The Embedded Controller sits behind the LPC bridge and so needs
LPC decodes to be enabled.
Remove the LPC decode enable out of agesawrapper.c. The enable
is in fact done in: 'VOID FchInitResetLpcProgram(IN VOID *FchDataPtr)'
which writes the magic '0xFF03FFD5' to register 0x44 of the PCI 14.3
LPC Bridge to enable LPC decodes when HUDSON_LEGACY_FREE is not defined.
Change-Id: I0b4e99cc0d6f89f0261f26ee61b8c175a373c730
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7625
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Move LPC decode enable out of agesawrapper.c. It should not be on the
execution path of AP CPUs and function is not related to AGESA per se.
Change-Id: I19d6a20fbc7a3d28601caa9aaa1d73d6930257ae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7602
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
NOTE: For fam12 and fam14 ASSERT() is defined empty so execution may
fall through critical failures.
Change-Id: Ifef65d749d340f1df3a43b5fcb38c4315ef944e8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7154
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
GPP config from devicetree.cb is not implemented for fam15tn/fam16kb.
Also only for asus/f2a85-m the configuration value matched the actual
programming.
Change-Id: Ic7a9aa1360f4ba35d202f3f7dd1fc3c20a52dde0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7600
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
There were instances of unneeded arch/hlt.h includes,
various hlt() calls that weren't supposed to exit (but
might have) and various forms of endless loops around
hlt() calls.
All these are sorted out now: unnecessary includes are
dropped, hlt() is uniformly replaced with halt() (except
in assembly, obviously).
Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7608
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Richland APU A10-5750M
8GB RAM
4MB Flash
Boots to working Linux with SeaBIOS payload. S3 works with
Linux 3.16.3-2 Debian Jessie.
Change-Id: I5d05d1b31400fdb9e41c2e011c5b0bf9986fe970
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/7560
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Southbridge already selects it, no need to repeat.
Change-Id: I9a5ad553f48e30103371cc2d896168ae4abfb8ef
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7570
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This was copied from P2B-F without doing any modification. It never worked.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Change-Id: I2c90688c8ff8c3bd272d24f059e8e1bfb86e2b4a
Reviewed-on: http://review.coreboot.org/7555
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
On those chipsets the pins are just a legacy concept. Real interrupts are
messages on corresponding busses or some internal logic of chipset.
Hence interrupt routing isn't anymore board-specific (dependent on layout) but
depends only on configuration.
Rather than attempting to sync real config, ACPI and legacy descriptors, just
use the same interrupt routing per chipset covering all possible devices.
The only part which remains board-specific are LPC and PCI interrupts.
Interrupt balancing may suffer from such merge but:
a) Doesn't seem to be the case of this map on current systems
b) Almost all OS use MSI nowadays bypassing this stuff completely
c) If we want a good balancing we need to take into account that e.g.
wlan card may be placed in a different slot and so would require complicated
balancing on runtime. It's difficult to maintain with almost no benefit.
Change-Id: I9f63d1d338c5587ebac7a52093e5b924f6e5ca2d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7130
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Not sure if they ever worked.
Change-Id: I77cf090763aa7ac46480a5a9583985b10b02a267
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7551
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
As build.h is an auto-generated file it was necessary to add it as
an explicit prerequisite in the Makefiles. When this was forgotten
abuild would sometimes fail with following error:
fatal error: build.h: No such file or directory
Fix this error by compiling version.c into all stages.
Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7510
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This implementation is more compact, unified and works with windows as well.
Tested under windows and under Debian GNU/Linux.
Change-Id: I585dec12e17e22d829baa3f2dc7aecc174f9d3b5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7296
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
Do all the handling in SB code with few parameters from devicetree.cb
instead of having mobo callbacks.
Change-Id: I8fd02ff05553a3c51ea5f6ae66b8f5502509e2bc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7199
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Part number is used only for coreboot ROM identification and
in coreboot tables. Rather than guessing the P/N, just use readable name.
SMBIOS uses information from EEPROM and so isn't affected.
Change-Id: I33534c3acb83f20d5b493c82bfc98896bf64ff1a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7177
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Native raminit for sandy/ivybridge was introduced in:
7686a56 sandy/ivybridge: Native raminit.
An additional current level is needed.
Change-Id: Ied73d168045c25d37afa5d9d7073de7f9c6435c7
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7098
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
Without this patch the laptop powers down after resume.
Change-Id: Ic6486fd4c4cc55b1ac5695f9d6d83fc2193b7eba
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7102
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
As introduced in:
1783a3c ivybridge: LVDS gfx init.
The panel on the T520 is a LP156WD1 40 pin LVDS (2 ch, 6-bit).
Tx parameters derived from datasheet table.
Change-Id: Ib733836e3233a7f14a79f36a27ed36b638e837f5
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7100
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
It's specific to butterfly. Doesn't do anything on lenovos.
Change-Id: I98b7c3199de5d8515bd869936e1b95847321d264
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7099
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
It's specific to butterfly. Doesn't do anything on lenovos.
Change-Id: I7b607196733225eace0f5e70b4cc02651488aa74
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6841
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As currently many systems would be barely functional without ACPI,
always generate ACPI tables if supported.
Change-Id: I372dbd03101030c904dab153552a1291f3b63518
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4609
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Default to do native VGA init since this machine is a laptop
and the user would likely want to use it as such. Also, if you
know what this is you know how to turn it off if you want to.
Change-Id: I55f91a48affbd0ec93b0bb0c88c531d15c32ba21
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6903
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Upon S3 resume, the machine powers off due to the ME not being awake yet.
Change-Id: I0255dd0fa6b4cb3b539e11a69a618c770c44f4b0
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6876
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
As introduced in:
1783a3c ivybridge: LVDS gfx init.
The panel on the T530 is a AUO B156HW01 V.4, 40 pin LVDS (2 ch, 6-bit).
Tx parameters derived from datasheet table.
Change-Id: I2e3b56a2a3d1ede08a704b839cc11fe6d685cf5b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6395
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
We now have Native raminit for both sandy/ivybridge introduced in:
7686a56 sandy/ivybridge: Native raminit.
Let us make good use of this support over using the Intel MRC blob to
initialise memory.
USB RCBA configuration data taken between base of 0x3500 up to 0x3600
from `inteltool -r`.
Remark: Note the current port is poorly tested at the moment and I am the
sole maintainer, however one less blob invites more interest for better
support. More to come hopefully.
Change-Id: I41d0ef8303dfd369c5565b823e68a6bee09c44f5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6394
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
ExpressCard is connected to PCIe port 4.
Change-Id: I0cffabd9d9435d24a7e9c178c2f96fb1a9390320
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6850
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Replace codec config copied form T530 with dumped values from T520
/sys/class/sound/card0/hdaudioC0D0/init_pin_configs.
Intel Azalia HDMI is always enabled, but DP isn't connected to a
connector.
Change-Id: Iabdae4a6669ff429d5769a1bb0c0fb1abc12ba82
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6849
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
OEM strings should not be handled by mobo code but by common code with strings
collected from all devices.
Change-Id: Ibde61a1ca79845670bc0df87dc6c67fa868d48a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6788
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Tablets have different mainboard version than laptop variants.
Change-Id: I77a1e2b50d30dcf3fa064e0c378ceca7ccf96e89
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6785
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
override default ivy VGA_BIOS_ID
add model & part number
Remove ARCH_X86 as is in,
fd33781 Move ARCH_* from board/Kconfig to cpu or soc Kconfig.
Change-Id: I61dc6434de7af2d8672f784df87a8b9d3f0fb068
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6759
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This disables the blink hardware as it seems to be in the dump. This is
safer as it does not rely on 0 as the reset value when '0x00040000' is
the default according to the util/inteltool. As seen:
gpiobase+0x0018: 0x00040000 (GPO_BLINK) DIFF
Change-Id: Ia1fde108bf3752484f5e991600c435f776af0ced
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6436
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Use defines of offsets rather than hard coded values.
Change-Id: Id2471cd22aa402d74163473e48f86af9789cdaa7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6435
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
SATA Port documentation
PCIe unused ports and documentation
T520 have no keyboard backlight
Change-Id: I517ff8519ea22a9a7a9b6e3136efd15d4a0f8fc4
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6743
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Thinkpad T520 ExpressCard Slot PCIe lanes are connected to port 4.
Tested with Serial Port Card. Information read from schematic / lspci
Change-Id: I459943d427578d135f9aed1aa66da269ddfeee87
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6735
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
As is in:
91175bb lenovo/x201 & x230: Add EC info to SMBIOS
This is needed for the Linux driver for the Lenovo's to properly attach.
Change-Id: Ib910b25f392d9d3d6362b6909ce9fd4eeae9a096
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6399
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Old init was a replay not even meant to have been committed.
This one really computes values and does its job. Tested on
Macbook2,1 (1280x800) and X60 (1024x768).
Change-Id: I61b6946c095fe06e20ae9a0db54696d0568225dd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5320
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested on lenovo X200 in both text and gfx mode.
Change-Id: I273971d0f34ca3529959d4228e9516775459b806
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6682
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This header has nothing to do with cache-as-ram. Therefore, 'car'
is the wrong term to use. It is about providing a prototype for
*romstage*.
Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6661
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When passing '-ffreestanding' the 'main' romstage.c may no longer
necessarily be considered the entry point.
From the C specification in 5.1.2.1 Freestanding environment;
"In a freestanding environment (in which C program execution may take
place without any benefit of an operating system), the name and type of
the function called at program startup are implementation-defined."
Clang complains about these being missing as Clang is somewhat more
strict about the spec than GNU/GCC is. An advantage here is that a
different entry-point type-signature shall now be warned about at
compile time.
Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5872
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Otherwise without USB when coreboot boots too quickly
EC is confused and thinks that LID is closed and so
powers off the backlight until user flaps the lid.
Change-Id: I14dfaa62582de83fd4c9f9518e9436b3a3035366
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6651
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Otherwise we get a warning on normal boot.
Change-Id: Ida1e1d23e258438251d4ec2417f93ad14c3b9f7d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6652
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Change-Id: I05cea020e77051bd3bc0e93b0c70e12b9b985d05
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6398
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
All modes tested on X201.
Change-Id: I23df81523196ea3f5fdb10eb04f4496c00aaeb9f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6481
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Change-Id: I9aa3652d1b92cece01d024e19bdc065797896001
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6470
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Based on X60 counterpart.
Change-Id: I1556f75db08edf47c9313dae91072335240d46ad
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4780
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This makes S3 work.
Change-Id: Ife14372f5f9bb151d7e6e98c6069eb99d5369baf
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6392
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Based on damo22's work and my X230 tracing.
Works for my X230 in a variety of RAM configs.
Also-By: Damien Zammit <damien@zamaudio.com>
Change-Id: I1aa024c55a8416fc53b25e7123037df0e55a2769
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/5786
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Currently cbmem_recovery is done in raminit only on non-S3-resume path
do it on both paths to reduce confusion.
Change-Id: I16161ad449b9802a855fcf834aa721f4f65c0bb4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5954
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
We have the macro, let us be sure to make use of it.
Change-Id: I8dc5ca580c7485e3cce7ebc29189a452de52b1b1
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6193
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Although it builds without any further changes, including the header
src/northbridge/intel/i945/i945.h
where `BSM` is defined, would be useful. Unfortunately that conflicts
with the already included header `southbridge/intel/bd82x6x/pch.h`,
so it is left as is.
Change-Id: I7c0a795338c34038169e082446907987364a0e88
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5932
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Like with other more recent boards already using DYNAMIC_CBMEM,
the pointer to TOC is no longer stored in GNVS for ACPI.
Change-Id: If2e11294202c40793ec985e2c0c006bbfcd03d3d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6034
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
This code would not get enabled just by flipping the options in menuconfig,
also ramcheck() no longer test the range like the parameters would imply.
We should add non-destructive ram_check() on S3 resume path to verify
memory controller configuration has been properly recovered.
Change-Id: Ie4675c4770146c4312cdfbc81afa19f243f90ee4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6027
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
First of many to remove guarding the inclusion of headers based on
CONFIG_ options. This *potentially* could hide issues such as functions
being swapped from under our feet, since different runtime behaviour
could be declared with the function same name and type-signature. Hence,
depending on the header we happen to get may change runtime behaviour.
Change-Id: Ife56801c783c44e1882abef711e09b85b7f295a4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6055
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Also update packardbell/ms2290 to match lenovo/x201.
Change-Id: I6bda740cadd81ebe47e57742c507bff322a9fb0e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6062
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM.
Change-Id: I558a7ae333e5874670206e20a147dd6598a3a5e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The lock bit for UVSVC/LVSVC was set before both registers were programmed.
Change-Id: I000440db5c8dd2f260ebc1b69108b75621faf7b3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5167
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Without it option ROM run results in just a black screen.
Change-Id: Id203f55ca0f02c290a3f40ac1ec7c5f23c5580bf
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5344
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
thinkpad_acpi checks that BIOS version matches some pattern.
Report version in this form.
Not cleaned up as the idea of this patch seems to be met with resistance.
Can make it Thinkpad-specific if the idea is accepted.
Change-Id: I15e33e87e7a7f42d6a06f12fb39b5172153af8a1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4650
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Remove use of global variables uma_memory_base and uma_memory_size
from builds with Intel northbridges, as these variables can be kept
within the chipset or even as stack locals.
Intel platforms have no functional implemenation for option GFXUMA.
If we did implement some choice between external and integrated graphics,
it needs to be named in less obscure fashion.
Change-Id: I12f18c4ee6bc89e65a561db6c2b514956f3e2d03
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5720
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
When the system is started with dock, the serial port works.
As soon as the laptop is undocked and redocked, the serial port
no longer works. See below superiotool dump snippet:
Upon bootup: SIO @ 0x2e
LDN 0x03 (COM1)
idx 30 60 61 70 71 74 75 f0
val 01 03 f8 04 03 04 04 02
Redocked: SIO @ 0x2e
LDN 0x03 (COM1)
idx 30 60 61 70 71 74 75 f0
val 00 03 f8 04 03 04 04 02
Since the function dock_connect is executed every time the
dock is reconnected, starting without a dock and then attaching
it to a dock is now also fixed.
Change-Id: Ibd97589a8c743673a55e382a5db2ba62656c595e
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/5761
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
