Commit graph

812 commits

Author SHA1 Message Date
Nils Jacobs
84be0f59b7 -Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)
to FG (FooGlue). As the GX2 has no VIP port.
-Change the Memmory setup MSR register names so they correspond better to the
       databook. (Part1)
       This is less confusing for beginners.
-Add a MSR printing function to northbridge.c like in the Geode LX code.
-Remove the AES register names.(GX2 has no AES registers)
-Delete some unused code.
-Clean up GX2 northbridge code  to match Geode LX code.
-Add missing copyright header to northbridge.c.
-Move hardcoded IRQ defining from northbridge.c to irq_tables.c .


Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6221 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29 21:12:10 +00:00
Stefan Reinauer
cdcf9833e8 fix i810 boards with ram init debugging disabled.
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6220 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29 21:02:50 +00:00
Stefan Reinauer
fc01e5e3bb proper printk handling in src/northbridge/intel/i82810/raminit.c
and drop some romcc relics in 440bx code too

Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27 14:31:05 +00:00
Stefan Reinauer
50e7233689 __PRE_RAM__ is defined by the makefile
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6217 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27 13:30:39 +00:00
Stefan Reinauer
1c2c75098e dump_spd_registers() is only defined when ram init debugging is on.
Most boards unconditionally call this. Fix it in header file instead of each single romstage.c

Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6216 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27 13:29:38 +00:00
Stefan Reinauer
3c0bfaf7da Fix most CONFIG_DEBUG_RAM_SETUP issues.
The intel/xe7501devkit is still broken, I think the (romcc) image is too big to
fit in the bootblock if CONFIG_DEBUG_RAM_SETUP is enabled. It would make sense
to convert all CPU_INTEL_SOCKET_MPGA604 to CAR, but I have no hardware to test.

Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6215 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27 11:34:57 +00:00
Nils Jacobs
19d69e3bab Move Geode GX2 UMA video memory size to Kconfig
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6211 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26 05:24:50 +00:00
Nils Jacobs
642509c965 Remove dead and unused Geode GX2 code
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6210 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26 05:21:18 +00:00
Nils Jacobs
3344743215 Replace Geode GX2 MSR addresses for GLCP on GLIU1 with names
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6209 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26 05:16:47 +00:00
Nils Jacobs
1c6d4e6055 Clean up Geode GX2 comments, whitespace and coding style. Trivial.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6208 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26 05:12:49 +00:00
Keith Hui
09f5a7446a Fix build with CONFIG_DEBUG_RAM_SETUP on Intel 440BX, use printk().
It's a good thing to use printk() instead of print_*() anyway
on 440BX (and other chipsets which have been converted to CAR).

Build tested and boot-tested on ASUS P2B-LS.

Signed-off-by: Keith Hui <buurin@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6206 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-23 17:12:03 +00:00
Stefan Reinauer
bccbbe6b69 The same mechanisms are used for normal and fallback images.
Hence drop the FALLBACK_ prefix

Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-19 21:20:14 +00:00
Uwe Hermann
405721d45c Fix a few whitespace and coding style issues.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18 13:22:37 +00:00
Patrick Georgi
a0360af0f1 A couple of Poulsbo fixes:
- Don't include cmc.bin to the build. It's required, but we don't ship it
- mptable's API changes a bit. Adapt.
- Fix ACPI for new iasl versions with improved code validation

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18 11:55:06 +00:00
Patrick Georgi
be61a17351 Support Intel SCH (Poulsbo) and add iwave/iWRainbowG6 board
which uses it.

Compiles, but not boot tested lately.
Many things missing (eg. SMM support, proper ACPI, ...)

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6198 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18 07:48:43 +00:00
Stefan Reinauer
85b0fa1ace drop one more version of doing serial uart output differently.
coreboot made it kind of complicated to print a character on serial. Not quite
as complicated as UEFI, but too much for a good design. Fix it.

Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17 00:08:21 +00:00
Stefan Reinauer
259a39f393 fix according to coding guidelines
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16 23:24:27 +00:00
Rudolf Marek
cc1e645248 Attached patch implements the memory speed reductions (and 2T/1T clock logic) for DDR1 memory (939 sockets). The details can be found in BKDG chapter 4.1.3.3.
The patch looks at certain DDR configurations (dual rank/single rank) and lowers the clocks to 2T or frequency as guide suggest. It sets the DualDIMMen bit which I believe should be set for non-dual channel configs.

The patch does not implement support for three dimm configurations supported from revE.
On the other hand it should improve greatly memory stability across the 939 platform.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6176 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13 20:43:33 +00:00
Rudolf Marek
c4369536da Following patch adds support for suspend/resume functions. I had to change the get_cbmem_toc because macro magic did not work well.
The writes to NVRAM are not used in asrock board (k8 pre rev f) but they should work when used with am2 boards. In fact maybe the suspend will work on mahogany or others ;) - with some  simple patch which follows for asrock.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6173 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13 19:59:13 +00:00
Rudolf Marek
59f410fa43 Following patch adds support to bring out the memory out of self refresh when doing resume.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>

The patch is based on my 2008 patch. 
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6172 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13 19:53:58 +00:00
Rudolf Marek
97be27ebba We hardcode highmemory size in every northbridge! This is bad, and especially if suspend to ram is involved. Let the default be taken from cbmem.h which also handles the suspend logic.
Abuild tested. Please check all changes if I did not make any wrong while converting this to bytes.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6171 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13 19:50:25 +00:00
Stefan Reinauer
2b9070a610 catch some illegal configurations (trivial)
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6163 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11 22:12:32 +00:00
Stefan Reinauer
8677a23d5b After this has been brought up many times before, rename src/arch/i386 to
src/arch/x86. 

Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6161 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11 20:33:41 +00:00
stepan
8301d8348a second round name simplification. drop the <component>_ prefix.
the prefix was introduced in the early v2 tree many years ago
because our old build system "newconfig" could not handle two files with
the same name in different paths like /path/to/usb.c and
/another/path/to/usb.c correctly. Only one of the files would end up
being compiled into the final image.

Since Kconfig (actually since shortly before we switched to Kconfig) we
don't suffer from that problem anymore. So we could drop the sb700_
prefix from all those filenames (or, the <componentname>_ prefix in general)

- makes it easier to fork off a new chipset
- makes it easier to diff against other chipsets
- storing redundant information in filenames seems wrong

Signed-off-by: <stepan@coresystems.de>

Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08 07:07:33 +00:00
Myles Watson
1bc5ccac51 Move MMCONF resource into the domain for fam10 for the resource allocator.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Scott Duplichan <scott@notabs.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6148 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07 19:34:01 +00:00
Uwe Hermann
4028ce7b76 Get rid of some unneeded function prototypes in romstage.c files.
Abuild-tested.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07 19:16:07 +00:00
Zheng Bao
ea62e9b47d More explicite and straight way to set seed.
The read-modify-write wasn't needed. This is easier to understand.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6136 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-02 01:50:38 +00:00
Tobias Diedrich
e87c38e0af After finding the missing bit poweroff works now.
I cleaned up the patch and moved most of the dsdt.dsl and
acpi_tables.c into the southbrige/northbridge directory.
Updated patch should fix abuild error and incorporates suggestions
on irc by uwe (thanks for the comments).
Thanks to Idwer Vollering <vidwer@gmail.com> for the original patch.

Tested:
  Linux (poweroff, powerbutton event)
  XP (poweroff, powerbutton event)

Abuild-tested

Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6127 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-27 09:40:16 +00:00
Rudolf Marek
bcaea142f3 1) wraps the s3 parts of chipset code/memory init code with if CONFIG_HAVE_ACPI_RESUME == 1 getting rid of ugly define in romstage.c
2) the patch implements get_cbmem_toc in chipset specific way if defined.
On Intel targets it should be unchanged. On K8T890 the the cbmem_toc is read from NVRAM. Why you ask? Because we cannot do it as on intel, because the framebuffer might be there making it hard to look for it in memory (and remember we need it so early that everying is uncached)

3) The patch removes hardcoded limits for suspend/resume save area (it was 1MB) on intel. Now it computes right numbers itself.

4) it impelements saving the memory during CAR to reserved range in sane way. First the sysinfo area (CAR data) is copied, then the rest after car is disabled (cached copy is used). I changed bit also the the copy of CAR area is now done uncached for target which I feel is more right.

I think I did not change the Intel suspend/resume behaviour but best would be if someone can test it. Please note this patch was unfinished on my drive since ages and it would be very nice to get it in to prevent bit rotten it again.
Now I feel it is done good way and should not break anything. I did a test with abuild and it seems fine.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 
Acked-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6117 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22 22:00:52 +00:00
Uwe Hermann
6e9ab97106 i855: Remove useless memctrl indirection.
This needlessly complicates the code and increases register pressure on romcc
chipsets. We did the same conversion on i440BX, i830, and others.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6112 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22 12:59:36 +00:00
Stefan Reinauer
abc0c85516 Printing coreboot debug messages on VGA console is pretty much useless, since
initializing VGA happens pretty much as the last thing before starting the
payload. Hence, drop VGA console support, as we did in coreboot v3.

- Drop VGA and BTEXT console support. 
  Console is meant to be debugging only, and by the time graphics comes up
  99% of the risky stuff has already happened. Note: This patch does not remove
  hardware init but only the actual output functionality. 

  The ragexl driver needs some extra love, but that's for another day
- factor out die() and post()
- drop some leftover RAMBASE < 0x100000 checks.

Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: QingPei Wang<wangqingpei@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22 08:09:50 +00:00
Uwe Hermann
7b997053eb Simplify a few code chunks, fix whitespace and indentation.
Also, remove some less useful comments, some dead code / unused functions.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21 22:47:22 +00:00
Uwe Hermann
57b2ff886e Drop excessive whitespace randomly sprinkled in romstage.c files.
Also drop some dead or useless code snippets.

Abuild-tested.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21 17:29:59 +00:00
Uwe Hermann
d773fd370a Some more DIMM0 related cleanups and deduplication.
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do.

 - spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of
   romstage.c files and lots of spd_addr.h files. Don't even bother for
   those spd_addr.h which aren't even actually used, drop them right away.

 - Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1,
   and 0xa0 with (DIMM0 << 1) where appropriate.

 - Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0,
   SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC.

 - VIA VX800: Drop unused SMBUS_ADDR_CH* #defines.

 - VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do.
   Then, replace 0xa0 (which now becomes 0x50) with DIMM0.

 - alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes.

 - Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20 20:23:08 +00:00
Patrick Georgi
9bd9a90d6a Unify DIMM SPD addressing. For Geode, change the
addressing scheme to match the rest of the tree
(0x50 instead of 0xa0).

abuild tested.

Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20 10:31:00 +00:00
Uwe Hermann
607614d0a9 Fix/drop some obsolete comments,
- s/Options.lb/devicetree.cb/
 
 - s/Config.lb/devicetree.cb/

 - s/cache_as_ram_auto.c/romstage.c/
 
 - h8dmr_fam10/README: Drop obsolete comment, we have mc_patch_01000086.h in
   the tree now.
 
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6095 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18 20:12:13 +00:00
Patrick Georgi
8c107bc9e4 Move DIMM_MAP_LOGICAL to Kconfig.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18 11:36:16 +00:00
Tobias Diedrich
e0c0a82954 This problem was introduced with
http://tracker.coreboot.org/trac/coreboot/changeset/3953

Note that all corresponding DSDTs only ever check TOM2 against 0.

Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Rudolf Marek <r.marek@assembler.cz>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17 11:02:05 +00:00
Patrick Georgi
c2bf26d247 Move RCBA defines to northbridge (instead of mainboard)
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6074 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-15 19:44:42 +00:00
Scott Duplichan
f3cce2f3c4 MTRR related improvements for AMD family 10h and family 0Fh systems
-- When building for UMA, reduce the limit for DRAM below 4GB
   from E0000000 to C0000000. This is needed to accomodate the
   UMA frame buffer.
-- Correct problem where msr C0010010 bits 21 and 22 (MtrrTom2En
   and Tom2ForceMemTypeWB) are not set consistently across cores.
-- Enable TOM2 only if DRAM is present above 4GB.
-- Use AMD Tom2ForceMemTypeWB feature to avoid the need for 
   variable MTRR ranges above 4GB.
-- Add above4gb flag argument to function x86_setup_var_mtrrs. Clearing
   this flag causes x86_setup_var_mtrrs() to omit MTRR ranges for
   DRAM above 4GB. AMD systems use this option to conserve MTRRs.
-- Northbridge.c change to deduct UMA memory from DRAM size reported
   by ram_resource. This corrects a problem where mtrr.c generates an
   unexpected variable MTRR range.
-- Correct problem causing build failure when CONFIG_GFXUMA=1 and
   CONFIG_VAR_MTRR_HOLE=0.
-- Reserve the UMA DRAM range for AMD K8 as is already done for AMD
   family 10h.
Tested with mahogany on ECS A780G-GM with 2GB and 4GB.
Tested with mahogany_fam10 on ECS A780G-GM with 2GB and 4GB.
 
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6067 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-13 19:07:59 +00:00
Peter Stuge
02d66fd1bf Make amdk8 printk_raminit() accept just a single string parameter
The function is called with no format specifiers in the first parameter
throughout the code, so it needs to work also with just one parameter.

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6056 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-10 02:12:05 +00:00
Patrick Georgi
7bbd7f2318 Move K8_ALLOCATE_IO_RANGE to Kconfig.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6036 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07 18:20:51 +00:00
Patrick Georgi
00e1460a83 Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05 22:59:49 +00:00
Nils Jacobs
eca32808cb Add Kconfig CPU speed selection to Geode GX2 boards.
This is Abuild and boot tested.

Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05 00:23:11 +00:00
Nils Jacobs
a1e2c56079 Remove banner wrapper function and unify print(k) usage.
- Drop banner(), use printk()s instead.

 - Uncomment a few printk()s, if a users doesn't want to see them he/she
   can lower the debug level.

 - Replace print_emerg() with printk(BIOS_EMERG) etc.

Also change 'Assymetirc' into 'Asymmetric', thanks to Idwer for spotting.

This is Abuild and boot tested.

Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6021 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05 00:13:14 +00:00
Nils Jacobs
a215b0f0be Remove some unused code from gx2/raminit.c.
This is Abuild and boot tested.

Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6016 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-03 13:24:29 +00:00
Nils Jacobs
5beac7f996 Clean up some comments and white space in gx2/northbridgeinit.c
and gx2/raminit.c.

This is Abuild and boot tested.

Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6014 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-03 13:19:50 +00:00
Nils Jacobs
76890dde14 Change Geode GX2 to use the auto DRAM detect code from Geode LX.
Also, change the GX2 boards to use it.

Add a processor speed setting function in human readable MHz and remove
the useless and broken PLLMSR settings (the processor speed was hardcoded
to 366MHz in pll_reset.c).

Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6011 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-01 15:20:27 +00:00
Nils Jacobs
9644623934 Remove some unused code.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-01 14:39:49 +00:00
Nils Jacobs
809e29ec8f GX2: Clean up some white space and comments.
Also, add a copyright header to pll_reset.c.

Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6009 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-01 14:36:54 +00:00