Added macro named PAD_CFG_GPI_GPIO_DRIVER_SCI, for pads that need to be
configured as GPI, GPIO Driver mode, and SCI interrupt.
Also remove PAD_IRQ_CFG_DUAL_ROUTE macro (subsumed by
PAD_CFG_GPI_IRQ_WAKE).
BUG=none
BRANCH=none
TEST=Compiles
Change-Id: I0332c64e2fa62ce29c772444606adbfdf9c9afc4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32485
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change removes all the separate entrypoint dispatch
functions as they all share the same pattern.
Furthermore, none of the function definitions under vendorcode
binaryPI/AGESA.c file have proper declarations, the ones compiler
picks up from AGESA.h are for the internal implementations and
with sanely organized headerfiles would not be exposed outside
the build of AGESA at all.
Change-Id: I0b72badc007565740c93b58743cfd048e8b42775
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31485
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Due to PCB limitations the SD-Card interface is not able to operate
with the highest frequency reliably. The OS driver will switch to
the highest mode if a SD-Card is attached which supports this high
frequency mode. In order to work around this PCB limitation disable the
high frequency modes in the controller capabilities (SDR104 and HS400
mode) and leave SDR50 and DDR50 enabled.
Change-Id: Ia5fed5fb70b027de34170b49620927614a00fb7a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The entry for drivers/intel/fsp1_0/Kconfig was added under the
chipset menu before addtional FSP versions were added, and the
drivers/*/*/Kconfig entry added to support them. This results
in the fsp1_0 Kconfig items being duplicated in the Chipset and
Generic Drivers menus.
Remove the chipset entry since it's no longer needed.
Test: select FSP 1.0 mainboard (e.g. intel/minnowmax) in menuconfig,
observe FSP 1.0 Kconfig entries listed only under Generic Drivers menu.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: If1e78fb9259b1a46d308db829881eb3b3d17cf40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32565
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IASL reports warning 'Control Method should be made Serialized'.
Change _CRS method to Serialized.
BUG=N/A
TEST=Build Google Banon and Google Cyan
Change-Id: Iffa097a2100cfa91efa3b617311500b83f839bce
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
CB acts as I/O handler for QCLib (e.g. DDR training data)
This interface allows bi-directional data flow between
CB and QCLib
Tested and working interfaces:
DDR Training data
QCLib serial console output
DDR Information (base & size)
limits cfg data
TEST=build & run
Change-Id: I073186674a1a593547d1ee1d15c7cd4fd8ad5bc1
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
TEST=build & run
Change-Id: I222a56f1c9b74856a1e1ff8132bab5e041672c5d
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25207
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that support has been added for using the public FSP
repo for Braswell platform, clean up Kconfig options and
set sane defaults when using it.
The following changes have been made:
- add option to use the 3rdparty/fsp repo for Braswell platform
- reorder FSP 1.1 Kconfig entries for improved flow/readability
- set the default path for the FSP binary based on use of FSP
repo and platform
- set the CBFS location for the FSP binary based on platform
Change-Id: Ie2f732bf0ac4d4551908caa56360b8bb2869b4c7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The current Braswell FSP 1.1 header in vendorcode/intel, for
which there is no publicly available FSP binary, contains silicon
init UPDs which are not found in the publicly available header/binary
in the FSP Github repo. This prevents new boards from being added
which use the public Braswell FSP header/binary.
To resolve this, move the UPDs not found in the public header from
the soc's chip.c to ramstage.c for the boards which use them. Add
a Kconfig option to use the current non-public FSP header and
select it for boards which need it (google/cyan variants); set the
public FSP option as the default. Use the Kconfig option to set
FSP_HEADER_PATH to ensure the correct header is used.
Test: build google/cyan and intel/strago using non-public and
public FSP header/binaries respectively.
Change-Id: I43cf18b98c844175a87b61fdbe4b0b24484e5702
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Rather than selectively update the fsp submodule based on
FSP version or platform selection, update it when building
for any FSP-enabled platform, so all have latest version available.
Change-Id: If07d55828a1863623e04a4ecdd1514c3cb6d9c11
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Enable acoustic noise mitgation for arcada platform,
the slow slew rates for Ia and Gt are fast time dived by 8.
BUG=b:131144464
TEST=waveform test and hardware validation result pass.
Signed-off-by: nathan chen <nathan_chen@wistron.corp-partner.google.com>
Change-Id: I395b2fc527705ab207325cfd7147e6af5f300fce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Main objective for this change is to export the bluetooth reset
gpio to the kernel for use in an rf-kill operation.
To do so, we enable USB acpi and define all of the USB2 devices,
which includes bluetooth's reset gpio information.
BUG=b:122540489
BRANCH=None
TEST=emerge-atlas coreboot chromeos-bootimage
$cat sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dat &
retrieve ssdt.dat from DUT &
$iasl -d ./ssdt.dat & check the HS03 node is with "reset-gpio"
under _DSD object
Change-Id: I411ef707782655361bd1b8ac2b914b8ae64defeb
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Caveh Jalali <caveh@google.com>
This patch adds code to initialize two USB DWC3.0 controllers
and its associated QUSB V2 10nm PHYs to the SDM845 SOC, and uses them to
initialize USB3.0 on the cheza mainboard.
Synopsis controller initialization and configuration sequences taken from
USB 3.0 HPG chapter 2.2 and refer PHY HPG chapter 10.2 for QUSB phy
programming.
Includes Super speed mode support.
TEST=USB keypad and mass-storage device enumeration tested with this patch
Change-Id: I475a7757239acb8ef22a4d61afd59b304a7f0acc
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I38d086c379a3c2f54d1603a2fed5b33860f7f4d7
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: Idebbbd89de05d949e6f953aa49d8662d64383d1a
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This implementation corrects the GPE DWx mapping for GPIO groups.
The assignments is done in GPIO MISCFG register for all GPIO communities.
And configures the which GPIO communities get register as Tier1.
Change-Id: I9c306d46e5194944def26c24cdb95f5ebada42b8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
This patch ports CB:32275 changes from CNL to ICL.
Ice Lake require that FSP-M component should be
XIP. This change selects FSP_M_XIP so that the right arguments are
passed into cbfstool when adding this component.
Change-Id: Icc5550f1f94957fa1b28c8bba6fc0efee98e233e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32507
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ports CB:31787 and CB:31908 changes from CNL to ICL.
This change moves soc_fill_power_state and soc_prev_sleep_state to
pmutil.c. It allows the functions to be used across romstage and smm.
Also fix GEN_PMCON bit checks as below:
ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
Change-Id: Ib7ab95b7bbcc97a076d27a11db2105f7b976b521
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32506
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ports CB:30718 and CB:31908 changes from CNL to ICL.
Add logging of chipset events on boot into the flash event log.
This was tested on a google/dragonegg board to ensure that events
like "System Reset" are added to the log as expected.
Also fix GEN_PMCON bit checks as below:
ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
Change-Id: I25ec32e81f8801f8d5e69c6095ffed73d75dded6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
This patch ports CB:31902 changes from CNL to ICL.
The prev_sleep_state value was showing 5 even after warm reboot, once the
SUS_PWR_FLR bit is being set. This bit was not being cleared.
Hence clearing the PMCON status bits.
Change-Id: Ia07aa17b4491216a277c36edfe6ed2aa489287c6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32503
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 351e3e5 ("src: Use include <console/console.h> when appropriate")
has broken the build here, see below, so we include console.h here again.
In file included from src/device/oprom/x86emu/x86emui.h:65,
from src/device/oprom/x86emu/debug.c:40:
src/device/oprom/x86emu/debug.c: In function 'x86emu_dump_regs':
src/device/oprom/x86emu/debug.h:46:22: error: implicit declaration of function 'printk'; did you mean 'printf'?
[-Werror=implicit-function-declaration]
#define printf(x...) printk(BIOS_DEBUG, x)
^~~~~~
src/device/oprom/x86emu/debug.c:366:5: note: in expansion of macro 'printf'
printf("\tAX=%04x ", M.x86.R_AX );
^~~~~~
Fixes: 351e3e5 ("src: Use include <console/console.h> when appropriate")
Change-Id: I75d0b7c08bfa6dcb07778bbb762223b62cfc3da7
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Chromebook doesn't require support wake on LAN in S5.
Disable it by default for power saving.
BUG=b:131571666
TEST= check LAN indicator is off under S5
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia90c9d2f3ea9b3580e9a7bbfb47c917dd51e3c03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
a 1M CBFS size is inadequate when adding the FSP binary to
image due to default FSP location in CBFS, so bump to 2M
to ensure autobuilds succeed.
Change-Id: I0683bea43cc71fad32bc42bfbd72f3913256d53c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
For GPIO pads that are configured as no-connect (PAD_NC), setting it
as GPI (with Rx enabled) leads to GPE0_STS being set
incorrectly. Though this is not an issue in practice (GPE0_EN is not
set, so no events triggered), it can confuse users when debugging GPE
related issues.
This change configures PAD_NC to have Rx disabled along with Tx to
ensure that it does not end up setting GPE0_STS bits for unwanted
GPIO pads.
P.S.: IOSSTATE config does not have a TxDRxD setting, so leaving that
configuration as is.
BUG=b:129235068
TEST=Verified that GPE0_STS bits are not set for pads that are marked
as PAD_NC.
Change-Id: I726cc7b86a94e7449352cd8a8806d4d775c593dc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Add more registers and make them optional, so they keep untouched/
their default if omitted.
Change-Id: I5d8008176d2972976b387c558658b8e70b50af8e
Signed-off-by: Max Blau <tripleshiftone@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Increase ramstage to 2M, required to actually embed the 7.2mb uImage
into the coreboot.rom, increase the postram cbfs cache in order for the
fit image to be loadable (without this increase the fit payload is found
but not loaded)
Change-Id: Iee0ed9f7958588ceda54bb32253c84cac68abea2
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The name OPROM is somewhat inaccurate, since other steps to bring
up display and graphics are needed depending on mainboard/SoC.
This patch cleans up OPROM code nomenclature, and works towards
the goal of deprecating vboot1:
* Rename CONFIG_VBOOT_OPROM_MATTERS to
CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig
description
* Remove function vboot_handoff_skip_display_init
* Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY
* Add |flags| field to vboot_working_data struct
* Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff
BUG=b:124141368, b:124192753, chromium:948529
TEST=make clean && make test-abuild
TEST=build and flash eve device; attempt loading dev/rec modes
BRANCH=none
Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Patch corrects IRQ and GPIO configuration for RT5682 codec's Jack INT.
Switching IOAPIC to GpioInt because ACPI Interrupt() doesn't support
jack triggering on both edges.
BUG=b:130180492
TEST=build and boot on a CML EVT board.
Use evtest & verify headset jack detection functions as expected.
Change-Id: Ia9bf8d554b54554f9ac1e78fd44a508964c8a14d
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Suggested-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32474
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Trusted Firmware places some components in SRAM on RK3399 and therefore
restricts accesses to SRAM to the secure world. This makes the vboot
working data inaccessible to normal world payloads, so we need to
migrate it into CBMEM.
Change-Id: Ic7c95790f2f118ccbdd897550f13b5f987bdd831
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Implement mt_pll_raise_ca53_freq() in MT8183 to raise the CPU frequency.
Move the function declaration to common header.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: Ide8d767486d68177fa2bfbcc5b559879eca1bcda
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
With the default CPU voltage (0.8v), CPU frequency should be 1417Mhz at
most. We have to raise CPU frequency to 1989MHz after increasing CPU
voltage to 1.05v in romstage.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: I4c3e0fa27ccda8e0efe422b6ab503a1efb1697e9
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
NEED_VB20_INTERNALS should always be specified when peeking
into vboot internal data structures.
BUG=b:124141368, chromium:956474
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I5a47a28350fd5a68efeff0d06ca150c1ae145412
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Disable the GBB flag forcing manual recovery now that we can read
the manual recovery from H1.
Enable the GBB flag to skip EC software sync, since images built
from coreboot.org do not include the EC binaries by default.
Change-Id: I0e1d6304e3e29eda68c7b807cf0774275c37d710
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tim Wawrzynczak