This ports forward part of commit df09680626 ("soc/amd/picasso: Add
support for 64bit builds") to the newer AMD SoCs.
Use -Wl instead of -l to get the output format that the commands in the
Makefile expect to extract the value for PSP_BIOSBIN_SIZE. Without this
change, readelf will split the output into two lines in case of a 64 bit
coreboot build. This results in invalid amdcompress and amdfwtool
command lines which will cause the amdfwtool call to fail with
Error: BIOS binary destination and uncompressed size are required
With the old readelf -l command we get this output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000080 0x0000000002030000 0x0000000002030000
0x0000000000010000 0x0000000000010000 RWE 0x10
while we get the correct output in a 32 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000060 0x02030000 0x02030000 0x10000 0x10000 RWE 0x20
With readelf -Wl we also get the expected output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x0000000002030000 0x0000000002030000 0x010000 0x010000 RWE 0x10
TEST=This fixes the 64 bit build on Cezanne with some follow-up patches
applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I35f9feda4d0da3546592dfac233ca66732bd5464
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69895
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
CBFS_MCACHE is currently experiencing overflow with CBFS verification
enabled. Reduce the pre-x86 cbmem console size from ~5.5 KiB to 4 KiB.
This reduction along with the available free space in PSP shared buffer
(32 KiB) helps to increase the CBFS_MCACHE size from 8 KiB to required
14 KiB.
BUG=b:259342909
TEST=Build and boot to OS in Skyrim. Ensure that there are no CBFS
mcache overflows.
FMAP: area COREBOOT found @ 80a000 (8347648 bytes)
VB2:vb2_digest_init() 0 bytes, hash algo 2, HW acceleration unsupported
CBFS: mcache @0x00019a40 built for 67 files, used 0x19a0 of 0x1c00 bytes
CBFS: Found 'apu/amdfw_a' @0x0 size 0x3ff80 in mcache @0x0001b640
VB2:vb2_digest_init() 262016 bytes, hash algo 2, HW acceleration enabled
Ensure that firmware_CbfsMcache FAFT test is successful.
Change-Id: I35e1a8c6d73e0870b6a43aac604f83a0b6c3aabe
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69827
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Update acpigen_write_alib_dptc() to support extra 5 thermal profiles.
User can use these profiles for dynamic thermal table switching support.
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I9e6d5c0fc6f492340c935899920d9ee7c9396256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68470
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
It is no longer necessary to explicitly add "Warning" in front of
BIOS_WARNING message.
Change-Id: If1645180dd98ff5a1661fd568554de5831ef237e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69623
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove TODO comments after reviwing against morgana ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I598daf40a774ec81a956ce8c1aeb1cbbf4b475f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69275
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang doesn't understand the -Wstack-usage=40960 option. Replace it
with -Wframe-larger-than=40960.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7d8b9c26d3fc861615a8553332ed1070974b751b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested on google/vilboz (running the PCI rom with yabel).
Change-Id: Icd72c4eef7805aacba6378632cbac7de9527673b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Now that we have a common init_tables in all mainboards using AMD SoCs,
both the population of the fch_pic_routing and fch_apic_routing arrays
and the definition of those arrays can be moved to the common AMD SoC
code to not have the code duplicated in all mainboards.
BUG=b:182782749
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: I8c65eca258272f0ef7dec3ece6236f5d00954c66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68853
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Explicitly cast integers to fix building for long mode.
Change-Id: I9f56e183563c943d1c2bd0478c41a80512b47c5e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Use the newly added functions to iterate over the FSP HOBs to report the
resources used by FSP to the resource allocator instead of open coding
the iteration over the HOBs in the SoC code.
TEST=Patch doesn't change reported resources on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67ca346345c1fa08b008caa885d0a00d2d5afb12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use VBOOT_STARTS_BEFORE_BOOTBLOCK to determine whether the VERSTAGE
needs to be build as x86 stage.
Change-Id: I126801a1f6f523435935bb300f3e2807db347f63
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
On newer AMD platforms, mb_pre_fspm() is used to set GPIOs in romstage
for PCIe reset (currently set in bootblock) and touchscreen power
sequencing (not yet implemented, but will be later in the patch train).
Change-Id: Ia422aaa9e80355f9a9f8f850368441e5c8ff6598
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69452
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When no HOB list is found, not only adding the resources reported by the
FSP were skipped, but also adding the GNB IOAPIC resource was skipped.
Fix this bug by moving the reporting of the GNB IOAPIC resource before
the resources reported in the FSP HOBs to not skip the IOAPIC resource
when there's no HOB list.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9174c8d7e5e94144187d27210e12f2dca3a6010f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69460
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is no longer necessary to explicitly add "ERROR: "/"WARNING: " in
front of every BIOS_ERR/BIOS_WARN message.
Change-Id: I22ee6ae15c3d3a848853c5460b3b3c1795adf2f5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Instead of including pci_int_defs.asl in each board's DSDT, include it
in the common soc.asl. This moves the PRQM OperationRegion and the PRQI
IndexField defined in pci_int_defs.asl into the \_SB scope, but those
are defined inside the \_SB scope both in the Picasso reference code and
for the AMD SoCs from Cezanne on.
TEST=Both Linux and Windows still boot and don't show ACPI errors on
Mandolin after moving this inside the \_SB scope
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4e7bfb15de184cc43cd17c8249be0f59405793f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
This aligns Picasso more with the newer AMD SoCs and also makes it a bit
clearer what this file does. Also remove the unneeded tabs at the
beginning of each line.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie6e5ee815e4346004bc864a6111a255dc689eae8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
On certain mainboards due to hardware design limitations, certain SPI
Read Modes eg. (Dual I/O 1-2-2) cannot be supported. Add ability to
override SPI read modes in boards which do not have hardware
limitations. Currently there is an API to override SPI fast speeds.
Update this API for mainboards to override SPI read mode as well.
BUG=b:225213679
TEST=Build and boot to OS in Skyrim. Observe a boot time improvement of
~25 ms with 100 MHz SPI speeds.
Before:
11:start of bootblock 688,046
14:finished loading romstage 30,865
16:FSP-M finished LZMA decompress (ignore for x86) 91,049
Total Time: 1,972,625
After:
11:start of bootblock 667,642
14:finished loading romstage 29,798
16:FSP-M finished LZMA decompress (ignore for x86) 87,743
Total Time: 1,943,924
Change-Id: I160b56f6201a798ce59e977ca40301e23ab63805
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
This patch groups vboot context, recovery reason and subcode saving, and
reboot calls into two handy functions:
- vboot_save_and_reboot() - save context and reboot
- vboot_fail_and_reboot() - store recovery reason and call function
above
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ie29410e8985e7cf19bd8d4cccc393b050ca1f1c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69208
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Enable x86 SHA accelerator for use by VBOOT library. This is useful when
CBFS verification verifies the hash of the file being loaded in x86.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim. Observe a boot time improvement of
~10 ms with CBFS verification enabled.
Change-Id: I14efe7be66f28f348330580d2e5733e11603a023
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68954
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPIO debounce timebase bit 4 is only 183uS on Picasso. On the other
SoCs it is 244uS. This affects the 1mS and 2mS actual debounce times
slightly.
Time PCO Others
1mS 0.915mS 1.220mS
2mS 2.013mS 2.684mS
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id84bef75e6ab134778721ca269d763a4bb2ddde5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69209
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When using site-local we need to have ability to override
MAINBOARD_BLOBS_DIR with a different location (presumably somewhere in
site-local). site-local Makefiles.inc should be pulled in first
(different CL) allowing MAINBOARD_BLOBS_DIR to be overwritten.
Change-Id: I028042b947887d1182642ad4482dd1bba7ad8e23
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Use the common device ops instead of an soc-specific device ops.
TEST=builds for each soc
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I1804200c3c3f5ab492d237f4b03484c383862caf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add the generic data_fabric_acpi_name function and device ops to common
code.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I12053389a12081ddd81912a647bb532b31062093
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Make the data_fabric_acpi_name function more generic, in preparation to
move it to common.
TEST=build chausie, dump ACPI tables, and inspect DFD0 to DFD7
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I77140d8d0d6bf3e048b737de03d18142a6e23c1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Morgana/Glinda have a different register mapping for data fabric access,
although the registers themselves are mostly compatible. The register
layouts defined by each soc capture the differences and the common code
can use those.
Move the register offsets to soc headers and update the offsets for
morgana/glinda per morgana ppr #57396, rev 1.52 and glinda ppr #57254,
rev 1.51
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9e5e7c85f99a9afa873764ade9734831fb5cfe69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Now that the socs have defined the DF FICAA and MMIO Control registers,
update the common code to use them.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia5566f7af6cf5444fc8c627e004dd08185468c77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change disables support for memory types not used by each of the
chips. This will in turn remove the files for those memory types from
the platform builds.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8c7f47b43d8d4a89630fbd645a725e61d74bc2a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Don't call into disabled memory type code, it won't work.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie239039b3dd2b5d0a6f8e9230fd3466bb8309761
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add structs to define the data_fabric register bitfields, updated per
glinda ppr #57254, rev 1.51
Update IOMS0_FABRIC_ID and DF_MMIO_NP per referenced ppr.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I509eaf5910d8d65ce0956200d7c00451ff9ce864
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add structs to define the data_fabric register bitfields, updated per
morgana ppr #57396, rev 1.52
Update IOMS0_FABRIC_ID and DF_MMIO_NP per referenced ppr.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If64c875026b643c584975f7abffad9b35f1a7b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add structs to define the data_fabric register bitfields.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I01dcea783542ecc0a761191907c1273016f854c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add structs to define the data_fabric register bitfields.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If7cc94681cd5e282e09455c0ac7d3675884c3cf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The data_fabric_set_mmio_np function is effectively identical, so move
it to common code.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I58e524a34a20e1c6f088feaf39d592b8d5efab58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Don't set bit 2 in _STA in order for Windows not to show a warning about
an unknown device in the device manager for this device. Since the _STA
object just returns a constant, a name definition can be used instead of
a method definition.
TEST=The unknown device with device instance path ACPI\AAHB0000\0
disappeared from the device manager in Windows 10 build 19045 on a
Mandolin board with a Picasso APU.
Just shutting down and then booting it again won't clear some internal
state in Windows, so a reboot is needed instead for the change to become
visible.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8cb1712756c3623cc3ea16210af69cde0fa18f62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
CB:66943 - commit 8d66fb1a70 (soc/amd: Add amdfw.rom in coreboot.pre)
changed the build flow for the amd firmware binary after glinda was
branched from morgana. Update glinda to match the other SoCs.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b0ccaa8c33e59f7146edd6a86f107480c152008
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Adding coreboot's postcodes to the smart trace buffer lets us see the
entire boot flow in one place.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8eb9f777b303622c144203eb53e2e1bf3314afaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This adds the mendocino specific code for printing the STB data to the
boot log. It still needs to be enabled in the mainboard to be used.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I249507a97ed6c44805e9e66a6ea23f200d62cf66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This allows platforms that support AMD's STB (Smart Trace Buffer) to
print the buffer at various points in the boot process.
The STB is roughly a hardware assisted postcode that captures the
time stamp of when the postcode was added to the buffer. Reading
from the STB clears the data.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8d78c0e86b244f3bd16248edf3850447fb0a9e2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Enable GPP clk req disabling for disabled PCIe devices. If a clk req
line is enabled for a PCIe device that is not actually present and
enabled then the L1SS could get confused and cause issues with
suspending the SoC.
BUG=b:250009974
TEST=Ran on skyrim proto device, verified that clk reqs are set
appropriately
Change-Id: I6c840f2fa3f9358f58c0386134d23511ff880248
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68139
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently the GPP clk req configuration code assumes that the size of
the config array is `GPP_CLK_OUTPUT_COUNT`. This commit changes that
code to use the `ARRAY_SIZE` macro instead.
BRANCH=guybrush
BUG=b:250009974
TEST=Ran on nipperkin device, verified that clk req settings are
correct.
Change-Id: I3ff555843c6f5aa38acd8300e0dc2da4e33fb4b7
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Factor out the `gpp_dxio_update_clk_req_config` function as it will be
useful for other AMD SoCs.
BUG=b:250009974
TEST=Ran on nipperkin device, verified clk req settings match enabled
devices
Change-Id: I9a4c72d8e980993c76a1b128f17b65b0db972a03
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Instead of using magic constants for the fch_pic_routing and
fch_apic_routing array sizes, define FCH_IRQ_ROUTING_ENTRIES in the
common code headers and use this definition. This also allows to drop
the static assert for the array sizes. In the Stoneyridge mainboard code
the equivalent arrays are named mainboard_picr_data and
mainboard_intr_data; also use FCH_IRQ_ROUTING_ENTRIES as fixed array
size there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d7ee46bd013ce413189398a144e46ceac0c2a10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68818
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define the fch_irq_routing struct once in a common header file instead
of in every mainboard's code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I11d9000b6ed7529e4afd7f6e8a7332c390da6dab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68817
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Crypto engine prefers the buffer from SRAM. CBFS verification may pass
the mapped address of a CBFS file from SPI flash. This causes PSP crypto
engine to return invalid address. Hence if the buffer is from SRAM, pass
it directly to crypto engine. Else copy into a temporary buffer before
passing it to crypto engine.
BUG=b🅱️227809919
TEST=Build and boot to OS in skyrim with CBFS verification enabled using
both x86 verstage and PSP verstage.
Change-Id: Ie9bc9e786f302e7938969c8093d5405b5a85b711
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add region/range of SPI ROM to be verified by Google Security Chip
(GSC).
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Change-Id: If8a766d9a7ef26f94e3ab002a9384ba9d444dd1f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Do not compress PSP BIOS image when CBFS verification is enabled.
Otherwise when a file is added to CBFS, cbfstool is not able to find the
metadata hash anchor magic in the compressed PSP BIOS image.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled for
both x86 and PSP verstage.
Change-Id: Iaed888b81d14ede77132ff48abcfbeb138c01ce4
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
With CBFS verification enabled, CBFS file header + file name + metadata
consumes more than 64 bytes. Hence reserve additional space aligned to
the next 64 bytes.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Change-Id: I2b7346e2150835443425179048415f3b27d89d89
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66944
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change ensures that amdfw.rom binary containing metadata hash
anchor is added before any file is added to CBFS. This will allow to
verify all the CBFS files that are not excluded from verification.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled using
x86 and PSP verstages.
Change-Id: Id4d1a2d8b145cbbbf2da27aa73b296c9c8a65209
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
To enable RO CBFS verification in AMD platforms with PSP verstage,
metadata hash for RO CBFS is kept as part of verstage. This means any
updates to RO CBFS, before WP is enabled, requires updating the
metadata hash in the verstage. Hence keep the metadata hash outside the
signed range of PSP verstage. This means the metadata hash gets loaded
as part of loading PSP verstage while still being excluded from the
verification of PSP verstage.
This change keeps the metadata hash outside the PSP footer data. This
will help to keep it outside the signed range of PSP verstage & aligned
to 64 bytes.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled with
both x86 and PSP verstage.
Change-Id: I308223be8fbca1c0bec8c2e1c86ed65d9f91b966
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68135
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add build rules to build amdfwread tool. Also mark this as a dependency
either while building tools or amdfw.rom.
BUG=None
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3fee4e4c77f62bb2840270b3eaaa58b894780d75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66939
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds the initial framework for the Glinda SoC, based on what's been
done for Morgana already.
I believe that there's more that can be made common, but that work will
continue as both platforms are developed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I43d0fdb711c441dc410a14f6bb04b808abefe920
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This is the enum value to initialize the Smart Trace Buffer's
Spill-to-DRAM feature. More information on how this is used is
available in the STB Linux kernel driver.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iab2e5fb121902959ddd0e7c8cca930a327b69291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Update the MCA bank names for morgana per PPR #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If0082bd5362bdead3f9dc693d1e338e8cda224f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Make GPIO_I2C_MASK macro more accurate by using the GPIO_I2Cx_SCL
definitions instead of BIT(x).
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I13fc376552068a64768fe1cf9f1c09cca1768aed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Update the SMI definitions for morgana per PPR #57396, rev 1.52
Remove references to dropped SMITYPE_XHC2_PME in xhci.c to fix compile
errors.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6a9f05bcc6a6e4c94114ccbd07628629bdfabcba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This allows us to see which of the common code blocks have been verified
and which have not.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Icb9eba5838013de75c408c28a4a7d3afacdf0674
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Now that the SoC-specific UART controller data and the common code part
are cleanly separated, move the code to the common AMD UART support
block folder. The code is identical to the UART code in Cezanne,
Mendocino, Morgana and Picasso while Stoneyridge doesn't use the parts
related to the MMIO device driver.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id9429dac44bc02147a839db89d06e8eded7f1af2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I813483bc0421043dc67c523f0ea2016a16a29f60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation. In order to slightly reduce
the number of function calls, pass the size of and pointer to uart_info
to get_uart_idx as a parameter instead of calling again
soc_get_uart_ctrlr_info in get_uart_idx despite all callers already
having the information form the soc_get_uart_ctrlr_info call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I80278f1a098b389d78f8e9a9fb875c4e466dc5db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation. In order to slightly reduce
the number of function calls, pass the size of and pointer to uart_info
to get_uart_idx as a parameter instead of calling again
soc_get_uart_ctrlr_info in get_uart_idx despite all callers already
having the information form the soc_get_uart_ctrlr_info call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8cfea274f4c9e908c11429199479aec037a00097
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation. In order to slightly reduce
the number of function calls, pass the size of and pointer to uart_info
to get_uart_idx as a parameter instead of calling again
soc_get_uart_ctrlr_info in get_uart_idx despite all callers already
having the information form the soc_get_uart_ctrlr_info call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iab1aec44c55570aa8085aeaf68ec69fe6de0f2ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation. In order to slightly reduce
the number of function calls, pass the size of and pointer to uart_info
to get_uart_idx as a parameter instead of calling again
soc_get_uart_ctrlr_info in get_uart_idx despite all callers already
having the information form the soc_get_uart_ctrlr_info call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I474e47059eaebcf0b9b77f66ee993f1963ebee77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Initialize the two GPIOs of the SoC UART if it's used for serial console
to be sure that the I/O mux is configured correctly without having to
rely on the bootblock_mainboard_early_init call to do this. This brings
Stoneyridge more in line with the other AMD SoCs. Since this code will
be factored out to the common AMD SoC code in a follow-up patch, the
function prototype is added to southbridge.h instead of creating a new
uart.h header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4aa6734e63dad204d22ce962b983cde6e3abd62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
soc/iomap.h provides the UART base address information used in the
uart_info struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7defd135dc888cfc7d6e1c106d72116425560576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use an array of soc_uart_ctrlr_info to align Stoneyridge
with the other AMD SoCs in order to allow commonization of the AMD SoC
UART code. Since the current Stoneyridge code doesn't provide or use
UART MMIO device operations, only the base addresses of the UART
controllers from this array are used for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie868cd3e2f77b0f7253c9f6d91dd3bbc3e4b6b0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The SoC's uart_info structs all use the same anonymous uart_info struct
definition, so create a named struct for this in the common AMD SoC UART
header and use it in the SoC code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id183a3c838c6ad26e264c2a29f3c20b00f10d9be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The goal of this is to be able to move most of the code over to the
common AMD blocks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib893720911114d61ee6b3fbbf1a2a3594500bcfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The goal of this is to be able to move most of the code over to the
common AMD blocks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5077681b64dd68351340bd179838a174d8df1701
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The goal of this is to be able to move most of the code over to the
common AMD blocks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0e585370a0de56787340788acfecc7931820566d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The goal of this is to be able to move most of the code over to the
common AMD blocks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia496a4b29b25d4438ed8fc09bfe6f83e3fb768d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59985f283f1694beeacb0999340111146fa3f39b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Move i2c SoC related code from early_fch.c to i2c.c
TEST=build boards for each SoC
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I69d4b32cf95ce74586bd8971c7ee4b56c1c2fc04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Update the GPIO definitions for morgana per PPR #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7fa4aaf81b5487f7548f430cb35630aca8be732f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This code is identical for all non-CAR AMD SoCs, so factor it out to
soc/amd/common/block/cpu/noncar/bootblock.c to avoid code duplication.
Also integrate the bootblock.c improvement to include cpu/cpu.h which
provides cpuid_eax from commit 68eb439d80 ("soc/amd/picasso: Clean up
includes").
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I42e4aa85efd6312a3ab37f0323a35f6dd7acd8e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rename soc/amd/common/block/cpu/smm/smi_ampc_helper.c to smi_apmc.c and
add the fch_apmc_smi_handler function.
Remove the duplicated function from picasso, cezanne, mendocino, and
morgana SoC.
The stoneyridge soc does not implement the APM_CNT_SMMINFO handler, so
give the handler a unique name that does not conflict with the common
handler name.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2e6fb59a1ee15b075ee3bbb5f95debe884b66789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68441
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Cezanne has two SATA controllers, but doesn't select
SOC_AMD_COMMON_BLOCK_SATA, so it's not added to the SATA devices in the
Cezanne chipset devicetree.
Change-Id: If7f0a9638151cf981d891464a2c3a0ec5fc9c780
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removed the need to maintain a PCI driver.
Change-Id: I43def81d615749008fcc9de8734fa2aca752aa9d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This removes the need for a PCI driver.
Change-Id: I6674d13f434cfa27fa6514623ba305af6681f70d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This removes the need for a PCI driver.
Change-Id: Iab75f8c28a247f1370f4425e19cc215678bfa3e5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
The northbridge ops should be added to the actual northbridge and not
the first HT device. Neither of the devices has BARs on it, so
read_resources implementation will still work correctly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2e5f21bfe5fff043d7d9afafa360764203dd61f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68409
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Stoneyridge is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime. In contrast to the other AMD
SoCs in the coreboot tree the PC driver used the PCI ID of the first HT
PCI device function, so add the ops to the device 0x18 function 0
devicetree entry in this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I500521701479aa271ebd61e22a1494c8bfaf87fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68408
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the need for a lot of boilerplate code in the soc code to
hook up device_operations to devices.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id668587e1b747c28207b213b985204b7a961a631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68410
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add chipset devicetrees for Stoneyridge and Carrizo, which is also
supported by the Stoneyridge code, but has more external PCIe ports and
devices. The mainboard's devicetrees will be changed to use the aliases
defined in the chipset devicetree in follow-up patches. This is a
preparation to statically assign the ops for the internal devices
statically in the SoC devicetree instead of dynamically adding them in
ramstage.
BKDG #55072 Rev 3.04 was used to check the PCI devices and functions and
the MMIO addresses.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia45260b1168ed1d99993adfb98475da5b5c90d11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68316
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the need for a PCI driver.
Change-Id: I4b499013a80f5c1bd6ac265a5ae8e635598d9e6c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a PCI driver.
Change-Id: I8e235d25622d0bd3f1bb3f18ec0400a02f674a6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a PCI driver.
Change-Id: Id25016703d1716930d9b6c6d1dab5481b10aca17
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Morgana is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67362ae4a32bc9b1dd19ee5e4caf42db8f5dd1bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68311
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Mendocino is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: I5619c8ad42cdeb019cb7294da884909df64a2211
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Cezanne is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: If535221335217cee53bca956747e7f17f0a5fd8d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: Ide747c9d386731af89b27630b200676c6e439910
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67743
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a lot of boilerplate code in the soc code to
hook up device_operations to devices.
Change-Id: I2afc1855407910f1faa9bdd4e9416dd46474658e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This allows for reduced use of chip_operations in the followup patch and
allows the allocator to skip over the used mmio.
Change-Id: I4052438185e7861792733b96a1298201c73fc3ff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The psp_verstage/svc.h SVC_CALLx macros are virtually
identical between picasso/cezanne/mendocino, so move
to common.
TEST=timeless builds are identical
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I86a8d9b043f68c01ee487f2cdbf7f61934b4a520
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This is not critical functionality and doesn't need a build-time error.
Having it as a build time error causes a chicken & egg issue where
the chipset needs to be added before it can be added to this file, but
the header file fails the build because the chipset is unknown.
It's not practical to exclude these files from the new platform builds
because the PSP functionality is thoroughly embedded into the coreboot
structure.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ib02bbe1f9ffb343e1ff7c2bfdc45e7edffe7aaed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This is an initial framework for the Morgana SoC.
TODOs have been added to the files for both customization and
commonization.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: If92e129db10d41595e1dc18a7c1dfe99d57790cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68195
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
apu/amdfw_a was only getting added to CBFS when VBOOT_SLOTS_RW_AB was
selected, but needs to be added in the RW_A only case as well
(VBOOT_SLOTS_RW_A). Since VBOOT_SLOTS_RW_AB selects VBOOT_SLOTS_RW_A,
we can guard amdfw_a and _b separately and both will be added in the
RW_AB case.
TEST=build google/zork with VBOOT_SLOTS_RW_A or VBOOT_SLOTS_RW_AB
selected, ensure amdfw_a and amdfw_b are added to correct CBFS regions
as appropriate.
Change-Id: Ic8048e869d7449eeb1ac10bfec4a5646b848d6a8
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68126
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
apu/amdfw should be restricted to the RO region only when building with
VBOOT + any RW region (RW_A or RW_A + RW_B); it is not tied to ChromeOS
in any way. Fix guarding to match newer AMD platforms (eg, CZN/MDN).
TEST=build google/zork without CHROMEOS, with VBOOT_SLOTS_RW_A
Change-Id: I32d7fa7a4b3d41107cfdba96128a4a75f7066c6f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68125
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Copy AMD PSP fw hash table into memory, then pass it to the PSP.
The PSP will use this hash to verify it's the correct firmware bundled
with coreboot build and not replaced.
BUG=b:203597980
TEST=Build Skyrim BIOS image with the hash table and boot to OS after
PSP verified the binaries against the hash table.
Change-Id: I84bea97c89620d0388b27891a898ffde77052239
Signed-off-by: Kangheui Won <khwon@chromium.org>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60291
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add build rules to separate signed PSP/AMDFW. Also add build rules to
add the generated hash table containing SHA digest of individual PSP FW
components into CBFS. This will allow verified boot to load and verify
less components from SPI rom which means faster boot time.
BUG=b:206909680
TEST=Build Skyrim with modified fmap and Kconfig
Change-Id: If54504add72b30805b6874bee562e0b9482782b9
Signed-off-by: Kangheui Won <khwon@chromium.org>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67260
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enabling this config will put signed amd firmwares into
SIGNED_AMDFW_[AB] region which is outside FW_MAIN_[AB]. Vboot only
verifies FW_MAIN_[AB] so these regions will not be verified by vboot,
instead the PSP will verify them.
As a result we have less to load and verify from SPI rom which means
faster boot time.
BUG=b:206909680
TEST=Build Skyrim with modified fmap and Kconfig.
Change-Id: If4fd3cff11a38d82afb8c5ce379f1d1b5b9adfbf
Signed-off-by: Kangheui Won <khwon@chromium.org>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59867
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also include arch/mmio via device/mmio.h and not directly to have the
[read,write][8,16,32]p helper functions available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id8573217d3db5c9d9b042bf1a015366713d508c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67981
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Also include arch/mmio via device/mmio.h and not directly to have the
[read,write][8,16,32]p helper functions available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c6f5c73b41546b304f16994d517ed15dbb555f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67980
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Use just one function to get the chipset powerstate and add an argument
to specify the powerstate claimer {RTC,ELOG,WAKE} and adjust the
failure log accordingly.
TEST: compile tested and qemu emulation successfully run
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I8addc0b05f9e360afc52091c4bb731341d7213cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add new PSP svc call to pass psp firmware hash table to the PSP.
psp_verstage will verify hash table and then pass them to the PSP.
The PSP will check if signed firmware contents match these hashes.
This will prevent anyone replacing signed firmware in the RW region.
BUG=b:203597980
TEST=Build and boot to OS in Skyrim.
Change-Id: I512d359967eae925098973e90250111d6f59dd39
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67259
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use dynamic power and thermal configuration (DPTC) via ACPI ALIB calls
to throttle the SOC when there is no battery or critically low battery,
to enable the SOC to boot without overwhelming the AC charger and
browning out.
DPTC is not enabled for low/no battery mode with this CL. It will be
enabled for Skyrim in a following CL.
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ifeddb99e97af93b40a5aad960d760e4c101cf086
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67189
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for DPTC by calling SB.DPTC() as part of PNOT().
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ifc332bfc4d273031c93b77673224b4f3c2871fb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67694
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add VRM DPTC limit registers. These are required when throttling the SOC
for low/no battery mode to prevent the SOC from overwhelming the
charger.
b/245942343 is tracking passing these additional fields to the FSP and
having the FSP configure them.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ie62129d967192f9a9cf654b1854d7dbe4324802a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67378
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update acpigen_write_alib_dptc() to support "low/no battery mode",
which throttles the SOC when there is no battery connected or the
battery charge is critically low.
This is in preparation for enabling this functionality for Mendocino.
BUG=b:217911928
TEST=Build zork
TEST=Boot nipperkin
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Icea10a3876a29744ad8485be1557e184bcbfa397
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66804
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are platforms equipped with AMD SoC where I2C3 controller
connected to TPM device is shared between X86 and PSP. In order to
handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends
acquire and release requests to be accepted by PSP.
Introduce new CONFIG for Mendocino SoCs similar to what we have for
Cezanne.
BUG=b:241878652
BRANCH=none
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I015a24715271d2b26c0bd3c9425e20fb2987a954
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
SOC_AMD_COMMON_BLOCK_ACPI_DPTC can be enabled conditionally for any
skyrim boards, similar to mainboard/google/zork/Kconfig. This makes the
value dptc_tablet_mode_enable redundant.
This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely
with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC
is only included for boards that actually enable it.
BRANCH=none
BUG=b:217911928
TEST=emerge-skyrim coreboot
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I73fca5a16826313219247f452d37fb526ad4f4df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
SOC_AMD_COMMON_BLOCK_ACPI_DPTC can be enabled conditionally for any
guybrush boards, similar to .mainboard/google/zork/Kconfig This makes
the value dptc_tablet_mode_enable redundant.
This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely
with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC
is only included for boards that actually enable it.
BRANCH=none
BUG=b:217911928
TEST=emerge-guybrush coreboot
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I07f1266fa80a6c9ee4ec3b3ba970a70c6c72fb54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Moving the config value SOC_AMD_COMMON_BLOCK_ACPI_DPTC to
soc/amd/picasso/Kconfig and conditionally enabling it for only Morphius
boards makes the value dptc_tablet_mode_enable redundant.
This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely
with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC
is only included for boards that actually enable it.
BRANCH=none
BUG=b:217911928
TEST=Build zork
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ic54a9bb491234088be8184bec8b09e2e31ffa298
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
AMD CPUs have a convenient MSR that allows to set the SMBASE in the save
state without ever entering SMM (e.g. at the default 0x30000 address).
This has been a feature in all AMD CPUs since at least AMD K8. This
allows to do relocation in parallel in ramstage and without setting up a
relocation handler, which likely results in a speedup. The more cores
the higher the speedup as relocation was happening sequentially. On a 4
core AMD picasso system this results in 33ms boot speedup.
TESTED on google/vilboz (Picasso) with CONFIG_SMI_DEBUG: verify that SMM
is correctly relocated with the BSP correctly entering the smihandler.
Change-Id: I9729fb94ed5c18cfd57b8098c838c08a04490e4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
