As by afda56e1ad (buildgcc: Drop libelf/elfutils), it's not used (atm).
Change-Id: I3124cb6db5975c21e635636babe700adb0f8cd8b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Remove Linuxboot initramfs path entry in Kconfig.
Custom initramfs can and should be used with 'Linux payload'.
Change-Id: I648fb2e0383d20b0e4d50e416af637ea07d1efb4
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Some variants of nami will have a fingerprint MCU.
BUG=b:118503113
BRANCH=Nami
TEST=None (build and boot, but no hw yet)
Change-Id: I446dc09cdf7f84a801723cb403d2de80e0997c65
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/29297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
TEST=Make the printk reachable, check with
`strings build/cbfs/fallback/romstage.elf | grep lowest`
that this patch changes "MHzas" to "MHz as".
Change-Id: I42033d2f184e424818edf844cf6cf84ea07d7ed5
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/29346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Pointer math with void pointers is illegal in many compilers, though it
works with GCC because it assumes size of void to be 1. Change the pointers
or add parenthesis to force a proper order that will not cause compile
errors if compiled with a different compiler, and more importantly, don't
have unsuspected side effects.
BUG=b:118484178
TEST=Build and boot grunt.
Change-Id: Ibfeb83893f09cb897d459856aff2a4ab2a74e6e5
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
WWAN start-up control requires RESET# assert after FULL_CARD_POWER_OFF#
set to high more than 10 ms, so force RESET#(GPP_D21) to low at
bootblock stage to match the sequence.
BUG=N/A
TEST=Boot up Sarien/Arcada board, check WWAN get detected as USB
devices through lsusb.
Change-Id: I36eb841a2e8f2b36771d20577314a7451fbee133
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: I42a33ffb66ffa2f938f85484ffc3a0d3788816b3
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/28837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
soc_rtc_init() is executed in ramstage
The soc_rtc_init() needs to be executeed before FSP is called. Move the RTC
init from ramstage to romstage.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: Ic19c768bf9d9aef7505fb9327e4eedf7212b0057
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/29397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
PCH ISH enabled/disabled in FSP memory init UPD, it will be match the
setting in ISH device on/off in devicetree.cb.
BUG=N/A
TEST=Build and pass on whiskey lake rvp platform.
Change-Id: I6889634bf65e7ce5cc3e3393c57c86d622f1ac68
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
This change removes the function defintions from variant
so that the weak definition in baseboard can be used.
Refer to CL:813944.
BUG=none
BRANCH=master
TEST=Build and boot on DUT
Change-Id: I561414fcc94e3c812bb88730df9b94e332c61781
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use GPIO_134 as the EC sync interrupt and provide this value
to the embedded controller to be exported to the OS.
BRANCH=none
BUG=crbug:896347, b:118443377
CQ-DEPEND=CL:1298699
TEST=verify sensor events coming in on a reworked board
with companion EC and kernel patches
Change-Id: I41333cabe97bc8b0d59e19d84366f2ea2a59e026
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-on: https://review.coreboot.org/29278
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Each stage performs some basic initialization (stack, HLS etc) and then
call smp_pause to enter the single-threaded state. The main work of each
stage is executed in a single-threaded state, and the multi-threaded
state is restored by call smp_resume while booting the next stage.
Change-Id: I8d508c3d0f65a022010e74f8edad7ad2cfdc7dee
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/29024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philipp Hug <philipp@hug.cx>
See https://doc.coreboot.org/arch/riscv/ we know that we need to execute
smp_pause at the start of each stage and smp_resume at the end of each
stage.
Change-Id: I6f8159637bfb15f54f0abeb335de2ba6e9cf82fb
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/29023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philipp Hug <philipp@hug.cx>
After a {break,return}, "else" is generally not needed.
Change-Id: I6145424ef8ffe6854c18c1d885f579d37853a70c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29267
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After a {break,return}, "else" is generally not needed.
Change-Id: Id55af179f63316f7218e93978628cbe05e94e0aa
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Using a conditional statement to return 0 or 1 depending on a logic
value is unnecessarily complex.
Change-Id: I449ce2b71b72374de5ec4986f9cc9f91a67856ee
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29265
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are some small mistakes in these recently-added mainboards:
- board_info.txt: Lists board socket incorrectly.
- cmos.default: Loglevel was decreased some time ago.
- devicetree.cb: Spelling mistake.
- Kconfig: Mainboard name does not have a hyphen.
Change-Id: I08d9b06e79683acd3994b84647bce401ed6741e2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/29446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Get board id from AUXIN4 and RAM code from AUXIN3.
BUG=b:80501386
BRANCH=none
TEST=AUXIN4 is 0.074v and AUXIN3 is 0.212v on P0.
AUXIN4 is 0.212v and AUXIN3 is 0.212v on P1.
Change-Id: I50533e851d2fae66ae8c5e4e1aa36708d9058e94
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/29062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
We plan to get board id and RAM code from AUXADC on Kukui. Add AUXADC
driver to support it.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I121a6a0240f9c517c0cbc07e0c18b09167849ff1
Signed-off-by: Po Xu <jg_poxu@mediatek.com>
Reviewed-on: https://review.coreboot.org/29061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The Sarien mainboard uses the newly added Wilco EC.
- enable CONFIG_EC_GOOGLE_WILCO
- add the device and host command ranges to the devicetree
- have the mainboard SMI handlers call the EC handlers
- add EC and SuperIO devices to the ACPI DSDT
- call the early init hook for serial setup
Change-Id: Idfc4a4af52a613de910ec313d657167918aa2619
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a variant of the Sarien board called Arcada. This is currently
very similar to Sarien with differences in PCIe, USB, and GPIO usage.
Change-Id: I432d2ba99558e960d4e775c809cc8bf6aa1a56bf
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29410
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sarien is a new board using Intel Whiskey Lake SOC. It also uses
the newly added Wilco EC, enabled in a separate commit.
Sarien is not a true reference board, it is just one variant of
a very similar design. For that reason it is not considered the
baseboard but rather a standalone variant.
Change-Id: I2e38f617694ed2c2ef746ff8083f2bfd58cbc775
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add a way for the mainboard to provide a wake pin that the EC
will use to wake the system. This defines a _PRW object.
Change-Id: I94954104bbb8226683c37abc8c0465fe3c62a693
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29408
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Download the linux kernel tarball with curl.
Curl is already a dependency for coreboot.
Change-Id: I2e0bee3286593bd8e93b4d645242898eb9a14015
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The function `acpi_fill_madt()` is identical among all the Lynx Point
boards and sb/intel/bd82x6x, so share a common function between them.
Earlier Intel platforms have similar implementations of this function.
The common implementation might only need minor alterations to support
them.
Tested on an ASRock H81M-HDS and Google Peppy (variant of Slippy). No
issues arose from this patch.
Change-Id: Ife9e3917febf43d8a92cac66b502e2dee8527556
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
If the file `southbridge/intel/lynxpoint/nvs.h` is included in a file
that does not already include <stdint.h>, compilation errors result.
Adding the necessary <stdint.h> inclusions fixes compilation for an
ASRock H81M-HDS.
Change-Id: Id0d14705282cc959146e00dd47754ee8a2e8e825
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The platform.asl file is copied from sb/intel/bd82x6x, and also matches
the contents deleted from each mainboard's platform.asl.
Tested on an ASRock H81M-HDS and a Google Peppy board (variant of
Slippy). No issues arose from this patch.
Change-Id: I539e401ce9af83070f69147526ca3b1c122f042c
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
On an ASRock H81M-HDS neither libgfxinit, nor Linux, is able to
initialise the display when lanes are not configured to be shared
between DDI A and DDI E.
Intel's reference manual [1] states that the decision to share lanes
between DDI A and DDI E is "based on board configuration". Hence, add a
new field to the devicetree that boards can set. All existing Haswell
boards have this unset, thus taking a value of 0, so there is no change
to existing behaviour.
[1]: Intel Open Source Graphics Programmer's Reference Manual (PRM)
Volume 2c: Command Reference: Registers (Haswell)
https://01.org/linuxgraphics/documentation/hardware-specification-prms/2013-intel-core-processor-family
Change-Id: I6f7832293215d2b53e31b0a5c985e6098eb72f1b
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29385
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On my system (Pentium G3258, ASRock H81M-HDS), changing the the slow
ramp rate during `initialize_vr_config()` results in the following
exception, causing the system to hang.
CPU Index 0 - APIC 0 Unexpected Exception:13 @ 10:7f7a3736 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 00262626 ebx: 00140000 ecx: 00000603 edx: 00360000
edi: 00000007 esi: 00262626 ebp: 7f7c0fd8 esp: 7f7c0e90
So, only change this setting for Haswell ULT CPUs, as suggested by the
BIOS Writer's guide.
Change-Id: I79b10139295741d298ac6c77c4f7272ac151ad90
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29384
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the Haswell-specific monotonic timer is used on an ASRock H81M-HDS
with a Pentium G3258, the following exception is generated, causing the
system to hang.
CPU Index 0 - APIC 0 Unexpected Exception:13 @ 10:7f7a3736 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 00262626 ebx: 00140000 ecx: 00000603 edx: 00360000
edi: 00000007 esi: 00262626 ebp: 7f7c0fd8 esp: 7f7c0e90
The exception occurs when trying to read `MSR_COUNTER_24_MHz`, located
at 0x637. This MSR only exists on Haswell-ULT CPUs.
So, allow boards to use the TSC monotonic timer instead. They can do
this by placing `select TSC_MONOTONIC_TIMER` in the mainboard Kconfig.
Change-Id: I31d0e801b8cc85330dcb70c3fc03670f2e677e8f
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29383
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Nico Huber