Meteor Lake Firmware Support Package (FSP-M) for ChromeOS includes an
pre-memory graphics driver which can be leveraged to display a text
message thanks to the following FSP-M UPD (Updateable Product Data):
- VgaInitControl (bitfield):
Bit 0: Turn on graphics, setup VGA text mode and display
`VgaMessage' text centered on the screen.
Bit 1: Clear text and tear down VGA text mode and graphics before
returning from FSP-M.
- VbtPtr (address): Pointer to the VBT (Video BIOS Tables) binary.
- VbtSize (unsigned int): Size of the VBT binary.
- LidStatus (boolean): Due to limited resources at early boot stages,
the text message is displayed on a single monitor. The lid status
helps decide which display is the most appropriate.
0: Lid is closed: show the text message on the external display if
available, do not display anything otherwise.
1: Lid is open: show the message on the internal display if
available, use an external display if available otherwise.
- VgaMessage (string): Text message to display.
If the `SOC_INTEL_METEORLAKE_SIGN_OF_LIFE' flag is set, coreboot
configures the UPDs above to display a text message during memory
training and CSME update. The text message can be configured via the
locale text mechanism using the `memory_training_desc' name.
The `SOC_INTEL_METEORLAKE_SIGN_OF_LIFE' selects the LZ4 compression
algorithm for VBT because LZMA decompression is not available in
romstage by default and adding LZMA support increases the romstage
binary size more than the VBT binary is reduced.
BUG=b:279173035
TEST=Text message is displayed during memory training on a rex board
Change-Id: I8e7772582b1895fa8e38780932346683be998558
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78244
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
This patch adds a function to check if a CSE FW update is required
during this boot. The function is expected to be used during use
cases like Pre-Memory Sign of Life text display to inform user of
a CSE Firmware update.
Bug=279173035
TEST=build and boot on google/rex board. Call the function in romstage
and confirm it returns True during CSE FW update and False otherwise
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: If5fae95786d28d586566881bc4436812754636ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78243
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
By default MarginLimitCheck and RMC UPDs are enabled in FSP
which enables fast and cold boot retraining causing the
boot time increase. So, disabling the same UPDs to fix it.
Change-Id: Ib15d37dbe177f31590f23de4e239a2e82abf1335
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
CLKREQ programming as currently implemented is completely dependent on
FSP DXIO descriptors, so move under common/fsp/pci and rename the
Kconfig to reflect the move.
TEST=build google/{guybrush, skyrim, myst}
Change-Id: I87b53d092ddc367b134c25949f9da7670a6a1d88
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Function 0 of the devices that have the bridges to other buses are dummy
functions that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on those devices isn't
enabled. Those dummy device functions are however not PCI host bridges,
so change the comments from 'Dummy Host Bridge' to 'Dummy device
function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ibddfdf558d84bc44434d718b86f41bd06044b22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Add defaults for the CONSOLE_UART_BASE_ADDRESS Kconfig symbol so that
the SeaBIOS payload will know where the MMIO address of the UART is to
build successfully without any additional user input during the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia05c3531cdbf3fd3e2e5f81b9d652f9dfef2111a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79395
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Update BND_NORTH_APB2_S's domain 5 permission to allow the access from
APU. The APU requires certain information saved in BND_NORTH_APB2_S for
voltage tuning. If this information cannot be retrieved, the APU may
operate at a high frequency with low voltage. Consequently, the APU may
not function as expected.
Change-Id: I967b138dc5517e54da7fbf94b9e502e478c991b5
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79348
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures that the LidStatus UPD is passed a dynamic value,
rather than always passing 1 (CONFIG_RUN_FSP_GOP enabled) for FSP 2.0
devices.
Problem statement:
* FSP-S GFX PEIM initializes the on-board display (eDP) even when the
LID is physically closed, because LidStatus is always set to 1.
* FSP-S skips external display initialization even when the LID is
closed.
Solution:
* FSP-S GFX PEIM module understands the presence of an external display
if LidStatus is not set, and tries to probe the other display
endpoint.
* Statically passing LidStatus as always enabled (aka 1) does not
illustrate the exact device scenarios, so this patch updates
LidStatus dynamically by reading the EC memory map offset.
BUG=b:313886118
TEST=Able to build and boot google/marasov to redirect the display
using external HDMI monitor while LID is closed.
Change-Id: Idb1d71bd54837630f36d43a45effc53d35f9cb70
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79352
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds compilation flags to BL31 to support loading
OP-TEE via an SMC from rootfs. This patch also reserves 80MB memory
space for running the OP-TEE image.
BUG=b:246837563
TEST=emerge-geralt coreboot
Change-Id: Ic38c8beb59c090ae56c5be6821dd8625435609e9
Signed-off-by: Kiwi Liu <kiwi.liu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78801
Reviewed-by: Kiwi Liu <kiwi.liu@mediatek.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The only thing romstage needs to do is find cbmem_top.
TESTED: reaches ramstage.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic2837c4a2b0ec8dcd9dd99602f9c073999c36139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76514
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Select PSP_VERSTAGE_MAP_ENTIRE_SPIROM in Cezanne Kconfig instead of
common Kconfig.
BUG=None
TEST=Build BIOS image and boot to OS in dewatt.
Change-Id: I476971700824fed06d17000001afc075105fa1ee
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79306
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Earlier entire SPI ROM was mapped to memory. With limited TLB resources
in PSP, this approach hit the limit on systems using 32 MiB SPI ROM.
Therefore regions in SPI ROM were mapped on need basis. This works well
on Picasso, Mendocino and Phoenix SoCs. But unfortunately this causes
boot hangs in Cezanne SoC. Add a configuration to map the entire SPI ROM
and enable it in Cezanne SoC. For other SoCs, keep the configuration
disabled so that only the required SPI ROM region is mapped.
BUG=b:309690716
TEST=Build and boot to OS in both Dewatt and Skyrim.
Change-Id: I166ac7b50b367c067e1a743fc94686e69dd07844
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This follows commit c79e96b4eb which did the rename across the tree
except in these places. Remove the flag from CHROMEOS abuild builds
because it never really belonged there.
Change-Id: If98fa27f64d6b676d3edf68ba6fbaacf7ac422e4
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79258
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Also update the regular expression to find the genoa blobs.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iba0109c049019a22cba1e0358cedbd9c198c6569
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The Genoa SoC has 6 I2C controllers. In order to support those, select
SOC_AMD_COMMON_BLOCK_I2C and implement the SoC-specific functions and
data structures needed by the common AMD I2C code. Since the common AMD
I2C code also reports if the controller is enabled or not in the SSDT,
change the corresponding DSDT code to use this information. In this
patch the I2C pad control registers don't get configured by coreboot yet
and we rely on ABL already having those set up correctly which seems to
be an assumption that the reference firmware is making too. PPR #55901
Rev 0.26 was used as a reference for the I2C controllers and the GPIO
pins being used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iebc10de6ea5c6d441cff04e016dcec62405078c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
This patch guarantees that non-ChromeOS platforms continue to enable
early caching.
ChromeOS devices, on the other hand, control this configuration through
the motherboard configuration based on the underlying SoC.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex.
Change-Id: I412b2b6a807dc0f5f2632f0fbd56bd37689dead3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
We need to increase romstage size a little to make a compiler upgrade
fit (CB:70771). Unfortunately the end of the romstage directly touches
the QCSDI region in the current memlayout, and there is no other way
to reshuffle things to make more space... so we need to move QCSDI out
of the way. This means that anyone who is actually building this
platform with CONFIG_QC_SDI_ENABLE (which requires a proprietary blob
that's not publicly available) will need to recompile their QCSDI binary
to match the new start address.
Change-Id: Iaf13e4001b3c763e3ec59009779931ec75603d5d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79074
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Building coreboot for the Qualcomm SoCs SC7180 and SC7280 requires to
include the Qualcomm blobs, which requires to accept their license.
However, for various reasons it makes sense to build without blobs, e.g.
static analysis or just build-testing.
So in order to do that, run the steps integrating the Qualcomm blobs
into the coreboot binary only if USE_QC_BLOBS is enabled and also remove
guards which prevent building related mainboards when USE_QC_BLOBS is
not enabled.
Change-Id: I249ac477b8f10e7fa0848e967c23a3b3b9bbd27d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79026
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds asl code for MMIO device like I2C, UART, GPIO etc.
Change-Id: Ic5bc2cc0141e9da7e2c6ed7691188d7c94b6b1e3
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>t show
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78895
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some functions in the headers for sc7180 and sc7280 specified the
int as their return type when they should have used enum cb_err.
Found while testing GCC 13.2.0
Change-Id: I41331fe708a396f7f2f40359e8ba03c8a46a4d4b
Signed-off-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The THRM and SATA PCI devices do not currently have any ACPI devices
defined, so drop them from soc_acpi_name() so they do not end up in
the LPI constraint list. This eliminates the following errors
under Linux:
AE_NOT_FOUND: _SB_.PCI0.THRM
AE_NOT_FOUND: _SB_.PCI0.SATA
TEST= build/boot google/hatch (jinlon) and verify no ACPI errors.
Change-Id: I3827b152644e2eaecc1ad288d441d2dad4d76ccb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79013
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch uses AMD SoC common code for MCA and adds MCA bank
information as per Genoa Processor Programming Reference (PPR)
version 0.25 (#55901) and uses AMD SoC common code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If728d803d600f7e86507cd1b35b40022bf4d379e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76524
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All CPUs properly come out of reset and relocate SMM.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I8c2d976addacd5a2ba70eb629510128853b9f847
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Default value of HEAP_SIZE is 0x100000, since genoa has a lot of
CPU increase the HEAP_SIZE to 0x200000
Change-Id: Idd707200fe72730849267cd3cafc40e44f1f8c5d
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This is a fixup to CB:78914 which inadvertently broke the RK3288 SoC.
Unfortunately we can only accommodate very little PRERAM_CBFS_CACHE in
the tiny SRAM for that chip, so we would not be able to map an entire
FMAP. Solve this problem for now by mapping less space when CBFS
verification is disabled, and disallowing CBFS verification on that SoC.
Change-Id: I2e419d157dc26bb70a6dd62e44dc6607e51cf791
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
RK3288 is bursting at the seams again. This patch reshuffles two more
kilobytes to verstage to make things fit a little better.
Change-Id: I5e7667061dce3d02441be83c0b8fb81500a1b1a3
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78970
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Client FSP for Raptor Lake-S is present on the Intel FSP repository,
so there is no need to restrict Raptor Lake-S FSP binary repository to
IoT only.
TEST=Build and boot MSI PRO Z790-P
Change-Id: I77aecd6e2d753732bf6358afe2c7ea0491348387
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Eric Lai <ericllai@google.com>
The combination of SOC_INTEL_RAPTORLAKE_PCH_S and FSP_TYPE_IOT is
currently broken. By default, e.g. for MSI PRO Z790-P, the
FSP_HEADER_PATH does not match the default FSP_FD_PATH. For headers
the client FSP is selected, while for the FD file, IoT FSP binary
is chosen. The order of default for both headers and FD file must be
the same to match the headers and binaries.
TEST=Build default MSI PRO Z790-P config and see that FSP_HEADER_PATH
matches FSP_FD_PATH FSP variant-wise.
Change-Id: I8db5ea10c2986ff8d3fa7d616b3f1617d05f0260
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78410
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Dynamic Tuning Technology (DTT) device IRQ is not programmable and
is INT_A/PIRQ_A (IRQ 16).
Reference: Meteor Lake U/H and U Type4 External Design Specification
External Design Document (657165)
TEST=Linux driver successfully uses IRQ 16 on rex. Without this patch
it was binding IRQ 18 but interrupts were going to IRQ 16.
Change-Id: I2cbb9dd41f27c40a29346be325bb9c46d1061afb
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Rename AZALIA_PLUGIN_SUPPORT to AZALIA_HDA_CODEC_SUPPORT and add a help
text to this Kconfig option to clarify what this option is about.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71e36869c6ebf77f43ca78f5e451aebfb59f1c74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Having a separate romstage is only desirable:
- with advanced setups like vboot or normal/fallback
- boot medium is slow at startup (some ARM SOCs)
- bootblock is limited in size (Intel APL 32K)
When this is not the case there is no need for the extra complexity
that romstage brings. Including the romstage sources inside the
bootblock substantially reduces the total code footprint. Often the
resulting code is 10-20k smaller.
This is controlled via a Kconfig option.
TESTED: works on qemu x86, arm and aarch64 with and without VBOOT.
Change-Id: Id68390edc1ba228b121cca89b80c64a92553e284
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55068
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
There's no reason to name this choice block. Remove the name.
Change-Id: Iebf8b1e7af928b988ab514d9dd85d2e70bf00c09
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78917
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop the hda_soc_ssdt_quirks function since it doesn't apply for any of
the SoCs supported by the Stoneyridge code which was the only SoC
implementing it. This code was added when commit 91a7abf25c
("soc/amd/hda: Move HDA PCI device from DSDT to SSDT") rewrote the code
originally added in commit 1587dc8a2b ("soc/amd/stoneyridge: Add
northbridge support") as a copy from northbridge/amd/pi/00670F00. This
code was moved around in commit 6580408a7e ("amd/pi/hudson: Move audio
to northbridge"), since the HDA controller was moved from the FCH to the
northbridge complex. When the controller was moved, the PCI config space
interface also changed, so those bits are no longer the DisableNoSnoop,
DisableNoSnoopOverride, and EnableNoSnoopRequest bits of the Misc
Control register of the HDA controller, but some bits within the
ClassCodeW field of the ACGAZ Mirrot Reg Ctrl 0 register.
BKDG #55072 Rev 3.04 (Stoneyridge), BKDG #50742 Rev 3.08 (family 15h
model 60h-6fh / 00670F00), and BKDG #52740 Rev 3.05 (family 16h model
30h-3fh) were used as a reference. Only the SoC with BKDG #52740 still
has the HDA controller in the FCH; the other two have it in the
northbridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77fc76752b1c7de62ba8a196f15c198f55be3074
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78940
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 44a48ce7a4.
Reason for revert: It breaks wakeup from suspend on a bunch of boards.
While this approach of eyeballing "correct" values by chipset _should_
be fixed, it should also be accompanied by compile time verification
that the memory map works out.
Since nobody seems to care enough, let's just revert this, instead of
keeping the tree broken for a bunch of configurations.
Change-Id: I3cd73b6ce8b15f06d3480a03ab472dcd444d7ccc
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78850
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8dc93b12b81abee41f6f225f41d1f9953d1d93e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
All base addresses of MMIO devices in the devicetree should also have
corresponding defines in iomap.h. PPR #55901 Rev 0.26 was used as a
reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0444e6cc0587b484a4a1ff49fa4b1540a24c8e80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78897
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The base addresses of I2C 5 and I3C 3 were wrong and all I3C controllers
should use the base address of the 4kiB block where all registers of
that I3C controller are located in. PPR #55901 Rev 0.26 was used as a
reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1c983d4a709000ef7963b96228322603b98728aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
After CB:78800 applied, the bootblock increases 2128 bytes and exceeded
its allotted size (40K). Therefore, we enlarge BOOTBLOCK to 44K to solve
the compilation error. This patch also increases PRERAM_CBFS_CACHE to
103K to fill the empty space (1K) between TIMESTAMP and TTB.
BRANCH=none
BUG=none
TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -B
Change-Id: Iae9d44939b29098e823508dd3965a1bae7a69041
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Change-Id: I30e4b02a9ca6a15c9bc4edcf4143ffa13a21a732
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78799
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
To get tracehub working, it requires few settings such as
SOC_INTEL_METEORLAKE_DEBUG_CONSENT=2 and enable tracehub device in
dev tree. This commit binds all tracehub related settings to Kconfig,
so that users only need to enable SOC_INTEL_COMMON_BLOCK_TRACEHUB
TEST=boot on screebo and test tracehub device exists and working
Change-Id: Ie830fe2fd38e3456497bea37fe42ca60d26ca305
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Add an entry in the min_pci_sleep_states array for SA_DEVFN_DPTF,
to correct warning in cbmem log:
[WARN] unknown min d_state for PCI device 00:04.0
TEST=build/boot google/brya (banshee), verify warning not present in
cbmem log, verify entry for DPTF device in ACPI LPI constraint list.
Change-Id: I2a9976b065f08e4acd31c3deca13c5278f031a90
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78877
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Indicate FSP has support to display logo when graphics initialization is
done in FSP.
BUG=b:294055390
TEST=Build and boot to OS in Skyrim with and without passing the BMP
logo buffer from coreboot.
Change-Id: I6112c03723dcbc34cb0f57c400f831c765b95115
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78882
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 2bc9cee0f7 ("Braswell: Update the ACPI tables") switched the
SoC from using its own HPET generation code to the common x86 code, but
along the way the min_tick value got lost. Restore the original value
prior to the above commit, which is now set via a Kconfig override.
TEST=build/boot google/cyan (edgar), verify min_tick value in HPET
ACPI table is correct.
Change-Id: I2633e7cd0c3d74c1554ae8c1f2bb6387fd6dde2b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78744
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, there are 3 separate settings for DPTF which are not always
in sync:
- the enabled/disabled state of the devicetree PCI device
- the 'dptf_enable' register, which sets the ACPI device status via GNVS
- the 'DptfDisable' register, which sets the FSP UPD of the same name
To make things sane, drop the two chip registers, and set the GNVS
variable and FSP UPD based on the enabled/disabled status of the DPTF
PCI device in the mainboard's devicetree.
TEST=build/boot google/cyan (edgar). Verify that the PCI and ACPI
devices are present/enabled when DPTF is enabled in devicetree, and not
present/disabled when disabled in devicetree.
Change-Id: I8fc1b63eda0dc2e047d9cb1e11a02d41ab8b2ad7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The device name for the SA thermal/DPTF PCI device was missing from
soc_acpi_name(), leading to an invalid PLI device constraint entry
being generated in the SSDT (the name field was blank/missing).
Add the missing entry, matching the name to the existing ACPI
device.
TEST=build/boot Win11 on google/puff (wyvern) without a BSOD.
Change-Id: I7ac03fd292246981f32d9ad894b8f0f9870240fc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78869
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
