GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/soc/intel/apollolake/Makefile.inc

163 lines
4.8 KiB
PHP
Raw Normal View History

soc/intel: Add skeleton infrastructure for Apollolake SOC This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-06 19:33:49 +02:00
ifeq ($(CONFIG_SOC_INTEL_APOLLOLAKE),y)
subdirs-y += ../../../cpu/intel/microcode
subdirs-y += ../../../cpu/intel/turbo
subdirs-y += ../../../cpu/x86/lapic
subdirs-y += ../../../cpu/x86/mtrr
subdirs-y += ../../../cpu/x86/smm
subdirs-y += ../../../cpu/x86/tsc
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
subdirs-y += ../../../cpu/x86/cache
soc/intel: Add skeleton infrastructure for Apollolake SOC This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-06 19:33:49 +02:00
soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLE Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11 02:47:03 +01:00
bootblock-y += bootblock/bootblock.c
soc/intel/apollolake: use CAR code coherency for all CAR stages The flush L1D to L2 operation was only being used when loading romstage from bootblock. However, when the FSP-M component is loaded no code coherency actions are taken. I suspect this is because the FSP-M component is larger than the 24KiB L1D and the entry point is early in the image. Thus, when loading the FSP-M component the earlier part of the image is flushed out to L2 in the process of loading the latter part of the component. Also, once verstage is introduced the same code coherency actions need to be taken as well. Therefore, position the apollolake code to handle all these cases. Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14210 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-31 18:38:13 +02:00
bootblock-y += car.c
soc/intel/apollolake: Add basic HECI support Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15 02:16:35 +02:00
bootblock-y += heci.c
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
bootblock-y += i2c.c
soc/intel/common/block: Add LPC Common code and use it for APL Add LPC common code to be shared across Intel platforms. Also add LPC library functions to be shared across platforms. Use common LPC code for Apollo Lake soc. Update existing Apollolake mainboard variants {google,intel,siemens} to use new common LPC header file. Change-Id: I6ac2e9c195b9ecda97415890cc615f4efb04a27a Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-05 01:26:09 +02:00
bootblock-y += lpc.c
soc/intel/apollolake: Add support for memory-mapped boot media On Apollo Lake SPI flash is memory mapped. The mapping is different to previous platforms. Only "BIOS" region is mapped in contrast to whole flash. Also, the 128 KiB right below 4 GiB are being decoded by readonly SRAM. Fail accesses to those regions, rather than returning false data. Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13706 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13 00:12:43 +01:00
bootblock-y += mmap_boot.c
soc/intel/apollolake: Implement global reset handling Global reset enable bit is not cleared on reset. Therefore, clear the bit early. Lock down 0xcf9 so that payload/OS can't issue global reset. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I3ddf6dd82429b725c818bcd96e163d2ca0acd308 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15199 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-15 07:20:28 +02:00
bootblock-y += pmutil.c
intel/apollolake: Enable SPI properly in bootblock and ramstage Bootblock: - Temporary BAR needs to be assigned for SPI device until PCI enumeration is done by ramstage which allocates a new BAR. - Call spi_init to allow bootblock/verstage to write/erase on flash. Ramstage: - spi_init needs to run in ramstage to allow write protect to be disabled for eventlog and NVRAM updates. This needs to be done pretty early so that any init calls(e.g. mainboard_ec_init) writing to flash work properly. Verified with this change that there are no more flash write/erase errors for ELOG/NVRAM. BUG=chrome-os-partner:54283 Change-Id: Iff840e055548485e6521889fcf264a10fb5d9491 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15209 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-06-16 02:13:20 +02:00
bootblock-y += spi.c
soc/intel/apollolake: group serial console options into one Kconfig Add SOC_UART_DEBUG which does all the appropriate selection of the dependent Kconfig options for seral console. Also provide a default option of it being turned off instead of always selected. Change-Id: I1a6dba9c0072a17859c8f389709afe6fe3b04fac Signed-off-by: Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/13790 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-25 01:49:07 +01:00
bootblock-$(CONFIG_SOC_UART_DEBUG) += uart_early.c
soc/intel/apollolake: Clean up code by using common CAR init This patch currently contains common CAR initialization required in bootblock phase along with common MSR header - 1. Use SOC_INTEL_COMMON_BLOCK_CAR to have common CAR initialization and CAR teardown. 2. Use common MSR header "intelblocks/msr.h" inside soc/cpu.h Change-Id: I67f909f50a24f009b3e35388665251be1dde40f7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18555 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-03 13:53:59 +01:00
bootblock-$(CONFIG_FSP_CAR) += bootblock/cache_as_ram_fsp.S
soc/intel/apollolake: allow ApolloLake SoC to use FSP CAR Init FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize & tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to ApolloLake SoC when CONFIG_FSP_CAR is enabled. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17063 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-18 22:57:54 +02:00
soc/intel/apollolake: use CAR code coherency for all CAR stages The flush L1D to L2 operation was only being used when loading romstage from bootblock. However, when the FSP-M component is loaded no code coherency actions are taken. I suspect this is because the FSP-M component is larger than the 24KiB L1D and the entry point is early in the image. Thus, when loading the FSP-M component the earlier part of the image is flushed out to L2 in the process of loading the latter part of the component. Also, once verstage is introduced the same code coherency actions need to be taken as well. Therefore, position the apollolake code to handle all these cases. Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14210 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-31 18:38:13 +02:00
romstage-y += car.c
soc/intel/apollolake: Add romstage that calls FSP2.0 driver This romstage is minimalistic. Its goal is to set up some BARs that FSP expects to be set and then invoke FSP driver to train memory. Change-Id: I3fa56aafe99cf6cf062a46dece3a0febeafdbfad Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13805 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-26 02:42:25 +01:00
romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += romstage.c
soc/intel/apollolake: Add basic HECI support Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15 02:16:35 +02:00
romstage-y += heci.c
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
romstage-y += i2c.c
soc/intel/apollolake: group serial console options into one Kconfig Add SOC_UART_DEBUG which does all the appropriate selection of the dependent Kconfig options for seral console. Also provide a default option of it being turned off instead of always selected. Change-Id: I1a6dba9c0072a17859c8f389709afe6fe3b04fac Signed-off-by: Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/13790 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-25 01:49:07 +01:00
romstage-$(CONFIG_SOC_UART_DEBUG) += uart_early.c
soc/intel/apollolake: Add cbmem_top() implementation On Apollolake CPU memory mapping is similar to previous SoC, and we place CBMEM right under TSEG. Change-Id: I606f690449ba98af6e9fc3074d677c7287892164 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13883 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-03 00:09:27 +01:00
romstage-y += memmap.c
soc/intel/apollolake: provide common LPDDR4 memory init Instead of having the mainboards duplicate logic surrounding LPDDR4 initialization provide helpers to do the heavy lifting. It also handles the quirks of the FSP configuration which allows the mainboard porting to focus on the schematic/design. Change-Id: I686eb3097c33399a3b94af89237f7fe1b2d34c2f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14790 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-12 19:43:37 +02:00
romstage-y += meminit.c
soc/intel/apollolake: Update memory HOB info save function SMBIOS memory HOB produced by glk FSP v52_27 has new structure members, which are not available in current apl FSP. New FSP-m header file in https://review.coreboot.org/#/c/20673/ lists new SMBIOS structure members. Break memory HOB save routine into different functions for glk and apl to accomodate new changes. Change-Id: I33c6e4f2842cebbb326b6a05436fa69e3836ffc6 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20674 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-21 00:11:19 +02:00
ifeq ($(CONFIG_SOC_INTEL_GLK),y)
romstage-y += meminit_util_glk.c
else
romstage-y += meminit_util_apl.c
endif
soc/intel/apollolake: Add support for memory-mapped boot media On Apollo Lake SPI flash is memory mapped. The mapping is different to previous platforms. Only "BIOS" region is mapped in contrast to whole flash. Also, the 128 KiB right below 4 GiB are being decoded by readonly SRAM. Fail accesses to those regions, rather than returning false data. Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13706 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13 00:12:43 +01:00
romstage-y += mmap_boot.c
soc/apollolake: Add helper functions to access Power Management Registers Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14289 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-05 05:13:34 +01:00
romstage-y += pmutil.c
soc/intel/apollolake: Add utility functions for global reset Apollolake defines Global Reset where Host, TXE and PMC are reset. During boot we may need to trigger a global reset as part of platform initialization (or for error handling). Add functions to trigger global reset, enable/disable it and lock global reset bit. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-18 00:30:13 +02:00
romstage-y += reset.c
intel/apollolake/spi: Add support for reading status reg spi_read_status reads the status register using hardware sequencing and returns 0 on success and -1 on error. Use spi_read_status to return appropriate value for get_sw_write_protect. BUG=chrome-os-partner:54283 Change-Id: I7650b5c0ab05a8429c2b291f00d4672446d86e03 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15266 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-18 00:50:24 +02:00
romstage-y += spi.c
soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLE Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11 02:47:03 +01:00
soc/intel/apollolake: provide SMM dependency requirements Depending on which options are selected there needs to be certain functions supplied. However, the spi, mmap_boot, and tsc_freq modules were not included in the SMM builds. Fix the omission. Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14977 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 21:22:34 +02:00
smm-y += mmap_boot.c
soc/apollolake: Add helper functions to access Power Management Registers Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14289 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-05 05:13:34 +01:00
smm-y += pmutil.c
soc/apollolake: SOC specific SMM code Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13 09:47:14 +02:00
smm-y += smihandler.c
soc/intel/apollolake: provide SMM dependency requirements Depending on which options are selected there needs to be certain functions supplied. However, the spi, mmap_boot, and tsc_freq modules were not included in the SMM builds. Fix the omission. Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14977 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 21:22:34 +02:00
smm-y += spi.c
soc/intel/apollolake: allow DEBUG_SMI to work The UART support is needed in SMM in order for DEBUG_SMI to function. BUG=chrome-os-partner:54262 TEST=Ran on reef with DEBUG_SMI enabled. Can observed SMI messages. Change-Id: Ibd6b12e27d5776046b400adf72f24133b9e54af8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15151 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-10 22:49:21 +02:00
smm-y += uart_early.c
soc/intel/apollolake: Enable UART debug controller on S3 resume 1. Add a new variable to GNVS to store information during S3 suspend whether UART debug controller is enabled. 2. On resume, read stored GNVS variable to decide if UART debug port controller needs to be initialized. 3. Provide helper functions required by intel/common UARRT driver for enabling controller on S3 resume. BUG=b:64030366 Change-Id: Idd17dd0bd3c644383f273b465a16add184e3b171 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20888 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-05 20:12:44 +02:00
smm-y += uart.c
soc/apollolake: Add skeleton ACPI entry Change-Id: Ib127af5392ca2b349480f5b21fad2186b444d7e6 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13348 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-10 02:06:34 +01:00
ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
soc/apollolake: Enable all CPU cores using the parallel MP lib This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05 06:33:04 +01:00
ramstage-y += cpu.c
soc/intel/apollolake: Add chip initialization Change-Id: I54532b71c7649f7eeccbb2213b31418cfdbfb00c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13911 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-05 06:41:13 +01:00
ramstage-y += chip.c
soc/intel/apollolake: dump CSE status Dump the CSE status registers for potential debugging purposes. Explicitly call out manufacturing mode of the part since it's important shipping devices ensure manufacturing mode is locked down. Intel is planning on writing a common driver so a complete status -> string dumps was not done because (surprise surprise) not all the fields are equal with previous implementations. BUG=chrome-os-partner:62177 BRANCH=reef TEST=Booted and noted dump of CSE status registers. Change-Id: I71d15722bb193877f1569c1d3e7f441302f5bd14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18303 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-07 18:33:56 +01:00
ramstage-y += cse.c
soc/intel/apollolake: Enable ELOG Add in the base for ELOG for APL. Some PM events still need to be added but the basic events are logged here. This enables the basic functionality of ELOG for Apollolake. BUG=chrome-os-partner:55473 BRANCH=none TEST=Verified image boots on Amenia Change-Id: I8682293e5a55b3efb5fdd9f1be1f3e4bf8d0757c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15937 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-19 00:14:12 +02:00
ramstage-y += elog.c
soc/intel/apollolake: Add Audio DSP device Add the Audio DSP device for apollolake as a PCI driver with a static scan_bus handler so generic devices can be declared under it. This is for devices like the Maxim 98357A which is connected on the I2S bus for data but has no control channel bus and instead just has a GPIO for channel selection and power down control and needs to describe that GPIO connection to the OS via ACPI. Change-Id: Icb97ccf7d6a9034877614d49166bc9e4fe659b12 Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/15528 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01 20:53:05 +02:00
ramstage-y += dsp.c
soc/intel/apollolake: Write LB_FRAMEBUFFER table when appropriate FSP does not itself write the LB_FRAMEBUFFER entry, so that needs to be done in platform code. Change-Id: Ia8311da9b9a603ea9b333ea873fc26d11e182332 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14764 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-12-16 01:06:15 +01:00
ramstage-y += graphics.c
soc/intel/apollolake: Add basic HECI support Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15 02:16:35 +02:00
ramstage-y += heci.c
soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
ramstage-y += i2c.c
soc/intel/apollolake: group serial console options into one Kconfig Add SOC_UART_DEBUG which does all the appropriate selection of the dependent Kconfig options for seral console. Also provide a default option of it being turned off instead of always selected. Change-Id: I1a6dba9c0072a17859c8f389709afe6fe3b04fac Signed-off-by: Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/13790 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-25 01:49:07 +01:00
ramstage-$(CONFIG_SOC_UART_DEBUG) += uart_early.c
soc/apollolake: Add lpc device driver A dedicated pci device driver required for LPC devices as the legacy IO range need to be included to avoid IO resource confilict. Blindly set to 0~0x1000 to also avoid the IO resource of COMA/COMB/LPT/FDD and LPC.Without this driver system will have assertion on load RTC DXE driver in UEFI payloads. Change-Id: Icc462c159c2cf39cc1030d55acee79e73a6bfb35 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13356 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-13 03:19:41 +01:00
ramstage-y += lpc.c
soc/intel/apollolake: Add cbmem_top() implementation On Apollolake CPU memory mapping is similar to previous SoC, and we place CBMEM right under TSEG. Change-Id: I606f690449ba98af6e9fc3074d677c7287892164 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13883 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-03 00:09:27 +01:00
ramstage-y += memmap.c
soc/intel/apollolake: Add support for memory-mapped boot media On Apollo Lake SPI flash is memory mapped. The mapping is different to previous platforms. Only "BIOS" region is mapped in contrast to whole flash. Also, the 128 KiB right below 4 GiB are being decoded by readonly SRAM. Fail accesses to those regions, rather than returning false data. Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13706 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13 00:12:43 +01:00
ramstage-y += mmap_boot.c
soc/intel/apollolake: handle p2sb quirks The P2SB device is device 0xd and function 0. If hidden that causes the latter pci devices on function >= 1 to not be probed in the kernel. This is also a problem for coreboot if the P2SB device is hidden by FSP. That means the coreboot driver won't be ran. Therefore, provide hide and unhide functions for the P2SB device. The other quirk is to allow the GPIO devices to work correctly. Those devices are ACPI devices. However, their resources are sub-regions within the P2SB BAR. Sadly, linux doesn't handle ACPI devices being children of PCI devices. This leads to resource conflict errors when the P2SB device is visible. For the time being keep the P2SB device hidden, but also ensure the resources it is using are accounted for and reserved. The fallout of that is the PMC and SPI device are no longer probed by the kernel. BUG=chrome-os-partner:53017 TEST=Ensured P2SB device is visible and pci resources are allocated correctly for the devices. Change-Id: I24e59bbde74310e1ce8425b344a3ad0b88702153 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15530 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-01 23:36:03 +02:00
ramstage-y += p2sb.c
soc/intel/apollolake: Avoid UART BAR relocation at ramstage UART bar gets overwritten during resource allocation stage. As result the serial driver ends up using stale BAR so serial output does not work. This driver simply tells resource allocator not to change BAR of UART device. Change-Id: I81f4f04089106c80bea97f0bbaba890df00c8ac5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13997 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-09 01:12:06 +01:00
ramstage-y += uart.c
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
ramstage-y += nhlt.c
soc/intel/apollolake: Use common systemagent code This patch perform resource mapping for PCI, fixed MMIO, DRAM and IMR's based on inputs given by SoC. TEST=Ensure PCI root bridge 0:0:0 memory resource allocation remains same between previous implementation and current implementation. Change-Id: I15a3b2fc46ec9063b54379d41996b9a1d612cfd2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19 15:08:24 +02:00
ramstage-y += systemagent.c
soc/intel/apollolake: Implement SPI controller driver Implement flash read, write, and erase functionality using the hardware sequencing capabilities of the SOC. Due to changes in hardware requirements, the flash chip must be probed differently than on previous platforms (details explained in comments). Note that this is a minimal implementation, and does not provide all the bells and whistles. Change-Id: I6dcc3bc36dfce61927d126d231a16d485acb1bdc Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-25 00:08:23 +01:00
ramstage-y += spi.c
soc/apollolake: Add helper functions to access Power Management Registers Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14289 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-05 05:13:34 +01:00
ramstage-y += pmutil.c
soc/apollolake: Prevent PMC BAR reassignment during resource allocation Change-Id: Ie8e21e62ecd25f3c620a57c24948411c14c1e111 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11 22:46:28 +01:00
ramstage-y += pmc.c
soc/intel/apollolake: Add utility functions for global reset Apollolake defines Global Reset where Host, TXE and PMC are reset. During boot we may need to trigger a global reset as part of platform initialization (or for error handling). Add functions to trigger global reset, enable/disable it and lock global reset bit. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-18 00:30:13 +02:00
ramstage-y += reset.c
soc/intel/apollolake: Use fixed resource for SRAM and IPC1 Intel telemetry support will require PMC IPC1 and SRAM devices to be operated in ACPI mode. Then using fixed resources on BAR0, BAR1 and BAR2 (PMC only) for those two devices will help the resource assignment in DSDT stage. BUG=chrome-os-partner:57364 BRANCH=None TEST=Boot up into Chrome OS successfully and check with dmesg to see the driver has been loaded successfully without errors. Change-Id: I8f0983a90728b9148a124ae3443ec29cd7b344ce Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16648 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-07 03:15:29 +02:00
ramstage-y += sram.c
intel/apollolake: Calculate BIOS mmap at runtime Instead of hard-coding the BIOS region start and end addresses, read BIOS_BFPREG to determine the base and limit for the mapped BIOS region. BUG=chrome-os-partner:54563 Change-Id: Iddd3d4cc945f09e8f147e293bb9144471a6a220d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15269 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-20 08:20:43 +02:00
ramstage-y += spi.c
soc/intel/apollolake: Move XDCI in its own file Split out dual-port switching functionality into dedicated xdci.c. Change-Id: Ia58fc3fb6d017dd0c19cc450d1caba307fc89a7b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18226 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-25 06:56:36 +01:00
ramstage-y += xdci.c
soc/intel/apollolake: Add PM methods to power gate SD card This implements dynamic generation of sdcard GpioInt in SSDT. GpioInt in SSDT generation is based on the card detect GPIO if it is provided by the mainboard in devicetree. This implements GNVS variable to store the address of sdcard cd pin. GNVS used to store rxstate of the sdcard cd pin to get card presence. Add _PS0/_PS3 methods to power gate the sd card controller in S0ix and runtime PM. CQ-DEPEND=448173 BUG=chrome-os-partner:63070 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should enter S0ix and resume with no issue. Change-Id: Id2c42fc66062f0431385607cff1a83563eaeef87 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/18496 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
2017-02-25 00:37:30 +01:00
ramstage-y += sd.c
soc/intel: Add skeleton infrastructure for Apollolake SOC This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-06 19:33:49 +02:00
soc/intel/apollolake: utilize postcar phase/stage The current Apollolake flow has its code executing out of cache-as-ram for the pre-DRAM stages. This is different from past platforms where they were just executing-in-place against the memory-mapped SPI flash boot media. The implication is that when cache-as-ram needs to be torn down one needs to be executing out of DRAM since the act of cache-as-ram going away means the code disappears out from under the processor. Therefore load and use the postcar infrastructure to bootstrap this process for tearing down cache-as-ram and subsequently loading ramstage. Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14141 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-18 17:19:38 +01:00
postcar-y += memmap.c
postcar-y += mmap_boot.c
intel/apollolake: Calculate BIOS mmap at runtime Instead of hard-coding the BIOS region start and end addresses, read BIOS_BFPREG to determine the base and limit for the mapped BIOS region. BUG=chrome-os-partner:54563 Change-Id: Iddd3d4cc945f09e8f147e293bb9144471a6a220d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15269 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-20 08:20:43 +02:00
postcar-y += spi.c
soc/intel/apollolake: utilize postcar phase/stage The current Apollolake flow has its code executing out of cache-as-ram for the pre-DRAM stages. This is different from past platforms where they were just executing-in-place against the memory-mapped SPI flash boot media. The implication is that when cache-as-ram needs to be torn down one needs to be executing out of DRAM since the act of cache-as-ram going away means the code disappears out from under the processor. Therefore load and use the postcar infrastructure to bootstrap this process for tearing down cache-as-ram and subsequently loading ramstage. Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14141 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-18 17:19:38 +01:00
postcar-$(CONFIG_SOC_UART_DEBUG) += uart_early.c
soc/intel/apollolake: Clean up code by using common CAR init This patch currently contains common CAR initialization required in bootblock phase along with common MSR header - 1. Use SOC_INTEL_COMMON_BLOCK_CAR to have common CAR initialization and CAR teardown. 2. Use common MSR header "intelblocks/msr.h" inside soc/cpu.h Change-Id: I67f909f50a24f009b3e35388665251be1dde40f7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18555 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-03 13:53:59 +01:00
postcar-$(CONFIG_FSP_CAR) += exit_car_fsp.S
soc/intel/apollolake: allow ApolloLake SoC to use FSP CAR Init FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize & tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to ApolloLake SoC when CONFIG_FSP_CAR is enabled. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17063 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-18 22:57:54 +02:00
intel/apollolake: Add car.c to verstage Verstage on apollolake requires the functions defined in car.c to perform flush of l1d to l2 on loading romstage into CAR. Change-Id: I6d9a0b9dfb58c2126ad70172846e90663e588857 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15046 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01 10:55:43 +02:00
verstage-y += car.c
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
verstage-y += i2c.c
soc/intel/apollolake: Add basic HECI support Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15 02:16:35 +02:00
verstage-y += heci.c
soc/intel/apollolake: add support for verstage There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 18:00:44 +02:00
verstage-y += memmap.c
verstage-y += mmap_boot.c
verstage-$(CONFIG_SOC_UART_DEBUG) += uart_early.c
verstage-y += pmutil.c
soc/intel/apollolake: Add utility functions for global reset Apollolake defines Global Reset where Host, TXE and PMC are reset. During boot we may need to trigger a global reset as part of platform initialization (or for error handling). Add functions to trigger global reset, enable/disable it and lock global reset bit. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-18 00:30:13 +02:00
verstage-y += reset.c
intel/apollolake: Calculate BIOS mmap at runtime Instead of hard-coding the BIOS region start and end addresses, read BIOS_BFPREG to determine the base and limit for the mapped BIOS region. BUG=chrome-os-partner:54563 Change-Id: Iddd3d4cc945f09e8f147e293bb9144471a6a220d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15269 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-20 08:20:43 +02:00
verstage-y += spi.c
soc/intel/apollolake: add support for verstage There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26 18:00:44 +02:00
soc/intel/apollolake: Bring in delta for GLK SOC Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-06 01:30:22 +02:00
ifeq ($(CONFIG_SOC_INTEL_GLK),y)
bootblock-y += gpio_glk.c
romstage-y += gpio_glk.c
smm-y += gpio_glk.c
ramstage-y += gpio_glk.c
else
bootblock-y += gpio_apl.c
romstage-y += gpio_apl.c
smm-y += gpio_apl.c
ramstage-y += gpio_apl.c
endif
soc/apollolake: Add initial cache-as-ram setup for bootblock This is the minimum setup needed to both get cache-as-ram setup and a C environment working. On apollolake, we only get 32 KiB of data loaded into an SRAM that is readonly to the main CPU. Due to this restriction we have to set CAR and a C environment very early on. Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13301 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-07 02:16:41 +02:00
CPPFLAGS_common += -I$(src)/soc/intel/apollolake/include
soc/intel/apollolake: Bring in delta for GLK SOC Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-06 01:30:22 +02:00
ifeq ($(CONFIG_SOC_INTEL_GLK),y)
CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp2_0/glk
else
apollolake: relocate fsp header files to vendorcode FSP header files should be located in vendorcode, not soc directory. This patch includes changes any references to the old location to the new location. Change-Id: I44270392617418ec1b9dec15ee187863f2503341 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31 22:46:58 +02:00
CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp2_0/apollolake
soc/intel/apollolake: Bring in delta for GLK SOC Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-06 01:30:22 +02:00
endif
soc/apollolake: Add initial cache-as-ram setup for bootblock This is the minimum setup needed to both get cache-as-ram setup and a C environment working. On apollolake, we only get 32 KiB of data loaded into an SRAM that is readonly to the main CPU. Due to this restriction we have to set CAR and a C environment very early on. Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13301 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-07 02:16:41 +02:00
soc/intel/apollolake: Relocate FSP-M during insertion in CBFS Since FSP-M is run in CAR (as opposed to XIP), its default link address may need to be changed. Since cbfstool can relocate FSP blobs, take advantage of that feature. Change-Id: I4353fe09d785c090843ce25ff4e654d45c64c381 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14866 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-17 09:03:27 +02:00
# Since FSP-M runs in CAR we need to relocate it to a specific address
$(CONFIG_FSP_M_CBFS)-options := -b $(CONFIG_FSP_M_ADDR)
soc/intel/apollolake: add support for writing logical boot partition 2 On apollolake the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. There's also a sort of recovery mechanism where there is a second data structure with similar contents halfway through the "BIOS" region. This second structure is referred as the logical boot partition 2 (LBP2), and it's optionally employed. Add support for writing the LBP2 to a specified FMAP region to accommodate platforms which require it. Change-Id: I1959a790f763b409238dea6b62408b42122e590e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14924 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-20 17:48:44 +02:00
ifeq ($(CONFIG_NEED_LBP2),y)
files_added::
$(CBFSTOOL) $(obj)/coreboot.rom write -r $(CONFIG_LBP2_FMAP_NAME) -f $(CONFIG_LBP2_FILE_NAME) --fill-upward
endif
soc/intel/apollolake: add support for IFWI region On apollolake, the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. This region is referred to as the IFWI. Add support for writing the IFWI to a specified FMAP region to accommodate such platforms. Change-Id: Ia61f12a77893c3dd3256a9bd4e0f5eca0065de26 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14999 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28 21:57:05 +02:00
# Bootblock on Apollolake platform lies in the IFWI region. In order to place
# the bootblock at the right location in IFWI image -
# a. Using ifwitool:
# 1. Create IFWI image (ifwi.bin.tmp) from input image
# (CONFIG_IFWI_FILE_NAME).
# 2. Delete OBBP sub-partition, if present.
# 3. Replace IBBL directory entry in IBBP sub-partition with currently
# generated bootblock.bin.
# b. Using cbfstool:
# 1. Write ifwi.bin.tmp to coreboot.rom using CONFIG_IFWI_FMAP_NAME.
ifeq ($(CONFIG_NEED_IFWI),y)
files_added:: $(IFWITOOL)
$(IFWITOOL) $(CONFIG_IFWI_FILE_NAME) create -f $(objcbfs)/ifwi.bin.tmp
$(IFWITOOL) $(objcbfs)/ifwi.bin.tmp delete -n OBBP
$(IFWITOOL) $(objcbfs)/ifwi.bin.tmp replace -n IBBP -f $(objcbfs)/bootblock.bin -d -e IBBL
$(CBFSTOOL) $(obj)/coreboot.rom write -r $(CONFIG_IFWI_FMAP_NAME) -f $(objcbfs)/ifwi.bin.tmp --fill-upward
endif
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
# DSP firmware settings files.
NHLT_BLOB_PATH = 3rdparty/blobs/soc/intel/apollolake/nhlt-blobs
soc/intel/apollolake: Add support for DMIC 4ch & 1ch Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27 02:31:36 +02:00
DMIC_1CH_48KHZ_16B = dmic-1ch-48khz-16b.bin
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
DMIC_2CH_48KHZ_16B = dmic-2ch-48khz-16b.bin
soc/intel/apollolake: Add support for DMIC 4ch & 1ch Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27 02:31:36 +02:00
DMIC_4CH_48KHZ_16B = dmic-4ch-48khz-16b.bin
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
MAX98357_RENDER = max98357-render-2ch-48khz-24b.bin
DA7219_RENDER_CAPTURE = dialog-2ch-48khz-24b.bin
soc/intel/apollolake: Add support for DMIC 4ch & 1ch Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27 02:31:36 +02:00
cbfs-files-$(CONFIG_NHLT_DMIC_1CH_16B) += $(DMIC_1CH_48KHZ_16B)
$(DMIC_1CH_48KHZ_16B)-file := $(NHLT_BLOB_PATH)/$(DMIC_1CH_48KHZ_16B)
$(DMIC_1CH_48KHZ_16B)-type := raw
soc/intel/apollolake: Use CONFIG_NHLT_DMIC_2CH_16B for dmic Update the config variable that gets set to use DMIC 2 channel blob for intel/apollolake platforms. This flag is set in mainboard. Change-Id: Ic6deb9f08d345cc45351d61a7597bc7075ee20f9 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/16251 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-18 23:08:37 +02:00
cbfs-files-$(CONFIG_NHLT_DMIC_2CH_16B) += $(DMIC_2CH_48KHZ_16B)
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
$(DMIC_2CH_48KHZ_16B)-file := $(NHLT_BLOB_PATH)/$(DMIC_2CH_48KHZ_16B)
$(DMIC_2CH_48KHZ_16B)-type := raw
soc/intel/apollolake: Add support for DMIC 4ch & 1ch Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27 02:31:36 +02:00
cbfs-files-$(CONFIG_NHLT_DMIC_4CH_16B) += $(DMIC_4CH_48KHZ_16B)
$(DMIC_4CH_48KHZ_16B)-file := $(NHLT_BLOB_PATH)/$(DMIC_4CH_48KHZ_16B)
$(DMIC_4CH_48KHZ_16B)-type := raw
soc/intel/apollolake: add initial NHLT support Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21 23:22:16 +02:00
cbfs-files-$(CONFIG_NHLT_MAX98357) += $(MAX98357_RENDER)
$(MAX98357_RENDER)-file := $(NHLT_BLOB_PATH)/$(MAX98357_RENDER)
$(MAX98357_RENDER)-type := raw
cbfs-files-$(CONFIG_NHLT_DA7219) += $(DA7219_RENDER_CAPTURE)
$(DA7219_RENDER_CAPTURE)-file := $(NHLT_BLOB_PATH)/$(DA7219_RENDER_CAPTURE)
$(DA7219_RENDER_CAPTURE)-type := raw
soc/intel: Add skeleton infrastructure for Apollolake SOC This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-06 19:33:49 +02:00
endif
Reference in a new issue Copy permalink