After assessing the signal integrity, 100 MHz SPI fast speed can be
enabled for SPI ROM.
BUG=None
TEST=Build and boot to OS in Nipperkin board version 2. Perform 250
iterations of warm and cold reset each.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Id973acb939b69e0beda26252e57a278892f2f57d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
CB:58374 (for mb/google/brya0) was merged before brya4es is
available (CB:59728). And since brya4es is forked from brya0, brya0's
change need to be brought into brya4es as well.
BUG=b:203014972
TEST=build
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I97489343b8f7a5b9457cd6f4a61cc37cd10ab450
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Hook up `Device4Enable` FSP setting to devicetree state and drop its
redundant devicetree setting `Device4Enable`.
The following mainboards enable the DPTF device in the devicetree
despite `Device4Enable` is not being set.
* google/deltaur
Thus, set it to off to keep the current state unchanged.
Change-Id: Ic7636fc4f63d4beab92e742a6882ac55af2565bc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
`SataEnable` is set by some boards, but it doesn't have any effect since
its related FSP option is hooked up to the devicetree state. Thus, drop
it.
Change-Id: Id645bfcade7ca1d495fb8df538113b3d10392a82
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Hook up `SmbusEnable` FSP setting to devicetree state and drop its
redundant devicetree setting `SmbusEnable`.
The following mainboards enable the SMBus device in the devicetree
despite `SmbusEnable` is not being set.
* google/deltaur
* starlabs/laptop
Thus, set it to off to keep the current state unchanged.
Change-Id: I0789af20beb147fc1a6a7d046cdcea15cb44ce4c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
1. Copy the default configuration from Puff.
2. Update the 'stop_gpio' to GPP_H22.
BUG=b:193750191
BRANCH=None
TEST=Update kernel for 8125 outbox driver and test with
command suspend_stress_test.
Change-Id: I2e82dbc1e6c68cbd84b603adc7fdc3ee1d4d3392
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The original change was for mb/google/redrix (commit 0167f5adbb),
"The ChromeOS kernel platform driver is adding support for a ChromeOS
privacy screen device, and in order to locate that device, the driver
uses the GOOG0010 reserved HID for this"
But it was merged before redrix4es is available. As redrix4es is forked
from redrix, relevant change in redrix need to be brought into
redrix4es as well.
BUG=b:206850071
TEST=build
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I5ac90c249273bf4e75cccb5889844a7f196f56fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
CONFIG_ONBOARD_SAMSUMG_MEM was used to force Samsung memory.
CPLD returns different values for every board revision. Use this value
to determine the memory type.
BUG = N/A
TEST = Boot Facebook FBG1701 Rev 1.0 - 1.4
Change-Id: I21b5ddc430410a1e8b3e9012d0c07d278880ff47
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The macro was defined using PCH_DEV_SLOT_CPU_1, which doesn't exist,
so replace it with the correct value of SA_DEV_SLOT_CPU_1.
Change-Id: If6d294d681907c51ac5678c9251364d4d6df4329
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Since 4ES variants were forked from their own original variants,
use the same TPM I2C as well.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Iddd6d8c22a181aba596b836f20392f76539b8549
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move the SMM Kconfig options to the specific agesa cpu families.
Select NO_SMM for family14 since since no Fam14h platform uses SMM.
Leave SMM_ASEG enabled for family15tn and family16kb for now.
TEST=Boot Debian 11 on PC Engines apu1
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I09bbe036a88dada847219606ec79c68e7ca8e5cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
All SPI interface setup related functionality that Stoneyridge
implemented in its southbridge code is already present in the common AMD
SoC code, so use that code instead.
The common fch_spi_early_init function requires the SPI controller's
base address to be set, so call lpc_set_spibase(SPI_BASE_ADDRESS) right
before it. fch_spi_early_init then calls lpc_enable_spi_rom and
lpc_enable_spi_prefetch which can be removed from the board code now.
Next it calls fch_spi_configure_4dw_burst which does the same as the now
removed sb_disable_4dw_burst function when
SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST is set to n which is the default.
This option can also only be set to y for SoCs that aren't Stoneyridge.
Finally fch_spi_early_init calls fch_spi_config_modes which configures
the SPI mode and speed settings according to the Kconfig settings and
the settings in the amdfw part. On Kahlee this was done by calls to
sb_read_mode and sb_set_spi100 before. The previous patch added the
remaining Kconfig settings, so the resulting register values don't
change in the non-EM100 case. In the EM100 case the TPM speed is changed
from 64 to 16 MHz.
TEST=Both the non-EM100 mode with a real SPI flash and the EM100 mode
with a first-generation EM100 results in Google/Barla reaching the
payload and the show_spi_speeds_and_modes call in bootblock prints the
expected settings:
relevant bootblock console output in non-EM100 case:
SPI normal read speed: 33.33 MHz
SPI fast read speed: 66.66 Mhz
SPI alt read speed: 66.66 Mhz
SPI TPM read speed: 66.66 Mhz
SPI100: Enabled
SPI Read Mode: Dual IO (1-2-2)
relevant bootblock console output in EM100 case:
SPI normal read speed: 16.66 MHz
SPI fast read speed: 16.66 MHz
SPI alt read speed: 16.66 MHz
SPI TPM read speed: 16.66 MHz
SPI100: Enabled
SPI Read Mode: Normal Read (up to 33M)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f37a3b040808d6a5a8e07d39b6d4a1e1981355c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Before this patch only the SPI settings that will also end up in the
amdfw part of the firmware were specified in the board's Kconfig. This
patch adds the settings from Kahlee's bootblock.c to the Kconfig file
which will be needed in subsequent patches. Also add a comment about the
EM100 case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie42feb9b41f435c329bf1c78471e65ef5a3fb783
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The PSP EFS code to get the SPI mode and speed from the amdfw part of
the firmware image also works for Stoneyridge which is the one SoC that
selects SOC_AMD_COMMON_BLOCK_PSP_GEN1. Also amdblocks/psp_efs.h already
handles the SOC_AMD_STONEYRIDGE case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibddd3f9237e561d9f0f6b4ad70f59cce1f956986
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The reference design has changed to use GPIO SET1 for NOR flash.
There are no devices already built using SET0 so we can safely
change the implementation without conditional configs.
Reference document:
kingler_mt8186_mt6366_lpddr4x_e.pdf, page 11.
crab_proto 0_2021112.pdf, page 11.
BUG=b:202871018
TEST=flash verify pass on kingler on bootblock stage
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I031686ccddcf789f3fa966d113ee48949e454b8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Retrieve the SKU ID for Corsola via CBI interface.
If that failed (or no data found), fallback to ADC channels for SKU ID.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I2888190d498df28b5ae13cf92cc41d088e8f8ee7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Fixed according to the declaration in
soc/intel/common/block/include/intelblocks/cfg.h.
Change-Id: I50dbc00806fefda8f4dac8bfa21dc714a9504566
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Combine guybrush mem_parts_used.txt across guybrush variants. Guybrush
reference memory parts is used as the base, then Nipperkin memory
parts were appended, followed by DeWatt memory parts. Duplicates were
removed.
The memory id mapping was not affected on guybrush reference and
Nipperkin. DeWatt memory id mapping was affected, DeWatt boards will
need to be adjusted.
This works around a limitation in APCB, which currently only supports
one set of memory SPDs.
BUG=b:209486790, b:204151079
BRANCH=None
TEST=Boot guybrush and nipperkin
Change-Id: Ie17025e092f2b9397afea33fce285e80ef5dc995
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
According to https://uefi.org/specs/ACPI/6.4/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html#pm1-event-grouping
> For ACPI/legacy systems, when transitioning from the legacy to the G0
> working state this register is cleared by platform firmware prior to
> setting the SCI_EN bit (and thus passing control to OSPM). For ACPI
> only platforms (where SCI_EN is always set), when transitioning from
> either the mechanical off (G3) or soft-off state to the G0 working
> state this register is cleared prior to entering the G0 working state.
This means we don't want to clear the PM1 register on resume. By
clearing it the linux kernel can't correctly increment the wake count
when the power button is pressed. The AMD platforms implement the _SWS
ACPI methods, but the linux kernel doesn't actually use these methods.
BUG=b:172021431
TEST=suspend zork and push power button and verify power button
wake_count increments. Verified other wake sources still work.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaa886540d90f4751d14837c1485ef50ceca48561
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Stoneyridge selects ARCH_X86 unconditionally and all coreboot code will
run on the x86 cores. On Picasso and later, the Chromebooks run verstage
on the PSP which is an ARM V7 core which needs some special handling
cases in the code, but this doesn't apply to Stoneyridge.
TEST=Timeless build results in an identical image for Google/Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I013efd13b56c0191af034a8c4b58e9b26a31c6e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
According to https://uefi.org/specs/ACPI/6.4/16_Waking_and_Sleeping/sleeping-states.html?highlight=power%20states#
> For ACPI/legacy systems, when transitioning from the legacy to the G0
> working state this register is cleared by platform firmware prior to
> setting the SCI_EN bit.
This change makes sure we clear the PM/GPE blocks are cleared before
enabling the SCI_EN bit.
BUG=b:172021431
TEST=Boot guybrush and morphius to OS and verify suspend resume still
works.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Icc6f542185dc520f8d181423961b74481c0b5506
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In ec/google/chromeec: Add PLD to EC conn in ACPI table(667471b8d8), PLD is added to ACPI table. It causes the DUT to not boot into the OS. So fix the USB3/USB2 Type-C Port C2 PLD group order from 3 to 2 to solve this issue.
BUG=b:209568644
BRANCH=none
TEST=build coreboot and system boot into OS.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: If5ce6ca061d9d56ba0bbb1f157b2ba278d3fa9c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59953
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities. Haven't checked the reference
code, but the register descriptions suggested that the register in
Mullins behaves similar to the one in Stoneyridge. Right now this code
is unused, but it's probably still a good idea to fix it.
TEST=Booting Debian 11 with kernel 5.10 on apu2 still works when adding
a call to hudson_set_spi100 with this patch applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifbd960a9509542b28f03326a3066995540260bef
Tested-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for Stoneyrige also only sets the SPI_USE_SPI100 bit and
doesn't zero out the other bits.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d32fc2084bb34ea57924bae68511c6836587790
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for both Picasso and Cezanne also only sets the
SPI_USE_SPI100 bit and doesn't zero out the other bits.
TEST=Verified that Mandolin still boots. It didn't show any signs of
possibly related instabilities before though, so this test doesn't say
much.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71c2ec1729d5cb4cdff6444b637af29caaa6f1c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
commit 90ac882a32 (soc/amd/common/block/
spi: introduce SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST) introduced a Kconfig
option to enable/disable the 4DW burst support in the SPI flash data
prefetcher, but missed to update the documentation above the
fch_spi_early_init prototype, so update the outdated documentation now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I07c4b0b02251da63d34a172e2636894e99845d6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Disable SMM_ASEG and select NO_SMM since the platforms do not use SMM.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I47237421c3dd5bd043447831263d72c9956cdaf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Current log2_ceil(x) is defined as log2(x * 2 - 1). When x is larger
than (1 << 31), (x * 2 - 1) won't fit in u32, leading to incorrect
result. Therefore, correct it as (log2(x - 1) + 1). Also add unit tests
for inline functions in lib.h.
BUG=none
TEST=make tests/lib/lib-test
BRANCH=none
Change-Id: If868f793b909a6ad7fc48a7affac15e2c714fa2e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
These functions can't be weak, because they actually need to configure
the GPIOs for eSPI and the TPM. With this change zork boots again.
I also noticed that zork doesn't use the early table in bootblock. This
means that zork will only boot if psp_verstage is enabled.
BUG=b:209465425
TEST=boot zork to ramstage
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I384fd578efe7da0a3d74829cccf38c3ed524f130
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Use KiB and MiB instead of multiplying/dividing with/by the numeric
value when doing region size calculations.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I56c380190b11aa3214cce31b82974327e3d15000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Remove global variables `sblink` and `node_nums` and add function
`get_node_nums()` which reads from PCI config once and returns a static
variable.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I20a47f967093ef91355377c164656cabadc30fe6
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add a list of gpios to lock for brya. This currently includes
GPIOs connected to the FPMCU.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: Idea42a58575c280be0770d38f934acdf5508c45d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change supplies a list of ADL gpios that are connected to non-host
(x86) controllers and should be locked after initial configuration.
Set SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS to enable GPIO locking.
BUG=b:210430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: I457bab39f945ab31a89542c6498a73af70cbf9ee
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
For added security, there are some gpios that an SoC will want to lock
once initially configured, such as gpios attached to non-host (x86)
controllers, so that they can't be recofigured at a later point in
time by rogue code.
Likewise, a mainboard may have some gpios connected to secure busses
and/or devices that they want to protect from being changed post
initial configuration.
This change adds a generic gpio locking mechanism that allows the SoC
to export a list of GPIOs to be locked down and allows the mainboard
to export a list of GPIOs that it wants locked down once
initialization is complete.
Use the SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS Kconfig option to
enable this feature.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify
brya0 boots successfully to kernel.
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Change-Id: I42979fb89567d8bcd9392da4fb8c4113ef427b14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
We only have ADL-P 6+8+2 (45W) VR configuration now. Based on the
power map, fill in correct ADL-P 6+8+2 (28W) VR configuration.
BUG=b:202486131
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ie8dbd95b2d8e49b5898b2a97aff72e0e64868c8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add Alder Lake-N case for adl_cpu_type and get_supported_lpm_mask.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: If2917ac356fd80f84bcaf70ed710d329e77f7a6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Disable LEGACY_SMP_INIT to enable PARALLEL_MP.
Also remove a large amount of APIC code that is now unnecessary.
TEST=Boot on PC Engines apu3
Boot time reduced from 1.707 seconds to 1.620 seconds average across
5 coldboots.
Inspired by CB:59693
Change-Id: Ib49e7d3f5956ac7831664d50db5f233b70aa54db
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
With CPU_INFO_V2 enabled %gs holds the pointer to the cpu_info struct,
so don't clobber it. Backup and restore %gs where possible.
Fixes a crash in MPinit seen after calling FSP-S.
Change-Id: If9fc999b34530de5d8b6ad27b9af25fc552e9420
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch removes all remaining pieces of the old CBFS API, now that
the last straggling use cases of it have been ported to the new one
(meaning cbfs_map()/cbfs_load()/etc... see CB:39304 and CB:38421).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1cec0ca2d9d311626a087318d1d78163243bfc3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The patch refectors cpu_set_p_state_to_max_non_turbo_ratio(). The
function is updated to use cpu_get_max_non_turbo_ratio().
TEST=Build the code for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If73df17faaf7b870ae311460a868d52352683c0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The patch defines below APIs :
cpu_is_hybrid_supported() : Check whether CPU is hybrid CPU or not.
cpu_get_bus_frequency() : Get CPU's bus frequency in MHz
cpu_get_max_non_turbo_ratio() : Get CPU's max non-turbo ratio
cpu_get_cpu_type() : Get CPU type. The function must be called if
executing CPU is hybrid.
TEST=Verified the APIs on the Brya board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I680f43952ab4abce6e342206688ad32814970a91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds the setting of PsysPmax to 143 W according to
gimble board design.
BUG=b:206990759
TEST=emerge-brya coreboot chromeos-bootimage & ensure the value is
passed to FSP by enabling FSP log & Boot into the OS
Change-Id: Id6a203f05ecfcc1020a422850d35fa3fa64e01d0
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ryan Lin <ryan.lin@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This enum is useful to have around for more than just the one file, so
move it to a common header file, and while we're there, also add an
option for UNKNOWN.
TEST=boot test on brya0
Change-Id: I9ccf0ed9504dbf6c60e521a45ea4b916d3dcbeda
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Some acpigen code may use mutexes, and it is a common idiom to pass
a value for the Timeout field of 0xffff, which is interpreted by OSPM
to mean "no timeout". Therefore add a macro for this value.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I16bc9f3f04dd1e3dc0f3eca3e56377e6f48132b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Eject event is high. Set wake event to active high. The polarity of the SCI and the wakeup_event_action for the pen ejection feature were both
backwards, and was causing the system to fail to enter sleep states
because the event was always asserted.
BUG=b:208937710
TEST=only release switch can wake system.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I568e9175c7a66599f7a525c32e4def7a79b55a0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Fixes commit 29c7622 ("cpu/x86/mp_init.c: Fix building with no
smihandler") broke SMM init because is_smm_enable() was called before
smm_enable.
Rework the code a little to make it clear what codepaths are used with
CONFIG_HAVE_SMI_HANDLER.
TESTED: now prodrive/hermes boots again.
Change-Id: If4ce0dca2f29754d131dacf2da63e946be9a7b6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59912
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The stryke project/mainboard never ended up being built and was
cancelled early on, therefore remove it from the tree.
Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Check the Alderlake CPU ID to determine if cse sub-paritition update is
required or not.
BUG=b:202143532
Change-Id: Icae21dad56ed4a1edea1f641b3d5bccc3943f831
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds the following support to coreboot
1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B
partition of BIOS
2. Helper functions to support update.
Pre-requisites to enable IOM/NPHY FW Update:
1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and
FW_MAIN_B through board configuration files.
CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path
SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path
2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition
NPHY/IOM update.
coreboot follows below procedure to update NPHY and IOM:
NPHY Update:
1. coreboot will navigate through the CSE region,
identify the CSE’s NPHY FW version and BIOS NPHY version.
2. Compare both versions, if there is a difference, CSE will trigger an
NPHY FW update. Otherwise, skips the NPHY FW update.
IOM Update:
1. coreboot will navigate through the CSE region, identify CSE's IOM
FW version and BIOS IOM version.
2. Compares both versions, if there is a difference, coreboot will
trigger an IOM FW update.Otherwise, skip IOM FW update.
Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT
PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE
boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only
if CSE boots from CSE RO Boot partition.
Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then
triggers update of NPHY and IOM FW in the CSE Region(RO and RW).
coreboot triggers NPHY/IOM update procedure in all ChromeOS boot
modes(Normal and Recovery).
BUG=b:202143532
BRANCH=None
TEST=Build and verify CSE sub-partitions IOM and NPHY are getting
updated with CBFS IOM and NPHY blobs.
Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after
the update.
Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds a check to determine if the CSE's current operation mode
is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE
command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG,
coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW
partition.
TEST=Verify sending HMRFPO_ENABLE command on Brya system.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The patch renames the compare_cse_version() function to the
cse_compare_sub_part_version(). It makes the function generic so that
it can be used to compare version of any CSE sub-partition like IOM,
NPHY etc.
TEST=Verified build for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to
specify the correct amount of PCIe I/O.
Document number 645550 indicates that Alder Lake-N has 12 PCH root ports
and no CPU root ports.
Document number 645548 indicates ADL-N has 5 clock sources and 5 clock
request signals.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch moves the CBFS file measurement when CONFIG_TPM_MEASURED_BOOT
is enabled from the lookup step into the code where a file is actually
loaded or mapped from flash. This has the advantage that CBFS routines
which just look up a file to inspect its metadata (e.g. cbfs_get_size())
do not cause the file to be measured twice. It also removes the existing
inefficiency that files are loaded twice when measurement is enabled
(once to measure and then again when they are used). When CBFS
verification is enabled and uses the same hash algorithm as the TPM, we
are even able to only hash the file a single time and use the result for
both purposes.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I70d7066c6768195077f083c7ffdfa30d9182b2b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add WiFi SAR table for felwinter.
BUG=b:206901900
TEST=emerge-brya chromeos-config chromeos-config-bsp-private
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
and checked SAR table can load by WiFi driver.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I0de710f4447302ee545a67cbd79373bdd2077637
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.
BUG=b:203014972
Test= Boot board and issue commands:
`cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom >
./brya_imx208_eeprom.bin`
`hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
You should see the result in brya_imx208_eeprom_dump.log to be
same as module nvm file by vendor provided or meet the Intel nvm
calibration format.
(e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Samsung K4U6E3S4AA-MGCL
BUG=b:204014463
TEST=run part_id_gen to generate SPD id
Change-Id: Icb0f211508450b16b2e5d214ae6adc9852718a59
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The 'at' part of the name refers to starting to read from a specific
offset, so it doesn't make sense for the 'full' version of the function.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I60d595f0cbd161df171eaa4a76c7a00b6377e2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59820
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The build fails because smm_stub_size() tries to find a symbol that
won't be present.
Change-Id: I73fee3cf26c0e37cca03299c6730f7b4f1ef6685
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The Hermes mainboard is used in different system configurations. The
current VBT for Poseidon systems is unsuitable for Avalanche systems
because display ports are connected differently.
Add a new field in the BMC config EEPROM layout and use it to choose
the correct VBT for every system configuration.
Change-Id: I2647f2ae3f496b9ad75980ba86beb7800fdb0668
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The original RCOMP resistor and target values only apply to ULT CPUs and
do not make sense for the CFL-S CPUs Hermes uses. Fix the RCOMP settings
and the associated comments.
Tested, still boots.
Change-Id: I015797c58c914c6581d472e6d70d2dd7bad2b14f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Define a new field in the board config EEPROM layout for port B Vref.
Write port B Vref settings to unused non-volatile NID 0x12 instead of
NID 0x18, the actual port B NID. Because per-port Vref settings don't
persist after codec resets, a custom Realtek driver (ab)uses NID 0x12
to restore port B Vref after resetting the codec.
Change-Id: Iaa11ba9c74f643e94046d4983fbce65dbedd1025
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use lowercase for hex numbers, sort includes alphabetically and avoid
relying on indirect inclusion. Include `<intelblocks/gpio.h>` instead
of `<intelblocks/gpio_defs.h>`, as the latter implcitly relies on one
definition from `<soc/gpio.h>`. Also drop useless dsdt.asl and fix up
the indentation of some includes.
Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical.
Change-Id: I3aeb9a644cf33cb4b1987174f40ef0fc7daccfa9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
There's no need to use a variant structure here. Only one variant is
used, and revision-specific differences are handled at run-time, and
it's unlikely that another variant will ever exist.
Reorganize the mainboard code to get rid of the variant structure.
Change-Id: I1543f5b76975b0e7183fbb759e9bae5c34151d06
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
EN_SPKR GPIO is used as a multiplexer select signal between RAM_ID
straps and Developer Mode Beep signals. During boot up it is LOW and
selects RAM_ID straps. When the system enters OS, it is driven HIGH and
selects DEV BEEP signals. Since in some boards, the GPIO chosen is in S5
domain it does not reset until the system enters mechanical off (G3)
state. On scenarios where the power button is pressed when the system is
in S5, incorrect RAM_ID strap is being read because the EN_SPKR is still
selecting DEV BEEP signal. This causes boot up failures. Fix this by
configuring the EN_SPKR GPIO (in S5 domain) explicitly in PSP verstage.
BUG=b:204450368
TEST=Build and boot to OS in Guybrush. Perform suspend-resume cycle
followed by a S5 -> S0 boot cycle for 2 iterations successfully.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I9a52a167da9c7040731da5d355ec345fd9b13762
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59813
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Turn on the LAN device in devicetree and add Kconfig item
RT8168_GET_MAC_FROM_VPD to support programming MAC address.
BUG=b:193750191
BRANCH=None
TEST=Use 'vpd -s ethernet_mac0=...' to write MAC to VPD.
Use 'ifconfig' to check if the MAC written successfully.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: Ibb95b02fd6d61621ef46db4d63b48456a0a72732
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The Realtek RT8168 and RT8125 have a similar programming interface,
therefore add the PCI device ID for the RT8125 into driver for support.
BUG=b:193750191
TEST=emerge-brask coreboot chromeos-bootimage. Test on brask whose NIC
is RT8125. Check if the default MAC is written into the NIC.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: Iaa4c41f94fd6e5fd6393abbb30bfc22a149f5d71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207625007
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Change-Id: I20cdd1650d1ca774065a6c051006dfd0b7a3fd79
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The VR configuration should be based on the different Soc SKU type. And
we also have different SKU in the same SA PCI ID.
Therefore, add TDP to recognize the correct SKU and give the correct
power setting.
BUG=b:202486131
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: I4d31e7afc76d9a8c772781671f92ec08f9d8713f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Create the beadrix variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:204882915
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_BEADRIX
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ie08cbc19967eca8ba31ea3203e71c4e1fef044d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Guybrush uses secure counters to protect against High Definition (HD)
protected content rollback. These secure counters are hosted in TPM
NVRAM. Enable secure counters so that they are defined in PSP verstage.
BUG=b:205261728
TEST=Build and boot to OS in Guybrush. Ensure that the secure counters
are defined successfully in TPM NVRAM.
Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
High Definition (HD) protected content playback requires secure counters
that are updated at regular interval while the protected content is
playing. To support similar use-cases, define space for secure counters
in TPM NVRAM and initialize them. These counters are defined once during
the factory initialization stage. Also add
VBOOT_DEFINE_WIDEVINE_COUNTERS config item to enable these secure
counters only on the mainboard where they are required/used.
BUG=b:205261728
TEST=Build and boot to OS in guybrush. Ensure that the secure counters
are defined successfully in TPM NVRAM space.
tlcl_define_space: response is 0
tlcl_define_space: response is 0
tlcl_define_space: response is 0
tlcl_define_space: response is 0
On reboot if forced to redefine the space, it is identified as already
defined.
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
Change-Id: I915fbdada60e242d911b748ad5dc28028de9b657
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In next build phase, primus will exchange i2c port for touchscreen and cr50.
BUG=b:207834727
TEST=build pass
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: Ief1b156b866a9aaa2919f0e209b6439c7019e939
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207070967
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ice522260f288b165ae66dddc3e1979e806b53f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Create the taniks variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:207402720
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TANIKS
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I797051f93019ccf72f1007d9c0b98cfb071717b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
1. Set the PL1, PL2 and PL4 according to issue b:193864533 comment#55
and Intel's doc #626774.
2. Set PsysPL2 and PsysPmax according to the conclusion in issue
b:193864533 comment#23 and comment#29.
BUG=b:193864533
BRANCH=none
TEST=Compare the measured power from adapter with the value of 'psys'
from the command 'dump_intel_rapl_consumption'.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I9261902b8c892d0b866f326b24988039c1d30b56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Copy function variant_update_power_limits from brya to set power limits.
Add function variant_update_psys_power_limits and copy the algorithm
from puff. Add structure system_power_limits and psys_config to define
and configure the psys power limits.
BUG=b:193864533
BRANCH=none
TEST=Build pass
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I183017068e9c78acb9fa7073c53593d304ba9248
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
DVT schematic will exchange TPM_I2C3 to TPM_I2C1, that may need swap
TPM I2C with touchscreen I2C to avoid TPM I2C fall on muxed ISH I2C,
need change I2C map, sch amd GPIO map. b/196293623
BUG=b:207613972
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I26d059a7ea5a3fdf00de260214c00d3bba9aa7f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59580
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since we may have either BIOS ACM or both BIOS and SINIT ACMs in CBFS,
the size of txt_heap_acm_element will be different. We cannot always
hardcode the size of ACM addresses array for two ACMs. If only the BIOS
ACM was included, the BDR parsing failed in TBoot due to invalid size
of HEAP_ACM element. Check if SINIT ACM is present in CBFS and push
properly formatted BDR region onto the TXT heap. Use two separate
txt_heap_acm_element structures with different lengths.
TEST=Boot QubesOS 4.0 with TBoot 1.8.2 on Dell OptiPlex 9010 with and
without SINIT ACM in CBFS and see that TBoot no longer complains on
the wrong size of HEAP_ACM element
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib0c37a66d96e1ca3fb4d3f665e3ad35c6f1c5c1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Initialize the DPR register and check if SCLEAN needs to be run.
Allows to reliably boot the platform if ungraceful shutdown occured or
the memory controller has been locked by TXT.
TEST=Dell OptiPlex 9010 with Intel TXT enabled boots successfully
after 4s power button override or power cable unplug when SENTER was
executed. Successfully boot QubesOS 4.0 with TBoot v1.8.2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I4b912f121593fa55c11813262f09be1a1055e950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Keeping the PM timer enabled will disqualify an ADL system from entering
S0i3, and will also cause an increase in power during suspend states.
The PM timer is not required for brya boards, therefore disabling it.
Fixes: 0e905801 (soc/intel: transition full control over PM Timer from
FSP to coreboot)
BUG=b:206922066
TEST=Boot gimble to OS and verify S0i3 counter incrementing after
exiting S0ix suspend states.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I8005dacd732c033980ccc479375ff5b06df8dac1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59790
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Alder Lake code currently supports the PCH-M and PCH-P types, which
have some differences (so far, only the amount of PCIe I/O). Mainboards
can use the `SOC_INTEL_ALDERLAKE_PCH_M` Kconfig option to specify which
PCH type they use: select the option to choose PCH-M, do not select the
option to choose PCH-P. While this works, it can be confusing once more
PCH types are added.
Introduce the `SOC_INTEL_ALDERLAKE_PCH_P` Kconfig option so that boards
have to explicitly choose a PCH type. Also, use this option to restrict
the PCH-P defaults for PCH-dependent settings to avoid unintended reuse
of the PCH-P defaults when adding a new PCH type. To make sure only one
PCH type is selected, add some preprocessor in `bootblock.h` to provoke
a build-time error if this requirement is not met. Kconfig doesn't seem
to have a mechanism to describe sets of mutually-exclusive bool options
that allows said options to be selected (a `choice` block doesn't allow
its elements to be selected). Finally, adapt the ADL boards accordingly.
Change-Id: I7deca820e08ce2b5a220f3c97a511a4f3464a976
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
The current implementations of edid_read() and segments_edid_read() have
a few problems:
1. The type of variable `c` is incorrect, not matching the return type
of sp_tx_aux_rd(). In addition, the meaning of `c` is unknown.
2. It is pointless to do `cnt++` when sp_tx_aux_rd() fails.
3. These two functions ignore the return value of
anx7625_reg_block_read().
4. In segments_edid_read(), anx7625_reg_write() might return a positive
value on failure.
Fix all of the 4 issues, and modify the code to be closer to kernel
5.10's implementation (drivers/gpu/drm/bridge/analogix/anx7625.c). Note
that, however, unlike in kernel, anx7625_reg_block_read() here doesn't
return the number of bytes. On success, 0 is returned instead.
In addition, following coreboot's convention, always return negative
error codes. In particular, change the return value to -1 for
edid_read() and segments_edid_read() on failure.
BUG=b:207055969
TEST=emerge-asurada coreboot
BRANCH=none
Change-Id: Ife9d7d97df2926b4581ba519a152c9efed8cd969
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This area is used for storing AP RO verification information.
BRANCH=none
BUG=b:141191727
TEST=built a guybrush firmware image and verified that the RO_GSCVD
area was indeed added:
$ dump_fmap /build/guybrush/firmware/image-guybrush.bin | \
grep -B3 RO_GSCVD
area: 25
area_offset: 0x00808000
area_size: 0x00002000 (8192)
area_name: RO_GSCVD
$
- verified that guybrush device boots fine with the new image.
Change-Id: Ifa24d5a6271a8bcbf737d4580ec85b9cfdd9af01
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57864
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ChromeOS kernel platform driver is adding support for a ChromeOS
privacy screen device, and in order to locate that device, the driver
uses the GOOG0010 reserved HID for this.
Patch for 5.10 kernel can be found at:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3289984
BUG=b:206850071
TEST=dump SSDT, see _HID instead of _ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If988ca94b6c70d08a7b07cc9f6bbb077fac84e5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59731
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some boards may want to use a _HID instead of an _ADR to locate a
graphics device. This patch provides that option in the devicetree.
BUG=b:206850071
TEST=Add `hid` entry in devicetree, dump SSDT and see _HID instead of
_ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I32be4abf5c60be1f94aabaa2e9c734215c4e291e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested on Qemu/i440fx. The follow-up commit adds a config file to
buildtest it.
Change-Id: Ieeaa85691e4c4516bb51df0e87c4ecaa940810f0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Fix the issue that power consumption of single rank DRAM is greater
than dual rank DRAM due to incorrect settings of rank1 CKE.
Set rank1 CKE to the correct state to fix this issue.
BUG=b:196867407
TEST=DUT can boot to OS.
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: If336197aea4770dda1332b6e83da8ec9a4f9d77b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch drops unnecessary `pmc_ipc.c` from Makefile as this
file is getting included upon CONFIG_PMC_IPC_ACPI_INTERFACE selection.
Change-Id: Ie66f0833daf033ec16210221610508f9fbb1e6c7
Signed-off-by: Subrata Banik <subi.banik@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some herobrine variants have USB hub powered by discrete LDO that is
controlled by USB_HUB_LDO_EN gpio. Assert the GPIO on boot.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ia94e046f9eb0d3ce593f3445e0203a7391c14de2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
These values make more sense as an enum, and are currently unused in
ASL files, therefore they can be moved to the appropriate part of the
header file and converted there.
Change-Id: I8b8586b46823b5da3614a0b2a2f2f16802e96962
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Despite Stoneyridge being one only SoC in soc/amd that uses the first
generation of the PSP mailblox interface, this code is common for all
SoCs that use the first PSP mailbox interface generation, so move it to
the common PSP generation 1 code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I78126cb710a6ee674b58b35c8294685a5965ecd6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59701
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BlueTooth disappeared after disabled USB2 port 9,
so we need to re-enable it.
BUG=none
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I7971509d7428562c80e781339ead059a189cea13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Libpayload requires cbmem_id.h file to support extracting values from
CBMEM IMD entries of coreboot tables. Libpayload use BSD-3-Clause
license, and all of its files used to compile a static library have to
use it too.
Change-Id: I97c080e34ebdbcdf14fe3a3c9515b1dea8ede179
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Fork multiple "4ES" variants off some brya devices to
properly support ES SoC.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ic9516fec591429238bde1478eca2522d8ed10127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
New PI 1.0.0.5 has more data in HOB of DMI, which has been uploaded to
google internal repo. The dismatched size of HOB causes the wrong data
tranfer. So the coreboot also need to change.
BUG=b:204732649
Change-Id: Id95c37a0d7027d75afddf9d7528ff41ae3a347f5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This part was copied from Picasso but Cezanne has some more bits used so
add the definitions now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icd128dca1ec30e7c70501c0e64482159be71cc7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Both SPI_ROM_BIOS_SEMAPHORE and SPI_ROM_EC_SEMAPHORE bits in the
LPC_PCI_CONTROL are defined in the Stoneyridge BKDG #55072 Rev 3.04,
Raven1 and Picasso PPR #55570 Rev 3.18, Raven2 PPR #55772 Rev 3.08 and
Cezanne PPR #56569 Rev 3.03 which are all platforms that use this code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I855e640d020daf21c9f5b2f62a2ad0fd0274a575
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This patch replaces the use of the deprecated
cbfs_locate_file_in_region() API with the new
cbfs_unverified_area_map().
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If4855280d6d06cf1aa646fded916fd830b287b30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds a new ..._unverified_area_... group of functions to the
cbfs_map/_load/_alloc() APIs. These functions can be used to access
custom FMAP sections and are meant to replace the existing
cbfs_locate_file_in_region(). The name is intended to highlight that
accesses through this API will not be verified when CBFS_VERIFICATION is
enabled and should always be treated as if they may return malicious
data. (Due to laziness I'm not adding the combination of this API with
the ..._type_... variant at this point, since it seems very unlikely
that we'll ever have a use case for that. If we ever do, it should be
easy to add later.)
(Also remove the 'inline' from cbfs_file_hash_mismatch(). I'm not sure
why I put it there in the first place, probably a bad copy&paste.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I402265900f7075aa0c2f58d812c67ea63ddf2900
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Adding USB addressmap for sc7280.
Use common USB driver for sc7280.
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ib92b74c8035a8c0148a9aa48e7870b261b832a33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add common USB driver for qualcomm soc sc7180 and sc7280.
This includes dwc3 controller, qmp ss phy, qusb hs phy and snsp hs phy.
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7180 and
sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: I1013ded22855286220cfa747cb25418070fe85a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
When using 32 bit PCI accesses in lpc_enable_port80, we can use the
LPC_IO_OR_MEM_DECODE_ENABLE and DECODE_IO_PORT_ENABLE4 defines and don't
need to re-define bits with offsets from the beginning of the third byte
within this 32 bit register. This allows to drop the
LPC_IO_OR_MEM_DEC_EN_HIGH register definition which points to
LPC_IO_OR_MEM_DECODE_ENABLE + 2 and to drop the re-definitions of the
bit re-definitions with a different offset.
The code in lpc_enable_port80 was originally copied from sb/amd/agesa/
hudson/early_setup.c which might be sort-of a copy from what the AGESA
reference code does.
TEST=When commenting out SOC_AMD_COMMON_BLOCK_USE_ESPI in the Kconfig of
Mandolin and selecting AMD_LPC_DEBUG_CARD, all POST codes still get
shown on the POST code LED display when this patch is applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I001bb1c2ccf99e36d4fbd73d3bf96b78ddb87d67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This function is unused and none of the SoCs using this code has a
physical PCI interface any more, so drop this function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia5c5a8ec29264a075fefe75038ef2a84684d6427
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
PSP_MAILBOX_BAR is defined as PCI_BASE_ADDRESS_4, so use it instead of
PCI_BASE_ADDRESS_4 in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8658b674b9adea85dfc71d7036ccf3ae17464b58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
PSPV2_STATUS_ERROR and PSPV2_STATUS_RECOVERY aren't used and the bit
definitions are also wrong, so drop those defines. For the PSP mailbox
interface version 2, struct pspv2_mbox is used to access the correct
status bits.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e2aadfde00e2f7b0f99b462b8e3d6954959a584
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
There are no quad-core CPU models with fam14, \_SB.C002 and .C003 get
removed from ASL.
Change-Id: I96df5b3f93c2dd6a05d5693069b991ca01f71d73
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The checking register will be cleared after EC resets, so we move
bustracker dump from ramstage to bootblock, before triggering EC reset.
TEST=bustracker shows status before watchdog resets
BUG=b:207743045
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic18dc9742cd9f657a035a374e28371dfc5f04ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There will be no log in cbmem if we trigger ec reset on bootblock
stage. Therefore, call dcache_clean_all() before triggering ec
reset to flush cache to store logs on cbmem.
BUG=b:207743045
TEST=show logs on cbmem
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I1bd900beb4cc84f7121c5fb66907fa73b62517fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The patch enables cse_fw_sync() before DRAM initialization.
cse_fw_sync() sends HECI commands in order to set CSE's boot partition
and to trigger CSE firmware update.
As part of CSE firmware update, coreboot sends HMRPFO_ENABLE HECI
command. Since CSE supports the command after DRAM Initialization,
cse_fw_sync() is called after DRAM initialization.
Starting from CSE Litev16.0.15.1545, CSE support HMRFPO_ENABLE command
before DRAM initialization too. So, cse_fw_sync() is called before DRAM
initialization.
BUG=b:175516533
TEST=Dependency with CSE Litev16.0.15.1545 integration
Change-Id: Iad7403650df8bc4e40aa6e48ccfeba95a5789a2d
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55364
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage
the same logic (to skip 2nd SIPI and reduce delay between
INIT and SIPI while perform AP initialization) even on
newer Intel platform.
Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename pcicfg to pci_map_bus and add prototype for the platforms not
supporting ECAM.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Id9517c5ec4fa6b7c7a34552bfdc6d509927f6730
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Only scan one device if it's a PCIe downstream port.
A PCIe downstream port normally leads to a link with only device 0 on
it. As an optimization, scan only for device 0 in that case.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Id184d03b33e1742b18efb3f11aa9b2f81fa03806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There was a duplicate PCI 0:14.4 device in ASL. Only
keep one.
There are no PCI devices 0:2.0 or 0:3.0 on fam14 northbridge
for graphics. There are no PCIe root ports 0:9.0 or 0:a.0.
Change-Id: Ifa8abb851f8ae4863b2c6d52224d287fd272048d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The section is the same and at root scope.
Change-Id: I3b3ff2fddc7d4db09903151bcb92e3e1b5dc7d69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The SMMSTORE_IN_CBFS option was just meant as a workaround for an
attempt to backport SMMSTORE into older Chromebooks that never actually
happened. All current and future users of coreboot should be using
SMMSTORE in an FMAP region. The APIs needed for SMMSTORE_IN_CBFS clash
with the CBFS rdev isolation needed for CBFS_VERIFICATION, so let's just
get rid of it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia0604a4ffd20b46774631d585925311b65d5a0e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59680
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Dumped using inteltool from the Dell BIOS version A30.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ifdc41a1e6627b68813fb264aed7e30df58fc6d54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59525
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable PS/2 data and clock isolation in order to properly initialize
the PS/2 keyboard and mouse in payload/OS. These bits are set by OS via
ACPI and can survive S5 state. It is necessary to clear them after an
ungraceful shutdown in order to perform PS/2 controller initialization
e.g. in SeaBIOS.
TEST=PS/2 keyboard can always be successfully initialized in SeaBIOS
on Dell OptiPlex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iac6be095c996b357b5d4e8d75199f94a89bf73e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59673
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable PMEs and clear global PME status to avoid undesired wakeups
or hangs in later stages. These bits are set by OS via ACPI can survive
S5 state so it is necessary to set them back to defaults after an
ungraceful shutdown.
TEST=Dell OptiPlex 9010 does not hang anymore after ungraceful shutdown
when configuring GPE0_EN register in southbridge LPC init
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I790cac3ce1101565b64ed54d9c6b50f5e9aa4cf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59524
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IA32_FEATURE_CONTROL does not need to be checked by BIOS, in fact these
bits are needed only by SENTER and SINIT ACM. ACM ENTERACCS does not
check these bits according to Intel SDM. Also noticed that the lock bit
of IA32_FEATURE_CONTROL cannot be cleared by issuing neither global
reset nor full reset on Sandybridge/Ivybridge platforms which results
in a reset loop. However, check the IA32_FEATURE_CONTROL SENTER bits in
ramstage where the register is properly set on all cores already.
TEST=Run ACM SCLEAN on Dell OptiPlex 9010 with i7-3770/Q77
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie9103041498f557b85019a56e1252090a4fcd0c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
There is no real code or feature dependency on
CPU_INTEL_FIRMWARE_INTERFACE_TABLE for Intel TXT.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I2858c8de9396449a0ee30837a98fab05570a6259
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Although TXT specification says to do power cycle reset if TXT_RESET
is set, all Intel provided implementations issue a global reset here.
TEST=Perform ungraceful shutdown after SENTER to trigger SCLEAN path
on Dell OptiPlex 9010 and successfully call ACM SCLEAN.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8ee2400fab20857ff89b14bb7b662a938b775304
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Allow to set global reset bits on other platforms which enable
SOUTHBRIDGE_INTEL_COMMON_ME. In certain Intel TXT flows global reset
instead of full power cycle reset is needed.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I561458044860ee5a26f7d61bcff1c407fa1533f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently there is only a function that dumps GETSEC CAPABILITIES.
Add dumping GETSEC PARAMETER for completeness and additional debug
information.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3b2c8337a8d86000a5b43788840d15146b662598
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Region device is no longer used to locate BIOS ACM. Use new CBFS API
to map and unmap the file. Using rdev_munmap on the uninitialized
region device variable causes the platform to jump to a random address.
TEST=Dell OptiPlex 9010 does not raise #UD exception when Intel TXT is
enabled, ACM SCHECK is successful
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I98afba35403d5d2cd9eeb7df6d1ca0171894e9d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Implement the chipset production fuse state reporting as described in
the Intel TXT Software Development Guide. Also fix all occurrences
where the production fuse state is checked.
TEST=Dell OptiPlex 9010 with i7-3770/Q77 reports the chipset is
production fused
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic86c5a9e1d162630a1cf61435d1014edabf104b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59514
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TXT BIOS Data region version is checked by Trusted Boot code. Older
versions of TBoot (e.g. 1.8.2) may refuse to set up the MLE if BDR
version is not known. Provide an option to set the BDR version in
case an older TBoot code is used. This is very useful for platforms
with TPM 1.2.
TEST=Set BDR version to 4 and successfully boot QubesOS 4.0 with
TBoot 1.8.2 on Dell OptiPlex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic2550bd4008559bd47de9e35f8b1c7b52e6e0f5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Include DPR in the memory map calculations if enabled. DPR is required
for Intel TXT support.
TEST=Boot Debian 10 and see the DPR memory being reserved in E820 and
cbmem logs:
"BIOS-e820: [mem 0x000000007fc09000-0x00000000829fffff] reserved"
"TSEG base 0x80000000 size 8M"
"DPR base 0x7fd00000 size 3M"
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia22e49ba58709acfa0afe0921aa71d83cc06c129
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There is no support for SD card on Corsola reference board, so
we add a configuration to disable SD card initialization to
prevent setting GPIOs in a mistaken way.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia05fd046335c6ce6f9198ddbb7cbda2afc6ae3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
On Chromebooks the RAM code is implemented by the resistor straps
that we can read and decode from ADC. For Corsola the RAM code can be
read from ADC channel 2 and 3.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I485c32dec7b425b604b4063d742a0e37d3961513
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Raise little CPU to 2GHz at romstage.
TEST=check little core cpu frequency is 2GHz
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The types of pwrap_read_field()'s return value and pwrap_write_field()'s
`val` argument are u16, so correct the usage in MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie05ab65ecd9b8ea1379ef74393285c4f5d2db8a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com>
Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Some boards with the chrome EC will need to support more than 4
temperature sensors, so modify the number of TSRs supported when
generating the ACPI code. Note that the EC memory map already has
support for up to 16 TSRs, so no change is required on the EC
side.
BUG=b:207585491
TEST=with previous patch and some test data in brya0 overridetree.cb,
dump the SSDT and verify that all of the existing Methods for TSR0-TSR3
are also added for TSR4, as well as all Notify, etc.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id002230bc872b0f818b0bf2b87987298189c973d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59633
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some boards may use more than 4 temperature sensors for DPTF thermal
control, so this patch adds support for one more temperature sensor.
BUG=b:207585491
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ibf9666bade23b9bb4f740c6c4df6ecf5227cfb45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Kano EVT will exchange i2c port for touchscreen and cr50.
BUG=b:195853169
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I500f0721689ca66b65b8fb1deb79bef2bd988465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
In different sku, some unused GPIO pins are processed by NC for power
consumption.
BUG=b:196790249
TEST=emerge-brya coreboot chromeos-bootimage and check power
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I753e41dec1825299e6cd437b5f67e2d957bc6148
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enabling crashlog helps partners to debug hang issues efficiently.
BUG=b:195327879
TEST=Found BERT table is created and the tcss function is ok in
depthcharge. Warm/cold/suspend_stress test pass 50 cycles on gimble
Change-Id: Ib4bbe5d7cece0c6c5fc170460d55ac820054abb9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
At present the default ROM for for QEMU is too small for U-Boot to fit.
Add a condition to catch this and expand it to a 1MB ROM. This allows
booting U-Boot under emulation.
It also matches the size used by other emulation boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ia1a8c1109e3ece5fec56255173a2d19d4a130bcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59604
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Map existing PCI_DEVICE_ID_INTEL_ADL_P_ID_1 to ADLP 4+4+2 45W SKU power
related settings.
Per doc#626774 ADL_MOW_WW46_2021, update PD optimization relaxation for
ADL-P 482(28W) and 442(45W).
BUG=b:193864533
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ieba738a8ad3da5ae0a115feaa275b997a219d731
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE
clarifies the scope of those definitions. For consistency also add this
prefix to MMIO_DST_FABRIC_ID_SHIFT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register
is bit 12, but that has changed to bit 16 in Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I64c06b84e2c0737b259077e7932f418306638e19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The bit is called REF_CLK_OK_STATE and not RST_CLK_OK_STATE, so change
the name of the define to FCH_AOAC_REF_CLK_OK_STATE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iae26db94d83ebb2cb799f6d3e0bec37c8e849219
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
There were only definitions for removing low, high or both glitches, but
not to not remove glitches, so add this too for completeness.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I650f7754546935539339c02bb6a94bb3f855d4ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
I found the name of the DEB_GLITCH_NONE definition a bit misleading, so
change it to DEB_GLITCH_REMOVE which should clarify what this will do.
The description for this value in the PPR/BKDG is "Remove glitch". This
also puts the define in line with GPIO_DEB_REMOVE_GLITCH which is the
only place where DEB_GLITCH_NONE/DEB_GLITCH_REMOVE is used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59648710e0ff28c2026e1b2cc7e433cafb2f2807
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The DPTF parameters were verified by the thermal team.
BUG=b:207463762
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I634d6d98c28e75ad41488921df6b8e836e253ff1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Those methods were only in the non-common Stoneyridge GPIO ACPI code
that got dropped, so drop those unused methods too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I519d88ffa1d5d4823cce4876ecf59b9019f676e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Stoneyridge uses the same GPIO bank peripheral as Picasso and Cezanne so
we can use the common AMD SoC GPIO ACPI code.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa1fc923cd5b779765917b171b5a7222f18a176a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
De-duplicate the definitions for the pin status bit and use this new
definition in both the C and the ACPI code.
TEST=Timeless build results in identical image for amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8b0fe7dbec5dac176cdfa9690862433f202fb552
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The GPIO_WAKE_* definitions are the ones that are used in the code, so
drop the unused GPIO_*_WAKE_EN definitions for the same bits. Also move
the GPIO_WAKE_* definitions to the place the GPIO_*_WAKE_EN ones were
before this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I622673cc72107908b525a65212061062f32e13dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
All bits covered by the bit masks GPIO_INT_ENABLE_MASK, GPIO_PULL_MASK,
GPIO_STATUS_MASK and GPIO_WAKE_MASK already have definitions in the code
so use those instead of magic numbers.
TEST=Timeless build results in identical image for amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0bc9e1cecf2f063b42de3f8875fee421dd256648
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The definitions of GPIO_INT_ENABLE_STATUS_DELIVERY and
GPIO_TIMEBASE_62440uS fit into 96 characters, so remove the unneeded
line breaks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b9c3885259b9acf0539eed14e23fbbb0deccea7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The corresponding bit is marked as reserved in the following versions of
the documentation for all SoCs using this code:
Mullins: BKDG #52740 Rev 3.05
Stoneyridge: BKDG #55072 Rev 3.04
Raven1, Picasso: PPR #55570 Rev 3.16 & 3.18
Raven2: PPR #55772 Rev 3.08
Cezanne: PPR #56569 Rev 3.03
The old Rev 3.14 of the Picasso PPR #55570 had the bit 19 defined as
PullUpSel, but this is no longer the case in newer versions. It is
unclear if this got de-featured or if it was never present in the
silicon. To be consistent with the current documentation, drop this
define.
This patch also change the definition of GPIO_PULL_MASK to only cover
the bits used for the feature. The Cezanne PPR #56569 Rev 3.03 states a
default value of 0 for this bit after reset, so the resulting values in
the register aren't expected change. The other PPRs/BKDGs don't specify
a reset value for this bit, but it's likely safe to assume that all SoCs
that use the new GPIO interface use the same GPIO building block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaf2d4eec7a13e558c75d7edea343b876909a5b33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
On ADL, we actually use debug consent 2 for soc debug by DBC
Change-Id: Ie6fbf3cdcf5dcd1a11a895ea83f55157a2ac4eb9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update SA table as per latest EDS (Doc no: 601458).
Add extra SKUs accordingly.
Signed-off-by: Rick Lee <rick.lee@intel.com>
Change-Id: Ia2bb9e54456dbea634c2b8e192f9fe813b9e6706
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan
Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
Update thermal setting from thermal team.
BUG=b:205648035
TEST=build and verified by thermal team.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: If5082462b79c88ecf510f7a552381c792604366e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
The cpu_relax method is defined for x86. This CL adds a no-op method so
that it can be used in common code.
BUG=b:179699789
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifcb4546ceb2894eeb37589d0282b7e076d7a4747
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Set power limits for kano based on CPU SKUs.
BUG=b:205648035
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I25cf9be68f8981d8307b4c15ab9f65b59058fb19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch moves common thermal API between chipsets
with thermal device as PCI device and thermal device behind PMC
into common file (thermal_common.c).
Introduce CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV to let SoC
Kconfig to select as applicable for underlying chipset.
+------------------------------------------------------+--------------+
| Thermal Kconfig | SoC |
+------------------------------------------------------+--------------+
| CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV | SKL/KBL, CNL |
| | till ICL |
+------------------------------------------------------+--------------+
| CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC | TGL onwards |
| | ICL |
+------------------------------------------------------+--------------+
Either of these two Kconfig internally selects
CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL to use common thermal APIs.
BUG=b:193774296
TEST=Able to build and boot hatch and adlrvp platform.
Change-Id: I14df5145629ef03f358b98e824bca6a5b8ebdfc6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enable DRIVERS_GENESYSLOGIC_GL9750 support for Gimble.
BUG=b:206014046
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ifc490e6e081b6a8534656417603d2916c3edcb05
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59579
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
commit e0844636ac (acpi: Move ACPI table
support out of arch/x86 (2/5)) moved the main acpi header file from
arch/x86/include/acpi/acpi.h to include/acpi/acpi.h, so change the
comment in here to point to the current location.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5fddd1cd5eefd83816b1c966b5c7edf53eb2486d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Karthikeyan Ramasubramanian