IMD provides support for small and large allocations. Region IMD Small memory is 1 KB
with 32 Bytes alignment, this region holds smaller entries without having to reserve a
whole 4 KB page. Remaining space is assigned to IMD Large to hold various regions with
4 KB alignment.
The UCSI kernel (kernel version 4.19) driver maps the UCSI_ACPI memory as not cached.
Cache mapping is set on page boundaries and all IMD Small is within the same page.
If another driver maps the memory as write-back before the UCSI driver is loaded then
the UCSI driver will fail to map the memory as not cached.
Placing UCSI_ACPI in IMD Large region will prevent this mapping issue since it will
now be located within its own page. This patch will force UCSI_ACPI region to be
located in IMD Large region.
BUG=b:144826008
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Id00e76dca240279773a95c8054831e05df390664
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38414
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates pci dev definition according to TGL EDS.
Add GSPI3 case in chip.c according to updated pci dev definitions.
Reference
TGL Process EDS#575681 rev1.0
TGL PCH EDS#576591 rev1.2
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4717ac3cc877b13978b18ada504740512f10c709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38341
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When a VBOOT enabled system is used without ChromeOS it may be valid to
allow the UDC independent of the vboot state.
Provide the option to always allow UDC when CHROMEOS is not selected.
BUG=N/A
TEST=build
Change-Id: I6142c4a74ca6930457b16f62f32e1199b8baaff8
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tigerlake SoC doesn't have GPIO defined for GPP_G. so compilation is
failing due to this.
We will update correct gpio for sd card detect once we have Jasper Lake
soc gpio patch.
partner bug for tracking: https://ticket.coreboot.org/issues/251
BUG=None
BRANCH=NONE
TEST='jslrvp' mainboard builds successfully
Change-Id: I097b2f3a4fef1a487495a4aa9d2bcf88aa64f017
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Code in SMM segment using cmos_post_code will give compiler error since
cmos_post_code function is not getting compiled during SMM stage.
Also as per patch discussion, CMOS uses a split IO transaction and it's not
really safe to call cmos_post_code from SMM context. Thus we'll hide the
call for SMM context.
Change-Id: Iffdcccaad48e7ad96e068d07046630fbe4297e65
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Use 'irremovable' over 'unremovable'
Change-Id: Id305dbe56a93740abc49d85d11402d1b63989dad
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37527
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Base on USB SI report to fine tune the strength and correct
some OC pin settings.
BRANCH=none
BUG=b:147206010
TEST=build and test all usb ports function work fine.
Change-Id: Idbee5cdddf3a83f97109214a95e0f9875b3b3f8f
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
It was never filled it, it probably never will be filled in, so stop
the pretense.
Change-Id: I7632b763b8518304d36a818ce262cc127f95b9f0
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Read the CPU temperature from the EC.
For this board the EC support is limited to reading the CPU temperature
sensor at this moment. Events are not supported.
BUG=N/A
TEST=tested on facebook monolith using acpidbg
The TSR0._TMP method is returning the correct values.
Change-Id: I6793070602e253f1e15cfc641bb47d25d269b136
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
When vboot was first integrated into CBFS it was still part of Google
vendorcode. So to not directly tie custom vendorcode into the core CBFS
library, the concept of cbfs_locator was introduced to decouple core
code from an arbitrary amount of platform-specific implementations that
want to decide where the CBFS can be found.
Nowadays vboot is a core coreboot feature itself, and the locator
concept isn't used by anything else anymore. This patch simplifies the
code by removing it and just calling vboot from the CBFS library
directly. That should make it easier to more closely integrate vboot
into CBFS in the future.
Change-Id: I7b9112adc7b53aa218c58b8cb5c85982dcc1dbc0
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch removes the CBFS locator override for the Apollolake SoC and
instead integrates the extra sanity check it was used for straight in
the boot device initializer.
Change-Id: Iccdb885be233bb027a6a1f2cc79054582cbdf3fc
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Update the IccMax for the SYSTEM_AGENT and IA_CORE power supplies
according to the information in the schematic. The IccMax for these
supplies is lower than the standard supported by the SoC.
BUG=N/A
TEST=build
Change-Id: I20b92e7dfc85427bcf9cb9f0efda02459c862809
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Provide Puff with it's own copy of ec.h copied from the
baseboard/includes however with the battery, lid and ps2
defines stripped.
This is to ensure the correct ASL is generated so that we don't
advertise PS2 keyboard support and battery/lid interrupts which
don't exist.
V.2: drop EC_ENABLE_ALS_DEVICE as well.
V.3: set MAINBOARD_EC_SMI_EVENTS to 0 and drop
EC_HOST_EVENT_LID_CLOSED smi event.
V.4: drop EC_HOST_EVENT_MODE_CHANGE &&
provide wake pin for EC for _PRW WoL method
V.5: drop EC_HOST_EVENT_KEY_PRESSED
BUG=b:147850335
BRANCH=none
TEST=builds
Change-Id: If13bd124c7229ced996efb841980604d13be09af
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
By grouping the spi flash parts by their {vendor, sector topology}
tuple one can use a common probe function for looking up the part
instead of having per-vendor probe functions. Additionally, by
grouping by the command set one can save more space as well. SST
is the exception that requires after_probe() function to unlock the
parts.
2KiB of savings in each of verstage, romstage, and ramstage
on Aleena Chrome OS Build.
Change-Id: I9cc20ca0f3d0a1b97154b000c95ff2e7e87f3375
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
To further drive to a common approach for describing the spi flash
parts in the drivers add spi_flash_part_id object. All the drivers
are updated to utilize the new object. Additionally, the driver_private
is also not needed in the spi_flash object.
A Chrome OS build of Aleena provides 960 byte saving of text. A subsequent
patch will save more memory.
Change-Id: I9c0cc75f188ac004ab647805b9551bf06a0c646b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
There was code to handle the case of continuation bytes for identifying
the manufacturer id to a jedec rdid command. However, all the parts that
currently supported have this defined to be 0. Remove the unused
continuation byte support.
Change-Id: Ia7c63162e4ef9dc46ef916ca8c31ebd721cbeca7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38361
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch moves common pch code SOC_INTEL_COMMON_BLOCK_THERMAL Kconfig selection
into SoC specific Kconfig selection as PCH thermal device is not available
with latest PCH (i.e. TGP and JSP).
Also added TODO for TGL thermal configuration as applicable.
TEST=Able to build and boot TGL RVP with this CL
Change-Id: Ibce17cc9f38fb666011ccd8f97bee63033ff5302
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38444
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The adesto, amic, atmel, and stmicro spi flash drivers didn't have
the status() call back. These parts do support the status command
retrieval. Fill them in accordingly.
Change-Id: Ie0e63bec844b8e01e292ef8c4df707494df02e69
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Put the write protection into its own object. This allows
for easier future reuse of objects in future consolidation
patches. It's also possible to eliminate the code implmementing
these in the future if the platform doesn't require it. For now
leave current behavior as-is.
The names of the callbacks were shortened as they are now in
the spi_flash_protection_ops object which is a new field in the
spi_flash object.
Change-Id: I2fec4e4430709fcf3e08a55dd36583211c035c08
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
spi_flash_erase() and spi_flash_write() already assume their
respective callbacks are supplied in the spi_flash_ops object.
Make the same assumption in spi_flash_read(). In order to do this
the spi_flash_ops objects from the drivers need to reference the
the previously used fallback read command, spi_flash_read_chunked().
This function is made global and renamed to spi_flash_cmd_read() for
consistency.
By doing this further dead code elimination can be achieved when the
spi flash drivers aren't included in the build.
A Hatch Chrome OS build achieves a further text segment reduction of
0.5KiB in verstage, romstage, and ramstage.
Change-Id: I7fee55e6ffc1983657c3adde025a0e8c9d12ca23
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch doesn't change the resulting binary of a timeless build.
Change-Id: Ife0e70699df3efa162f8f6c0fd8c2928887fda2d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is to get a uniform format that matches the macros added in the
next patch, so that said follow-up patch won't change the output binary.
lenovo/x230 still boots with this patch.
Change-Id: Ibfbeb847cab09427a57bef3cbd2069036de5a21e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
LDN 0xf keeps registers with open-drain configuration of the GPIO.
Enabling the LDN is required for proper GPIO soft reset operation
by the SuperIO driver.
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia769e3d8e66015297942bddf328a6fde0bb27ce6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
So far, only hard power off could reset GPIOs state to defaults:
IN, Open-drain. Now, defaults are set with every boot to ensure
that GPIOs are not in unknown/unwanted state.
Change-Id: I67878dbab2ddf0deaaa8f5d79416368c6164ba1d
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The fast spi driver implements hardware sequencing which abstracts away
the underlying spi flash commands in the hardware block. It also has its
own spi flash probe function to intercept the spi flash ops. As such it's
not necessary to include all spi flash drivers.
On a hatch Chrome OS build this saves 9.5KiB of text in each of verstage,
romstage, and ramstage.
Change-Id: Ifb1b962cde3a6a02353ddf83279234057a9ec2fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add a new Kconfig option, SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS,
to make it easier for other parts of the code base to indicate that
all spi flash drivers should not be included.
Change-Id: Ibf2c4f1d2b8a73cff14bb627ddf759d7970920ea
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Rename array and use defines for the values.
The patch doesn't change the resulting binary when using BUILD_TIMELESS=1
Change-Id: I774373d231a0f4a2fe82ab7c6f1318fc56bcc678
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38405
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
LyCx(r, x, y) was a duplicate of the CxLy(r, x, y) with different order
of computation, so that the big refactoring doesn't change the output
binary of a timeless build. Now this workaround can be dropped.
Tested on lenovo/x230: still boots
Change-Id: I251b4dd383f954b27f392190092e06a9a06668e2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The current BIOS-extracted VBT breaks backlight control
with Tianocore, so replace it with one that does. Settings
were exported using Intel BMP tool and the overlayed onto
a GOP-format (vs BIOS format) VBT file.
Test: boot google/wolf with both SeaBIOS and Tianocore payloads,
verify backlight control functional under both Linux and Windows.
Change-Id: Id6281c8dfb6e0001be8c4d9be1013f2d4bbb5880
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
There are more instances of PCI_DEV(0, 0, 0), so use the macro for them.
Note that the resulting code with PCI_DEVFN(0, 0) is weird. It shall be
replaced with config_of_soc() in a follow-up.
Tested with BUILD_TIMELESS=1, resulting binary is identical.
Change-Id: Ia50965a108a734d192b584291a0796a2f2bc3a55
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38338
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating Kconfig to add Chrome OS support with
both internal and external EC
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ia63c06e3b4b4effcace7a8458b1066a615de2008
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38148
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is a initial mainboard code aimed to serve as base for
further mainboard check-ins.
This is a copy patch from icelake_rvp as on commit ID:
I64db2460115f5fb35ca197b83440f8ee47470761
Below are the changes done over the copy patch:
1. Rename "Icelake" with "Tigerlake".
2. Replace "icelake_rvp" with "tglrvp".
3. Rename "icl" with "tgl".
4. Remove unwanted SPD file, add empty SPD as
placeholder.
5. Replace "soc/intel/icelake" with "soc/intel/tigerlake".
6. Empty romstage_fsp_params.c, to fill it later with
SOC specific config.
7. Empty GPIO configuration, to be filled as per board.
8. Change copyright year to 2019.
9. Add board support namely BOARD_INTEL_TGLRVP_UP3
10. Replace icl_u and icl_y variant with tglrvp variant.
11. Remove basebord gpio.c and rely on variant override.
12. Remove HDA verb table and config support.
Changes to follow on top of this:
1. Add correct memory parameters, add SPDs.
2. Clean up devicetree as per tigerlake SOC.
3. Add GPIO support.
4. Update chromeos.fmd to make 32MB BIOS region.
5. clean up and make empty devicetree setting
TEST=Build tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I86ada611de1cf28a1b872eea35cf41c0dc1c57f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Drallion will use two sar table for tablet and clam shell mode.
BUG=b:140469407
TEST=Build and check the config has enable
BRANCH=none
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I0367741e795a3b00c490ecb1972d22b9f454134f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
These new definitions will be used by two other changes.
Change-Id: I242244c444f36af188c871dce037a7a9250206cd
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38367
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This avoids including platform-specific headers with different
filenames from common code.
Change-Id: Idf9893e55949d63f3ceca2249e618d0f81320321
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Both IO port and cmos are currently arch/x86 only features.
Change-Id: I010af3f645c0be38dd856657874c36103aebbdc2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38187
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ByteLane is used unitialized from prior for statement,
creating a potential out-of-bound read of RxOrig[MaxByteLanes].
PassTestRxEnDly[MaxByteLanes] never appears as rvalue; all for
loops have ByteLane < MaxByteLanes exit condition.
Change-Id: Icd18a146aba6b6120d37518d8c40c7efbc05afa3
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241804
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
New Kconfig for Jasperlake soc was created and fsp_param for Jasperlake
has differences compared to Tigerlake. Thus renaming fsp_params.c to
fsp_params_tgl.c to point out correct file as per soc selected.
Also adding new file for fsp_param_jsl for Jasperlake SoC and currently
its the copy of fsp_param_tgl.
TODO: update files with correct fsp_params
Change-Id: I12815ae28a1eb4c64afda0a85b5c14fc0da3e4b1
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37267
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All other messages in `ec/lenovo/h8` are prepended with *H8*, so also prepend
the EC version log message with *H8*.
EC Firmware ID 79HT50WW-3.4, Version 7.01A
No CMOS option 'usb_always_on'.
H8: BDC detection not implemented. Assuming BDC installed
H8: WWAN detection not implemented. Assuming WWAN installed
No CMOS option 'fn_ctrl_swap'.
Change-Id: Ib4f341946a336b57bd96c053a05364276caad1ac
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Some things fit in a single line now that we have a 96-char limit.
Tested, does not change the binary of Gigabyte GA-H61MA-D3V.
Change-Id: I3bef75291d1ecb2c9c3c74d9e78caf84a1f726aa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
ACPI spec:
"A device object must contain either an _HID object or an _ADR
object, but should not contain both."
Signed-off-by: Jonas Moehle <ad-min@mailbox.org>
Change-Id: I949393558f5af66689c167b2e593a1461f641962
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37935
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When this board was added, S3 resume was tested and working, so it must
be good enough.
Change-Id: Ie095868ea2de7846b995271baf8155e57b495e40
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
These values are the same that were hardcoded in autoport before. As
done in commit 08caa79 (util/autoport: Trim gfx.did to size), ensure
that the hardcoded values make at least some sense.
Change-Id: I9950fd10e45f5016611a5d5b6a9e41c2b0f25a5f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38086
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It has no reason to be disabled.
Change-Id: Iba82b6f71bc3d3a86576b719f2709595b530b702
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Bernardo Perez Priego