params() in the kernel and confirmed that GPLL,
PPLL and CPLL do not get reinitialized anymore (with additional kernel
patch to ignore frac divider when it's not used). Also confirmed that
/sys/kernel/debug/clk_summary now shows pclk_pmu_src 96571429 because
the kernel doesn't even bother to reinitialize the divisor.
Change-Id: Ib44d872a7b7f177fb2e60ccc6992f888835365eb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9b82056037be5a5aebf146784ffb246780013c96
Original-Change-Id: Ie112104035b01166217a8c5b5586972b4d7ca6ec
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/405785
Original-Commit-Ready: Xing Zheng <zhengxing@rock-chips.com>
Original-Tested-by: Xing Zheng <zhengxing@rock-chips.com>
Original-Reviewed-by: Xing Zheng <zhengxing@rock-chips.com>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/17378
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The DDR speed Kconfig symbols needed to either be added to the Kconfig
tree, or have the code associated with them removed. I chose to add
the symbols.
- Add symbols for DDR333 - DDR667 to cygnus Kconfig. These should be
selected by the mainboard.
- Rename symbols from DDRXXX to CYGNUS_DDRXXX to match the existing
CYGNUS_DDR800 symbol.
- Rename the non Kconfig #define CONFIG_DRAM_FREQ to CYGNUS_DRAM_FREQ
because having other #defines look like Kconfig symbols is confusing.
- Change #ifdef CONFIG_DDRXXX to use IS_ENABLED
Change-Id: I3f5957a595072434c21af0002d57ac49b48b1e43
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Before the PcdeMMCBootMode in the Updatable Product Date was always
assigned and didn't take into account the + 1 increment for the default
define.
Now if the configuration indicates that the device tree should be
followed PcdeMMCBootMode is initially disabled. Else if configuration
isn't the default, assign the value with the + 1 increment substracted.
TEST=Intel/MinnowMax
Change-Id: I6755eb585d1afe3a15f83347fba834766eb44ad2
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: https://review.coreboot.org/10165
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Log the values of PcdEnableLpe and PcdeMMCBootMode even if they are
outside of the expected range.
TEST=Intel/MinnowMax
Change-Id: Ie0aea4287234b23d4e9852f3991dcc78ce8103d9
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: https://review.coreboot.org/10164
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
BIOS needs to ensure that SPI write does not cross 256-byte
boundary. Else, if the write is across 256-byte boundary, then it
corrupts the block by wrapping write to start of current block. Thus,
ensure nuclear_spi_{read,write} operate within a single 256-byte block
only at a time.
BUG=chrome-os-partner:59813
BRANCH=None
TEST=Verified that elog writes do not corrupt the event log when write
is across 256-byte blocks.
Change-Id: I854ca2979d65b9f1232f93182cb84d4dee4f4139
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The Kconfig symbol CONSOLE_SERIAL_TEGRA210_UART_CHOICES was attached to
a choice, and isn't used anywhere. Remove it as unnecessary.
Change-Id: I4efd2e43ac34b266db0d40d1bc8c123bd377b3a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17391
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds punit initialization code after
FspMemoryInit so that turbo can be initialized after
that.
BUG=chrome-os-partner:58158
BRANCH=None
Change-Id: I4939da47da82b9a728cf1b5cf6d5ec54b4f5b31d
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/17203
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To avoid garbage display in firmware on warm reset, we need
to enable eDP display in depthcharge instead when the framebuffer is
cleared.
Therefore limit edp_enable() in coreboot to just configure eDP,
and leave enabling the display to depthcharge.
CQ-DEPEND=CL:402071
BUG=chrome-os-partner:58675
BRANCH=none
TEST=Boot from kevin, and display work
Change-Id: I9d937ead33ebba58e33e02fd73b80d6e11bb69aa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 38b0d18c3fae37dfccb18fe809f763b98703167c
Original-Change-Id: Ibbc283a5892b98f4922f02fd67465fe2e1d01b71
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/402095
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17207
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This patch reduces the thermal time window to 100 milliseconds
for fast throttling action at prochot.
BUG=chrome-os-partner:59397
BRANCH=None.
TEST=Built for skylake platform and verified the thermal time
window value.
Change-Id: If79d213cb8e19277ffdb882267d2f8672df93446
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/17384
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If the boot media is memory mapped temporarily mark it as write
protect MTRR type so that memory-mapped accesses are faster.
Depthcharge payload loading was sped up by 75ms using this.
BUG=chrome-os-partner:56656,chrome-os-partner:59682
Change-Id: Iba87a51a05559d81b8e00fa4f6824dacf7a661f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17372
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The default register count calculations are leading to higher
frequencies than expected. Provide an alternative method for
calculating the register counts by utilizing the rise and
fall times of the bus. If the rise time is supplied the
rise/fall time values are used, but the register overrides
take precedence over the rise/fall time calculation. This
allows platforms to choose whichever method works the best.
BUG=chrome-os-partner:58889
Change-Id: I7747613ce51d8151848acd916c09ae97bfc4b86a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17350
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
The apollolake and skylake had duplicate stanzas of code for
initializing the i2c buses. Additionally, they also had very
similar structures for providing settings for the i2c speed
control. Introduce a new struct lpss_i2c_bus_config and
utilize it in both apollolake and skylake thereby removing
the need for SoC-specific structres. The new structure is
used for initializing a bus fully as the lpss i2c API is
simplified in that lpss_i2c_init() is only required to be
called. The struct lpss_i2c_bus_config structure is passed
in for both initializing and filling in the SSDT information.
The formerly exposed functions are made static to reduce the
external API exposure.
BUG=chrome-os-partner:58889
Change-Id: Ib4fa8a7a4de052da75c778a7658741a5a8e0e6b9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17348
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
In preparation of merging the lpss i2c config structures on
apollolake and skylake move the i2c voltage variable to its
own field. It makes refactoring things easier, and then there's
no reason for a separate SoC specific i2c config structure.
BUG=chrome-os-partner:58889
Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17347
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
1. Re-factor MRC cache driver to properly select RW_MRC_CACHE or
RECOVERY_MRC_CACHE based on the boot mode.
- If normal mode boot, use RW_MRC_CACHE, if available.
- If recovery mode boot:
- Retrain memory if RECOVERY_MRC_CACHE not present, or recovery is
requested explicity with retrain memory request.
- Use RECOVERY_MRC_CACHE otherwise.
2. Protect RW and RECOVERY mrc caches in recovery and non-recovery boot
modes. Check if both are present under one unified region and protect
that region as a whole. Else try protecting individual regions.
3. Update training data in appropriate cache:
- Use RW_MRC_CACHE if normal mode.
- Use RECOVERY_MRC_CACHE if present in recovery mode. Else use
RW_MRC_CACHE.
4. Add proper debug logs to indicate which training data cache is used
at any point.
BUG=chrome-os-partner:59352
BRANCH=None
TEST=Verified that correct cache is used in both normal and recovery
mode on reef.
Change-Id: Ie79737a1450bd1ff71543e44a5a3e16950e70fb3
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17242
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
chip.h has a config array PcieRpClkReqNumber which corresponds
to a FSP UPD parameter, the size is currently set to 20.
However the size of PcieRpClkReqNumber UPD in FSP2.0 is 24,
so memcpy (config buffer to UPD buffer) in chip_fsp20.c will read
beyond the bounds of config array.
Hence set the size of PcieRpClkReqNumber array based on the FSP in use.
Found-by: Coverity Scan #1365385, #1365386
Change-Id: I937f68ef33f218cd7f9ba5cf3baaec162bca3fc8
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/17292
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch updates below info,
[1] Delete the DPTF_CPU_ACTIVE_AC* values because these are not
being used. Hence, removing unnecessary defines.
[2] Add new DPTF_TSR0_ACTIVE_AC* temperature trip points for TSR0
external thermal sensor. These trip points are being used by _ACx
methods to control the fan speed on Skylake-U fan based Lars and
Kunimitsu platforms.
[3] Follow up patches are using DPTF_CPU_ACTIVE_AC* temperature trip
points in board specific acpi/dptf.asl (for lars, kunimitsu, etc) to
control the fan speed as per the CPU temperature trip points.
[4] Newly added _ACx methods for thermal sensor TSR0 in this patch
has nothing to do with DPTF_CPU_ACTIVE_AC*.
We can control fan speed using various different thermal sensors.
In this patch, we have added new _ACx methods for TSR0 thermal sensor.
We run the fan at different speeds to cool down the system at different
TSR0 temperatures.
Similarly, we considered CPU sensor temperature values and ran the fan
at different speeds to cool down the system.
BUG=chrome-os-partner:51025
BRANCH=firmware-glados-7820.B
TEST=Built and booted on kunimitsu and lars EVT boards.
Verified these _ACx methods with _ART table on these boards
with different workloads.
Change-Id: Ia7b81e03da936c4a0f69057e43f18efd7c3b9f17
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/332368
Reviewed-on: https://review.coreboot.org/17067
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When doing long transcations on an I2C bus at standard speed we saw
that long transactions could go over the 4ms limit while waiting for
it to complete on the bus.
Increase this so we can use standard speed for testing and debug in
firmware. (as there is no way to force standard speed in the kernel)
BUG=chrome-os-partner:58666
TEST=boot eve board with cr50 TPM and I2C bus at 100khz
Change-Id: I2987ae6a5aa024b373eb088767194c70b0918b6f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17213
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When reading+clearing a GPE for use as an interrupt we need to
re-read the status register and keep setting the clear bit until
it actually reads back clear. Also add a 1ms timeout in case the
status never clears.
This is needed if a device sends a longer interrupt pulse and it
is still asserted when the "ISR" goes to clear the status.
BUG=chrome-os-partner:59299
TEST=test cr50 TPM with 20us pulse to ensure it can successfully
communicate with the TPM and does not get confused due to seeing
interrupts that it should not.
Change-Id: I384f484a1728038d3a355586146deee089b22dd9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17212
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
A dedicated pmc_ipc DSDT entry is required for pmc_ipc kernel driver.
The ACPI mode entry includes resources for PMC_IPC1, SRAM, ACPI IO and
Punit Mailbox.
BRANCH=None
BUG=chrome-os-partner:57364
TEST=Boot up into OS successfully and check with dmesg to see the
driver has been loaded successfully without errors.
Change-Id: Ib0a300febe1e7fc1796bfeca1a04493f932640e1
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/17181
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
SATA device remains unrecognized if connected at Port 2.
Port control and Status register (PCS) is by default set by
hardware to the disabled state as a result of an initial
power on reset. OS read PCS register during boot causes
disabling of SATA ports and can't detect any devices.
BRANCH=none
BUG=chrome-os-partner:59335
TEST=Build and boot SKL from SATA device connected at Port 2.
Change-Id: I4866ca44567f5024edaca2d48098af5b4c67a7ac
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/17229
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Avoid use of Local0 variable in TEVT acpi method.
If mainboard doesn't expose any thermal sensor, then warning is
generated for variable Local0 not been used.
Change-Id: I0634961a01144e41a8480c8c6ed8b7fdd358e768
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17245
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add device id for PCH-Y used in Kaby Lake RVP3 board.
Change-Id: I9235265cf88e4d044e7216f53e6da7021fb68238
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17244
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Log when the MRC cache is attempted to be updated with status
of success or failure. Just one slot is supported currently
which is deemed 'normal'. This is because there are more slots
anticipated in the future.
BUG=chrome-os-partner:59395
Change-Id: I0f81458325697aff9924cc359a4173e0d35da5da
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17231
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Fix msch ddrconfig register write error. Also make sure that the row
number configured in msch is equal to the row number configured in the
DDR controller.
This would not affect systems with 4GB of memory, but is needed
for 2GB configurations.
BUG=None
BRANCH=None
TEST=Boot from kevin
Change-Id: Ic95b3371faec5b31c32b011c50e55e83d949e74d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dfa43d3d44839d9685b6393157f51b646e9996de
Original-Change-Id: I0c95378bf937a245b7cdc0583c5d2ed1347f2a3e
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/399563
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17208
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This was a dummy implementation until now which returned -1 always. Add
support for reading SPI flash status register (srp0).
BUG=chrome-os-partner:59267
BRANCH=None
TEST=Verified by enabling and disabling write-protect on reef that the
value of SRP0 changes accordingly in status register read.
Change-Id: Ib1349605dd87c4a087e416f52a8256b1eaac4f4c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17205
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Monitor/Mwait is broken on APL. So, it needs to be disabled.
BUG=chrome-os-partner:56922
BRANCH=None
Change-Id: I12cd4280de62e0a639b43538171660ee4c0a0265
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/17200
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
framebuffer address is dynamically chosen by libpayload now, so there's
no need to configure it in coreboot.
CQ-DEPEND=CL:401402
BUG=chrome-os-partner:58675
BRANCH=none
TEST=Boot from kevin, dev screen is visible
Change-Id: I9f1e581d5c63b3579b26be22ce5c8d1e71679f6f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b3b6675420592c30e1e0abc8f8e9dd6ed5abd04c
Original-Change-Id: I7e3162f24a4dc426fe4e10d74865cf0042c80db5
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/401401
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17109
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Near the end of DDR initialization, the system switches to the index1
configuration. Sometimes this failed and a status bit that coreboot was
waiting for was never set, hanging the system.
Instead, give the system 100ms to reach the new configuration or reboot
it, which generally fixes the issue. Also reset when training the index1
configuration fails.
BUG=chrome-os-partner:57988
BRANCH=None
TEST=The error condition now leads to a reboot of coreboot which
recovers the system, instead of hanging.
Change-Id: Icb4270369102ff7a4ce91b0677e04b4eb10f1204
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca250d0628ea3b6b39d5131246eaba68637c5140
Original-Change-Id: Id6e8936d90e54b733ac327f8476d744b45639232
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/399681
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17106
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
1. Update write leveling value to 0x200.
When the wrdqs slave delay is changed to 0x200, the phase between the
dqs and the clock is 0 degrees. The pcb layout can make sure the tDQSS
timing is smaller than 0.25tck, so this value is useful for both higher
and lower frequencies.
2. Disable read leveling for LPDDR3.
The read leveling result is unreliable - the value is not in the middle
of the read eye. To fix this, disable read leveling and fix the read
DQSn slave delay setting for DQn to 0x080 (1/4 cycle delay of the
input signal).
BUG=None
BRANCH=None
TEST=Boot from kevin; Check by shmoo read eye and stability test, that
the updated value of 0x80 is better.
Change-Id: Ia72b601d9bf4e34ba1b0b4584b2c5c3ce9dafbd4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37e8dfe783db3ce71aa026b4609ed0bfa16db06f
Original-Change-Id: I2a5d40c0348449b2a7c609c1db65da4ed5f1c09f
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Jeff Chen <cym@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/396598
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/17105
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
To enable DDR Dynamic Voltage and Frequency Scaling (DVFS) we need to
train alternative configurations first, so do the training and store the
values.
BUG=None
BRANCH=None
TEST=Boot from kevin
Change-Id: I944a4b297a4ed6966893aa09553da88171307a42
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94533ff3ba21bcb0ace00bedcf0cebb89a341be2
Original-Change-Id: I4a98bc0db5553d154fedb657e35b926a92aa80c7
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/386596
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17104
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Testing for "devfn < 0" on an unsigned doesn't work, and i2c_bus_to_devfn
returns an int (with -1 for "error"), so use int for devfn.
Adapt Change-Id I7d1cdb6af4140f7dc322141c0c018d8418627434 to fix more
instances.
Change-Id: I001a9b484a68e018798a65c0fae11f8df7d9f564
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1357450, #1357449
Reviewed-on: https://review.coreboot.org/17054
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Some of our RK3399 devices have panel resolutions as high as 2400x1600.
With 16bpp that barely still fit into an 8MB framebuffer, but then we
changed it to 32bpp for better image quality...
Note that this is a band-aid. Coreboot-allocated framebuffers shouldn't
be used at all on ARM64 devices, since libpayload is perfectly capable
to dynamically allocate it with the right size based on EDID-information
on this architecture. That will require some more elaborate work to be
fixed with later patches.
BRANCH=gru
BUG=chrome-os-partner:58044
TEST=Warm-reboot Kevin on the dev screen, confirm that you don't see the
lower half of the screen that overflowed our allocated framebuffer
preserved from the last boot as soon as the backlight turns on.
Change-Id: I00a63cfef35a8ee734543abbdb298344fb529283
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d2718efcacb50371624d9f6a3b586c298e8c2fec
Original-Change-Id: Ia1fa28971c65d7d0639966e715f742309245172b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/399966
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/17108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
All current implementations of ramstage_cache_invalid() were just
resetting the system based on the RESET_ON_INVALID_RAMSTAGE_CACHE
Kconfig option. Move that behavior to a single implementation
within prog_loaders.c which removes duplication.
Change-Id: I67aae73f9e1305732f90d947fe57c5aaf66ada9e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17184
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
ramstage_cache_invalid which was added in
I83fe76957c061f20e9afb308e55923806fda4f93 (review.coreboot.org/#/c/17112)
requires hard_reset to be defined in postcar stage.
BUG=None
BRANCH=None
TEST=Compiles successfully for reef.
Change-Id: I283277c373259e0e2dfe72e3c889ceea012544f2
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17182
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
While using '3' is fine for the standard gpe0 for skylake, I want
to make sure anyone that copies this code doesn't tweak GPE0_REG_MAX
without the hard coded index. If that does happen now things will
still work, but it may just not match the hardware proper.
BUG=chrome-os-partner:58666
Change-Id: I434b9a765a0a2f263490bb2b4ecb3635292d46c9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17160
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add a GPIO macro that allows a pin to be routed to the APIC with
the input inverted. This allows a normal interrupt to get used as
a GPE during firmware and still be used as a perhiperal interrupt
in the kernel.
BUG=chrome-os-partner:58666
TEST=boot en eve and use TPM IRQ in firmware and OS
Change-Id: I77f727f749fdd5281ff595a9237fe1e634daba96
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17176
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add the necessary infrastructure to support eSPI SMI events,
and a mainboard handler to pass control to the EC.
BUG=chrome-os-partner:58666
TEST=tested on eve board with eSPI enabled, verified that lid
close event from the EC during firmware will result in an SMI
and shut down the system.
Change-Id: I6367e233e070a8fca053a7bdd2534c0578d15d12
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17134
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Export the pmc_gpe_init() function from pmc.c to pmutil.c
so it can be used in bootblock, and then call it from there
to initialize any GPEs for use in firmware.
BUG=chrome-os-partner:58666
TEST=test working GPE as TPM interrupt on skylake board
Change-Id: I6b4f7d0aa689db42dc455075f84ab5694e8c9661
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17135
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add the SOC definition for acpi_get_gpe() so it can be used
by the I2C TPM driver. Also add the I2C support code to
verstage so it can get used by vboot.
BUG=chrome-os-partner:58666
TEST=boot with I2C TPM on skylake board
Change-Id: I553f00a6ec25955ecc18a7616d9c3e1e7cbbb8ca
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17136
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The Deep S3 state will lose a lot of register contents that we
used to rely on for determining wake source.
In order to make use of this override the enable bit for wake
sources that are enabled for Deep S3 in devicetree.cb.
BUG=chrome-os-partner:58666
TEST=check for _SWS reporting wake source on S3 resume on skylake
Change-Id: If5113d6890f6cbecc32f92af67a29952266fe0ac
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17137
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Remove the FADT from the individual mainboards and select and
use COMMON_FADT in the SOC instead. Set the ACPI revision to 5.
Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17138
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Three things are required to enable wake-on-usb:
1. 5V to USB ports should be enabled in S3.
2. ASL file needs to have appropriate wake bit set.
3. XHCI controller should have the wake on attach/detach bit set for the
corresponding port in PORTSCN register.
Only part missing was #3.
This CL adds support to allow mainboard to define a bitmap in
devicetree corresponding to the ports that it wants to enable
wake-on-usb feature. Based on the bitmap, wake on attach/detach bits in
PORTSCN would be set by xhci.asl for the appropriate ports.
BUG=chrome-os-partner:58734
BRANCH=None
TEST=Verified that with port 5 enabled, chell wakes up from S3 on usb
attach/detach.
Change-Id: I40a22a450e52f74a0ab93ebb8170555d834ebdaf
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17056
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Use intel common infrastructure to enable support for write-protecting
SPI flash range. Also, enable this protection for RW_MRC_CACHE.
BUG=chrome-os-partner:58896
TEST=Verified that write to RW_MRC_CACHE fails in OS using
"flashrom -p host -i RW_MRC_CACHE -w /tmp/test.bin"
Change-Id: I35df12bc295d141e314ec2cb092d904842432394
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Write-protect SPI flash range provided by caller by using a free Flash
Protected Range (FPR) register. This expects SoC to define a callback
for providing information about the first FPR register address and
maximum number of FPRs supported.
BUG=chrome-os-partner:58896
Change-Id: I4e34ede8784e5587a5e08ffa10e20d2d14e20add
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17115
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
We found sdram may fail in pctl_cfg(), so we check the status in this
function. If it exceeds 100ms still in this function, we will restart
the system. We also found there are rare chances DDR training fails,
so also restart system in that case.
BUG=chrome-os-partner:57988
BRANCH=None
TEST=coreboot resets on failure and eventually the system comes up
Change-Id: Icc0688da028a8f4f81eafe36bbaa79fdf2bcea74
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 89e45f8352f62e19a203316330aba14ccc5c8b11
Original-Change-Id: If4e78983abcfdfe1e0e26847448d86169e598700
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/397439
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17045
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Implement GPIO ACPI AML generating functions that can be called by
coreboot drivers to generate GPIO manipulation code in AML. Following
functions are implemented:
1. acpigen_soc_read_rx_gpio
2. acpigen_soc_get_tx_gpio
3. acpigen_soc_set_tx_gpio
4. acpigen_soc_clear_tx_gpio
BUG=chrome-os-partner:55988
Change-Id: I3d8695d73a1c43555032de90f14ee47ccee45559
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17082
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This patch adds a Makefile rule for mvmap2315 to install a BDB and
bootblock code in the BOOTBLOCK region. The resulting BDB has a
header and data both signed by a RSA-4096 key.
BUG=chrome-os-partner:57889
BRANCH=none
TEST=emerge-rotor coreboot and examined the output binary. Booted
coreboot.rom.
Change-Id: I1e20a09b12f8f8ed4d095aa588e3eb930f359fc5
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/16747
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
While we stub out free(), tools like coverity scan have no idea, and it
might change in the future. So free it.
Change-Id: I1d93a6f45b64445662daa95b51128140ad0a87e2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1260716
Reviewed-on: https://review.coreboot.org/17055
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
This refactoring was already carried into RK3288 with commit 6911219
(edid: Add helper function to calculate bits-per-pixel dependent values)
but it seems that the code for RK3399 was copy&pasted from it too early
to pick this up. Fix that so that future Rockchip SoCs can copy&paste
the right thing.
Change-Id: I5050c58d18db38fffabc7666e67a622d4a828590
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17050
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Skip FSP initiated core/MP init as it is implemented and initiated
in coreboot.
Add soc core init to set up the following feature MSRs:
1. C-states
2. IO/Mwait redirection
BUG=chrome-os-partner:56922
BRANCH=None
TEST= Check C-state functioning using 'powertop'. Check 0xE2 and
0xE4 MSR to verify IO/Mwait redirection.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I97c3d82f654be30a0d2d88cb68c8212af3d6f767
Reviewed-on: https://review.coreboot.org/16587
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch sets the package power limit (PL1) value in RAPL MSR
and disables MMIO register. Added configurable PL1 override
parameter to leverage full TDP capacity.
BUG=chrome-os-partner:56922
TEST=webGL performance(fps) not impacted before and after S3.
Change-Id: I34208048a6d4a127e9b1267d2df043cb2c46cf77
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/16884
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In FSP1.1 all the platform resets including global was handled
on its own without any intervention from coreboot.
In FSP2.0, any reset required will be notified to coreboot
and it is expected that coreboot will perform platform reset.
Hence, implement platform global reset hooks in coreboot. If Intel
ME is in non ERROR state then MEI message will able to perform
global reset else force global reset by writing 0x6 or 0xE to
0xCF9 port with PCH ETR3 register bit [20] set.
BUG=none
BRANCH=none
TEST=Verified platform global reset is working with MEI
message or writing to PCH ETR3.
Change-Id: I57e55caa6d20b15644bac686be8734d9652f21e5
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16903
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
As per ME BWG, there are two mechanism to generate a Global
Reset (resets both host and Intel ME), one is through CF9h
IO write of 6h or Eh with "CF9h Global Reset" (CF9GR) bit set,
PMC PCI offset ACh[20]. Another is to issue the Global Reset
MEI message. Because any attempts to cause global reset without
synchronizing the two sides might cause unwanted side effects,
such as unwritten flash data that will get destroyed if the
host were to cause a global reset without informing Intel ME
firmware, the recommended method is to send a Global Reset MEI
message when the following conditions are met:
The PCH chipset firmware just needs to complete the Intel ME
Interface #1 initialization and check the Intel ME HFSTS state
if Intel ME is not in ERROR state and is accepting MEI commands
then firmware should be able to use Global Reset MEI message to
trigger global reset.
Furthermore, if Intel ME is in ERROR state, BIOS can use I/O 0xCF9
write of 0x06 or 0x0E command with PCH ETR3 register bit [20]
to perform the global reset.
BUG=none
BRANCH=none
TEST=Verified Global Reset MEI message is able to perform platform
global issue in ME good state.
Change-Id: If326a137eeadaa695668b76b84c510e12c546024
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16902
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch programs and enables BAR for ME (bus:0/
device:0x16/function:0) device to have early ME communication.
BUG=none
BRANCH=none
TEST=Verified Global Reset MEI message can able to perform platform
global reset during romstage.
Change-Id: I99ce0ccd42610112a361a48ba31168c9feaa0332
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/17016
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
VBOOT_EC_SLOW_UPDATE should be selected if EC_GOOGLE_CHROMEEC is used as
building coreboot with Chrome OS support & without Chrome EC gives a
build error in coreboot.
Change-Id: I77eed0e1bdc1ba49381b72e21b0e18f573cadff0
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17020
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The clearing of the PMC registers was not being called resulting
in state persisting across reboots. This state is queried and
events are added to the eventlog like 'RTC reset' events. However,
the RTC reset event is a one time thing so it should only be logged
once. Without the clearing of the state the event was logged on
every boot.
BUG=chrome-os-partner:58496
Change-Id: I60aa7102977c2b1775ab8c54d1c147737d2af5e2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17027
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When timestamp is enabled, the system hangs because the timestamp data
is not yet available. Add a temporary work around that starts the
timestamp after the FspInit() making this data available.
Verified on Intel Camelback Mountain CRB and ensured that system can
boot to payload with timpstamp feature enabled.
Change-Id: I59c4bb83ae7e166cceca34988d5a392e5a831afa
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: https://review.coreboot.org/16894
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The enforced FSP 1.0 APIs call was used to work around an fsp1.0 driver
issue. As the issue has been addressed in fsp1.0 driver (Change 9780),
remove the enforced workaround. Otherwise will see error message
'FSP API NotifyPhase failed' in serial log.
Verified on Intel Camelback Mountain CRB and confirmed that the serial
log error message regarding the 'FSP API NotifyPhase failed' is gone.
Change-Id: Iafa1d22e2476769fd841a3ebaa1ab4f9713c6c39
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: https://review.coreboot.org/16892
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Aaron Durbin