This patch removes setting of gpio_tier1_sci_en from mainboard
smihandler code. Gpio_tier1_sci enable bit is set from gpio.asl
now.
BUG=chrome-os-partner:56483
TEST=System resumes from S3 on lidopen, powerbutton and USB wake.
Also from S0iX system is resuming for WIFI wake.
Change-Id: I26fd3fd9fcc83c988bcff1bda4da7a2e3da98ce6
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16566
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch sets tuned RAPL power limit PL1 value to
12W in acpi/dptf.asl for RAPL MSR register. With PL1
as 12W for WebGL and stream case, we measured SoC power
reaching upto 6W. Above 12W PL1 value, we observed that
Soc power going above 6W. With PL1 as 12W, system is
able to leverage full TDP capacity.
BUG=chrome-os-partner:56524
TEST=Built, booted on reef and verifed the package
power with heavy workload.
Change-Id: I8185ce890f27e29bc138ea568af536bc274fe7b8
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/16596
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This configures PERST_0 in devicetree. For boards without
PERST_0, the pin should be disabled. For boards with PERST_0
the correct GPIO needs to be assigned.
BUG=chrome-os-partner:55877
Change-Id: I705009b480e02b4c9b2070bb4f82cb4d552e9a46
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16603
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Add MKBP as a SCI event: the EC is then able to send events coming from
the sensors.
BUG=b:27849483
TEST=With EC configure to send MKBP events, check sensor information are
retrieved by the kernel.
Change-Id: Ib06241bfcdc8567769baff4f3371cc0c6eab3944
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://review.coreboot.org/16594
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. Removes PCIe blocker for S0ix.
2. Set the correct PCIe root port for wifi/bt on EVT.
3. Turn off CLKREQs of unused PCIe root ports to power gate the IP.
Change-Id: Iefd8869688d3a44b435dab9fc792275cd7f7e091
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/16557
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Move the current devicetree.cb to be under variants/baseboard.
New variants can provide their own devicetree as needed.
BUG=chrome-os-partner:56677
Change-Id: Ib109ca4be883884b318264500d14aa8d40e3072a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16510
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Enable the I2C based TPM on the reef board at
bus 2 and address 0x50.
This makes vboot functional without needing MOCK_TPM and
results in the following in the SSDT:
Device (TPMI)
{
Name (_HID, "GOOG0005") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Name (_DDN, "I2C TPM") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
I2cSerialBus (0x0050, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.PCI0.I2C2",
0x00, ResourceConsumer)
Interrupt (ResourceConsumer, Edge, ActiveLow, Exclusive)
{
0x00000039
}
})
}
Change-Id: Ia9775caabeac3e6a3bd72de38f9611b4cea7cea4
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16398
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The pull up for CLKRUN is required to resolve keyboard slowness
and malfunctioning observed on some reef systems. The CLKRUN
signal was probed and found to be floating when the pull up
was not enabled. Also Added pull ups for the LPC Multiplexed
command, address and data lines LAD0:3 because the LPC
Interface specification requires them.
BUG=chrome-os-partner:55586
BRANCH=none
TEST=When a key is pressed, the character is immediately visible
on the screen. Also the interrupt count for i8042 increments
immediately in /proc/interrupts.
Change-Id: I16df1a0301a3994c926a609f61291761219f9e01
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/16426
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The last vestige of the proto boards is the memory sku id
gpios. The internal pullups are still required because there's
only pulldown stuffing options available on the reef boards.
BUG=chrome-os-partner:56791
Change-Id: I04d541a897ec9aacbf2011293d18242fa32896d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16432
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Move the current NHLT configuration implementation to the baseboard
area such that other variants can leverage it or provide their
own configuration.
BUG=chrome-os-partner:56677
Change-Id: If0d48cacdc793492e1618d0eda02a149e33f0650
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16431
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Move the current memory configuration implementation to the baseboard
area such that other variants can leverage it. The swizzle config
is exported as a global to allow duplicate swizzles to use the same
structure while still allowing different memory SKUs.
BUG=chrome-os-partner:56677
Change-Id: I57201118053051c01f0e3f164ab4bbaf650b892b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16430
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add support for Chrome OS gpio ACPI table information by
providing weak implementation from the baseboard.
BUG=chrome-os-partner:56677
Change-Id: I517764b78f47fb7b3637482ff9efc053cdd1ac69
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16422
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Since multiple boards will be living within one directory move all
the macros for defining anyting related to GPIOs to the gpio.h
header file. That way, when other boards land they can override
or use them as is.
BUG=chrome-os-partner:56677
Change-Id: I36967e57fc61ef354e0b51d1ff1396ce562fa805
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16421
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
There's no common EC header file in the code base, and I didn't
want to use a header file for single declaration. Therefore,
just move the declaration to each file that uses that symbol.
BUG=chrome-os-partner:56677
Change-Id: Ibaebb0ea6a07029aec02d5185cf05ffb8593b117
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16420
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Provide APIs for the board_id() and gpio table functionality.
Default and weak implementations are provided from the baseboard.
BUG=chrome-os-partner:56677
Change-Id: I02d8deb7f60f8c4842916a9d35f51d8af74b1da4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16419
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
To further the ability of multiple variant boards to share code
provide a place to land the split up changes. This patch provides
the tooling using a new Kconfig value, VARIANT_DIR, as well as
the Make plumbing. The directory layout with a single variant,
reef (which is also the baseboard), looks like this:
variants/baseboard - code
variants/baseboard/include/baseboard - headers
variants/reef - code
variants/reef/include/variant - headers
New boards would then add themselves under their board name
within the 'variants' directory.
No split has been done with providing different logic yet.
This is purely a organizational change.
BUG=chrome-os-partner:56677
Change-Id: Ib73a3c8a3729546257623171ef6d8fa7a9f16514
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16418
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Instead of completely duplicating the a reference board's directory
when doing a variant or follower device start providing a means to
share code within a single directory. This change just starts the
process from the Kconfig side, but subsequent patches will follow
which disentangles the board specific pieces from and common
logic.
BUG=chrome-os-partner:56677
Change-Id: I96628920d78012e488ec008e35daac9c1be0cf79
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16417
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The superio.asl wasn't being included within the right scope.
Fix that as well as clean up the per-mainboard header includes
to be in one place.
BUG=chrome-os-partner:56677
Change-Id: I5e6a82f9f2e3c7455132263d19b32b2f06220376
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16413
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Some of the macros in gpio.h are no longer used because
devicetree.cb is being used to autogeneric the ACPI AML.
Therefore remove the unused macros.
BUG=chrome-os-partner:56677
Change-Id: I433a929229a0318f6c1df652655d046a5152cc63
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16412
Tested-by: build bot (Jenkins)
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The following patch is based off of the UEFI 2.6 patch. The FSP header files
are temporarily staying in soc/intel/apollolake and FspUpd.h has been relocated
since the other headers expect it to be in the root of an includable directory.
Any struct defines were removed since they are defined in the headers and no
longer need to be explicity declared as struct with the UEFI 2.6 includes.
BUG=chrome-os-partner:54100
BRANCH=none
TEST=confirmed coreboot builds successfully
Change-Id: I10739dca1b6da3f15bd850adf06238f7c51508f7
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>#
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/16308
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Many changes make proto boards very hard to work with since
proto boards were using A stepping processors. Everyone has
moved on. Therefore, drop non-proto support.
BUG=chrome-os-partner:56791
Change-Id: I2985e3965b1b69445e22506bd664b4cbca13c8ab
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16377
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
A pen interface was added. Prepare for possibly testing it by
plumbing in the gpio configuration. It's very possible these
changes need to be tweaked, but no driver code has been seen
yet nor a datasheet detailing how some of these signals actually
function.
BUG=chrome-os-partner:56739
Change-Id: I208ff3e151ce55d62e5fcc33a1e39cc87e229970
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16376
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The formerly name FP_INT_L net is actually active high and is push-pull.
Therefore adjust for the new net name, FP_INT, and polarity. The
pulldowns are there because the device is on another board that isn't
always available.
BUG=chrome-os-partner:56740
Change-Id: I6706fd2c2bd164cf3b5f1457aef69f5675f2112d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16375
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Provide GBB's hardware ID (used on Chrome OS devices) because it will be
dropped from depthcharge.
BRANCH=none
BUG=none
TEST=none
Change-Id: I4851c1bdb21863983277d3283105c88b85a6166b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 705251d2899bc006e21ff3e34a3fc3eba2dd4d00
Original-Change-Id: I7488533b83b8119f8c85cbf2c2eeddabb8e9487d
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/372579
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16363
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Certain LPDDR4 models have some HW issues that can be worked around
by turning off Periodic Retraining feature in the memory controller.
Add option to disable PR per SKU.
BUG=chrome-os-partner:55466
TEST=run RMT test, pass
Change-Id: Ie7aa79586665f6d3a7edd854a9eef07e6a1b2ab8
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/16320
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The reef board needs at least ~28ms for its S0 rails to discharge
when S3 is entered. Because of the granularity in the chipset the
effective SLP_S3_L assertion width is 50ms.
BUG=chrome-os-partner:56581
Change-Id: I20514eb0825cd4bc2ee9276b648204b7bfd6a7b0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16327
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add support for SMBIOS memory HOB save.
Add DIMM 'part_num' info to be saved as part of SMBIOS memory HOB.
BUG=chrome-os-partner:55505
TEST='dmidecode -t 17' and 'mosys -k memory spd print all'
Change-Id: I53b4a578f31c93b8921dea373842b8d998127508
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/16249
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
This is a temporary work-around since the current threshold of 70 on
TSR2 results in thermal trip and shutdown while the kernel is
booting. Changing this threshold to 100 allows kernel to boot up to
userspace. Following values were read:
$ cat /sys/class/thermal/thermal_zone4/temp
81800
$ cat /sys/class/thermal/thermal_zone4/type
TSR2
BUG=chrome-os-partner:56155
BRANCH=None
TEST=Boots to OS.
Change-Id: I951553ed4c93b02239a51a0d3036e4a750eea04b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16156
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
This patch adds mainboard_smi_gpi_handler which handles the
SMI event. This can happen in situations like lidclose and
system goes to shutdown.
BUG=chrome-os-partner:54977
TEST=When system is in firmware mode executing the command
lidclose from ec console shuts down the system.
Change-Id: I8ff6001e48dcbbd4cee5097e759352d8fea6189b
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15834
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enable I2C bus 2 for early init so it can be used by vboot for TPM
communication for verifying the memory init code.
BUG=chrome-os-partner:53336
BRANCH=none
TEST=build and boot on reef
Change-Id: Id4940ab01d8ccf288ab0a7a9a2f19867ed464e8d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16059
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
SD CLK and CLK_FB needs to be pulled down by 20K.
SD CD_N is active LOW, needs to be pulled up by 20K
SD WP pin is not connected for uSD cards, enable writes
by default by pulling low by 20K.
BUG=chrome-os-partner:54866
BRANCH=None
TEST=Test with uSD cards.
Change-Id: Ia4bbd966ffb21e276dfc31a74f4ea54718900d66
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-on: https://review.coreboot.org/16057
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
per hw team's check and info from EDS, this pin needs to be pu 20K.
Otherwise SoC may not notice interrupt request from
EC over LPC because SERIRQ line is floating.
BUG=chrome-os-partner:55586
BRANCH=none
TEST=boot ok and Quanta factory verified the keyboard issue is gone
Signed-off-by: Kane Chen <kane.chen@intel.com>
Change-Id: I5b0213514ce152d4e2cecdda8786925495a0f24a
Reviewed-on: https://review.coreboot.org/15951
Tested-by: build bot (Jenkins)
Reviewed-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
This patch enables DPTF support for Google Reef
platform, adds the ASL settings specific to Reef
boards.
BUG=chrome-os-partner:53096
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal in Reef boards. Navigate to
/sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: Ib43e4e9dd0d92fffc1b2c8459c552acd04ca0150
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15640
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Use the ACPI generator for creating the Chrome OS gpio
package. Each mainboard has its own list of Chrome OS
gpios that are fed into a helper to generate the ACPI
external OIPG package. Additionally, the common
chromeos.asl is now conditionally included based on
CONFIG_CHROMEOS.
Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Due to GPE routing, raw GPIO cannot be used for indicating the wake
signal for touchpad. Instead we need to reference GPE pins.
BUG=chrome-os-partner:55670
Change-Id: Ie5d8473df4301c7beef0cae8fe84e71b2838261b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15947
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Update the write protect GPIO reported in ACPI to GPIO_75.
Also update the controller ID to "INT3452:01" which will
point at the goldmont device and includes write protect GPIO.
BUG=chrome-os-partner:55604
BRANCH=none
TEST=verify crossystem output for wpsw_cur.
Change-Id: Ibe6a013aaab18bfa2436698298177218ca934fab
Signed-off-by: Susendra Selvaraj <susendra.selvaraj@intel.com>
Reviewed-on: https://coreboot.intel.com/7929
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15821
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
