Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add support to set eMMC tuning params from the device tree so that it
can be configured per board.
BUG=b:112718426,b:112690628
BRANCH=none
TEST=Build nocturne image and checked values passed in dev tree is set
by FSP.
Change-Id: Ic71934dce9a1c380a057e579ca3fda41983b9385
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/28274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This change permits the subsystem ID to be specified via Kconfig for the
devices on the SoC.
Some devices are getting zero'ed subsystem IDs because the unset (and thus
zero'ed) config options are overwriting the fsp defaults. With this change
the fsp defaults will only be overwritten by non-zero config values.
Change-Id: I0f7bb8e465f55e5dd6d8e0fad71b9b2a22f089dc
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/27609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Config ISH in SOC side by checking if ISH device is turned on.
"IshEnable" is not needed anymore since ISH device on/off will tell
if ISH should be enabled or not. "IshEnable" will be removed from chip.h
in separate CL.
Atlas board specific ISH setting is needed, which is committed in
separate CL.
BUG=b:79244403
BRANCH=none
TEST=Verified on Atlas board with ISH rework. ISH log showed on console.
Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/26485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
SoC users from IOTG team is looking forward for a solution to skip
coreboot AP initialization flow and make use of FSPS-UPD to
perform AP reset.
TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs
out of reset.
Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
pch lockdown functionality can be used by supported PCH.
Right now pch lockdown functionality is applied for SPT
(Skylake SOC) and CNP(Cannon Lake SOC) PCH.
BUG=b:78109109
BRANCH=none
TEST=Build and boot KBL and CNL platform.
Change-Id: I0b81bbc54f737cb4e7120f44bbe705039b45ccb3
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/25688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Adding common chip config structure which will be used to return data to
common code. When common code requires soc data, code used to fetch
entire soc config structure. With this change, common code will only get
the data/structure which is required by common code and not entire
config.
For now, adding i2c, gspi and lockdown configuration which will be used
by common code.
BUG=none
BRANCH=b:78109109
TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check
values are returned properly using common structure.
Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/26189
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides option for mainboard to skip coreboot MP
initialization if required based on use_fsp_mp_init.
Option for mainboard to skip coreboot MP initialization
* 0 = Make use of coreboot MP Init
* 1 = Make use of FSP MP Init
Default coreboot does MP initialization.
Change-Id: I8de24e662963f4600209ad1b110dc950ecfb3a27
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26818
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After FSP-S, a device on PCI function n will be function swapped
to function 0 if there is no device presnet on function 0.
It needs some modification for DT and causes mismatches between
software configuration and hardware schematic. This patch is
from d779605, which swaps the devfn of the first enabled device
in DT and function 0 resides in a PCI device.
BUG=b:80105785
BRANCH=None
TEST=Make sure the device is still enabled after coalescence with
device on bus 0 and w/o device on bus 0. Test with suspend
and resume and ensure it's consistent.
Change-Id: Ibbc5d6e979977011f5904c8bd4b2f1be16bd23dc
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/26479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use of device_t has been abandoned in ramstage.
Change-Id: Idf00c029331aba30c8bfca71546cad62ff6bb0a7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26541
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Skylake used the inner function, wrapping it in the same set of tests as
the common code does, but expressed differently.
Change-Id: Ifa6912255e7874a6e80301d49128adda6f624209
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/26037
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If the SoC is VT-d capable, write an ACPI DMAR table. The entry for the
GFXVTBAR is only generated if the IGD is enabled.
Change-Id: I8176401dd19aee7ad09a8a145b7a3801fe5b2ae1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
We use the usual static addresses 0xfed90000/0xfed91000 for the GFX
IOMMU and the general IOMMU respectively. These addresses have to be
configured in MCHBAR registers (maybe, who knows, the blob is undocu-
mented), advertised to FSP and reserved from the OS.
The new devicetree option `ignore_vtd` allows to retain the old beha-
viour (do whatever pre-set UPD values suggest).
We also let FSP set up distinct BDFs for messages originating from the
I/O-APIC and the HPET.
Change-Id: I77f87c385736615c127143760bbd144f97986b37
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Use the common xDCI function to check if the controller is allowed
in the current mode before enabling it. Otherwise, disable the
PCI device if it has been enabled in devicetree.
To make the SOC behavior consistent the XdciEnable config option
is removed in favor of direct control by devicetree.cb and the
mainboards that had defined it were adjusted accordingly.
This was tested on an Eve board with xDCI enabled in devicetree.cb
to ensure the xDCI device is enabled in developer mode and disabled
in normal mode.
Change-Id: Ic3c84beac87452f17490de32082030880834501d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/25365
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a variable to fill out the FSP UPD variable for PCIe HotPlug,
which allows a mainboard to enable HotPlug on individual root ports.
BUG=b:72417777
TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux
that it is identified as a HotPlug capable root port.
Change-Id: I6b1f525e41909a3f81984806c4ef20239032c8d6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/23511
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to doc #543977 Power Architecture Guide, PsysPmax is the
maximum platform power. It maps to the full-scale of Psys signal.
This patch adds a "psys_pmax" member in chip information which allows
boards to set up maximum platform power.
BUG=b:71594855
BRANCH=None
TEST=Set "psys_pmax" in device tree & "USE=fw_debug emerge-fizz
chromeos-mrc coreboot chromeos-bootimage" & ensure correct
PsysPmax value is passed to FSP-S through UPD. Verfied on
KBL-R and KBL-U SKUs.
Change-Id: I44f2e2917a8eb9ce3bb69d9c15899d4c7c5b2883
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/23268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change provides option in devicetree and feeds the option to
FSP SataPwrOptEnable UPD for power saving purpose
BUG=b:70491485
Change-Id: I9099c5c97765a118bdee64da303cb3ba6ceb951b
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/23018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
New UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to configure
clock source number of PCIe root ports. This UPD array is set to clock
source number(0-6) for all the enabled PCIe root ports, invalid(0x1F)
is set for disabled PCIe root ports.
BUG=b:70252901
BRANCH=None
TEST= Perform the following
1. Build and boot soraka
2. Verify PCIe devices list using lspci command
3. Perform Basic Assurance Test(BAT) on soraka
Change-Id: I95ca0d893338100b7e4d7d0b76c076ed7e2b040e
Signed-off-by: Divya Chellap <divya.chellappa@intel.com>
Reviewed-on: https://review.coreboot.org/22947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add parameters to configure the integrated LAN via FSP. Since
this takes over a PCI CLKREQ# pin it needs to know which pin
it should use, and there are additional parameters for LTR and
a "K1 power save" feature.
This was tested on a KBL-R board with integrated LAN, verifying
that the device is functional under Linux with the e1000e driver.
Change-Id: Idb200cec90a3c0d4d9c914bae9983a3bcdafcd06
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/22856
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, "tcc_offset" defined in devicetree is overwritten by
Intel FSP-S UPD "TccActivationOffset".
This patch will make "TccActivationOffset" refer to "tcc_offset".
TEST=check if MSR (0x1a2[29:24]) value is updated with "tcc_offset"
by iotools (rdmsr 0 0x1a2).
Change-Id: Ibc6f33bea19a1d59bc7e407815210942b38f0702
Signed-off-by: marxwang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/22818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Intel common PCI driver is handle PCI subsystem ID
programming, hence no need to have an explicit soc
function to do the same.
TEST=PCI subsystem id is getting programming during
pci enumeration.
Change-Id: Iead57a286b26d532e578cfff99f412c23fd4c2fe
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
PCI resources MMIO space/bus master enabling is handled inside
pch_dev_enable_resources() from common device code. Hence
no need to have an explicit soc function to do the same.
TEST=lspci from kernel console shows same pci device list
without and without this patch.
Change-Id: I005e486dd435e9c61ae3f5dfe3ff0e8f688d16e1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The Librem13v2 needs to set this parameter to work around
power-related issues with some SATA devices.
Change-Id: I7fcef36ec8662e18834394b72427a0633c6b7e92
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/22045
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There are a lot errors reported by AER driver for root port 0.
The erors are being caused by an unsupported request from the
device to the upstream port. Enabling LTR on the root port stops
these errors, it is because LTR is enabled on the device side but
not on the root port and hence root port was logging the LTR messages
from the device as unsupported.
The PCIe base spec (v3.1a) section 6.18 also states that:
LTR support is discovered and enabled through reporting and control
registers described in Chapter 7. Software must not enable LTR in an
Endpoint unless the Root Complex and all intermediate Switches indicate
support for LTR. Note that it is not required that all Endpoints support
LTR to permit enabling LTR in those Endpoints that do support it. When
enabling the LTR mechanism in a hierarchy, devices closest to the
Root Port must be enabled first.
If an LTR Message is received at a Downstream Port that does not
support LTR or if LTR is not enabled, the Message must be treated
as an Unsupported Request. FSP has a UPD for enabling/disabling
LTR on root port, use the same for configuring LTR on PCIe root ports.
BUG=b:65570878
TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported
by AER driver for root port 0.
Change-Id: Ica97faa78fcd991dad63ae54d2ada82194b4202a
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/21547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch to provide new config options to perform LPC and SPI
lock down either by FSP or coreboot.
Remove EISS bit programming as well.
TEST=Build and boot Eve and Poppy.
Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The Sideband Acces locking code is skipped from FSP by setting an
FSP-S UPD called PchSbAccessUnlock. This locking is being done in
coreboot during finalize.c.
This is done because coreboot was failing to disable HECI1 device
using Sideband interface during finalize.c if FSP already locks
the Sideband access mechanism before that.
So, as a solution, coreboot passes an UPD to skip the locking
in FSP, and in finalize.c, after disabling HECI, it removes the
Sideband access.
BUG=b:63877089
BRANCH=none
TEST=Build and boot poppy to check lspci not showing Intel ME
controller in the PCI device list.
Change-Id: I8dba4c97480200507969b0f2873337f97bd2ff6a
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
coreboot was setting SPI FPR register to protect the
mrc_cache data range stored in flash. This programming was being done
after FSP Notify 1.
But, FSP was locking the SPI by setting FLOCKDN Bit during Notify
phase 1, due to which coreboot was unable to protect that range.
As solution, FSP introduced a new UPD SpiFlashCfgLockDown to skip
the lockdown of flash on interest of bootloader. Set that UPD to 0
to skip the lockdown of FAST_SPI flash from FSP.
The same is being done from coreboot after end of Post at finalize.c
file.
BUG=b:63049493
BRANCH=none
TEST=FPR can be set properly to protect the mrc_cache range. The
issue reported in the bug doesn't come when both software and
hardware WP is enabled with this patch.
Change-Id: I3ffca2f1b05ab2e4ef631275ef7c3a6e23e393aa
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP disables host access to shadowed PMC XRAM registers by default,
it also provides a UPD to enable/disable host reads to these regiters.
Expose the same in devicetree as a config option.
Change-Id: Iaa33aa3233bda4f050da37d1d8af0556311c9496
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18319
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fix the following errors and warnings detected by checkpatch.pl:
ERROR: code indent should use tabs where possible
ERROR: Macros with complex values should be enclosed in parentheses
ERROR: "foo * bar" should be "foo *bar"
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '=' (ctx:VxW)
WARNING: space prohibited between function name and open parenthesis '('
WARNING: storage class should be at the beginning of the declaration
WARNING: char * array declaration might be better as static const
WARNING: please, no space before tabs
WARNING: braces {} are not necessary for single statement blocks
WARNING: else is not generally useful after a break or return
WARNING: static const char * array should probably be static const char * const
TEST=Build for glados
Change-Id: Ic14ca3abd193cfe257504a55ab6b74782b26bf6d
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18868
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add options to the skylake chip config that will allow tuning the
various settings that can affect acoustics with the CPU and its VRs.
These settings are applied inside FSP, and they can adjust the slew
slew rate when changing voltages or disable fast C-state ramping on
the various CPU VR rails.
BUG=b:35581264
BRANCH=none
TEST=these are currently unused, but I verified that enabling the
options can affect the acoustics of a system at runtime.
Change-Id: I6a8ec0b8d3bd38b330cb4836bfa5bbbfc87dc3fb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18662
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Support for voltage margining is dependent on the platform.
Enabling voltage margining puts additional constraints for
the SLP_S0# to be asserted and hence moving to S0ix state.
If the platform PMIC/VR supports PCH voltage reduction,
voltage marigining can be enabled.
Use the UPD provided by FSP to enable/disable voltage margining.
Change-Id: Iea214e9d7d6126e8367426485c6446ced63caa66
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18469
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Camera and Imaging device should be enabled for camera usecase,
FSP provides a UPD to enable/disable the SA IMGU (Imaging Unit)
expose the same as a config option in devicetree.cb
Also remove a redundant assignment for PchCio2Enable.
BUG=None
BRANCH=None
TEST=lspci should list 00:05:00
Change-Id: I4cf7daf41bfaf4dcba414921cac2e7e12bf89f37
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18365
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
With recent change (a4b11e5c90: soc/intel/skylake: Perform CPU MP Init
before FSP-S Init) to perform CPU MP init before FSP-S init, suspend
resume is currently broken for all skylake/kabylake boards. All the
skylake/kabylake boards store external stage cache in TSEG, which is
relocated post MP-init. Thus, if FSP loading and initialization is
done after MP-init, then ramstage is not able to:
1. Save FSP component in external stage cache during normal boot, and
2. Load FSP component from external stage cache during resume
In order to fix this, ensure that FSP loading happens separately from
FSP initialization. Add fsp_load callback for pre_mp_init which ensures
that the required FSP component is loaded/saved from/to external stage
cache.
BUG=chrome-os-partner:63114
BRANCH=None
TEST=Verified that 100 cycles of suspend/resume worked fine on poppy.
Change-Id: I5b4deaf936a05b9bccf2f30b949674e2ba993488
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18414
Tested-by: build bot (Jenkins)
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There is an enable_s0ix config option in the devicetree that should
be used to disable it when not set:
- do not export C8/C9/C10 C-states in _CST
- do not enable SLP_S0 in FSP
BUG=chrome-os-partner:58666
TEST=test on eve board to ensure that OS only sees 3 ACPI C-states
instead of 6 and that it no longer attempts to enter C10
Change-Id: I90e4dc776d1d17d0b700cda63c8476786cd2e4ff
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18394
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
As per BWG, CPU MP Init (loading ucode) should be done prior
to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry
(before FSP-S call).
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Boot to OS with all threads enabled.
Change-Id: Ia6f83d466fb27e1290da84abe7832dc814b5273a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18287
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This reverts commit 32997fb0bc.
This change is breaking I2S audio on Kabylake platforms so
revert the change to fix audio.
BUG=chrome-os-partner:61548,chrome-os-partner:61009
TEST=manual testing on Eve P1 system
Change-Id: I3212c8be83078ed57e38501386605e67b87d5bd0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18360
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
As per Audio PCH team recommendation the iDisplay Audio/SDIN2
should be disabled to bypass InitializeDisplayAudio() function
call. Display Audio Codec is HDA-Link Codec, which is not
supported in I2S mode
BUG=chrome-os-partner:61548
BRANCH=none
TEST=Tested to verify that InitializeDisplayAudio() does not
get called.
Change-Id: Ie0771a8653821e737d10e876313917b4b7c64499
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18091
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The FSP 2.0 change broke the logic for determining whether or not
to execute the GOP binary. Modify the FSP 2.0 code to do the right
thing and check for display_init_required() before passing VBT into
FSP and the GOP binary.
BUG=chrome-os-partner:61726
TEST=disable developer mode and ensure FSP does not run GOP
Change-Id: I7fc8055b6664e0cf231a8de34367406eb049dfe1
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18084
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Instead of having callers query the romstage handoff resume
status by inspecting the object themselves add
romstage_handoff_is_resume() so that the same information
can be queried easily.
Change-Id: I40f3769b7646bf296ee4bc323a9ab1d5e5691e21
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17647
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In FSP 2.0 the UPD to send extra VR Mailbox commands is switched from
SendVrMbxCmd to SendVrMbxCmd1. Use the same in silicon initialization.
Change-Id: I46bd50c9acc0456e2483f20ccb5e9ec2a0de232a
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/17578
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Legacy PME are enabled by default in FSP UPD region.
When Legacy PME is enabled, then an SCI is generated and should be
handled by OS and BIOS/Coreboot in collboration. OS requires some
ACPI methods (eg _L69) which help to determine the wake source and also
to clear some registers. But this infrastructure is not present as of
now in coreboot and also linux handles PMEs natively.
Hence the SCI was never handled by OS and the status bits were never
cleared i.e., PCI_EXP_STS.
For this reason the level triggered SCI will remain active and the
system will wake up as soon as it enters S3.
To fix this, diabled Legacy PME (PmSci for Root ports).
Change-Id: I61317eb45305bdb14be3cc1a54fd9961d6ed593e
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17553
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Stage cache will save ~20ms on S3 resume for apollolake platforms.
Implementing the cache in ramstage to save silicon init and reload
it on resume. This patch adds passing S3 status to silicon init in
order to verify that the wake is from S3 and not for some other
reason. This patch also includes changes needed for quark and
skylake platforms that require fsp 2.0.
BUG=chrome-os-partner:56941
BRANCH=none
TEST=built for reef and tested boot and S3 resume path saving 20ms
Change-Id: I99dc93c1d7a7d5cf8d8de1aa253a326ec67f05f6
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/17460
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
